V48C15E150BF2 [VICOR]
48V Input Micro Family DC-DC Converter Module; 48V输入微型系列DC -DC转换器模块型号: | V48C15E150BF2 |
厂家: | VICOR CORPORATION |
描述: | 48V Input Micro Family DC-DC Converter Module |
文件: | 总13页 (文件大小:498K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet
48V Input Micro Family
DC-DC Converter Module
Features
• RoHS Compliant (with F or G pin option)
• DC input range: 36 - 75 V
• Input surge withstand: 100 V for 100 ms
• DC output: 2 – 48 V
• Programmable output: 10 to 110%
• Regulation: 0.3% no load to full load
• Efficiency: Up to 89%
•
Maximum operating temp: 100°C, full load
• Power density: up to 90 W per cubic inch
• Height above board: 0.43 in. (10,9 mm)
• Parallelable, with N+M fault tolerance
• Low noise ZCS/ZVS architecture
Shown actual size:
2.28 x 1.45 x 0.5 in
57,9 x 36,8 x 12,7 mm
Product Overview
Absolute Maximum Ratings
These DC-DC converter modules use
advanced power processing, control and
packaging technologies to provide the
performance, flexibility, reliability and cost
effectiveness of a mature power component.
High frequency ZCS/ZVS switching
provides high power density with low
noise and high efficiency.
Parameter
Rating
Unit
Vdc
Vdc
Vdc
Vdc
Notes
+In to –In voltage
PC to –In voltage
PR to –In voltage
SC to -Out voltage
-0.5 to +105
-0.5 to +7.0
-0.5 to +7.0
-0.5 to +1.5
Isolation voltage
in to out
3000
1500
500
Vrms
Vrms
Vrms
°C
°C
Test voltage
Test voltage
Test voltage
M-Grade
in to base
out to base
Operating Temperature
Storage Temperature
Applications
Distributed power, medical, ATE,
communications, defense, aerospace
-55 to +100
-65 to +125
500 (260)
750 (390)
5 (0.57)
M-Grade
°F (°C)
°F (°C)
in-lbs (N-m)
<5 sec; wave solder
<7 sec; hand solder
6 each
Pin soldering temperature
Mounting torque
Part Numbering
e.g. V48C12T150BL2
For a description of pin
options, see page 11.
V48C
B
Baseplate options include
slotted flanges, threaded
and through-hole.
Product Grade Temperatures (°C)
Grade Operating Storage
Output Power
Pout
50 W
75 W, 50 W
100 W, 75 W, 50W
150 W, 75 W
150 W, 75 W
150 W, 75 W
150 W, 75 W
150 W
Pin Style
Blank: Short Tin/Lead
L: Long Tin/Lead
S: Short ModuMate
N: Long ModuMate
F: Short RoHS
Baseplate
Blank: Slotted
2: Threaded
Output Voltage
Vout
2 V
3.3 V
5 V
12 V
15 V
24 V
28 V
36 V
48 V
See page 12 for dimensions.
For other package sizes and
power levels, see the Mini
(half size) and Maxi (full
size) datasheets.
2 = 2 V
3 V 3 = 3.3 V
5 = 5 V
12 = 12 V
15 = 15 V
24 = 24 V
28 = 28 V
36 = 36 V
48 = 48 V
E
C
T
=
=
=
=
=
-
-
-
-
-
10 to +100
20 to +100
40 to +100
40 to +100
55 to +100
-
20 to +125
40 to +125
40 to +125
55 to +125
65 to +125
-
-
-
-
3: Through-hole
H
M
G: Long RoHS
150 W, 75 W
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 1 of 13
Set your site on VICOR at vicorpower.com
MODULE FAMILY ELECTRICAL CHARACTERISTICS
Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature,
unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate.
MODULE INPUT SPECIFICATIONS
Parameter
Min
36
Typ
48
Max
75
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
mA
Notes
Operating input voltage
Input surge withstand
Undervoltage turn-on
Undervoltage turn-off
Overvoltage turn-off/on
Disabled input current
100
35.7
<100 ms
34.9
30.5
78.8
29.4
75.7
82.5
2.5
PC pin low
MODULE OUTPUT SPECIFICATIONS
Parameter
Output voltage setpoint
Line regulation
Min
Typ
Max
1ꢀ
0.2
Unit
Vout nom.
