V48C12E48BN [VICOR]

FasTrak Micro E-Grade Family DC-DC Converter Module; 的FasTrak微E级系列DC- DC转换器模块


型号：	V48C12E48BN
厂家：	VICOR CORPORATION
描述：	FasTrak Micro E-Grade Family DC-DC Converter Module 的FasTrak微E级系列DC- DC转换器模块转换器
文件：	总8页 (文件大小：242K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Data Sheet

FasTrak Micro E-Grade Family

DC-DC Converter Module

Features

• Input voltages: 24, 48, 300 & 375 V

• DC outputs: 3.3 V – 48 V

• Programmable output: 10 to 110%

• Regulation: 0.5% no load to full load

• Efficiency: Up to 88%

• Max operating temp: 100°C, full load

• Power Density: Up to 90 W/cubic Inch

• Parallelable, with N+M fault tolerance

• Low noise ZCS/ZVS architecture

Shown actual size:

2.28 x 1.45 x 0.5 in

57,9 x 36,8 x 12,7 mm

Product Overview

These DC-DC converter modules use

advanced power processing, control and

packaging technologies to provide the

performance, flexibility, reliability and

cost effectiveness of a mature power

component. High frequency ZCS/ZVS

switching provide high power density

with low noise and high efficiency.

Absolute Maximum Ratings

Parameter

Rating

Unit

Notes

Applications

+In to –In voltage

24 Vin

Off-line systems with autoranging or

PFC front-ends, industrial and process

control, distributed power, medical, ATE,

communications, defense, aerospace

-0.5 to +36

-0.5 to +75

-0.5 to +375

-0.5 to +425

-0.5 to +7.0

-0.5 to +1.5

1.0

Vdc

48 Vin

300 Vin

Vdc

375 Vin

Vdc

Part Numbering

PC to –In voltage

PR to –In voltage

SC to –Out voltage

–Sense to –Out voltage

Isolation voltage (in to out)

Isolation voltage (in to base)

Isolation voltage (out to base)

Operating temperature

Storage temperature

Pin soldering temperature

Mounting torque

Vdc

e.g. V300C12E150BL2

Vdc

Output Voltage

Pin Style

Input Voltage

3V3: 3.3V

5: 5 V

Blank: Short

24: 18 – 36 Vin

48: 36 – 75 Vin

300: 180 – 375 Vin

375: 250 – 425 Vin

3000

Vrms

°C

Tin/Lead

12: 12 V

15: 15 V

24: 24 V

28: 28 V

48: 48 V

L: Long Tin/Lead

S:Short Gold

N:Long Gold

1550

500

-10 to +100

-20 to +125

500 (260)

750 (390)

5 (0.57)

°C

Output Power (Watts)

Baseplate

°F (°C)

in-lbs (N-m)

<5 sec; wave solder

<7 sec; hand solder

6 each, # 4-40 or M3

Input 3.3 Vout

5 Vout

100

>5 Vout

100

150

Blank: Slotted

1: Threaded

2: Through-hole

24 V

48 V

300 V

375 V

150

Thermal Resistance and Capacity

For a description of pin options, see page 6.

Baseplate options include slotted flanges,

threaded and through-hole. See page 7

for dimensions. For other package sizes

and powerlevels, see the FasTrak Maxi

(full size) and FasTrak Micro (quarter

size) datasheets.

Parameter

Min

Typ

0.24

0.21

10.9

2.8

Max

Unit

°C/Watt

Baseplate to sink; flat, greased surface

Baseplate to sink; thermal pad (P/N 20263)

Baseplate to ambient

°C/Watt

Baseplate to ambient; 1000 LFM

Thermal capacity

°C/Watt

Watt-sec/°C

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FasTrak Mini E-Grade Family

Rev. 1.0

Page 1 of 8

Set your site on VICOR at www.vicorpower.com

ELECTRICAL CHARACTERISTICS

Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature,

unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate.

MODULE OPERATING SPECIFICATIONS

Parameter

Input voltage

24 Vin

Min

Typ

Max

Surge Withstand

Unit

Notes

Vdc

<100 ms surge withstand

48 Vin

100

400

500

300 Vin

180

250

300

375

425

±1

375 Vin

Output voltage setpoint

Nominal input; full load; 25°C

MODULE OUTPUT VOLTAGE RELATED SPECIFICATIONS

Parameter

3.3V

12V

15V

24V

28V

48V

Unit

Notes

Efficiency (typ.)

76.5

80.0

84.0

85.5 86.0

86.5

88.0

Nominal input; 80% load; 25°C

Nominal input; full load;

25°C; 20MHz BW

Ripple and noise, p-p (typ.)

Output OVP setpoint (nom.)

