OX-4033-EAE-1080-20M00 [VECTRON]
OCXO; OCXO
| 型号： | OX-4033-EAE-1080-20M00 |
| 厂家： | 
Vectron International, Inc |
| 描述： | OCXO |
| 文件： | 总5页 (文件大小：179K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
OX-4033-EAE-1080-20M00
OCXO
Preliminary version: Subject to technical modification.
Nominal frequency (f0)
20 MHz
Frequency stabilities
Parameter
Over all (df/f0)
Frequency stability
-4.6 to 4.6 ppm
-10 to 10 ppb
Operating temp. range
-40 ... 85 °C
vs. operating temp. range (df/f@25 °C)
Additional information
Drift 24 Hr and ±2.8°C temp. change < ±1ppb
over all include: Temp Stab, supply, load stab, inital, 20 years aging
S3E compliant according GR1244
Parameter
Value
-500 to 500 ppb
-10 to 10 ppb
-10 to 10 ppb
<± 1 ppb
Condition
@25 °C
static; 3.3 V ±5 %
initial tolerance (df/f0)
vs. supply voltage change (df/f)
vs. load change (df/f)
vs. aging / daily (df/f)
vs. aging / month (df/f)
vs. aging / year (df/f)
vs. aging / 10 years (df/f)
Holdover 24 h
static; Load ± 5 %
after 30 days ; @ 25 °C
after 30 days ; @ 25 °C
after 30 days ; @ 25 °C
after 30 days ; @ 25 °C
incl. Drift and -40...85°C
temperature stability
<± 25 ppb
<± 100 ppb
<± 1 ppm
± 10 ppb
RF output
Parameter
Signal
Value
LVCMOS
15 pF ±10 %
3
< 10 ns
< 10 ns
45 / 55 %
x < 0.4 V
x > 2.4 V
Condition
Load
Fan out
Rise Time
Fall Time
Duty cycle
V Low
@ 10 to 90 %Vout
@ 90 to 10 %Vout
@ 1.65 V
V High
Supply voltage
Parameter
Value
Condition
Supply voltage (Vs)
Current consumption steady state
Current consumption during warm up
3.3 V ± 5 %
< 330 mA
< 757 mA
@ Vsnom & 25 °C
@ Vs
Additional Parameters
Parameter
Phase Noise
Typ.
-85
-110
-130
-143
-150
0.5 ns
3 ns
Max.
-60
-90
-115
-130
-145
Condition
dBc/Hz@1Hz
dBc/Hz@10Hz
dBc/Hz@100Hz
dBc/Hz@1kHz
dBc/Hz@10kHz
1 sec
MTIE
10 sec
5 ns
100 sec
20 ns
30 ns
1000 sec
10000 sec
Condition
Parameter
Jitter
TDEV
Value
< 1.00 psec (RMS)
0.015 ns
0.12 ns
@ 12 kHz to 20 Hz
1 s
TDEV
10 s
TDEV
0.5 ns
100 s
TDEV
2 ns
1000 s
Warm-up time
< 3 min
@ 25 °C to final frequency
Additional information
TDEV:Typical Wander Generation performance when locked
through a 1mHz system loop bandwidth
Holdover 10ppb peak-peak: incl. of 24 h aging and a 40°C temperature change
Processing & Packing
handling&processing note
• Product Specifications OX-4033-EAE-1080
Vectron International
20-May-10 by Göhrig, Detlef Index : P3
printed 2011-05-10 • page 1 of 5
www.vectron.com
OX-4033-EAE-1080-20M00
OCXO
Preliminary version: Subject to technical modification.
Additional environmental conditions
Tensile strength of leads
DIN IEC 68-2-21 (Ua 1)
Flexibility of leads
DIN IEC 68-2-21 (Ub)
Sealing test A
hermetisch dicht (hermetically sealed)
Solderability
DIN IEC 68-2-20, (Ta)
100% RoHS 6 compliant
Solvent resistance
DIN IEC 68-2-45 (xA)
washable device
Absolute Maximum Ratings
Parameter
Operable temperature range
Storage temperature range
Min
-40
-50
Typ
Max
85
85
Units
°C
°C
Condition
• Product Specifications OX-4033-EAE-1080
Vectron International
20-May-10 by Göhrig, Detlef Index : P3
printed 2011-05-10 • page 2 of 5
www.vectron.com
OX-4033-EAE-1080-20M00
OCXO
Preliminary version: Subject to technical modification.
Enclosure
Type G311
Height 12.2 mm
all units in mm
Pin Connections
Pin 1: N.C.
Pin 7: GND(Case)
Pin 8: RF-Output
Pin 14: Vs (supply voltage)
Marking
OX-4033-EAE-1080
20,000 MHz
* VI AYYWW
* pin-1 marking
• Product Specifications OX-4033-EAE-1080
Vectron International
20-May-10 by Göhrig, Detlef Index : P3
printed 2011-05-10 • page 3 of 5
www.vectron.com
OX-4033-EAE-1080-20M00
OCXO
Preliminary version: Subject to technical modification.
Reflow profile
Profile Feature
Pb-Free Assembly/Sn-Pb Assembly
Average ramp-up rate (TL to Tp)
Preheat -Temperature Min (Tsmin)
-Temperature Min (Tsmax)
-Time (min to max) (ts)
Tsmax to TL - Ramp-up Rate
Time maintainted above - Temperature (TL)
- Time (tL)
3°C/second max.
150°c
200°c
60-180 seconds
3°C/second max.
217°C
60-150 seconds
Peak Temperature (Tp)
max 260°C
Time within 5°C of actual Peak Temperature (tp)
Ramp-down Rate
Time 25°C to Peak Temperature
20-40 seconds
6°C/second max.
8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Additional Information
This SMD oscillator has been designed for pick and place reflow soldering.
SMD oscillators must be on the top side of the PCB during the reflow process.
• Product Specifications OX-4033-EAE-1080
Vectron International
20-May-10 by Göhrig, Detlef Index : P3
printed 2011-05-10 • page 4 of 5
www.vectron.com
OX-4033-EAE-1080-20M00
OCXO
Preliminary version: Subject to technical modification.
Notes:
Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage,
frequency control voltage, load, temperature (25°C) .
Preliminary version: Subject to technical modification.
• Product Specifications OX-4033-EAE-1080
Vectron International
20-May-10 by Göhrig, Detlef Index : P3
printed 2011-05-10 • page 5 of 5
www.vectron.com
相关型号：
©2020 ICPDF网 联系我们和版权申明