OHB3040 [TTELEC]

Hallogic Hall-Effect Sensor Assembly;
OHB3040
型号: OHB3040
厂家: TT Electronics    TT Electronics
描述:

Hallogic Hall-Effect Sensor Assembly

文件: 总3页 (文件大小:550K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Hallogic Hall-Effect Sensor  
Assembly  
OHB3040, OHB3040B, OHB3040S  
Features:  
Non-contact moꢁon sensing  
Operates over a broad range of supply voltages (4.5 V to 25 V)  
Excellent temperature stability  
Hall element, linear amplifier and Schmiꢀ trigger on a single Hallogic  
silicon chip  
Suitable for military and space applicaꢁons.  
Performs in dirty environments over wide temperature range  
0.125” (3.18 mm) wide gap  
Descripꢀon:  
The OHB3040 consists of a ceramic Hall-effect sensor (OMH3040) and a rare earth magnet mounted in a low-cost plasꢁc  
housing. The magnet produces opꢁmum magneꢁc flux at the Hall-effect sensor locaꢁon. The sensor has an open collector  
transistor output, which is acꢁvated when the slot is open. When the slot is blocked by a ferrous material that reduces the  
magneꢁc flux density at the Hall-effect sensor locaꢁon, the open collector output transistor switches off. The device  
provides up to 25 mA of sink current. Output characterisꢁcs are constant at switching frequencies from DC to over 200 kHz.  
The OHB3040B has Hi-Reliability processing level B while the OHB3040S has Hi-Reliability processing level S.  
The Uni-Polar turns on with a (logic level “0”) aꢂer a sufficient magneꢁc field from the south pole of a magnet approaches  
the symbolized face of the device (Operaꢁng Point) and turns off (logic level “1”) aꢂer the magneꢁc field reached a  
minimum value. This feature makes these sensors ideal for applicaꢁons in non-contact switching operaꢁons.  
Applicaꢀons:  
Ordering Information  
Non-contact sloꢀed magneꢁc switch  
Harsh environment encoder  
Assembly line automaꢁon  
Machine automaꢁon  
Machine safety  
Part Number  
OHB3040  
Description  
Slotted Switch  
OHB3040B  
OHB3040S  
End of travel sensor  
Door sensor  
1 Vcc  
Voltage  
Regulator  
Output  
Hall  
3
Element  
[MILLIMETERS]  
INCHES  
DIMENSIONS ARE IN:  
2 Ground  
Pin #  
Description  
1
2
3
Vcc  
Ground  
Output  
RoHS  
General Note  
TT Electronics | Optek Technology, Inc.  
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200  
TT Electronics reserves the right to make changes in product specificaꢁon without  
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is  
considered accurate at ꢁme of going to print.  
www.ꢀelectronics.com | sensors@ꢀelectronics.com  
Issue A 11/2016 Page 1  
© TT electronics plc  
Hallogic Hall-Effect Sensor  
Assembly  
Electrical Specificaꢀons  
Absolute Maximum Raꢀngs (TA = 25° C unless otherwise noted)  
Supply Voltage, VCC  
25 V  
-50°C to +160° C  
-40°C to +125° C  
260° C  
Storage Temperature Range, TS  
Operaꢁng Temperature Range, TA  
Lead Soldering Temperature (1/8 in. (3.2 mm) from case for 5 sec. with soldering iron)  
Output ON Current, ISINK  
25 mA  
Output OFF Voltage, VOUT  
25 V  
Magneꢁc Flux Density, B  
Unlimited  
Electrical Characterisꢀcs (TA = 25° C unless otherwise noted)  
SYMBOL  
PARAMETER  
MIN  
TYP  
4
MAX  
7
