BTA06G-6-B-TF3-T [UTC]

TRIAC;
BTA06G-6-B-TF3-T
型号: BTA06G-6-B-TF3-T
厂家: Unisonic Technologies    Unisonic Technologies
描述:

TRIAC

三端双向交流开关
文件: 总4页 (文件大小:163K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
BTA06  
Preliminary  
TRIAC  
6A TRIACS  
DESCRIPTION  
The UTC BTA06 is a 6A triacs, it uses UTC’s advanced  
technology to provide customers with high commutation  
performances and voltage insulated tab, etc.  
The UTC BTA06 is suitable for inductive loads, general purpose  
AC switching and an ON/OFF function in applications such as  
induction motor starting circuits, for phase control operation in light  
dimmers and static relays, etc.  
SYMBOL  
MT2  
G
MT1  
ORDERING INFORMATION  
Ordering Number  
Pin Assignment  
Package  
TO-220F  
Packing  
Tube  
Lead Free  
Halogen Free  
BTA06G-x-xx-TF3-T  
1
2
3
BTA06L-x-xx-TF3-T  
MT1 MT2  
G
SENSITIVITY AND TYPE  
VOLTAGE  
PART NUMBER  
SENSITIVITY  
TYPE  
600V  
800V  
B
50mA  
50mA  
25mA  
35mA  
10mA  
5mA  
STANDARD  
SNUBBERLESS  
STANDARD  
BW  
C
CW  
SW  
TW  
SNUBBERLESS  
LOGIC LEVEL  
LOGIC LEVEL  
: Available  
www.unisonic.com.tw  
1 of 4  
Copyright © 2013 Unisonic Technologies Co., Ltd  
QW-R401-033.c  
BTA06  
Preliminary  
TRIACS  
ABSOLUTE MAXIMUM RATINGS  
PARAMETER  
RMS On-State Current (Full Sine Wave) TC=105°C  
SYMBOL  
IT(RMS)  
RATINGS  
6
UNIT  
A
F=50Hz t=20ms  
60  
A
Non Repetitive Surge Peak On-State  
Current (Full Cycle TJ initial=25°C)  
I2t Value for Fusing  
ITSM  
F=60Hz t=16.7ms  
tP=10ms  
63  
21  
A
A2s  
I2t  
Critical Rate of Rise of On-State Current:  
IG=2xIGT, tr100ns  
F=120Hz TJ=125°C  
dI/dt  
50  
A/µs  
Peak Gate Current  
tP=20µs  
TJ=125°C  
TJ=125°C  
IGM  
PG(AV)  
TJ  
4
A
Average Gate Power Dissipation  
Operating Junction Temperature  
Storage Junction Temperature  
1
W
°C  
°C  
-40~+125  
-40~+150  
TSTG  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
THERMAL RESISTANCES  
PARAMETER  
SYMBOL  
θJA  
RATINGS  
UNIT  
°C/W  
°C/W  
Junction to Ambient  
60  
Junction to Case (AC)  
θJC  
2.7  
ELECTRICAL CHARACTERISTICS (TJ= 25°C, unless otherwise specified)  
FOR SNUBBERLESS AND LOGIC LEVEL (3 QUADRANTS)  
TW  
SW  
CW  
BW  
TEST  
CONDITIONS  
PARAMETER SYMBOL  
Gate Trigger  
UNIT  
mA  
V
MIN TYP MAX MIN TYP MAX MIN TYP MAX MIN TYP MAX  
Current  
IGT  
VGT  
VGD  
I-II-III  
5
10  
35  
50  
VD=12V  
RL=30Ω  
(Note 1)  
Gate Trigger  
Voltage  
I-II-III  
1.3  
1.3  
1.3  
1.3  
Gate  
VD=VDRM,  
RL=3.3k, I-II-III 0.2  
TJ=125°C  
Non-Trigger  
Voltage  
0.2  
0.2  
0.2  
V
Holding  
Current  
IH  
IT=100mA  
10  
15  
35  
50  
mA  
(Note 2)  
I-III  
10  
15  
25  
30  
50  
60  
70  
80  
mA  
mA  
Latching  
Current  
IL  
IG=1.2IGT  
II  
Critical Rate of  
Rise of  
VD=67%VDRM  
,
Off-State  
Voltage  
dV/dt Gate Open,  
TJ=125°C  
20  
40  
400  
1000  
V/µs  
(Note 2)  
(dV/dt)c=0.1V/µs  
TJ=125°C  
Critical Rate of  
Rise of  
Off-State  
Voltage at  
Commutation  
(Note 2)  
2.7  
1.2  
3.5  
2.4  
A/ms  
A/ms  
A/ms  
(dV/dt)c=10V/µs,  
TJ=125°C  
(dI/dt)c  
Without Snubber  
TJ= 125°C  
3.5  
5.3  
Notes: 1. Minimum IGT is guaranteed at 5% of IGT max.  
2. For both polarities of MT2 referenced to MT1.  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 4  
QW-R401-033.c  
www.unisonic.com.tw  
BTA06  
Preliminary  
TRIACS  
ELECTRICAL CHARACTERISTICS(Cont.)  
FOR STANDARD (4 QUADRANTS)  
C
B
PARAMETER  
SYMBOL  
TEST CONDITIONS  
I-II-III  
UNIT  
MIN TYP MAX MIN TYP MAX  
25  
50  
50  
100  
1.3  
mA  
mA  
V
Gate Trigger Current  
(Note 1)  
IGT  
VGT  
VGD  
IH  
VD=12V, RL=30Ω  
IV  
Gate Trigger Voltage  
ALL  
1.3  
VD=VDRM, RL=3.3k,  
TJ=125°C  
Gate Non-Trigger Voltage  
Holding Current (Note 2)  
Latching Current  
ALL  
0.2  
0.2  
V
IT=500mA  
25  
40  
80  
50  
50  
mA  
mA  
mA  
I-III-IV  
II  
IL  
IG=1.2IGT  
100  
Critical Rate of Rise of  
Off-State Voltage (Note 2)  
Critical Rate of Rise of  
Off-State Voltage at  
VD=67%VDRM, Gate Open,  
TJ=125°C  
dV/dt  
200  
5
400  
10  
V/µs  
(dV/dt)c (dI/dt)c=2.7A/ms, TJ= 125°C  
V/µs  
Commutation (Note 2)  
STATIC CHARACTERISTICS  
PARAMETER  
SYMBOL  
VTM  
TEST CONDITIONS  
ITM=8.5A, tP=380μs TJ=25°C  
MIN TYP MAX UNIT  
Peak On-State Voltage (Note 2)  
Threshold Voltage (Note 2)  
Dynamic Resistance (Note 2)  
1.55  
0.85  
60  
V
V
VTO  
TJ=125°C  
TJ=125°C  
TJ=25°C  
RD  
mꢀ  
μA  
mA  
IDRM  
5
Repetitive Peak Off-State Current  
VDRM=VRRM  
IRRM  
TJ=125°C  
1
Notes: 1. Minimum IGT is guaranteed at 5% of IGT max.  
2. For both polarities of MT2 referenced to MT1.  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 4  
QW-R401-033.c  
www.unisonic.com.tw  
BTA06  
Preliminary  
TRIACS  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 4  
QW-R401-033.c  
www.unisonic.com.tw