P1300LB [UNSEMI]

Thyristor Surge Suppressors (TSS);
P1300LB
型号: P1300LB
厂家: UN Semiconducctor INC    UN Semiconducctor INC
描述:

Thyristor Surge Suppressors (TSS)

文件: 总5页 (文件大小:795K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Thyristor Surge Suppressors (TSS)  
P0080LB - P5000LB Series - DO-15  
@10/700μS, 4KV  
Description  
P0080LB - P5000LB Series are designed to protect broadband  
equipment such as modems, line card, CPE and DSL from  
damaging over-voltage transients.  
The series provides a surface mount solution that enables  
equipment to comply with global regulatory standards.  
Features and Benefits  
u
u
u
Low voltage overshoot  
Low on-state voltage  
Does not degrade surge capability after multiple surge events  
within limit  
Schematic Symbol  
u
Fails short circuit when surged in excess of ratings  
Low Capacitance  
u
Applicable Global Standards  
u
TIA-968-A TIA-968-B  
ITU K.20/21 Enhanced level  
ITU K.20/21 Basic Level  
GR 1089 Inter building  
GR 1089 Inter building  
IEC 6100-4-5  
u
u
u
u
u
u
u
u
YD/T 1082  
YD/T 993  
YD/T 950  
Electrical Parameters  
Parameter  
Definition  
+I  
Switching Current - maximum current required to switch to  
on state  
IS  
IDRM  
IH  
Leakage Current - maximum peak off-state current  
measured at VDRM  
IT  
Holding Current - minimum current required to maintain on  
state  
IS  
IH  
On-state Current - maximum rated continuous on-state  
current  
IT  
IDRM  
-V  
+V  
Switching Voltage - maximum voltage prior to switching to  
on stat  
VS  
VT VDRM  
VS  
Peak Off-state Voltage - maximum voltage that can be  
applied while maintaining off state  
VDRM  
VT  
On-state Voltage - maximum voltage measured at rated  
on-state current  
Off-state Capacitance - typical capacitance measured in  
off state  
C0  
-I  
UN Semiconductor Co., Ltd.  
www.unsemi.com.tw  
@ UN Semiconductor Co., Ltd. 2013  
Revision October 18, 2013  
1 / 5  
Specifications are subject to change without notice.  
Please refer to www.unsemi.com.tw for current information.  
Thyristor Surge Suppressors (TSS)  
P0080LB - P5000LB Series - DO-15  
@10/700μS, 4KV  
Electrical Characteristics  
VDRM  
@IDRM=5μA  
VS  
@100V/μS  
VT  
@IT=2.2A  
C0  
@1MHz  
IS  
IT  
IH  
Part  
Number  
Marking  
V min  
V max  
V max  
mA max  
A max  
mA min  
pF min  
pF max  
P0080LB  
P0300LB  
P0640LB  
P0720LB  
P0900LB  
P1100LB  
P1300LB  
P1500LB  
P1800LB  
P2000LB  
P2300LB  
P2600LB  
P3100LB  
P3500LB  
P4000LB  
P4500LB  
P5000LB  
P008LB  
P03LB  
P06LB  
P07LB  
P09LB  
P11LB  
P13LB  
P15LB  
P18LB  
P20LB  
P23LB  
P26LB  
P31LB  
P35LB  
P40LB  
P45LB  
P50LB  
6
25  
40  
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
50  
25  
15  
40  
35  
25  
30  
25  
25  
25  
20  
25  
20  
20  
20  
20  
20  
20  
150  
140  
60  
60  
55  
50  
45  
40  
35  
35  
35  
35  
35  
35  
35  
35  
35  
25  
50  
58  
77  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
65  
88  
75  
98  
90  
130  
160  
180  
220  
220  
260  
300  
350  
400  
460  
540  
600  
120  
140  
170  
180  
190  
220  
275  
320  
360  
400  
440  
Notes:  
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).  
- Devices are bi-directional.  
Surge Ratings  
2/10μS1  
2/10μS2  
A min  
250  
8/20μS1  
1.2/50μS2  
A min  
10/160μS1  
10/160μS2  
A min  
10/560μS1  
10/560μS2  
A min  
10/1000μS1  
10/1000μS2  
A min  
5/310μS1  
ITSM  
50/60 Hz  
di/dt  
10/700μS2  
A min  
100  
Series  
A min  
Amps/µs max  
B
250  
150  
100  
80  
30  
500  
Notes:  
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.  
- IPP ratings applicable over temperature range of -40ºC to +85ºC  
1. Current waveform in µs  
2. Voltage waveform in µs  
- The device must initially be in thermal equilibrium with -40°C < TJ < +150°C  
Thermal Considerations  
Package  
Symbol  
Parameter  
Value  
Unit  
TJ  
Operating Junction Temperature Range  
- 40 to + 150  
- 40 to +150  
90  
°C  
DO-15  
TS  
Storage Temperature Range  
°C  
RθJA  
Thermal Resistance: Junction to Ambient  
°C/W  
UN Semiconductor Co., Ltd.  
www.unsemi.com.tw  
@ UN Semiconductor Co., Ltd. 2013  
Revision October 18, 2013  
2 / 5  
Specifications are subject to change without notice.  
Please refer to www.unsemi.com.tw for current information.  
Thyristor Surge Suppressors (TSS)  
