VS-506 [VECTRON]
Voltage Controlled SAW Oscillator;型号: | VS-506 |
厂家: | Vectron International, Inc |
描述: | Voltage Controlled SAW Oscillator |
文件: | 总6页 (文件大小:774K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS-506
Voltage Controlled SAW Oscillator
Low G-Sensitivity
VS-506
Description
The VS-506 VCSO (Voltage Controlled Saw Oscillator) from Vectron is a high frequency, ultra low phase noise and low g-sensitivity
oscillator designed to support harsh environmental applications. The VS-506 provides 12fs rms jitter in a 12kHz to 20MHz
integration bandwidth, is available from 0.8 to 3.0GHz and is offered in a hermetic sealed package.
Features
Applications
•
•
•
•
•
•
•
•
Frequency Range 0.8 to 3.0 GHz
Ultra low jitter performance
Typical Jitter: 12fsec rms, 12kHz to 20MHz
G-Sensitivity <1.2ppb/g
Shock > 10.000g
•
•
•
Harsh Environment
Military
Test & Measurement
Supply 3.3 & 5V
Output: Sinewave
9x14 mm hermetic package
Performance Specifications
Pulling Characteristics
Parameter
Min
20
Typ
Max
Units
ppm
Notes
Absolute Pull Range (APR)
Includes df vs:
•Operating temperature range +10 .. 85°C
•Aging 10 years
•Supply Voltage Change 5%
•Load change 10%
Tuning Slope
Positive
Control Voltage Range
0.5
0
2.5
4.5
3.3
V DC
VDC
kΩ
with VS = 5V
with VS = 3.3V
1.65
Frequency control input
impedance
20
Modulation bandwidth
100
kHz
@ -3dB
Supply Voltage (Vs)
Supply voltage (standard)
Current consumption
4.75
5.00
5.25
65
V DC
mA
Supply voltage (standard)
Current consumption
3.135
3.3
3.465
100
V DC
mA
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
1 of 6
Performance Specifications (Continued)
RF Output
Parameter
Min
Typ
Max
Units
Notes
Signal
Load
Sinewave
45
0
50
3
55
6
Ω
Output Power
dBm
Phase Noise: 100Hz offset
Phase Noise: 1kHz offset
Phase Noise: 10kHz offset
Phase Noise: 100kHz offset
Phase Noise: 1MHz offset
Phase Noise: 10MHz offset
Jitter: 12kHz to 20MHz offset
-62
-92
-121
-141
-150
-153
11
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
fs rms
@ 2.56GHz
Sinewave
3.3V
Additional Parameters
Parameter
Weight
Min
Max
Units
Notes
10.0g
-20
Subharmonics
G-Sensitivity
Shock
dBc
1.2
ppb/g
10000
g
MIL-STD-883; method 2002.4; Condition E;
Duration 0.2 ms; 10000g
Processing and Packing
Handling and Processing Note
Absolute Maximum Ratings
Parameter
Min
Max
6.0
Units
V
Notes
Supply Voltage (VS)
Operable Temperature Range
Storage Temperature Range
-40
-55
+85
+105
ꢀC
ꢀC
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
2 of 6
Typical Performance
Phase Noise
VS-506 @ 2.56GHz Sinewave
G-Sensitivity
VS-506 @ 2.56GHz Sinewave
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
3 of 6
Outline Drawing / Enclosure
Dimensions in mm
Package Codes
Height “H”
9.5
Code
Pin Length “L”
6.3
G279
Pin Assignment Sinewave
1
2
3
4
Control Voltage (VC)
GND
RF Out
Supply Voltage Input (VS)
Marking
VS-506-xxxx
Frequency
•AYYWW
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
4 of 6
Standard Shipping Method
Enclosure Type
G279
Tray Info
17(X) * 7(Y) array / 119 units per tray
Recommended Wave Soldering Profile
Note: All temperatures refer to topside of the package, measured on the package body surface.
SMD oscillators must be on the top side of the PCB during the reflow process.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
5 of 6
Ordering Information
VS - 506 0 - E E X - 205 X - 2560M0
Frequency
Product Family
VS: VCSO
Enable
X: No Enable
Package
9x14mm THT
Height
0: 9.5mm (G279)
APR Code
205: ±20ppm
Supply Voltage
D: +5.0V
E: +3.3V
Temperature Range
X: +10°C to +85°C
E: -40°C to +85°C
RF Output Code
E: Sinewave
Standard Frequencies (MHz)
632.8125
784.489605
1000
832
867.1875
1034.337568
1687.5
873.5154185
949.976022
1067.686799
1707.08
980.604559
993.4096915
1265.625
1024.23965
1568.97921
1748.366885
1968.75
1040
1200
1280
1701.32
1875
1734.375
1747.030837
1899.952044
2104.658326
2949.12
1747.62305
1961.209118
2135.373597
1769.145
1986.819383
2400
1879.437686
2048.4793
2560
1884.052863
2068.675135
2812.5
2000
2187.5
2457.6
Other Frequencies Available Upon Request
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modification.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Europe:
Asia:
Microsemi
Vectron International GmbH
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 7268-801-0
Microsemi
267 Lowell Road, Unit 102
Hudson, NH 03051
Tel: 1.888.328.7661
68 Yin Cheng Road(C), 22nd Floor
One LuJiaZui
Pudong, Shanghai 200120, China
Tel: +86 21 6194 6886
Fax: 1.888.329.8328
Fax: +49 (0) 7268-801-281
Fax: +86 21 6194 6699
Disclaimer
Microsemi reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights
under any patent accompany the sale of any such product(s) or information.
Rev: 01/2018
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
6 of 6
相关型号:
©2020 ICPDF网 联系我们和版权申明