ꢀ
Notes
Nominal input; full load; 25°C
Low line to high line; full load
Over operating temperature range
10 to 100ꢀ of full load
0.02
0.002
2
Temperature regulation
Power sharing accuracy
0.005
5
ꢀ / °C
ꢀ
Of nominal output voltage. For trimming below 90ꢀ
of nominal, a minimum load of 10ꢀ of maximum
rated power may be required.
Programming range
10
110
ꢀ
+Out to –Out — Absolute Maximum Ratings
2 V
-0.5 to 3.1
-0.5 to 4.7
-0.5 to 7.0
-0.5 to 16.1
-0.5 to 20.0
-0.5 to 31.7
-0.5 to 36.9
-0.5 to 47.1
-0.5 to 62.9
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
3.3 V
5 V
12 V
15 V
24 V
28 V
36 V
48 V
Note: For important information relative to applications where the converter modules are subject to continuous dynamic loading,
contact Vicor applications engineering at 800-927-9474.
THERMAL RESISTANCE AND CAPACITY
Parameter
Min
Typ
0.24
0.21
10.9
2.8
Max
Unit
°C/Watt
°C/Watt
°C/Watt
°C/Watt
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20265)
Baseplate to ambient
Baseplate to ambient; 1000 LFM
Thermal capacity
48
Watt-sec/°C
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 2 of 13
Set your site on VICOR at vicorpower.com
MODULE FAMILY ELECTRICAL CHARACTERISTICS (CONT.)
MODULE CONTROL SPECIFICATIONS
Parameter
Min
Typ
Max
Unit
Notes
PRIMARY SIDE (PC = Primary Control; PR = Parallel)
PC bias voltage
current limit
5.50
1.5
5.75
2.1
6.00
3.0
Vdc
mA
PC current = 1.0 mA
PC voltage = 5.5 V
PC module disable
PC module enable delay
PC module alarm
2.3
2.6
4
2.9
7
Vdc
ms
Must be able to sink ≥4 mA. See Fig. 1
0.5
1.1
6.1
Vavg
MΩ
UV, OV, OT, module fault. See Figs. 2 and 4
See Fig. 2
PC resistance
0.9
5.7
1.0
5.9
PR emitter amplitude
PR emitter current
PR receiver impedance
PR receiver threshold
PR drive capability
Volts
mA
PR load >30 Ω, <30 pF
150
375
2.4
500
2.5
625
2.6
12
Ω
25°C
Volts
modules
Minimum pulse width: 20 ns
Without PR buffer amplifier
SECONDARY SIDE (SC = Secondary Control)
SC bandgap voltage
SC resistance
1.21
990
1.23
1000
0.033
1.25
Vdc
Ω
Referenced to –Out
1010
SC capacitance
µF
SC module alarm
0
Vdc
With open trim; referenced to –Out. See Fig. 6
MODULE GENERAL SPECIFICATIONS
Parameter
Min
3000
1500
500
Typ
Max
Unit
Vrms
Vrms
Vrms
Notes
Isolation voltage (in to out)
Isolation voltage (in to base)
Isolation voltage (out to base)
Complies with reinforced insulation requirements
Complies with basic insulation requirements
Complies with operational insulation requirements
Isolation resistance (in to out)
10
MΩ
2.1
2.3
2.5
ounces
(grams)
Weight
(58.7)
(65.2)
(71.7)
Temperature limiting
100
115
°C
See Figs. 2 and 4
UL60950-1, CSA0950-1, EN60950-1, IEC60950-1.
