VS700_09 [VECTRON]
Voltage Controlled SAW Oscillator; 压控振荡器锯型号: | VS700_09 |
厂家: | Vectron International, Inc |
描述: | Voltage Controlled SAW Oscillator |
文件: | 总7页 (文件大小:825K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS-700
Voltage Controlled SAW Oscillator
VS-700
Description
The VS-700 is a SAW based voltage controlled oscillator that operates at the fundamental frequency of the internal SAW filter.
The SAW filter is a high-Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating
temperature range. The oscillator is housed in a hermetically sealed leadless surface mount package offered on tape and reel. It
has an output disable to facilitate on-board testing.
Features
Industry Standard Package, 5.0 x 7.5 x 2.5 mm
Output Frequencies from 500 MHz to 850 MHz
3.3 V Operation
Applications
PLL circuits for clock smoothing and frequency translation
•
•
•
•
•
•
•
•
Description
1-2-4 Gigabit Fibre Channel
10 Gigabit Fibre Channel
10GbE LAN / WAN
OC-192
Standard
•
•
•
•
•
•
INCITS 352-2002
INCITS 364-2003
IEEE 802.3ae
Low Jitter < 0.25 ps-rms across 50 kHz to 80 MHz
LV-PECL Configuration with Fast Transition Times
Complementary Outputs
ITU-T G.709
SONET / SDH
GR-253-CORE Issue4
IEEE 802.16
Output Disable Feature
WiMax
Product is free of lead and compliant to EC RoHS Directive
Block Diagram
Vcc
COutput
Output
SAW
Vc
OD
Gnd
Page1 of 7
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 08Dec2009
Performance Specifications
Electrical Performance
Parameter
Symbol
Min
Supply
Typical
Maximum
Units
Notes
2.97
3.3
55
3.63
70
V
2,3
3
Voltage
VCC
ICC
Current (No Load)
mA
Frequency
Nominal Frequency
500 - 850
MHz
1,2,3
fN
Absolute Pull Range
Linearity
APR
Lin
50
ppm
%
1,2,3,8
2,4,8
2,8
5
+390
100
Gain Transfer (See pg 5)
Temperature Stability
ppm/V
ppm
KV
1,6
fSTAB
Outputs
Mid Level
V
mV-pp
mA
2,3
2,3
6
VCC-1.5
500
VCC-1.3
650
VCC-1.1
800
20
Swing
Current
IOUT
tR
Rise Time
250
250
50
400
400
55
ps
5,6
5,6
2,3
6
Fall Time
tF
ps
Symmetry
Spurious Suppression
Jitter (See pg 5)
SYM
45
50
%
60
dBc
ps-rms
фJ
0.120
0.250
6,7
Control Voltage
Input Impedance
100
6
6
ZC
BW
TOP
kΩ
kHz
°C
Modulation Bandwidth
Operating Temperature
Package Size
500
-40
+85
1,3
5.0 x 7.5 x 2.5
mm
1] See Standard Frequencies and Ordering Information (Pg 7).
2] Parameters are tested with production test circuit below (Fig 1).
3] Parameters are tested at ambient temperature with test limits guardbanded for specified operating temperature.
4] Measured as the maximum deviation from the best straight-line fit, per MIL-0-55310.
5] Measured from 20% to 80% of a full output swing (Fig 2).
6] Not tested in production, guaranteed by design, verified at qualification.
7] Integrated across 50 kHz to 80 MHz, per GR-253-CORE Issue4.
8] Tested with Vc = 0.3V to 3.0V.
Fig 1: Test Circuit
Fig 2: 10K LV-PECL Waveform
SYM = 100 x tA / tR
tR
tF
tA
tR
Page2 of 7
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 08Dec2009
Absolute Maximum Ratings
Parameter
Power Supply
Symbol
VCC
Ratings
0 to 6
Unit
V
Input Current
IIN
100
mA
mA
V
Output Current
IOUT
25
Voltage Control Range
Storage Temperature
Soldering Temperature / Duration
VC
0 to VCC
-55 to 125
260 / 40
TSTR
°C
TPEAK / tP
°C / sec
Stresses in excess of the absolute maximum ratings can permanently damage the device. Also, exposure to these absolute
maximum ratings for extended periods may adversely affect device reliability. Functional operation is not implied at these or any
other conditions in excess of those represented in the operational sections of this datasheet. Permanent damage is also possible if
any device input (Vc or OD) draws >100 mA.
Suggested Output Load Configuration
LV-PECL to LV-PECL: For short transmission lengths, the power
consumption could be reduced by removing the 100Ω resistor and
doubling the value of the pull down resistors.
LV-PECL to LVDS: Restricted for short transmission lengths.
Configuration may require modification depending on LVDS receiver.
Functional Test: Allows standard power supply configuration.
Since AC coupled, the LV-PECL levels cannot be measured.
Production Test: Allows direct DC coupling into 50Ω measurement
equipment. Must bias the power supplys as shown. Similiar to figure 1.