120

4.3

105

6.3

170

150

180

25°C; recycle input voltage to

restart ( 1 minute off )

14.3

17.8 28.1

32.7

55.7

Volts

Dissipation, standby (typ.)

Load regulation (max.)

Current limit (typ.)

3.4

0.4

115

4.4

0.4

115

5.0

0.2

115

7.0

0.2

115

4.9

0.2

115

4.6

0.3

115

4.0

0.2

115

Watts

±% Vout

% Iout

No load; nominal input

No load to full load; nominal input

Output voltage 95% of nominal

Short circuit current (typ.)

115

% Iout.

Output voltage <250mV

MODULE INPUT SPECIFICATIONS

Parameter

24 Vin

17.5

48 Vin

34.9

300 Vin

175

375 Vin

243

Units

Vdc

Notes

Undervoltage turn-on

Undervoltage turn-off

Overvoltage turn-off/on

Typical value

15.3

30.5

153

212

Vdc

37.8

78.8

N/A

446

Vdc

Note: 300 Vin models do not have overvoltage turn-off.

MODULE OUTPUT SPECIFICATIONS

Parameter

Min

Typ

±0.5

Max

Unit

Notes

Line regulation

Low line to high line; full load

Over operating temperature range

10 to 100% of full load

Temperature regulation

Power sharing accuracy

±0.005

±5

% / °C

Of nominal output voltage. For trimming below

90% of nominal, a minimum load of 10% of

maximum rated power may be required.

Programming range

110

Note: For important information relative to applications where the converter modules are subject to continuous dynamic loading,

contact Vicor applications engineering at 800-927-9474.

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FasTrak Mini E-Grade Family

Rev. 1.0

Page 2 of 8

Set your site on VICOR at www.vicorpower.com

ELECTRICAL CHARACTERISTICS, continued

MODULE CONTROL SPECIFICATIONS

Parameter

Min

Typ

Max

Unit

Notes

PRIMARY SIDE (PC = Primary Control; PR = Parallel)

PC bias voltage

current limit

5.50

1.5

5.75

2.1

6.00

3.0

Vdc

PC current = 1.0 mA

PC voltage = 5.5V

PC module disable

PC module enable delay

PC module alarm

2.3

2.6

2.9

Vdc

Must be able to sink ≥4 mA. See Fig. 1

0.5

6.1

Vavg

Volts

UV, OV, OT, module fault. See Figs. 2 and 4

PR load >30 ohms, < 30 pF

PR emitter amplitude

PR emitter current

5.7

150

375

2.4

5.9

PR receiver impedance

PR receiver threshold

PR drive capability

500

2.5

625

2.6

ohms

Volts

modules

25°C

Minimum pulse width: 20ns

Without PR buffer amplifier

SECONDARY SIDE (SC = Secondary Control)

SC bandgap voltage

SC resistance

1.21

990

1.23

1000

0.033

1.25

Vdc

ohms

µF

Referenced to –Out

1010

SC capacitance

SC module alarm

Vdc

With open trim; referenced to –Out. See Fig. 6

MODULE GENERAL SPECIFICATIONS

Parameter

Min

3000

1550

500

Typ

Max

Unit

Vrms

Notes

Isolation voltage (in to out)

Isolation voltage (in to base)

Isolation voltage (out to base)

Complies with reinforced insulation requirements

Complies with basic insulation requirements

Complies with operational insulation requirements

Isolation resistance (in to out)

Weight

2.1 (60)

115

megohms

2.3(66) ounces (grams)

°C

Temperature limiting

100

See Figs. 2 and 4

UL60950, CSA0950, EN60950, IEC60950.

With a fuse in series with the +Input

Agency approvals

cULus, TÜV, CE

Note:

Specifications are subject to change without notice.

The latest data sheets for individual models are available on the Vicor website at vicorpower.com.

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FasTrak Mini E-Grade Family

Rev. 1.0

Page 3 of 8

Set your site on VICOR at www.vicorpower.com

CONTROL FUNCTIONS - PC PIN

Module Enable/Disable

Module Alarm

The module may be disabled by pulling PC below 2.3V with

respect to the –Input. This may be done with an open collector

transistor, relay, or optocoupler. Multiple converters may be

disabled with a single transistor or relay either directly or via

“OR’ing” diodes. See Figure 1.

The module contains “watchdog” circuitry which monitors

input voltage, operating temperature and internal operating

parameters. In the event that any of these parameters are

outside of their allowable operating range, the module will shut

down and PC will go low. PC will periodically go high and the

module will check to see if the fault (as an example,

overtemperature) has cleared. If the fault has not been cleared,

PC will go low again and the cycle will restart. The SC pin will

go low in the event of a fault and return to its normal state after

the fault has been cleared. See Figures 2 and 4.

