5KPS [UNSEMI]
Surface Mount Transient Voltage Suppressors; 表面贴装瞬态电压抑制器
| 型号： | 5KPS |
| 厂家： | 
UN Semiconducctor INC |
| 描述： | Surface Mount Transient Voltage Suppressors |
| 文件： | 总4页 (文件大小：939K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Surface Mount Transient Voltage Suppressors
The 5KPS series of high current uni/bi-directional transient
suppressors are designed for A.C. line protection and high power
DC bus clamping applications. These devices offer
uni/bi-directional port protection from 15 volts to 43 volts. They
provide a clamping voltage lower than the avalanche voltage.
Therefore, any voltage rise due to increased current conduction
is contained to a minimum, providing the best possible protection
level. They can also be connected in series and/or parallel to
create very high capacity protection solutions.
JEDEC R-6/P-600 Molded Plastic.
Glass passivated chip junction in R-6/P600 package.
6600 W peak pulse power capability with a 10/1000 us
waveform, repetitive rate (duty cycle):0.01 %
Low leakage
Excellent clamping capability
Very fast response time: typically less than 1.0ps from 0V to
VBR min.
RoHS compliant
Meet with ISO 7637-2,ISO 16750,etc
Use in sensitive electronics protection against voltage transients
induced by inductive load switching and lighting, especially for
automotive load dump protection application
Parameter
Symbol
PPPM
Value
Units
Peak power dissipation with a 10/1000us waveform
6600
W
Power Dissipation on Infinite Heat Sink at TL=75°C
Peak pulse current with a 10/1000us waveform
PD
I PP
8.0
W
A
See Next Table
T J , T STG
Operating junction and storage temperature range
–55 to +150
°C
IFSM
Peak forward surge current, 8.3ms single half sine-wave
500
A
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
1
4
/
Revision February 2, 2015
Please refer to www.unsemi.com.tw for current information.
Surface Mount Transient Voltage Suppressors
Breakdown
Voltage
Maximum
Reverse
Leakage I R
@V RWM
Maximum
Reverse
Surge
Current I PP
(A)
Stand-Off
Voltage
VRMW
Test
Current
IT
Maximum
Clamping
Voltage
Part Number
VBR
(1)
(mA)
V
C @I PP (V)
(V)
Uni
Bi
min(V)
max(V)
(uA)
5KP15AS
5KP16AS
5KP15CAS
5KP16CAS
15.0
16.0
16.70
17.80
18.50
19.70
5.0
5.0
5
5
270.5
253.8
24.4
26.0
5KP18AS
5KP20AS
5KP22AS
5KP24AS
5KP26AS
5KP28AS
5KP30AS
5KP33AS
5KP36AS
5KP40AS
5KP43AS
5KP18CAS
5KP20CAS
5KP22CAS
5KP24CAS
5KP26CAS
5KP28CAS
5KP30CAS
5KP33CAS
5KP36CAS
5KP40CAS
5KP43CAS
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5
5
5
5
5
5
5
5
5
5
5
226.0
203.7
186.0
169.6
156.8
145.4
136.3
123.8
113.6
102.3
95.1
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
40.0
43.0
Note:(1)Surge waveform: 10/1000μs
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
2
4
/
Revision February 2, 2015
Please refer to www.unsemi.com.tw for current information.
Surface Mount Transient Voltage Suppressors
TEST
NUMBER OF
PULSE
SYSTEM
Us(V)
Td（ms） Ri（Ω ）
LEVEL
Ⅳ
12V
24V
87
174
400
350
0.5
4
10 pulse
10 pulse
Ⅳ
Soldering Parameters
Reflow Condition
Lead–free assembly
TP
Critical Zone
TL to TP
-Temperature Min (Ts(min)
)
-Temperature Max (Ts(max)
- Time (min to max) (ts)
150°C
Ramp-up
TL
Pre Heat
)
200°C
TS(max)
60 -180 Seconds
Ramp-down
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/second max
TS(min)
TS(max) to TL - Ramp-up Rate
3°C/second max
217°C
Preheat
- Temperature (TL) (Liquidus)
Reflow
25
Time to peak temperature
- Time (min to max) (ts)
Time
60 -150 Seconds
260 +0/-5°C
(t 25℃ to peak)
Peak Temperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 -40 Seconds
Ramp-down Rate
6°C/second max
8 minutes Max
280°C
Time 25°C to peak Temperature (TP)
Do not exceed
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
3
4
/
Revision February 2, 2015
Please refer to www.unsemi.com.tw for current information.
Surface Mount Transient Voltage Suppressors
Dimensions
Inches
Millimeters
R6/P600
Dimensions
Min
Max
-
Min
Max
-
Cathode Band
A
B
C
D
1.000
0.340
0.048
0.340
25.40
8.64
1.22
8.64
0.360
0.052
0.360
9.14
1.32
9.14
Part Numbering
5 K P S × × × C A
5% VBR VOLTAGE TOLERANCE
BI-DIRECTIONAL
VR VOLTAGE
SUPER
SERIES
Packaging
Component
Package
Packaging
Option
Part Number
Quantity
300
R6/P600
5KPSXXXXX
Box
Packaging Dimensions Unit: Inches (Millimeters)
2.56
(65.00)
0.25
(6.35)
0.40±0.020
(10.16±0.508)
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.
4
4
/
Revision February 2, 2015
相关型号：
5KP_SERIES_14
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 5000 Watts
PANJIT
5KQ30B
Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 30V V(RRM), Silicon, SIMILAR TO TO-220AB, 3 PIN
NIEC
5KQ40B
Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 40V V(RRM), Silicon, SIMILAR TO TO-220AB, 3 PIN
NIEC
5KQ50B
Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 50V V(RRM), Silicon, SIMILAR TO TO-220AB, 3 PIN
NIEC
©2020 ICPDF网 联系我们和版权申明