FX-101-CAF-A4P2 [VECTRON]
Frequency Translator; 频率转换![FX-101-CAF-A4P2](http://pdffile.icpdf.com/pdf1/p00157/img/icpdf/FX-10_870976_icpdf.jpg)
型号: | FX-101-CAF-A4P2 |
厂家: | ![]() |
描述: | Frequency Translator |
文件: | 总12页 (文件大小:541K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
Product Data Sheet
FX-101
Frequency Translator
Features
• Output frequencies up to 77.760 MHz
• Jitter Generation OC-192 compliant
• Jitter transfer per GR-253-CORE
• Single 5.0 or 3.3 Vdc supply
• Locked to specified Input frequency, e.g. 8 kHz
• 1" X 0.8" X 0.2", Surface Mount (FR4base)
• Optional CMOS or PECL Output
Applications
• SONET / SDH / ATM
• DWDM / FDM
• DSL-PON Interconnects
• FEC (Forward Error Correction)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 •Web: www.vectron.com
FX-101 Frequency Translator
Description
Vectron's FX-101 is a crystal based frequency translator The "Input Frequency tracking capability" is the total
which is used to translate any input frequency such as 8 amount of input frequency deviation in which the FX-101
kHz, 1.544 MHz, 2.048 MHz, 19.440 MHz etc.to any spe- is guaranteed to track or translate. As an example, a typ-
cific frequency less than or equal to 77.76 MHz. The input ical input clock would be 8 kHz ±20 ppm.The FX-101 is
frequency does not have to be a 50/50% duty cycle and guaranteed to track at least ±50 ppm of error over tem-
as an example can be an 8 kHz signal with a logic high perature/aging/power supply and is more than twice what
"on time" of only 1us, such as a BITS clock. The FX-101 most applications require. The PLL control voltage is
also has the ability to translate any of 1 to 4 different input brought out through a 470K ohm resistor.This would allow
frequencies to one common output frequency, such as for the use of external circuitry (analog comparators or an
input frequencies of 8 kHz and 1.544 MHz and 19.44 MHz A/D converter plus a processor) to detect when the con-
and any other frequency between 8 kHz and 170 MHz trol voltage is getting close to the limits of the pull range.
translating them to an output frequency up to 77.76 MHz.
Performance Characteristics
Parameter
Symbol
Min
Typical
Max
Unit
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web:www.vectron.com
FX-101 Frequency Translator
Outline Drawing
Pin Out
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
FX-101 Frequency Translator
Pad Layout
Recommended Reflow Profile
NOTE: The FX-100 series should not be subjected to a wash process that will immerse it in solvents. NO CLEAN is the rec-
ommended procedure. The FX-100 series has been designed for pick and place reflow soldering. The suggested reflow pro-
file is shown above. The FX-100 series may be reflowed once, and should not be reflowed in the inverted position.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
FX-101 Frequency Translator
Standard Shipping Method
The Standard ship method for volume production of the
FX-100 series is in a matrix tray. These trays are 100%
recyclable. The trays also offer the added feature that
they can be continuously feed into a pick-n-place
machine eliminating the down time required with tape-
n-reel.
Handling Precautions
Although protection circuitry has been designed into this
device, proper precautions should be taken to avoid
exposure to electrostatic discharge (ESD) during han-
dling and mounting. VI employs a human-body model
(HBM) for ESD-susceptibility testing and protection
design evaluation.
ESD voltage thresholds are dependent on the circuit
parameters used to define the mode. The HBM ESD
threshold presented here was obtained by using para-
meters where resistance = 1500 ohms, capacitance =
100pf)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web:www.vectron.com
FX-101 Frequency Translator
Typical Application
All components outside the dotted line box are user supplied components. This is just one possbile
configuration of the FX-101. For additional information about your specific needs, please contact our factory.
Output Load Configuration
*Note: VI highly recommends either a
linear regulator or bypass capacitors;
10 uF, 0.1 uF and a 100pF capacitor
would be typical.
All components outside the dotted line box are user supplied components
and/or connections. This is just one possible configuration of the FX-101.
For additional information about your specific needs please contact our Factory.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 •Web:www.vectron.com
FX-101 Frequency Translator
FX-100 Series Selection Guide
FITS / MTBF Calculations
Per Bellcore TR-NWT-000332, GF @ +50ºC.
Typical - FX-101-DFC-A1P2
FITs = 291.38
MTBF (Hours) = 3,432, 000
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web:www.vectron.com
FX-101 Frequency Translator
FAQ’s
Q: What are the different input frequencies that are available?
A: The FX-100 series is able to handle any input frequency between 8 kHz and 170 MHz.
(A list of standard frequencies is available on pages 9 and 10.)
Q: How many different input frequencies can a specific FX-101 accept?