Agency approvals
cURus, TÜV, CE
With appropriate fuse in series with the +Input
Note:
Specifications are subject to change without notice.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 3 of 13
Set your site on VICOR at vicorpower.com
MODULE SPECIFIC OPERATING SPECIFICATIONS
2 Vout, 50 W (e.g. V48C2C50BL)
Parameter
Min
Typ
77
Max
Unit
ꢀ
Notes
Efficiency
76
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
85
106
2.9
4.9
0.2
25
mV
2.7
2.8
3.3
0.02
Volts
Watts
ꢀ
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
25.3
17.5
28.8
28.8
35
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
35
3.3 Vout, 75 W (e.g. V48C3V3C75BL)
Parameter
Min
Typ
81.5
75
Max
Unit
ꢀ
Notes
Efficiency
80.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
94
mV
4.14
4.3
3
4.46
4.5
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
22.7
31.8
31.8
Amps
Amps
Amps
Current limit
22.9
15.9
26.2
26.2
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
3.3 Vout, 50 W (e.g.V48C3V3C50BL)
Parameter
Min
Typ
79.6
75
Max
Unit
ꢀ
Notes
Efficiency
78
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
94
4.46
3.7
mV
4.14
4.3
Volts
Watts
ꢀ
2.9
0.02
0.2
No load to full load; nominal input
0
15.15
20.6
20.6
Amps
Amps
Amps
Current limit
15.5
10.6
17.5
17.5
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
5 Vout, 100 W (e.g. V48C5C100BL)
Parameter
Min
Typ
85
Max
Unit
ꢀ
Notes
Efficiency
83
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
70
88
6.47
5
mV
6.03
6.25
3.3
Volts
Watts
ꢀ
0.02
0.3
20
No load to full load; nominal input
0
Amps
Amps
Amps
Current limit
20.4
14
23
23
26
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
26
5 Vout, 75 W (e.g. V48C5C75BL)
Parameter
Min
Typ
83
Max
Unit
ꢀ
Notes
Efficiency
82
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
100
6.25
3
125
6.47
4.5
mV
6.03
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
15
Amps
Amps
Amps
Current limit
15.3
10.5
17.3
17.3
19.5
19.5
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 4 of 13
Set your site on VICOR at vicorpower.com
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
5 Vout, 50 W (e.g. V48C5C50BL)
Parameter
Min
Typ
84.5
85
Max
Unit
ꢀ
Notes
Efficiency
83.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
106
6.47
2.4
0.2
10
mV
6.03
6.25
1.6
Volts
Watts
ꢀ
0.02
No load to full load; nominal input
0
10.2
7
Amps
Amps
Amps
Current limit
11.5
11.5
13
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
13
12 Vout, 150 W (e.g. V48C12C150BL)
Parameter
Min
Typ
88
Max
Unit
ꢀ
Notes
Efficiency
87
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
170
14.3
3.5
212
14.9
5.3
mV
13.7
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
12.5
16.3
16.3
Amps
Amps
Amps
Current limit
12.7
8.75
14.4
14.4
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
12 Vout, 75 W (e.g. V48C12C75BL)
Parameter
Min
Typ
85.8
180
14.3
2.6
Max
Unit
ꢀ
Notes
Efficiency
83.6
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
225
14.9
3.8
mV
13.7
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
6.25
8.44
8.44
Amps
Amps
Amps
Current limit
6.37
4.37
7.19
7.19
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
15 Vout, 150 W (e.g. V48C15C150BL)
Parameter
Min
Typ
87.5
120
17.8
4
Max
Unit
ꢀ
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
150
18.5
6
mV
17.1
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
10.2
7
10
Amps
Amps
Amps
Current limit
11.5
11.5
13.5
13.5
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
15 Vout, 75 W (e.g. V48C15C75BL)
Parameter
Min
Typ
88.6
80
Max
Unit
ꢀ
Notes
Efficiency
87
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
100
18.5
3.9
mV
17.1
17.8
2.6
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
5
Amps
Amps
Amps
Current limit
5.1
3.5
5.75
5.75
6.75
6.75
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 5 of 13
Set your site on VICOR at vicorpower.com
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
24 Vout, 150 W (e.g. V48C24C150BL)
Parameter
Min
Typ
88.5
220
28.1
4.3
Max
Unit
ꢀ
Notes
Efficiency
87.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
275
29.1
6.3
mV
27.1
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
