VE-A33-MQ [VICOR]
Analog Circuit, 1 Func, PACKAGE-9;
| 型号： | VE-A33-MQ |
| 厂家： | 
VICOR CORPORATION |
| 描述： | Analog Circuit, 1 Func, PACKAGE-9 输入元件 |
| 文件： | 总5页 (文件大小：192K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data Sheet
VI-IAM™, VE-IAM™
Input Attenuator Modules
Features
VI-IAM Specifications
(Typical at TBP = 25°C, nominal line, 75% load, unless otherwise specified)
•
Inputs: 24, 48 and 300 Vdc
High surge withstand:
•
Input Characteristics
–
–
–
Bellcore
British Telecom BTR 2511
IEC-60801-5
Parameter
Min
Typ
Max
Units
Notes
24 Vdc modules
Steady state input
21
24
32
300
2500
100
38
Vdc
Vdc
–A11– models
•
EMI/RFI specifications:
Per BTNR2571 issue 4
Ringwave 0.5 µs rise 100 kHz
Figure 1
–
–
–
–
Bellcore TR-TSY-000513
British Telecom BTR 2511
FCC Level “A”
Input spike limit
Vdcpk
Vdc
Input surge limit
Overvoltage shut down[a]
Recommended fuse
24 Vdc modules
34
18
Vdc
100 ms, automatic recovery
32 V ACG-20
EN55022 Level “B”
20
Amps
•
•
•
•
•
cULus, CTÜVus
97% efficiency
Logic disable
Expansion output for arrays
Size: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7)
CE Marked
Steady state input
24
36
300
2500
100
42
Vdc
Vdc
–AWW– models
Per BTNR2571 issue 4
Ringwave 0.5 µs rise 100 kHz
Figure 1
Input spike limit
Vdcpk
Vdc
Input surge limit
Overvoltage shut down[a]
Recommended fuse
48 Vdc modules
37
42
Vdc
100 ms, automatic recovery
36 V ACG-20
•
•
20
Amps
RoHS Compliant (VE-IAM)
Steady state input
60
300
2500
160
67
Vdc
Vdc
–A33– models
Product Highlights
Per BTNR2571 issue 4
Ringwave 0.5 µs rise 100 kHz
Figure 1
Input spike limit
The Input Attenuator Module (VI-IAM) is
a component-level, DC input front end
filter designed to occupy minimum board
space while providing maximum protection
for today’s sophisticated electrical systems.
The VI-IAM, in combination with Vicor
24, 48 and 300 Vdc input modules,
provides a highly efficient, high density
power system with outputs from 1 to 95 Vdc
and power expandable from 25 to 800 W.
Your system will benefit from the small
size, efficiency and inherent reliability of
Vicor’s component-level converters, while
meeting the toughest demands of
Vdcpk
Vdc
Input surge limit
Overvoltage shut down[a]
Recommended fuse
48 Vdc modules
62
36
Vdc
100 ms, automatic recovery
60 V 3AB-20
20
Amps
Steady state input
76
300
2500
276
83
Vdc
Vdc
–ANN– models
Per BTNR2571 issue 4
Ringwave 0.5 µs rise 100 kHz
Figure 1
Input spike limit
Vdcpk
Vdc
Input surge limit
Overvoltage shut down[a]
Recommended fuse
300 Vdc modules
77
Vdc
100 ms, automatic recovery
80 V 3AB-20
20
Amps
Steady state input
200
400
1000
2000
800
424
5
Vdc
Vdc
–A66– models
DM, 2 Joule, IAW IEC-801-5
CM, 2 Joule, IAW IEC-801-5
Figure 1
Input spike limit
Vdc
Telecommunications and Industrial
power applications.
Input surge limit
Overvoltage shut down[a]
Recommended fuse
All models
Vdc
402
Vdc
100 ms, automatic recovery
250 V Bussman PC-Tron
Amps
This combination provides compliance
with the transient requirements of
Bellcore, British Telecom and IEC
standards, and meets the EMI/RFI
No load power dissipation
Inrush current
0.5
1.5
Watts
% IIN
110
125
Steady state, lIN 10 ms
specifications of Bellcore, British Telecom
and FCC Part 15, Subpart B and EN55022.
[a]
The VI-IAM disables downstream converters and clamps the converter input voltage at a safe level.