A: Each FX-101 can be programmed to accept up to 4 different frequencies.
Q: If there is only one input pin, how can your unit accept 4 different frequencies?
A: The user is required to supply a multiplexer which would switch between the different input
frequencies.The multiplexers’ select pins would need to be sync’d to the select pins of the FX-101.
(See TheTypical Application illustrated on page 6.)
Q: Can a single FX-101 handle an application for 4 input frequencies of 8 kHz, 19.44, 38.88 and 77.76 MHz
all being translated to 77.76 MHz, with the 77.76 MHz input being LvPECL and the others HCMOS?
A: Yes; since the FX-101 AC couples the input signal, this combination can be supported.
Q: What is the lock time for the FX-101?
A: The exact lock time will depend on the specific input frequency. It should be noted that in all cases
the lock time will be significantly less than 1 second.
Q: I asked for a FX-101-DFC-A2S2 with 19.44 and 155.52 MHz for the input frequencies and was given a
Source Control Drawing (SCD) number of FX-101-DFC-S5999 Why was a new number assigned?
A: Whenever there are multiple input frequencies, we need to assign a SCD for the unit so that we can
include a table indicating what the logic levels need to be on pins 12 and 13 to control the unit per
the correct input frequency.
Q: What are the exact jitter transfer specs that the FX-101 series meets?
A: The FX-101 meets the stringent jitter transfer specs in GR-253 for Category II jitter (Section 5.6.2.1.2)
for all OC-n levels.
Q: Does the output frequency need to be 77.76 MHz?
A: No, the output frequency can be any frequency between 1.544 MHz and 77.76 MHz.
(A list of standard frequencies is available on pages 9 and 10.)
Q: What type of noise on the supply line can the FX-101 suppress?
A: The FX-101 is designed to clean up noise on the Input Clock Signal, it is not designed to clean up
noisy power supplies. If excessive noise is present on the supply line it may degrade the output
jitter performance. Additional external filtering may be required. Please consult with your power
supply vendor on the best way to filter noise on your supply line.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web:www.vectron.com
FX-101 Frequency Translator
Evaluation Board
Supply
Voltage
PECL Load Voltage:
Vcc- 2V
VCXO
Monitor
Ground
Edge
Input
Mount
SMA
Frequency
3 Places
Output
Frequency
LED
Lights
Up
When
Locked
For FX-101 with PECL output
Place Connector in the
“0” position for Enable
“1” position Disable
(In disable position as shown)
Evaluation boards are available upon request.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web:www.vectron.com
FX-101 Frequency Translator
Other Standard Input / Output Combinations
The combinations above are just a small sample of
what is possible with the FX-101 series.
The FX-101 uses Vectron International’s V-type VCXO
and as such can support any output frequency that is
available with the V-Type. A list of available output fre-
quencies for the V-Type is provided below.
This series is capable of translating up and down in
frequency. Virtually all input frequencies between 8
kHz and 170 MHz can be supported.
V-type Available Frequencies (MHz)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web:www.vectron.com
FX-101 Frequency Translator
Standard Frequencies
How to Order
FX-101 - -
Output Frequency (H to 2)
See Frequency Chart Above
*If not listed enter S in this block and then list the
Supply Voltage
C = 5 Vdc ±5%
D = 3.3 Vdc ±5%
output frequencies after the part number.
Input Frequency (C to 7)
See Frequency Chart Above
Output Type
A = HCMOS
F = Comp. PECL
*If not listed or more than one frequency enter S in
this block and then list all the input frequencies
after the part number.
Number of Input Frequencies
1 = 1 Input Frequency
2 = 2 Input Frequencies
3 = 3 Input Frequencies
4 = 4 Input Frequencies
Temperature Range
C = 0°C to +70°C
F = -40°C to +85°C
Input Logic
A = HCMOS
*If not listed or more than one input frequency a
special SCD number will be assigned at point of order.
Part Number Examples:
*FX-101-DFC-A1P2
*FX-101-DFC-A4S2, S = 8 kHz, 1.544 MHz, 2.048 MHz, 19.44 MHz
*FX-101-CFC-A1CS, S = 65.536 MHz
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web:www.vectron.com
FX-101 Frequency Translator
Visit Our Website at
www.vectron.com
For additional information please contact:
USA:Vectron International * 267 Lowell Road, Hudson, NH 03051........ Tel:1-88-VECTRON-1 * Fax:1-888-FAX-VECTRON
EUROPE: ....................................................................................................Tel: 49 (0) 3328 4784 17 * Fax: 49 (0) 3328 4784 30
ASIA:.................................................................................Tel: +86 21 28909740 / 41 / 42 Fax: +86 21 28909240 / 28909999
www.vectron.com
I
Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web:www.vectron.com
相关型号:
©2020 ICPDF网 联系我们和版权申明