P0080LB - P5000LB Series - DO-15  
@10/700μS, 4KV  
Characteristic Curves  
Figure 1 - V-I Characteristics  
Figure 2 - tr × td Pulse Waveform  
+I  
tr=rise time to peak value  
td=decay time to half value  
IT  
100  
50  
Peak  
Value  
IS  
IH  
Waveform=tr×td  
IDRM  
-V  
+V  
Half Value  
VT VDRM  
VS  
50  
tr  
td  
0
t Time (μs)  
-I  
Figure 4 - Normalized DC Holding Current Versus Case  
Temperature  
Figure 3 - Normalized VS Change Versus Junction  
Temperature  
2.0  
1.8  
1.6  
14  
12  
10  
8
1.4  
6
25  
25℃  
1.2  
1.0  
0.8  
0.6  
0.4  
4
2
9
-4  
-6  
-8  
-40 -20  
0
20 40  
60 80 100 120 140 160  
-40 -20  
0
20  
40 60 80 100 120 140 160  
Case Temperature (TC) - ℃  
Junction Temperature (TJ) - ℃  
UN Semiconductor Co., Ltd.  
www.unsemi.com.tw  
@ UN Semiconductor Co., Ltd. 2013  
Revision October 18, 2013  
3 / 5  
Specifications are subject to change without notice.  
Please refer to www.unsemi.com.tw for current information.  
Thyristor Surge Suppressors (TSS)  
P0080LB - P5000LB Series - DO-15  
@10/700μS, 4KV  
Environmental Specifications  
Physical Specifications  
80% Rated VDRM (VAC Peak ) +125°C or +150°C,  
Lead Material  
Copper Alloy  
High Temp Voltage  
Blocking  
Lead Material Copper Alloy High Temp Voltage  
Blocking 504 or 1008 hrs. MIL-STD-750 (Method  
1040) JEDEC, JESD22-A-101  
Terminal Finish  
100% Matte-Tin Plated  
UL recognized epoxy meeting flammability  
classification 94V-0  
-65°C to +150°C, 15 min. dwell, 10 up to 100 cycles.  
Body Material  
Temp Cycling  
MIL-STD-750  
JESD22-A104  
(Method  
1051)  
EIA/JEDEC,  
Biased Temp &  
Humidity  
52 VDC (+85°C) 85%RH, 504 up to 1008 hrs.  
EIA/  
JEDEC, JESD22-A-101  
+150°C 1008 hrs.  
MIL-STD-750 (Method 1031)  
High Temp Storage  
Low Temp Storage  
JEDEC, JESD22-A-101  
-65°C, 1008 hrs.  
0°C to +100°C,  
5 min. dwell, 10 sec. transfer,  
Thermal Shock  
Thermal Shock 10 cycles.  
MIL-STD-750 (Method  
1056) JEDEC, JESD22-A-106  
Autoclave (Pressure  
Cooker Test)  
+121°C, 100%RH, 2atm, 24 up to 168 hrs.  
EIA/Cooker Test) JEDEC, JESD22-A-102  
Resistance to Solder  
Heat  
+260°C, 30 secs.  
MIL-STD-750 (Method 2031  
Moisture Sensitivity  
Level  
85%RH, +85°C, 168 hrs., 3 reflow cycles Level  
(+260°C Peak). JEDEC-J-STD-020, Level 1  
Soldering Parameters  
Reflow Condition  
Leadfree assembly  
-Temperature Min (Ts(min)  
)
-Temperature Max (Ts(max)  
-Time (min to max) (ts)  
+150°C  
TP  
Critical Zone  
TL to TP  
Ramp-up  
Pre Heat  
)
+200°C  
TL  
60 -180 Seconds  
TS(max)  
Average ramp up rate ( Liquidus Temp TL)  
to peak  
Ramp-down  
3°C/Second Max  
TS(min)  
TS(max) to TL - Ramp-up Rate  
3°C/Second Max  
+217°C  
Preheat  
- Temperature (TL) (Liquidus)  
Reflow  
25  
Time to peak temperature  
Time  
- Time (min to max) (ts)  
60 -150 Seconds  
260 +0/-5°C  
(t 25to peak)  
Peak Temperature (TP)  
Time within 5°C of actual peak Temperature  
(tp)  
30 Seconds Max  
Ramp-down Rate  
6°C/Second Max  
8 minutes Max  
+260°C  
Time 25°C to peak Temperature (TP)  
Do not exceed  
UN Semiconductor Co., Ltd.  
www.unsemi.com.tw  
@ UN Semiconductor Co., Ltd. 2013  
Specifications are subject to change without notice.  
Please refer to www.unsemi.com.tw for current information.  
Revision October 18, 2013  
4 / 5  
Thyristor Surge Suppressors (TSS)  
P0080LB - P5000LB Series - DO-15  
@10/700μS, 4KV  
Part Numbering  
Part Marking  
Part Marking Code  
(Refer to Electrical Characteristics Table)  
Date code  
Dimensions DO-15  
Inches  
Millimeters  
Dimensions  
Min  
Max  
Min  
Max  
B
D
G
L
0.028  
0.120  
0.235  
1.000  
0.034  
0.140  
0.270  
0.711  
3.048  
5.969  
25.40  
0.864  
3.556  
6.858  
Packaging  
Part Number  
Pxxx0LB  
Description  
DO-15 Axial Tape & Reel  
DO-15 Bulk Pack  
Quantity  
Industry Standard  
4000  
500  
EIA-RS-296-D  
N/A  
Tape and Reel Specifications DO-15  
13  
330.2)  
Dimensions  
are in inches  
0.68  
17.27)  
(and millimeters)  
2.55  
64.8)  
2.07  
52.6)  
2.7  
68.6)  
0.20  
5.08)  
0.24  
6.10)  
Direction of Feed  
3.52  
89.40)  
UN Semiconductor Co., Ltd.  
www.unsemi.com.tw  
@ UN Semiconductor Co., Ltd. 2013  
Revision October 18, 2013  
5 / 5  
Specifications are subject to change without notice.  
Please refer to www.unsemi.com.tw for current information.  

