VX-706-0D-C-E-1 [VECTRON]

Voltage Controlled Crystal Oscillator;


型号：	VX-706-0D-C-E-1
厂家：	Vectron International, Inc
描述：	Voltage Controlled Crystal Oscillator
文件：	总5页 (文件大小：594K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

VX-706

Voltage Controlled Crystal Oscillator

VX-706

Features

Applications

•ꢀ Industrial

•ꢀ AT-Cut Crystal

•ꢀ Surface Mount FR4 based package

•ꢀ Single layer

•ꢀ Reﬂow Process Compatible

•ꢀ Low Phase Noise & Jitter

•ꢀ Synthesizers

•ꢀ Test & Measurement

•ꢀ Military

•ꢀ Tight Stabilities

•ꢀ Frequency Range 40 - 300MHz

•ꢀ Standard Frequencies 61,44; 100; 122,88; 153,6; 200; 250; 300MHz

Performance Speciﬁcations

Frequency Stabilities¹

Parameter

Min

-30

Typical

Max

+30

Units

Condition

vs. operating temperature range

(referenced to +25°C)

ppm

-40 to +85°C

Initial tolerance

vs. supply voltage change

vs. load change

vs. aging / 1 Year

vs. aging (15 years)

-15

-3

-2

-8

+15

ppm

@Vc=Vs/2

V_S5ꢀ

Load 10ꢀ

Page 1 of 5

Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

Performance Speciﬁcations

Supply Voltage (Vs)

Parameter

Supply voltage (standard)

Current consumption

Supply voltage

Min

Typical

3.3

Max

3.465

Units

VDC

Condition

3.135

@ HCMOS

@ PECL

100

4.75

5.25

VDC

Current consumption

@ HCMOS

@ PECL

RF Output

Signal

HCMOS

Load

ꢀ

Rise and Fall time

Duty cycle

Signal

@ 15 pF 10 to 90ꢀ

@ Vs / 2

PECL

Load

Ω

ꢀ

Rise and Fall time

Duty cycle

20 to 80ꢀ

Frequency Tuning (EFC)

60.0

100

200.0

Tuning Range ng

Linearity

ppm

10 ꢀ

Tuning Slope

Positive

0.5

1.65

2.5

3.3

4.5

VDC

with Vs = 3.3V

with Vs = 5V

Control Voltage Range

Frequency Control Input

Impedance

100

kΩ

Additional Parameters

Phase Noise

-72

dBc/Hz

ps RMS

10 Hz

100 Hz

1 kHz

10 kHz

100 kHz

-105

-132

-154

-164

-166

0.042

@122.88

MHz

LVCMOS

3.3V

1 MHz

@ 12kHz .. 20MHz

Jitter

Phase Noise

-74

-104

-133

-154

-160

-162

0.064

dBc/Hz

ps RMS

10 Hz

100 Hz

1 kHz

10 kHz

100 kHz

@ 122.88

MHz

PECL

3.3V

1 MHz

@ 12kHz .. 20MHz

Jitter

Weight

1.0 g

Handling & Processing Note

Processing & Packing

Absolute Maximum Ratings

Supply voltage (Vs)

6.0

+85

+95

Operable Temperature Range

Storage Temperature Range

-40

°C

Page 2 of 5

Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

StaCnrdoasrsdRSehfeiprepnincegLMisetthod

Lage im Gurt

Position in tape

Pin 1

Abwickelrichtun

Unwinding direc

Gurtunterseite

Tape buttom side

Gurtoberseite

*bei W ≤ 24 mm nur untere Lochreihe

∗by W ≤ 24 mm only lower hole line

Tape upper side

Enclosure Type

G322

Tape Width W (mm)

Quantity per meter

150

Quantity per reel

750

Dimension P

Enclosure

Package Codes

Type

G322

Height “H”

1.6

Pin Length “L”

Marking

VX-706-xxxx

Frequency

 AYYWW

Pin Connections

Enable true table (optional)

Control Voltage (Vc)

HCMOS

LVPECL

N.C. / Enable (Option)

Ground

Pin 2

High

Open

Low

Pin 4

Data

Pin 5

N.C.

Pin 4

No Data

Data

Pin 5

No Data

RF Output

Data

Compl. Data

RF Output complementary (PECL)

N.C. (CMOS)

High Tristate

Data

Supply Voltage Input (Vs)

Page 3 of 5

Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

Typical Performance

Phase Noise

VX-706 @ 122.88 MHz LVCMOS

VX-706 @ 122.88 MHz LVPECL

Recommended Reﬂow Proﬁle

Proﬁle Feature

Pb-Free Assembly/

Sn-Pb Assembly

Proﬁle Feature

Pb-Free Assembly/

Sn-Pb Assembly

Average ramp-up rate (T_Lto T_P)

3°C/second max.

Time 25°C to Peak Temperature

8 minutes max.

Preheat -Temperature Min T_Smin

-Temperature Min T_Smax

150°C

200°C

60-180 seconds

Time maintained above

-Temperature (T_L)

-Time (t_L)

217°C

60-150 seconds

-Time (min to max) t_S

TSmax to TL -Ramp-up Rate

3°C/second max

Time maintained above

-Temperature (T_L)

-Time (t_L)

217°C

60-150 seconds

Time within 5°C of actual Peak

Temperature (t_P)

20-40 seconds

Peak Temperature (T_P)

max 260°C

Ramp-down Rate

6°C/ second max

Note: All temperatures refer to topside of the package, measured on the package body surface.

SMD oscillators must be on the top side of the PCB during the reﬂow process.

Page 4 of 5

Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

Ordering Information

VX-706 0 - E A E - 305 0 - 100M000000

Frequency

Model Code

Enable

0: No Enable (only available @ HCMOS)

1: Enable

Height

0: 1.6mm (G322)

Stability Code

305: 30ppm

Supply Voltage

D: 5V

E: 3.3V

Temperature Range

E: -40°C to +85°C

RF Output Code

A: HCMOS

C: PECL

Notes:

1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all

frequencies.

2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency

control voltage, load, temperature (25°C).

3. Phase noise degrades with increasing output frequency.

4. Subject to technical modiﬁcation.

5. Contact factory for availability.

For Additional Information, Please Contact

USA:

Europe:

Asia:

Microsemi

68 Yin Cheng Road(C), 22nd Floor

One LuJiaZui

Pudong, Shanghai 200120, China

Tel: +86 21 6194 6886

Fax: +86 21 6194 6699

Microsemi

Vectron International GmbH

Landstrasse, D-74924

267 Lowell Road, Unit 102

Hudson, NH 03051

Tel: 1.888.328.7661

Neckarbischofsheim, Germany

Tel: +49 (0) 7268-801-0

Fax: 1.888.329.8328

Fax: +49 (0) 7268-801-281

Disclaimer

Microsemi reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights

under any patent accompany the sale of any such product(s) or information.

Rev: 01/2018

Page 5 of 5

Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com

相关型号：