885062_15 [TRIQUINT]
2.4 GHz WLAN/BT LTE Co-Existence Filter;
| 型号： | 885062_15 |
| 厂家： | 
TRIQUINT SEMICONDUCTOR |
| 描述： | 2.4 GHz WLAN/BT LTE Co-Existence Filter 局域网 LTE WLAN 无线局域网 |
| 文件： | 总8页 (文件大小：364K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Applications
• WiFi bandpass filter that enables the coexistence
of 3G/4G/LTE/TD-LTE & WiFi signals
• High-power WLAN Access Points and Small Cells
• Band-edge filtering of WiFi signal emissions
• Smart Meters and 2.4GHz ISM Applications
• Set Top Box, Gateways and WiFi Routers
CSP-5CT package: 1.4 x 1.2 x 0.46 mm
Functional Block Diagram
Product Features
• Low Loss in WLAN band with extended upper
corner for inclusion of Bluetooth
Top View
Gnd
• High Rejection in B38/B40 bands
• Industry leading small size: 1.4 x 1.2 x 0.46 mm
• Performance over -40 to +95 ºC
• Ceramic chip-scale Package (CSP)
• Hermetically sealed
Output
Gnd
5
4
3
Input
1
2
Pb
• RoHS compliant, Pb-free
Gnd
General Description
Pin Configuration
The 885062 is a high-performance, high power Bulk
Acoustic Wave (BAW) band-pass filter with
extremely steep skirts, simultaneously exhibiting low
loss in the WiFi band and high band-edge & near-in
rejection.
Pin No.
1
Label
Input
4
Output
Ground
2,3,5
The 885062 enables coexistence of WiFi and LTE
signals within the same device or in close proximity
to one another. Its unique power handling capability
allows for implementation into access points, small
cell base stations, and other high power ISM band
applications.
Ordering Information
Part No.
885062
Description
Packaged part
Evaluation board
885062-EVB
The 885062 uses common module packaging
techniques to achieve the industry standard 1.4 x
1.2 x 0.46 mm footprint. The filter exhibits excellent
power handling capabilities.
Standard T/R size = 15,000 units/reel
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 1 of 8 -
© 2015 TriQuint
885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Absolute Maximum Ratings
MTTF
Input Power (3)
Parameter
Storage Temperature (1)
Operable Temperature (2)
Rating
-55 to +125ꢀ°C
-40 to +95ꢀ°C
+ꢀ70ꢀ°C
+ꢀ85ꢀ°C
+ꢀ95ꢀ°C
+ꢀ28ꢀdBm
>ꢀ14Mꢀhours >ꢀ5Mꢀhours >ꢀ2Mꢀhours
1. Operation of this device outside the parameter ranges given may cause permanent damage.
2. Specifications are not guaranteed over all operable conditions.
3. Input Power with WLAN OFDM signal applied.
Electrical Specifications (1)
Conditions unless otherwise noted: Device Temperature = -30°C to +85°C.
Parameter (2)
Conditions
Min Typ (+25°C) Max Units
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2481.5 MHz (WiFi Ch.1-13)
1.7
1.5
1.5
1.6
1.7
0.8
0.8
0.9
0.4
0.6
1.9
160
37
2.2
2.0
1.9
2.1
2.2
1.5
1.1
1.1
1.0
1.8
2.2
200
-
Insertion Loss (3)
-
dB
Amplitude Variation
Input/Output VSWR
-
dB
-
-
35
-
ns
dB
Impulse Response Length (4) 2401 – 2483 MHz
100 – 2300 MHz
2300 – 2365 MHz (5)
2365 – 2370 MHz (5)
48
53
-
-
dB
dB
54
45
56
25
34
29
20
49
38
45
44
38
36
-
58
61
61
49
49
41
41
55
55
48
46
43
40
60
138
2370 – 2375 MHz (+25 to +85˚C) (5)
-
-
-
-
dB
dB
dB
dB
2370 – 2375 MHz (-30 to +25˚C) (5)
2375 – 2380 MHz (+25 to +85˚C) (5)
2375 – 2380 MHz (-30 to +25˚C) (5)
2500 – 2505 MHz (+25 to +85˚C) (5)
2500 – 2505 MHz (-30 to +25˚C) (5)
2505 – 2570 MHz (+25 to +85˚C) (5)
2505 – 2570 MHz (-30 to +25˚C) (5)
2570 – 2620 MHz (5)
Attenuation
-
-
-
-
-
-
dB
dB
dB
dB
dBc
dBc
2620 – 2690 MHz (5)
4800 – 5000 MHz
7200 – 7500 MHz
CW Tone = 2442 MHz @ 22.5 dBm
CW Tone = 2442 MHz @ 22.5 dBm
2nd Harmonics
3rd Harmonics
Notes:
-
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance
over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over the indicated band at the specified temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with 2 % tolerance will be necessary to achieve the stated specifications.