Model Selection Chart
Compatible Products
Model Number
VI-A11-CU/VE-A11-CU
Nominal Input Voltage
Input Range
21 – 32 Vdc
18 – 36 Vdc
42 – 60 Vdc
36 – 76 Vdc
200 – 400 Vdc
Compatible DC-DC Converter Converter
• VI-200, VE-200, VI-J00, VE-J00
(Inputs: 1, W, 3, N and 6)
• Mega Modules
24 Vdc
VI-21x-Cx and VI-J1x-Cx
VI-2Wx-Cx and VI-JWx-Cx
VI-23x-Cx and VI-J3x-Cx
VI-2Nx-Cx and VI-JNx-Cx
VI-26x-Cx and VI-J6x-Cx
C–grade
C–grade
C–grade
C–grade
C–grade
VI-AWW-CU/VE-AWW-CU
VI-A33-CQ/VE-A33-CQ
VI-ANN-CQ/VE-ANN-CQ
VI-A66-CQ/VE-A66-CQ
24 Vdc
48 Vdc
48 Vdc
300 Vdc
(Inputs: 1, W, 3, N and 6)
For additional information see Section 14
of the VI-200 & VI-J00 Design Guide.
Note: For alternative product grades change the “C” in the part number to “E”, “I”, or “M”.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
VI-IAM Input Attenuator Modules
Rev. 1.2
Page 1 of 5
Set your site on VICOR at www.vicorpower.com
SPECIFICATIONS
(typical at T = 25°C, nominal line and 75% load, unless otherwise specified)
BP
OUTPUT CHARACTERISTICS
Parameter
Min
Typ
Max
Units
Test Conditions/Notes
Clamp voltage
36.0
40.5
62.0
80.0
400
44.0
50.0
71
90.0
435
Vdc
Vdc
Vdc
Vdc
Vdc
–A11– models
–AWW– models
–A33– models
–ANN– models
–A66– models
24 Vdc input
48 Vdc input
300 Vdc input
Output power
24 V models
48 V models
300 V models
Internal voltage drop
24 Vdc
250
510
510
Watts
Watts
Watts
Output of IAM
Output of IAM
Output of IAM
0.6
0.6
1.7
0.85
0.95
3.5
Vdc
Vdc
Vdc
48 Vdc
300 Vdc
Overload protection
–AWW–
20
15
20
15
4
Amps
Amps
Amps
Amps
Amps
24 Vdc input
–A11–
–ANN–
–A33–
Foldback threshold; auto recovery
withlatched shut down after 2 ms
48 Vdc input
300 Vdc input –A66–
ISOLATION CHARACTERISTICS
Parameter
Min
Typ
Max
Max
Units
Vrms
Vrms
Test Conditions
1 minute
1 minute
Input to base
1,500
1,500
Output to base
THERMALꢀCHARACTERISTICS
Parameter
Min
Typ
97
Units
%
Test Conditions
Efficiency
Baseplate to sink
0.14
°C/Watt
Operating temperature,
baseplate
100
125
°C
°C
See product grade specifications
See product grade specifications
Storage temperature
MECHANICAL SPECIFICATIONS
Parameter
Weight
PRODUCT GRADE SPECIFICATIONS
Min
Typ
Max
Units
Test Conditions
3.0 (85)
ounces (grams)
Parameter
E
C
I
M
Storage Temp. (Baseplate)
Operating Temp. (Baseplate)
–20°C to +105°C
–10°C to +100°C
–40°C to +105°C
–25°C to +100°C
–55°C to +105°C
–40°C to +100°C
–65°C to +105°C
–55°C to +100°C
EMI CHARACTERISTICS
EMI/ RFI (conducted emissions)
Meets Bellcore TR-TSY-000513, Issue 2, Rev. 1 (24 and 48V Input);
British Telecom BTR 2511, Issue 2 (24 and 48V Input);
FCC Part 15, Class A, EN55022 Class B
TRANSIENTꢀPROTECTION
Meets Bellcore TA-TSY-001003, Issue 1, 9/89
British Telecom BTR 2511, IEC61000-4-5 Level 2 (VI-A66 only)
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
VI-IAM Input Attenuator Modules
Rev. 1.2
Page 2 of 5
Set your site on VICOR at www.vicorpower.com
24 V Inputs
48 V Input
Standard
100V
Wide Range
R.E.
100V
R.E.
160V
I.S.W.
Full Load
S.D.
I.S.W.
Full Load
100V
60V
S.D.
32V
21V
36V
+OUT
+IN
+IN
Normal Operating Area
Normal Operating Area
D1
D2
Q1
18V
100 1000
42V
C2
0.1
1
10ms
0.1
1
10ms 100 1000
GATE OUT
10V
PARALLEL
Vref 1
U2
48 V Wide Range Input
EMI Filter
300 V Input
OV
Vref
2
GATE IN
–OUT
Level
Shift
276V
R.E.
R.E.
OC
Q2
–IN
–IN
800V
U1
I.S.W.