Page3 of 7
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 08Dec2009
Typical Characteristics
Page4 of 7
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 08Dec2009
Reliability
VI qualification includes aging at various extreme temperatures, shock and vibration, temperature cycling, and IR reflow
simulation. The VS-700 family is capable of meeting the following qualification tests:
Environmental Compliance
Parameter
Mechanical Shock
Mechanical Vibration
Solderability
Conditions
MIL-STD-883, Method 2002
MIL-STD-883, Method 2007
MIL-STD-883, Method 2003
MIL-STD-883, Method 1014
MIL-STD-883, Method 2016
Gross and Fine Leak
Resistance to Solvents
Handling Precautions
Although ESD protection circuitry has been designed into the VS-700 proper precautions should be taken when handling and
mounting. VI employs a human body model (HBM) and a charged-device model (CDM) for ESD susceptibility testing and design
protection evaluation.
ESD Ratings
Model
Human Body Model
Minimum
1500V
Conditions
MIL-STD-883, Method 3015
Charged Device Model
1000V
JEDEC, JESD22-C101
Reflow Profile (IPC/JEDEC J-STD-020C)
Parameter
PreHeat Time
Symbol
Value
60 sec Min, 180 sec Max
tS
RUP
tL
Ramp Up
3 °C/sec Max
Time Above 217 °C
Time To Peak Temperature
Time at 260 °C
60 sec Min, 150 sec Max
480 sec Max
TAMB-P
tP
20 sec Min, 40 sec Max
6 °C/sec Max
Ramp Down
RDN
The device has been qualified to meet the JEDEC standard
for Pb-Free assembly. The temperatures and time intervals
listed are based on the Pb-Free small body requirements.
The temperatures refer to the topside of the package,
measured on the package body surface. The VS-700 device is
hermetically sealed so an aqueous wash is not an issue.
Page5 of 7
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 08Dec2009
Outline Drawing
Suggested Pad Layout
Dimensions in inches (mm)
Pin Out
Marking Key
Pin
1
Symbol
VC
Function
Control Voltage
Position 6
Position 7
G = GNN
L = LFF
2
OD
Output Disable
Disabled = LV-CMOS Logic 0 (or Gnd)
Enabled = LV-CMOS Logic 1 (or Open)
H = HNN
3
4
5
6
GND
Output
COutput
VCC
Case and Electrical Ground
VCSO Output
Complementary Output
Power Supply Voltage (3.3V 10%)
Tape & Reel (EIA-481-2-A)
Tape Dimensions (mm)
Do
Typ
Reel Dimensions (mm)
Dimension
Tolerance
VS-700
W
F
Po
Typ
4
P1
Typ
8
A
B
C
Typ
13
D
N
Min
50
W1
Typ
16.4
W2
Max
22.4
# Per
Reel
Typ
Typ
Typ
178
Min
1.5
Min
20.2
16
7.5
1.5
200
Page6 of 7
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 08Dec2009
Standard Frequencies (MHz)
500.000000
627.329600
657.421900
674.278800
718.750000
781.250000
531.250000
629.987800
660.184200
690.569200
719.734400
796.875000
552.960000
637.500000
666.514300
693.483000
737.280000
800.000000
569.196400
639.120000
669.326582
693.750000
748.070900
805.664100
595.056000
640.000000
669.642900
704.380600
750.000000
809.063500
622.080000
644.531300
670.838600
707.352700
777.600000
838.860800
624.693800
647.239400
672.162700
709.375000
779.568600
625.000000
648.806400
673.456600
716.573200
780.881000
Other Frequencies Available Upon Request.
Ordering Information
VS - 700 - L F F - G N N - xxxMxxxxxx
Product Family
VS: VCSO
Frequency (See Above)
500M000000 - 850M000000
Package
700: 5 x 7.5 x 2.5 mm
Input
L: 3.3 V
Other (Future Use)
N: N/A
Output
F: LV-PECL
Other (Future Use)
N: N/A
Operating Temperature
F: -40 to 85 °C
Absolute Pull Range
G: 50 ppm
H: 100 ppm
Example: VS-700-LFF-GNN-622M080000
For Additional Information, Please Contact
USA:
Europe:
Asia:
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Vectron International
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Fax: 1.888.329.8328
Fax: +49 (0) 3328.4784.30
Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Page7 of 7
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 08Dec2009
相关型号:
VS70VLNVWM
VS70VLNVWM是一款用于浪涌保护、电压控制和电压限制的TVS二极管。该产品用更小型的PMDE封装实现了与ROHM以往产品同等的电气特性。PMDE是可靠性高、散热性能优异的封装形式。
ROHM
VS70VLNVWMTF
VS70VLNVWMTF是一款用于浪涌保护、电压控制和电压限制的TVS二极管。是符合AEC-Q101标准的高可靠性车规级产品。该产品用更小型的PMDE封装实现了与ROHM以往产品同等的电气特性。PMDE是可靠性高、散热性能优异的封装形式。
ROHM
©2020 ICPDF网 联系我们和版权申明