6.25
8.13
8.13
Amps
Amps
Amps
Current limit
6.37
4.06
7.19
7.19
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
24 Vout, 75 W (e.g. V48C24C75BL)
Parameter
Min
Typ
87.3
48
Max
Unit
ꢀ
Notes
Efficiency
86
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
60
mV
27.1
28.1
3
29.1
3.6
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
3.13
4.23
4.23
Amps
Amps
Amps
Current limit
3.19
0.5
3.6
3.6
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
28 Vout, 150 W (e.g. V48C28C150BL)
Parameter
Min
Typ
88.5
110
32.7
3
Max
Unit
ꢀ
Notes
Efficiency
87.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
138
33.9
4.5
mV
31.5
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
5.36
6.97
6.97
Amps
Amps
Amps
Current limit
5.46
3.75
6.16
6.16
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
28 Vout, 75 W (e.g. V48C28C75BL)
Parameter
Min
Typ
88.4
200
32.7
4.5
Max
Unit
ꢀ
Notes
Efficiency
87
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
250
33.9
6
mV
31.5
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
2.67
3.62
3.62
Amps
Amps
Amps
Current limit
2.73
1.87
3.08
3.08
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
36 Vout, 150 W (e.g. V48C36C150BL)
Parameter
Min
Typ
87.6
80
Max
Unit
ꢀ
Notes
Efficiency
86.2
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
100
43.4
6.2
mV
40.4
41.9
3.9
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
4.17
5.63
5.63
Amps
Amps
Amps
Current limit
4.25
2.91
4.8
4.8
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 6 of 13
Set your site on VICOR at vicorpower.com
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
48 Vout, 150 W (e.g. V48C48C150BL)
Parameter
Min
Typ
89
Max
Unit
ꢀ
Notes
Efficiency
88
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
92
115
57.7
6.3
mV
53.7
55.7
4.2
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
3.13
4.5
Amps
Amps
Amps
Current limit
3.19
2.19
3.6
3.6
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
4.5
48 Vout, 75 W (e.g. V48C48C75BL)
Parameter
Min
Typ
87.9
128
55.7
3.7
Max
Unit
ꢀ
Notes
Efficiency
86.5
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwith
25°C; recycle input voltage to restart (>100 ms off)
No load
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
160
57.7
4.5
mV
53.7
Volts
Watts
ꢀ
0.02
0.2
No load to full load; nominal input
0
1.56
2.11
2.11
Amps
Amps
Amps
Current limit
1.59
1.09
1.79
1.79
Output voltage 95ꢀ of nominal
Output voltage <250 mV
Short circuit current
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 7 of 13
Set your site on VICOR at vicorpower.com
CONTROL FUNCTIONS - PC PIN
Module Enable/Disable
Module Alarm
The module may be disabled by pulling PC below 2.3 V with
respect to the –Input. This may be done with an open collector
transistor, relay, or optocoupler. Multiple converters may be
disabled with a single transistor or relay either directly or via
“OR’ing” diodes. See Figure 1.
The module contains “watchdog” circuitry which monitors
input voltage, operating temperature and internal operating
parameters. In the event that any of these parameters are
outside of their allowable operating range, the module will
shut down and PC will go low. PC will periodically go high
and the module will check to see if the fault (as an example,
overtemperature) has cleared. If the fault has not been cleared,
PC will go low again and the cycle will restart. The SC pin
will go low in the event of a fault and return to its normal
state after the fault has been cleared. See Figures 2 and 4.
Primary Auxiliary Supply
At 5.7 V, PC can source up to 1.5 mA. In the example shown
in Figure 3, PC powers a module enabled LED.
Input Undervoltage
[a]
Input Overvoltage
Over Temperature
Module Faults
+IN
+OUT
+In
PC
Auto
Restart
SW1
50 Ω
PC
PR
2-20 ms typ.
f(VIN
)
SC
1 K
6 K
SW2
SW3
PR
5.7 Vdc
1 M
(0-3 mA)
Disable
1.23
Vdc
–IN
–OUT
SW1, 2, & 3 shown
in "Fault" position
–In
Disable = PC <2.3V
[a] Not applicable for 300 Vdc Input family
Figure 1 — Module enable/disable.
Figure 2 — PC/SC module alarm logic.
+In
PC
Fault
40μs typ.
5.7V
PC
4kΩ
"Module
Enabled"
PR
1.23V
2-20ms typ.
SC
–In
Figure 3 — LED on-state indicator.