Full Load
I.S.W.
125V
76V
500V
400V
100V
S.D.
Full Load
S.D.
Normal Operating Area
10ms 100
Normal Operating Area
S.D.
200V
0.1
36V
0.1
1
1000
500ms
1
10ms 100 1000
500ms
I.S.W.: Input surge withstand (no disruption of performance)
R.E.: Ratings exceeded
S.D.: Shut down
Figure 2 — Block diagram of Input Attenuator Module (IAM)
Figure 1 — Safe operating area based on input voltage of IAM
(1% duty cycle max., Zs=0.5Ω, for short duration transient
capability refer to specifications.)
4700 pF
F1
F2
+In
+In
+In
Gate In
+Out
Gate In
+
–
Parallel
C1
VI-200/J00
-In
-In
Gate Out
Gate Out
-In
-Out
4700 pF
VI-IAM
Figure 3 — Typical connection diagram. For recommended fuse
(F2) see VI-200 / VI-J00 application manual.
Input Voltage
Maximum Capacitance[a]
Input Voltage
Recommended Fuse
24 V
24 V “W”
48 V
48 V “N”
300 V
20 A / 32 V (AGC-20)
20 A / 36 V (AGC-20)
20 A / 60 V (3AB-20)
20 A / 80 V (3AB-20)
5 A / 250 V Bussman PC-Tron
24 Vdc (21 – 32 V)
24 Vdc (18 – 36 V)
48 Vdc (42 – 60 V)
48 Vdc (36 – 76 V)
300 Vdc (200 – 400 V)
470 µF
470 µF
220 µF
120 µF
27 µF
[a] Capacitance should be distributed across the input of each
DC-DC converter. (C1, Figure 3)
Table 1 — Recommended F1 fusing based on input voltage (see Fig3)
Table 2 — Recommended distributed capacitance on input of DC-
DC converter(s)
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
VI-IAM Input Attenuator Modules
Rev. 1.2
Page 3 of 5
Set your site on VICOR at www.vicorpower.com
MECHANICAL DRAWING
2.28
(57,9)
1.30
0.49
(12,4)
0.080 Dia (2) places
Solder plate
over copper alloy
(33,0)
0.65
(16,5)
0.30 .015
(7,6) (0,38)
Pin #
Function
+In
1
2
3
4
5
6
7
8
9
4
9
+In
–In
–In
3
8
7
6
2.10
(53,4)
2
1.40
1.00 (35,6)
VI-IAM
+Out
0.70
0.40 (17,8)
(10,2)
(25,4)
Gate In
Parallel
Gate Out
–Out
1
5
0.35 0.015
(8,9) (0,38)
0.15
(3,8)
FULL R
0.15
(3,8)
0.040 (1,0) Dia (7) places
Solder plate
over copper alloy
2.40
Product ID
this surface
(61,0)
1.90
(48,3)
0.30
(7,6) Min.
1.75
(44,4) Max.
0.22
(5,6) Min.
+0.030 (0,76)
-0.000 (0)
0.50
(12,7)
.01
0.12
(3,0)
Aluminum Base
Note: For alternate packaging options refer to the mechanical drawing page of vicorpower.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
VI-IAM Input Attenuator Modules
Rev. 1.2
Page 4 of 5
Set your site on VICOR at www.vicorpower.com
Warranty
Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal
use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or maintenance.
Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original purchaser only.
EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the
buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned
without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the product to the
factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty.
Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed
for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability, function,
or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it convey
any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of its components
in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor Terms and Conditions
of Sale, the user of Vicor components in life support applications assumes all risks of such use and indemnifies Vicor against all
damages.
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC
modules and accessory components, fully configurable AC-DC and DC-DC power supplies,
and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its
use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or
malfunction could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available
upon request.
Specifications are subject to change without notice.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent
applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual
Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
VI-IAM Input Attenuator Modules
Rev. 1.2
11/09
Set your site on VICOR at www.vicorpower.com
相关型号：
VE-AIM-C1VE-AIM-C1
AC-DC Unregulated Power Supply Module, 1 Output, 250W, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-9
VICOR
VE-AIM-E1VE-AIM-E1
AC-DC Unregulated Power Supply Module, 1 Output, 250W, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-9
VICOR
VE-AIM-I1VE-AIM-I1
AC-DC Unregulated Power Supply Module, 1 Output, 250W, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-9
VICOR
VE-AIM-M1VE-AIM-M1
AC-DC Unregulated Power Supply Module, 1 Output, 250W, Hybrid, ROHS COMPLIANT, HALF BRICK PACKAGE-9
VICOR
©2020 ICPDF网 联系我们和版权申明