TFS315 [VECTRON]
Filter Specification; 过滤器规格型号: | TFS315 |
厂家: | Vectron International, Inc |
描述: | Filter Specification |
文件: | 总4页 (文件大小:42K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
tfs315.doc
version 1.2
06.01.02
______________________________________________________________________________________________________
V__I__T_E__L__E_F__IL__T_E__R_______________________F__il_t_e_r___S_p__e_c__if_i_c_a__ti_o__n_______________T__F_S___3__1_5__________1_/_4____
Measurement Condition
Ambient temperature:
Input power level:
23 °C
dBm
0
Terminating impedances
for input:
for output
595 Ω // -0.8 pF single ended
2100 Ω // -0.5 pF balanced driven
Characteristics
Remark: Reference level for the relative attenuation a of the TFS 315 is the minimum of the pass band attenuation a
. The minimum of the
rel
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower
min
pass band attenuation a
min
e
o
frequencies at the 15 dB filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed on 315 MHz without tolerance. The
given values for the relative attenuation a and for the group delay ripple have to be reached at the frequencies given below also if the centre
e
N
rel
frequency f is shifted due to the temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for
o
f
the centre frequency f .
o
D a t a
typ. Value
Variation/ Limitation
_________________________________________________________________________________________________________
Insertion Loss
(Reference level)
a
= a
min
4,6 dB
max.
7
dB
e
_________________________________________________________________________________________________________
Nominal Frequency
fN
-
315
MHz
_________________________________________________________________________________________________________
Centre Frequency 315 Mhz
fo
-
_________________________________________________________________________________________________________
1 dB - Band Width 160 kHz min. 25 kHz
BW
_________________________________________________________________________________________________________
Relative Attenuation
a
rel
fN ±200
fN ± 600
kHz... fN ± 600
kHz
1,6 MHz
3,4 MHz
min. 15
min. 45
min. 55
min. 60
dB
dB
dB
dB
22
50
63
65
dB
dB
dB
dB
kHz... fN
±
±
fN
fN
±
±
1,6 MHz...fN
3,4 MHz...fN ± 225
MHz
________________________________________________________________________________________________________
Group Delay Distortion fN
±
25 kHz
GDD
TBD
max. 7µs
________________________________________________________________________________________________________
Temperature Coefficient of Frequency
TCf
- 0,036 ppm/K2
-
________________________________________________________________________________________________________
Frequency Inversion Temperature + 25 °C
-
________________________________________________________________________________________________________
Operating Temperature Range - 20°C ... + 70°C
________________________________________________________________________________________________________
Storage Temperature Range
- 50°C ... + 80°C
________________________________________________________________________________________________________
Generated:
Checked / approved:
______________________________________________________________________________________________________
VI TELEFILTER
Potsdamer Straße 18
Vectron International, Inc.
267 Lowell Road
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs315.doc
version 1.2
06.01.02
______________________________________________________________________________________________________
V__I__T_E__L__E_F__IL__T_E__R_______________________F__il_t_e_r___S_p__e_c__if_i_c_a__ti_o__n_______________T__F_S___3__1_5__________2_/_4____
Construction and Pin Configuration
(All dimensions in mm)
1
2
3
4
5
6
7
8
Input
Ground
Ground
Ground
Output
Output
Ground
Ground
S 315
M2
50 Ω test circuit1
C1
C2
1
5
Input
Output
50 Ohm
50 Ohm
SAW
L1
L2
6
C3
2,3,4,7,8
50 Ω test circuit 2
L1
L2
1
5
Input
Output
50 Ohm
50 Ohm
SAW
C2
C1
L3
6
2,3,4,7,8
______________________________________________________________________________________________________
VI TELEFILTER
Potsdamer Straße 18
Vectron International, Inc.
267 Lowell Road
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs315.doc
version 1.2
06.01.02
______________________________________________________________________________________________________
V__I__T_E__L__E_F__IL__T_E__R_______________________F__il_t_e_r___S_p__e_c__if_i_c_a__ti_o__n_______________T__F_S___3__1_5__________3_/_4____
Stability Characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Damp heat:
(cycle)
25 °C to 55°C / 95% r.H. / 10 cycles
DIN IEC 68 - 2 – 30 Db
4. Resistance to
solder heat (reflow):
max. 2 times reflow process;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
Real of empty components at start:
Real of empty components at start including leader:
Trailer
3000
min 300 mm
min 500 mm
min 300 mm
Tape (all dimensions in mm)
EMBOSSED CARRIER
TAPE
W
Po
Do
D1
E
:
:
:
:
12
4
± 0,3
± 0,1
P o
2
P
D
o
1,5 + 0,5
1,5 + 0,5
1,75 ± 0,1
7,5 ± 0,1
0,75
E
F
A
o
:
1
D
F
:
±
0,1
13,4
W
B
o
G (min) :
P2
P1
:
2
8
± 0,05
± 0,1
G
:
D1(min) : 1,5
P 1
Ao
Bo
:
:
5,4 ± 0,1
5,4 ± 0,1
COVER TAPE
W
2
Reel (all dimensions in mm):
A
:
330
W1
:
:
16,4 +2
W2 (max) :
22,4
N (min)
C
>= 90
C
A
:
13
± 0,25
N
W
1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape.
The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on
the right side of the tape.
______________________________________________________________________________________________________
VI TELEFILTER
Potsdamer Straße 18
Vectron International, Inc.
267 Lowell Road
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
tfs315.doc
version 1.2
06.01.02
______________________________________________________________________________________________________
V__I__T_E__L__E_F__IL__T_E__R_______________________F__il_t_e_r___S_p__e_c__if_i_c_a__ti_o__n_______________T__F_S___3__1_5__________4_/_4____
Air reflow Temperature Conditions
1st and 2nd air reflow profile
Name: pre-heating periods
main-heating periods
over 200 °C
peak temperature
255 °C ± 5 °C
Temperature: 150 °C - 170 °C
Time:
60 sec. - 90 sec.
20 sec. - 25 sec.
Chip-mount air reflow profile
260
240
220
200
180
160
140
120
100
80
60
40
20
0
0
20
40
60
80
100
120
140
160
180
200
220
240
time / sec.
Table for temperature vs. time during the air reflow process
Tolerance of temperatures: ± 5 °C
time / sec.
0
temperature / °C
time / sec.
140
150
160
170
180
190
195
200
205
210
215
220
230
240
temperature / °C
23
34
46
60
80
103
121
134
143
150
154
156
158
159
160
161
164
170
180
205
230
255
230
205
180
165
140
120
10
20
30
40
50
60
70
80
90
100
110
120
130
______________________________________________________________________________________________________
VI TELEFILTER
Potsdamer Straße 18
Vectron International, Inc.
267 Lowell Road
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
Hudson, NH 03051 / USA
Tel: (603) 598-0070 Fax: (603) 598-0075
E-Mail: vti@vtinh.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号:
©2020 ICPDF网 联系我们和版权申明