Primary Auxiliary Supply

At 5.7V, PC can source up to 1.5mA. In the example shown in

Figure 3, PC powers a module enabled LED.

Input Undervoltage

Input Overvoltage

Over Temperature

+In

+Out

+In

Module Faults

Auto

Restart

SW1

50Ω

2-20ms typ.

f(V

)

SW2

SW3

5.7Vdc

(0-3mA)

Disable

1.23

Vdc

–In

–Out

SW1, 2, & 3 shown

in "Fault" position

–In

Disable = PC <2.3V

Figure 1—Module enable/disable.

Figure 2—PC/SC module alarm logic.

+In

Fault

40μs typ.

5.7V

4kΩ

"Module

Enabled"

1.23V

2-20ms typ.

–In

Figure 3—LED on-state indicator.

Figure 4—PC/SC module alarm timing.

+Out

+In

Optocoupler

Alarm

–In

4kΩ

1.00V

–Out

Figure 5—Isolated on-state indicator.

Figure 6—Secondary side on-state indicator.

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FasTrak Mini E-Grade Family

Rev. 1.0

Page 4 of 8

Set your site on VICOR at www.vicorpower.com

CONTROL FUNCTIONS - SC PIN

Output Voltage Programming

The output voltage of the converter can be adjusted or

programmed via fixed resistors, potentiometers or voltage

DACs. See Figures 7 and 8.

+Out

R_U

Trim Up

Error

Amp

Error

Amp

Load

R_D

Trim Down

1kΩ

0.033μF

1kΩ

0.033μF

–Out

1.23V

1,000 Vout

1,000 (Vout-1.23) Vnom

1.23 (Vout-Vnom)

(ohms) =

–

1,000

(ohms) =

Vnom - Vout

Figure 7—Output voltage trim down circuit.

Figure 8—Output voltage trim up circuit.

Trim Down

Trim Up

1. This converter is not a constant power device – it has a

constant current limit. Hence, available output power is

reduced by the same percentage that output voltage is

trimmed down. Do not exceed maximum rated output current.

1. The converter is rated for a maximum delivered power. To ensure

that maximum rated power is not exceeded, reduce maximum

output current by the same percentage increase in output voltage.

2. The trim up resistor must be connected to the +Out pin.

2. The trim down resistor must be connected to the –Out pin.

3. Do not trim the converter above maximum trim range

(typically +10%) or the output over voltage protection

circuitry may be activated.

Trim resistor values calculated automatically:

On-line calculators for trim resistor values are available

on the vicor website at: vicorpower.com/tools.html.

Resistor values can be calculated for fixed trim up, fixed

trim down and for variable trim up or down cases for both

1st and 2nd Generation DC-DC converters.

In addition to trimming information, the web site and the

Applications Manual also include design tips, applications

circuits, EMC suggestions, thermal design guidelines and

PDF data sheets for all available Vicor products.

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FasTrak Mini E-Grade Family

Rev. 1.0

Page 5 of 8

Set your site on VICOR at www.vicorpower.com

CONTROL FUNCTIONS - PR PIN

Parallel Operation

sharing but is not fault tolerant. Minus In pins must be tied to

the same electric potential. See Figure 9.

The PR pin supports paralleling for increased power with N+1

(N+M) redundancy and phased array capability. Modules of

the same input voltage, output voltage, and power level will

current share if all PR pins are suitably interfaced.

AC coupled single-wire interface. All PR pins are connected

to a single communication bus through 0.001µF (500V)

capacitors. This interface supports current sharing and is fault

tolerant except for the communication bus. See Figure 10.

Compatible interface architectures include the following:

DC coupled single-wire interface. All PR pins are directly

connected to one another. This interface supports current

+In

+Out

+In

+Out

0.001µF

Module 1

–In

–Out

–In

–Out

+In

+Out

+In

+Out

Module 2

(up to 12)

Module 2

(up to 12)

0.001µF

–In

–Out

–In

–Out

Ground plane

Figure 10—AC coupled single-wire interface.

Figure 9—DC coupled single-wire interface.

+Out

Plane

• The +Out and –Out

+Out

power buses should be

designed to minimize

and balance parasitic

impedance from each

module output to the

load.

–Out

Load

LM10

1.05KΩ

200Ω

+Out

1.2KΩ

• At the discretion of the

power system designer,

a subset of all modules

within an array may be

configured as slaves by

shorting SC to –Out.

–Out

+Out

• Do not use output

OR’ing diodes with

MicroMods.

• This module is designed for point of load regulation, where remote sensing

is not required. Active voltage drop compensator, as shown here, may be

used in applications with significant distribution losses. Details of this circuit

are available in the design guide.

Ground

Plane

–Out

Figure 11—N+1 module array output connections.

