MCR106L-8-T60-K [UTC]
REVERSE BLOCKING TRIODE THYRISTORS; 反向阻断三极晶闸管
| 型号： | MCR106L-8-T60-K |
| 厂家： | 
Unisonic Technologies |
| 描述： | REVERSE BLOCKING TRIODE THYRISTORS |
| 文件： | 总3页 (文件大小：160K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
MCR106
SCR
REVERSE BLOCKING TRIODE
THYRISTORS
DESCRIPTION
PNPN devices designed for high volume consumer applications
such as temperature, light and speed control; process and remote
control, and
important.
warning systems where reliability of operation is
FEATURES
* Glass-passivated surface for reliability and uniformity
* Power rated at economical prices
* Practical level triggering and holding characteristics
* Flat, rugged, thermopad construction for low thermal resistance,
high heat dissipation and durability
ORDERING INFORMATION
Ordering Number
Pin Assignment
Package
Packing
Lead Free
Halogen Free
1
K
K
2
A
A
3
MCR106L-6-T60-K
MCR106L-8-T60-K
MCR106G-6-T60-K
MCR106G-8-T60-K
TO-126
TO-126
G
G
Bulk
Bulk
Note: Pin assignment: G: Gate K: Cathode A: Anode
www.unisonic.com.tw
1 of 3
Copyright © 2011 Unisonic Technologies Co., Ltd
QW-R301-001.C
MCR106
SCR
ABSOLUTE MAXIMUM RATINGS (TJ=25℃, unless otherwise specified)
PARAMETER SYMBOL
RATINGS
400
UNIT
MCR106-6
MCR106-8
V
V
A
A
Peak Repetitive Forward and Reverse Blocking
Voltage (Note 1) (TJ=110℃, RGK=1kΩ)
V
DRM, VRRM
600
RMS Forward Current (All conduction Angles)
Average Forward Current (TC=93℃or TA=30℃)
IT(RMS)
IT(AV)
4
2.55
Peak Non-repetitive Surge Current
(1/2 Cycle, 60Hz, TJ=-40 ~ +110℃)
ITSM
25
A
Circuit Fusing Considerations (t=8.3 ms)
Peak Gate Power
I2t
2.6
A2S
W
PGM
0.5
Average Gate Power
PG(AV)
IGM
0.1
W
Peak Forward Gate Current
Peak Reversed Gate Voltage
Mounting Torque (Note 2)
Junction Temperature
0.2
A
VRGM
6
6
V
In. lb.
℃
TJ
+110
℃
Storage Temperature
TSTG
-40 ~ +150
Note 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate
voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode.
Blocking voltages shall not be tested with a constant current source such that the voltage of the devices are
exceeded.
2. Torque rating applies with use of compression washer (B52200-F006 or equivalent). Mounting torque in
excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink
contact pad are common. For soldering purposes (either terminal connection or device mounting), soldering
temperatures shall not exceed +200℃. For optimum results, an activated flux (oxide removing) is
recommended.
3. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
PARAMETER
SYMBOL
θJA
RATINGS
UNIT
℃/W
℃/W
Junction to Ambient
Junction to Case
75
3
θJC
ELECTRICAL CHARACTERISTICS (TC=25℃ and RGK=1000 Ω, unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
Peak Forward or Reverse Blocking
TJ=25℃
10
200
2
μA
μA
V
I
DRM,IRRM
TJ=100℃
Current (VAK=Rated VDRM or VRRM
)
Forward “On” Voltage (ITM=4A peak)
Gate Trigger Current (continuous DC)
(Note)
VTM
V
AK=7V, RL=100Ω
200
500
1
IGT
μA
VAK=7V, RL=100Ω, TC=-40℃
VAK=7V, RL=100Ω, TC=25℃
Gate Trigger Voltage (continuous DC)
Gate Non-Trigger Voltage
Holding Current
VGT
VGD
IH
V
V
VAK=Rated VDRM, RL=100Ω, TJ=110℃
0.2
VAK=7V, TC=25 ℃
TJ=110℃
5
mA
V/μs
Forward Voltage Application Rate
dv/dt
10
Note: RGK current is not included in measurement.
UNISONIC TECHNOLOGIES CO., LTD
2 of 3
QW-R301-001.C
www.unisonic.com.tw
MCR106
SCR
TYPICAL CHARACTERISTICS
Maximum Case Temperature
Maximum Case Temperature
110
106
102
110
90
π
π
0
0
α
α
98
f=60Hz
f=60Hz
70
94
90
90°
α=30°
50 α=60°
α=90°
α=180°
30
120°
180°
60°
α=30°
dc
dc
86
80
0 0.40.81.21.62.02.4 2.83.23.6 4.0
Average Forward Current, IT (AV) (A)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Average Forward Current, IT (AV) (A)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
3 of 3
QW-R301-001.C
www.unisonic.com.tw
相关型号：
MCR10ERTF1000
Fixed Resistor, Metal Glaze/thick Film, 0.125W, 100ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
ROHM
MCR10ERTF1103
Fixed Resistor, Metal Glaze/thick Film, 0.125W, 110000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
ROHM
MCR10ERTF1202
Fixed Resistor, Metal Glaze/thick Film, 0.125W, 12000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
ROHM
MCR10ERTF1403
Fixed Resistor, Metal Glaze/thick Film, 0.125W, 140000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
ROHM
©2020 ICPDF网 联系我们和版权申明