UNITS  
mA  
mV  
µA  
TEST CONDITIONS  
VCC = 24 V, Output Off  
ICC  
VOL  
IOH  
tr  
Supply Current  
-
-
-
-
-
Output Saturaꢁon Voltage  
Output Leakage Current  
Output Rise Time  
100  
0.1  
0.21  
0.1  
400  
10  
1
VCC = 4.5 V, IOL = 20 mA, Slot Open  
V = 4.5 V, VOUT = 24 V, Slot Blocked(1)  
RL = 820 Ω, CL = 20 pF  
µs  
tf  
Output Fall Time  
1
µs  
RL = 820 Ω, CL = 20 pF  
Notes:  
(1) Slot blocked with a ferrous material to interrupt magneꢁc flux.  
(2) See Hall-effect data sheet OH090 through OHS3100 Series for addiꢁonal informaꢁon — for reference only.  
BOP  
BRP  
Right  
Operate  
Point  
Right  
Release  
Point  
Left  
Release  
Point  
Left  
Operate  
Point  
Magnetic Field  
Minimum  
Maximum  
0.073"  
[1,85mm]  
0.045"  
[1,14mm]  
-0.045"  
[-1,14mm] [-1,85mm]  
-0.073"  
0.005”  
[0.127mm]  
0.003"  
[0,08mm]  
-0.0
0
5
-0.003"  
[-0,08mm]  
[-0.127mm]  
VOH  
Measurements are referenced to Center Line.  
90%  
10%  
90%  
Tf  
Tr  
ROP  
RRP  
10%  
VOL  
Center Line  
M
S
820 Ohm  
LOP  
LRP  
1
Vcc  
Vane - Material = 1018 Cold Rolled Steel - 0.03" [0.76mm] Thick  
0.50” [12.7mm]  
Output  
3
Location = from Bottom of Slot  
U.U.T.  
20 pf  
Ground  
2
General Note  
TT Electronics | Optek Technology, Inc.  
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200  
TT Electronics reserves the right to make changes in product specificaꢁon without  
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is  
considered accurate at ꢁme of going to print.  
www.ꢀelectronics.com | sensors@ꢀelectronics.com  
Issue A 11/2016 Page 2  
© TT electronics plc  
Hallogic Hall-Effect Sensor  
Assembly  
Performance  
Rise & Fall Time vs Temperature  
Rise & Fall vs Temperature  
Icc vs Temperature  
350  
300  
250  
200  
150  
100  
50  
9
8
7
6
5
4
3
2
1
0
Icc ON  
Icc OFF  
Rise  
Fall  
0
-50  
-25  
0
25  
50  
75  
100  
125  
150  
-50  
-25  
0
25  
50  
75  
100  
125  
150  
Temperature (°C)  
Temperature (°C)  
Saturation Voltage vs Temperature  
0.4  
0.35  
0.3  
Sat Voltage  
0.25  
0.2  
0.15  
0.1  
-50  
-25  
0
25  
50  
75  
100  
125  
150  
Temperature (°C)  
General Note  
TT Electronics | Optek Technology, Inc.  
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200  
TT Electronics reserves the right to make changes in product specificaꢁon without  
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is  
considered accurate at ꢁme of going to print.  
www.ꢀelectronics.com | sensors@ꢀelectronics.com  
Issue A 11/2016 Page 3  
© TT electronics plc  

相关型号:

OHB3040B

Hallogic Hall-Effect Sensor Assembly
TTELEC

OHB3040S

Hallogic Hall-Effect Sensor Assembly
TTELEC

OHB660CB

Red EMITTING DIODES
ETC

OHD1-100B

High reliability for on/off operations
KEMET

OHD1-100M

High reliability for on/off operations
KEMET

OHD1-105B

High reliability for on/off operations
KEMET

OHD1-105M

High reliability for on/off operations
KEMET

OHD1-110B

SENSOR TEMP 110C 6W BREAK
KEMET

OHD1-110M

High reliability for on/off operations
KEMET

OHD1-115B

High reliability for on/off operations
KEMET

OHD1-115M

High reliability for on/off operations
KEMET

OHD1-120B

SENSOR TEMP 120C 6W BREAK
KEMET