Figure 12—Voltage drop compensation.

PIN STYLES

Designator

Description

Notes

(None)

Short solder

Requires in-board, mounting

Long solder

On-board mounting for 0.065" boards

Short ModuMate

SurfMate or in-board socket mounting – RoHS compliant

Long ModuMate

On-board socket mounting – RoHS compliant

* Pin style designator follows the “B” after the output power and precedes the baseplate designator.

Ex. V375A24C600BN — Long ModuMate Pins

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FasTrak Mini E-Grade Family

Rev. 1.0

Page 6 of 8

Set your site on VICOR at www.vicorpower.com

MECHANICAL DRAWINGS

MODULE OUTLINE

0.50 0.02

12,7 0,5

Converter Pins

No. Function Label

0.800

20,32

0.01

+In

0.525

13,34

Primary

Control

0.235 .015

5,97 0,38

(REF)

0.49

12,4

style 2 & 3

baseplates only

(4X)***

0.12* 0.20**

3,1 5,08

1.27

32,3

0.09

2,3

Parallel

–In

–

0.275

6,99

0.15

X 45˚

0.490 .015

Pin C

3,81

–Out

–

(REF)

CHAMFER

12,45 0,38

0.27

Secondary

Control

(2X)

6,9

0.350 .015

8,89 0,38

(REF)

0.65

16,5

FULL R (6X)

0.13

ALUMINUM

BASEPLATE

2.28

57,9

+Out

2.000

50,80

Pin C

1.30

33,0

(6X)

3,3

0.080

2,03

Use a

DIA. (7X)

0.43

10,9

0.06

4-40 Screw (6x)

Torque to:

5 in-lbs

(3X)

1.45

0.400

10,16

1,5

0.54

(7X)

36,8

(REF.)

Short Pin

13,7

0.21

1.04

26,4

1.45

36,8

Slotted (Style 1)

0.57 N-m

5,2

(REF)

0.62

15,7

(7X)

Long Pin

Threaded (Style 2)

4-40 UNC-2B (6X)

Thru Hole (Style 3)

#30 Drill Thru (6X)

(0.1285)

Style 1 baseplate only

** Style 2 & 3 baseplates

*** Reserved for Vicor accessories. Not for mounting

Center line

ALL MARKINGS

THIS SURFACE

PCB MOUNTING SPECIFICATIONS

0.062 0.010

PCB THICKNESS

ALUMINUM

BASEPLATE

1,57 0,25

PINS STYLES

0.800*

20,32

SOLDER:TIN/LEAD

INBOARD

ONBOARD

SOLDER

MOUNT

HOT SOLDER DIPPED

SOLDER

MOUNT

0.525*

13,34

MODUMATE: GOLD PLATED COPPER

PLATED

THRU HOLE

DIA

0.275*

6,99

SHORT PIN STYLE

0.094 0.003

LONG PIN STYLE

0.094 0.003

2,39 0,08

(7X)

0.170*

4,32

2,39 0,08

0.133

3,38

1.734**

44,04

2.000*

50,80

0.06

(4X)

1,5

0.53

13,5

0.43

10,9

.400*

10,16

1.140**

*DENOTES TOL = 0.003

Unless otherwise specified,

dimensions are in inches

0,08

**PCB WINDOW

28,96

Decimals

Tol.

Angles

0.XX

±0.01

±0.25

±0.005

±0.127

±1°

0.XXX

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FasTrak Mini E-Grade Family

Rev. 1.0

Page 7 of 8

Set your site on VICOR at www.vicorpower.com

Vicor’s comprehensive line of power solutions includes modular, high

density DC-DC converters and accessory components, configurable power

supplies, and custom power systems.

Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is

assumed by Vicor for its use. No license is granted by implication or otherwise under any patent or patent

rights of Vicor. Vicor components are not designed to be used in applications, such as life support systems,

wherein a failure or malfunction could result in injury or death. All sales are subject to Vicor’s Terms and

Conditions of Sale, which are available upon request.

Specifications are subject to change without notice.

Component Solutions

for Your Power System

Vicor Corporation

25 Frontage Road

Andover, MA, USA 01810

Tel: 800-735-6200

978-470-2900

Fax: 978-475-6715

Vicor Express: vicorexp@vicr.com

Technical Support: apps@vicr.com

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FasTrak Mini E-Grade Family

Rev. 1.0

9/05

Set your site on VICOR at www.vicorpower.com

V48C12E48BN [VICOR]

相关型号：

V48C12E48BN1

V48C12E48BN2

V48C12E48BS

V48C12E48BS1

V48C12E48BS2

V48C12E75B

V48C12E75B2

V48C12E75B3

V48C12E75BF

V48C12E75BF2

V48C12E75BF3

V48C12E75BG