Figure 4 — PC/SC module alarm timing.
+OUT
Comparator
+In
Optocoupler
PC
SC
Alarm
PR
–In
4kΩ
1.00 V
–OUT
Figure 5 — Isolated on-state indicator.
Figure 6 — Secondary side on-state indicator.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 8 of 13
Set your site on VICOR at vicorpower.com
CONTROL FUNCTIONS - SC PIN
Output Voltage Programming
The output voltage of the converter can be adjusted or
programmed via fixed resistors, potentiometers or voltage
DACs. See Figures 7 and 8.
+OUT
+OUT
RU
Trim Up
Error
Amp
Error
Amp
Load
Load
SC
SC
RD
Trim Down
1 kΩ
0.033 μF
1 kΩ
0.033 μF
–OUT
–OUT
1.23 V
1.23 V
1,000 (Vout –1.23) Vnom
1.23 (Vout – Vnom)
RU (ohms) =
– 1,000
1,000 Vout
Vnom – Vout
R
D (ohms) =
Figure 7 — Output voltage trim down circuit.
Figure 8 — Output voltage trim up circuit.
Trim Down
Trim Up
1. This converter is not a constant power device – it has a
constant current limit. Hence, available output power is
reduced by the same percentage that output voltage is
trimmed down. Do not exceed maximum rated output current.
1. The converter is rated for a maximum delivered power. To
ensure that maximum rated power is not exceeded, reduce
maximum output current by the same percentage increase in
output voltage.
2. The trim down resistor must be connected to the –Out pin.
2. The trim up resistor must be connected to the +Out pin.
3. Do not trim the converter above maximum trim range
(typically +10%) or the output over voltage protection
circuitry may be activated.
Trim resistor values calculated automatically:
On-line calculators for trim resistor values are available
on the vicor website at: vicorpower.com/tools.
Resistor values can be calculated for fixed trim up,
fixed trim down and for variable trim up or down.
In addition to trimming information, the web site and
the Applications Manual also include design tips,
applications circuits, EMC suggestions, thermal design
guidelines and PDF data sheets for all available Vicor
products.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 9 of 13
Set your site on VICOR at vicorpower.com
CONTROL FUNCTIONS - PR PIN
Parallel Operation
+In
+Out
The PR pin supports paralleling for increased power with N+1
(N+M) redundancy and phased array capability. Modules of
the same input voltage, output voltage, and power level will
current share if all PR pins are suitably interfaced.
PC
PR
Module 1
SC
–In
–Out
Compatible interface architectures include the following:
+In
+Out
DC coupled single-wire interface. All PR pins are directly
connected to one another. This interface supports current
sharing but is not fault tolerant. Negative In pins must be tied
to the same electric potential. Up to three converters may be
paralleled by this method. See Figure 9.
Module 2
(up to 12)
PC
PR
SC
–In
–Out
Ground plane
Figure 9 — DC coupled single-wire interface.
AC coupled single-wire interface. All PR pins are connected
to a single communication bus through 0.001 µF (500 V)
capacitors. This interface supports current sharing and is fault
tolerant except for the communication bus. Up to three
converters may be paralleled by this method. See Figure 10.
+In
+Out
0.001μF
PC
PR
Module 1
SC
Transformer coupled interface. For paralleling four or more
converters a transformer coupled interface is required. For
details on this configuration please refer to the design guide
referenced in the following technical information section.
–In
–Out
+In
+Out
0.001μF
Module 2
(up to 12)
PC
PR
SC
Technical Information
–In
–Out
For additional technical information contained in the Design
Guide and Applications Manual for Maxi, Mini, Micro Family
DC-DC Converters and Accessory Modules, click on the link
below:
Ground plane
Figure 10 — AC coupled single-wire interface.
http://www.vicorpower.com/mmmguide
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 10 of 13
Set your site on VICOR at vicorpower.com
CONTROL FUNCTIONS - PR PIN (CONT.)
+OUT
• The +Out and –Out
Plane
power buses should be
designed to minimize
and balance parasitic
impedance from each
module output to the
load.
