VC-800-LAC-GTJ-25.920 [VECTRON]
Voltage Controlled Crystal Oscillator; 压控晶体振荡器型号: | VC-800-LAC-GTJ-25.920 |
厂家: | Vectron International, Inc |
描述: | Voltage Controlled Crystal Oscillator |
文件: | 总6页 (文件大小:566K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Product Data Sheet
VC-800
Voltage Controlled Crystal Oscillator
Features
• Worlds Smallest VCXO, 5.0 x 3.2 x 1.5 mm
• High Frequencies to 51.84 MHz
• 5 or 3.3 V operation
• Linearity ≤10%
• Tri-State Output
• Low jitter < 6ps rms
• VCXO with CMOS outputs
• 0/70 or –40/85°C temperature range
• Hermetically sealed ceramic SMD package
Applications
• SONET/SDH
• DWDM
• xDSL/PCMCIA cards
• Digital Video
Description
Vectron’s VC-800 Voltage Controlled Crystal Oscillator
(VCXO) is a quartz stabilized square wave generator
with a CMOS output and is tested at CMOS and TTL
(5 volt operation) logic levels.
The VC-800 is the smallest available VCXO making it
ideally suitable for PCMCIA applications as well as any
other where size is limited but performance is required.
VC-800 Voltage Controlled Crystal Oscillator
Performance Characteristics
Electrical Performance
Parameter
Symbol
Minimum
Typical
Maximum
Units
Frequency
fO
1.544
51.84
MHz
V
Supply Voltage1
(+3.3 V)
(+5.0 V)
VDD
2.97
4.5
3.3
5.0
3.63
5.5
Supply Current
IDD
12
25
mA
V
Output Logic Levels
Output Logic High2
Output Logic Low2
VOH
VOL
0.9*VDD
0.1VDD
Transition Times
Rise Time2
tR
tF
5
5
ns
ns
Fall Time2
Symmetry or Duty Cycle3
Operating temperature (ordering option)
Test Conditions for APR (+5V option)
Test Conditions for APR (+3.3V option)
Absolute Pull Range (ordering option)
SYM
40
50
60
%
°C
V
0/70 or –40/85
VC
VC
0.5
0.3
4.5
3.0
V
APR
+/-50
ppm
+/- 80
Gain Transfer (See Figure 3)
Control Voltage Leakage Current
Control Voltage Bandwidth (-3dB)
Package Size
Positive
IVCXO
BW
1
uA
10
kHz
mm
5.0 x 3.2 x 1.5
1. A 0.01uF and a 0.1uF capacitor should be located as close to the supply as possible (to ground) is recommended.
2. Figure 1 defines these parameters. Figure 2 illustrates the equivalent five gate TTL load and operating conditions under
which these parameters are tested and specified.
3. Symmetry is defined as (ON TIME/PERIOD with Vs = 1.4 V for TTL and Vs=2.5 V for CMOS, 5 volt operation, and
Vs=1.65V for 3.3 Volt operation.
4. Load Capacitor will depend on frequency.
.
Figure 1. Output Waveform
Conditions (25 5°Cꢀ
Figure 2. Typical Output Test
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
2
VC-800 Voltage Controlled Crystal Oscillator
Outline Diagram
Pad Layout
6
5
4
1
2
3
Pin Out
Pin #
Symbol
VC
Function
1
2
3
4
5
6
Control Voltage
Tri-state
GND
Logic low disables output. Logic high or N/C enables output waveform.
Ground
fO
Output Frequency
Logic low for CMOS optimized symmetry. Logic high or N/C for TTL optimized symmetry.
Supply Voltage
CMOS/TTL
VDD
Tape and Reel
J
F
G
D
C
B
A
I
L
E
H
K
Tape and Reel Dimensions (mmꢀ
Tape Dimensions
Reel Dimensions
# Per Reel
Product
A
B
C
D
E
F
G
H
I
J
K
L
VC-800
12
5.5
1.5
4
8
1.78 20.6
13
55
6
12.4 178 500
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
3
VC-800 Voltage Controlled Crystal Oscillator
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is
not implied at these or any other conditions in excess of conditions represented in the operational sections of this
data sheet. Exposure to absolute maximum ratings for extended periods may adversely affect device reliability.
Parameter
Power Supply
Symbol
VDD
Ratings
6
Unit
Vdc
°C
Storage Temperature
Voltage Control Range
Tstorage
VC
-55/125
0 to VDD
V
200.0
150.0
100.0
50.0
0.0
-50.0
-100.0
-150.0
-200.0
0.30
0.60
0.90
1.20
1.50
1.80
2.10
2.40
2.70
3.00
Control Voltage (volts)
Figure 3. Typical Frequency Pull Versus Control Voltage, 35.328MHz Output, 3.3 Volt Supply
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
4
VC-800 Voltage Controlled Crystal Oscillator
Reliability
The VC-800 is capable of meeting the following qualification tests.
Environmental Compliance
Parameter
Conditions
Mechanical Shock
Mechanical Vibration
Solderability
MIL-STD-883 Method 2002
MIL-STD-883 Method 2007
MIL-STD-883 Method 2003
MIL-STD-883 Method 1014
MIL-STD-883 Method 2016
Gross and Fine Leak
Resistance to Solvents
Handling Precautions
Although ESD protection circuitry has been designed into the the VC-800, proper precautions should be
taken when handling and mounting. VI employs a Human Body Model and a Charged-Device Model
(CDM) for ESD susceptibility testing and design protection evaluation. ESD thresholds are dependent on
the circuit parameters used to define the model. Although no industry wide standard has been adopted
for the CDM, a standard HBM of resistance=1.5kohms and capacitance = 100pF is widely used and
therefore can be used for comparison purposes.
ESD Ratings
Model
Minimum
Conditions
Human Body Model
1500
MIL-STD-883 Method 3115
Charged Device Model
1000
JESD 22-C101
Recommended Solder Reflow Profile
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
5
VC-800 Voltage Controlled Crystal Oscillator
Standard Frequencies - MHz
4.096
16.384
32.768
8.192
17.664
35.328
12.960
25.920
44.736
13.500
27.000
51.840
16.000
32.000
Other frequencies may be available upon request
Ordering Information
MHz
XX.XXX
J
VC-800 K A C G T
Frequency
Product Family
VC=VCXO
Symmetry
J: 50 5%
K: 50 10%
Package
800: 5.0 x 3.2 x 1.5 mm
Tri-state
T: Pin #2
Input
K: 5.0V ( 10%)
L: 3.3V ( 10%)
Absolute Pull Range
G: 50 ppm
N: 80 ppm
Output
A: CMOS
Temperature Range
C: 0 to 70°C
F: -40 to 85°C
NOTE: Not all combinations of options are available.
For additional information please contact:
USA: Vectron International • 267 Lowell Road, Hudson, NH 03051 . . . . . . Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
EUROPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 49 (0) 3328 4784 17 Ô Fax: 49 (0) 3328 4784 30
ASIA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: +86 21 28909740 / 41 / 42 Ô Fax: +86 21 28909240 / 2890999ÔÔÔ
www.vectron.com
Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
©2001, Vectron International.
Rev.22Oct01, 16 Aug 02
相关型号:
©2020 ICPDF网 联系我们和版权申明