相关型号:

P1300LC

Thyristor Surge Suppressors (TSS)
UNSEMI

P1300Q12ALRP

Q2L Series SIDACtor Device
LITTELFUSE

P1300Q12BLRP

Q2L Series SIDACtor Device
LITTELFUSE

P1300Q22CLRP

Q2L Series (C-Rated) SIDACtor㈢ Device
LITTELFUSE

P1300S

SIDACtor Device
TECCOR

P1300SA

SIDACtor Device
TECCOR

P1300SA

DO-214AA Package Symbolization
LITTELFUSE

P1300SA

Silicon Surge Protector, 145 V, 20 A, SILICON SURGE PROTECTOR, DO-214AA, PLASTIC, SMB, 2 PIN
VISHAY

P1300SA-E3

Silicon Surge Protector, 145 V, 20 A, SILICON SURGE PROTECTOR, DO-214AA, PLASTIC, SMB, 2 PIN
VISHAY

P1300SAA

Silicon Surge Protector, 145 V, 20 A, SILICON SURGE PROTECTOR, DO-214AC, PLASTIC, SMA, 2 PIN
VISHAY

P1300SAA-E3

Silicon Surge Protector, 145 V, 20 A, SILICON SURGE PROTECTOR, DO-214AC, PLASTIC, SMA, 2 PIN
VISHAY

P1300SAL

gas plasma arresters-package dimensions/specifications
LITTELFUSE