Module #1
Designated
Master
+Out
SC
SC
+S
R7 21.0 k
C3
R4
–OUT
R9
R1
R8
C2
0.22 µF
4.02 k
R3
U2
R5
U1
R2
2.55 k
TLV431
Vcc
1.00 k
R6
1.65 k
R Load
–
–
R11
36.5 k
C1
470 pF
+OUT
SC
200 mV
+
+
R10
1.24 k
PS2701
U3
LM10
• At the discretion of the
power system designer,
a subset of all modules
within an array may be
configured as slaves by
shorting SC to –Out.
Gnd
L
O
A
D
Module #2
trimmed
down 2 %
–S
–Out
See Component Selection section below.
–OUT
• This module is designed for point of load regulation, where remote sensing
is not required. Active voltage drop compensator, as shown here, may be
used in applications with significant distribution losses.
+OUT
SC
• Do not use output
ORʼing diodes with
MicroMods.
Module #3
trimmed
down 4 %
Ground
Plane
Please consult with the Micro Family Isolated Remote Sense Application Note
for additional information.
–OUT
Figure 11 — N+1 module array output connections.
Figure 12 — Voltage drop compensation.
PIN STYLES*
Designator
(None)
Description
Notes
Short Tin/Lead
Long Tin/Lead
Short ModuMate
Long ModuMate
Short RoHS
Requires in-board, mounting
On-board mounting for 0.065" boards
SurfMate or in-board socket mounting
On-board socket mounting
Select for RoHS compliant in-board solder, socket, or SurfMate mounting
Select for RoHS compliant on-board solder or socket mounting
L
S
N
F
G
Long RoHS
*
Pin style designator follows the “B” after the output power and precedes the baseplate designator.
Ex. V48C12T150BN2 — Long ModuMate Pins
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 11 of 13
Set your site on VICOR at vicorpower.com
MECHANICAL DRAWINGS
Converter Pins
No. Function Label
1
2
+In
+
Primary
PC
Control
3
4
5
Parallel
–In
PR
–
–Out
–
Secondary
6
7
SC
+
Control
+Out
Figure 13 —Module outline
ALL MARKINGS
THIS SURFACE
0.062 0.010
PCB THICKNESS
1,57 0,25
0.800*
20,32
INBOARD
SOLDER
MOUNT
ONBOARD
SOLDER
MOUNT
0.525*
13,34
PLATED
0.275*
6,99
SHORT PIN STYLE
0.094 0.003
LONG PIN STYLE
ALUMINUM
BASEPLATE
THRU HOLE
DIA
0.094 0.003
(7X)
0.145*
3,68
2,39 0,08
2,39 0,08
PINS STYLES
0.133
3,38
SOLDER:TIN/LEAD
HOT SOLDER DIPPED
1
7
2
3
4
5
MODUMATE: GOLD PLATED COPPER
RoHS: GOLD PLATED COPPER
1.734**
44,04
2.000*
50,80
FOR SOLDERING METHODS AND PROCEDURES
PLEASE REFER TO THE MAXI, MINI, MICRO
DESIGN GUIDE.
6
0.06
Unless otherwise specified,
dimensions are in inches
mm
R
(4X)
1,5
0.53
13,5
0.43
10,9
.400*
10,16
0.003
0,08
*DENOTES TOL =
**PCB WINDOW
Decimals
Tol.
Angles
1.090**
27,69
0.XX
0.01
0.25
0.005
0.127
1°
0.XXX
Figure 14 —PCB mounting specifications
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
Page 12 of 13
Set your site on VICOR at vicorpower.com
Warranty
Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal
use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or
maintenance. Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original
purchaser only.
EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE.
Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the
buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products
returned without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the
product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty.
Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability,
function, or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither
does it convey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of
its components in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor
Terms and Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and
indemnifies Vicor against all damages.
Vicor’s comprehensive line of power solutions includes high density AC-DC
and DC-DC modules and accessory components, fully configurable AC-DC
and DC-DC power supplies, and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its
use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or
malfunction could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available
upon request.
Specifications are subject to change without notice.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent
applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual
Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
48V Micro Family
Rev. 7.5
4/09
Set your site on VICOR at vicorpower.com
相关型号:
©2020 ICPDF网 联系我们和版权申明