7. This is the optimum impedance in order to achieve the performance shown.
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 2 of 8 -
© 2015 TriQuint
885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Electrical Specifications (1)
Conditions unless otherwise noted: Device Temperature = -40°C to +95°C.
Parameter (2)
Conditions
Min Typ (+25°C) Max Units
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2481.5 MHz (WiFi Ch.1-13)
1.7
1.5
1.5
1.6
1.7
0.8
0.8
0.9
0.4
0.6
1.9
160
37
53
58
61
61
49
49
41
41
2.2
2.0
2.1
2.2
2.4
1.8
1.1
1.1
1.0
1.8
2.2
200
-
Insertion Loss (3)
-
dB
Amplitude Variation
Input/Output VSWR
-
dB
-
-
-
Impulse Response Length (4) 2401 – 2483 MHz
100 – 2300 MHz
ns
dB
dB
dB
35
48
54
43
56
23
34
29
18
49
35
45
44
38
36
-
2300 – 2365 MHz (5)
-
-
2365 – 2370 MHz (5)
2370 – 2375 MHz (+25 to +95˚C) (5)
-
-
-
-
dB
dB
dB
dB
2370 – 2375 MHz (-40 to +25˚C) (5)
2375 – 2380 MHz (+25 to +95˚C) (5)
2375 – 2380 MHz (-40 to +25˚C) (5)
2500 – 2505 MHz (+25 to +95˚C) (5)
2500 – 2505 MHz (-40 to +25˚C) (5)
2505 – 2570 MHz (+25 to +95˚C) (5)
2505 – 2570 MHz (-40 to +25˚C) (5)
2570 – 2620 MHz (5)
Attenuation
55
55
48
46
43
40
60
138
-
-
-
-
-
-
dB
dB
dB
dB
dBc
dBc
2620 – 2690 MHz (5)
4800 – 5000 MHz
7200 – 7500 MHz
CW Tone = 2442 MHz @ 22.5 dBm
CW Tone = 2442 MHz @ 22.5 dBm
2nd Harmonics
3rd Harmonics
Notes:
-
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance
over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over the indicated band at the specified temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with 2 % tolerance will be necessary to achieve the stated specifications.
7. This is the optimum impedance in order to achieve the performance shown.
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 3 of 8 -
© 2015 TriQuint
885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Electrical Specifications (1)
Conditions unless otherwise noted: Device Temperature = 0°C to +70°C.
Parameter (2)
Conditions
Min Typ (+25°C) Max Units
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2421.5 MHz (WiFi Ch.1)
2407.5 – 2426.5 MHz (WiFi Ch.2)
2412.5 – 2471.5 MHz (WiFi Ch.3-11)
2457.5 – 2476.5 MHz (WiFi Ch.12)
2462.5 – 2481.5 MHz (WiFi Ch.13)
2402.5 – 2481.5 MHz (WiFi Ch.1-13)
1.7
1.5
1.5
1.6
1.7
0.8
0.8
0.9
0.4
0.6
1.9
160
37
53
58
61
61
49
49
41
41
2.2
2.0
1.9
2.1
2.2
1.5
1.1
1.1
1.0
1.6
2.2
200
-
Insertion Loss (3)
-
dB
Amplitude Variation
Input/Output VSWR
-
dB
-
-
-
Impulse Response Length (4) 2401 – 2483 MHz
100 – 2300 MHz
ns
dB
dB
dB
35
48
54
46
56
27
34
29
26
49
40
45
44
38
36
-
2300 – 2365 MHz (5)
-
-
2365 – 2370 MHz (5)
2370 – 2375 MHz (+25 to +70˚C) (5)
-
-
-
-
dB
dB
dB
dB
2370 – 2375 MHz (0 to +25˚C) (5)
2375 – 2380 MHz (+25 to +70˚C) (5)
2375 – 2380 MHz (0 to +25˚C) (5)
2500 – 2505 MHz (+25 to +70˚C) (5)
2500 – 2505 MHz (0 to +25˚C) (5)
2505 – 2570 MHz (+25 to +70˚C) (5)
2505 – 2570 MHz (0 to +25˚C) (5)
2570 – 2620 MHz (5)
Attenuation
55
55
48
46
43
40
60
138
-
-
-
-
-
-
dB
dB
dB
dB
dBc
dBc
2620 – 2690 MHz (5)
4800 – 5000 MHz
7200 – 7500 MHz
CW Tone = 2442 MHz @ 22.5 dBm
CW Tone = 2442 MHz @ 22.5 dBm
2nd Harmonics
3rd Harmonics
Notes:
-
1. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical
compliance over temperature.
2. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances.
3. Data is the integrated value of the linear s-parameter over the indicated band at the specified temperature.
4. Duration in ns between the maxima and the point 40 dB below the maxima.
5. Data is the integrated value of the linear s-parameter over 5 MHz range at the specified temperature.
6. An external impedance matching network with 2 % tolerance will be necessary to achieve the stated specifications.
7. This is the optimum impedance in order to achieve the performance shown.
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 4 of 8 -
© 2015 TriQuint
885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Evaluation Board
Notes:
1. Matching component values shown are for the specified TriQuint evaluation board. Value adjustment may be required in
end user product circuits depending on component manufacturer and PCB material.
2. PCB: .500 x.500 x .062; Construction: ½ oz Cu Top Layer; TLY-5A (.0075) ½ oz Cu Middle Layer, FR4; ½ oz Cu Bottom
Layer. (dimensions are in inches)
Bill of Material
Reference Des.
L1
Value Description
Manuf. Part Number
Murata
9.1 nH
6.8 nH
N/A
Chip Inductor, 0201, +/- 2 %
LQP03TN9N1J02
L2
Chip Inductor, 0201, +/- 2 %
SMA connector
3-layer
Murata
LQP03TN6N8J02
SMA
PCB
Radiall USA 9602-1111-018
Multiple 960999
N/A
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 5 of 8 -
© 2015 TriQuint
885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Performance Plots
Test conditions unless otherwise noted: Temp= +25°C
Frequency Response
Passband Response
0
0
-10
-20
-2
-30
d
d
-4
B
B
-40
-50
-60
-70
-6
-8
2363
2402.5
2442
2481.5
2521
2200
2325
2450
2575
2700
Frequency (MHz)
Frequency (MHz)
WidebandResponse
Input / Output VSWR
L
i
n
3
2.5
2
0
-10
-20
-30
-40
-50
-60
-70
M
a
g
1.5
1
2363
2402.5
2442
2481.5
2521
d
B
L
i
n
3
2.5
2
M
a
g
1.5
1
2363
2402.5
2442
2481.5
2521
20
1915
3810
5705
7600
Frequency (MHz)
Frequency (MHz)
Input Smith Chart
Output Smith Chart
1
1
0.8
0.6
0.4
0.2
0.8
0.6
0.4
0.2
0
0
0
-1
-0 .5
0.5
1
-1
-0.5
0
0.5
1
-0 .2
-0 .4
-0 .6
-0 .8
-1
-0.2
-0.4
-0.6
-0.8
-1
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 6 of 8 -
© 2015 TriQuint
885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Package Information, Marking and Dimensions
Package Style: CSP-5CT
Dimensions: 1.4 x 1.2 x 0.46 mm
Marking
code
MFG site
Date code
Body: Al2O3 ceramic
ID dot
94 M
Lid: Kovar or Alloy 42, Au over Ni plated
Terminations: Au plating 0.5 - 1.0 μm, over a 2-6 μm Ni
plating.
W W Y
All tolerances are 0.15 mm except overall length and width
0.10 mm.
0.46 NOM.
0.50 MAX.
1.40
1.25
0.50
The date code consists of: WW = 2 digit week,
Y = last digit of year, M = manufacturing site code.
Notes:
1. All dimensions shown are typical in millimeters.
2. An asterisk (*) in front of the marking code indicates
prototype.
1.20 0.325
0.25
0.90
0.25
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. This drawing specifies the mounting pattern used on the TriQuint
evaluation board for this product. Some modification may be necessary
to suit end user assembly materials and processes.
Tape and Reel information
Standard T/R size=10,000 units/reel.
All dimensions are in millimeters.
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 7 of 8 -
© 2015 TriQuint
885062
2.4 GHz WLAN/BT LTE Co-Existence Filter
Product Compliance Information
ESD Sensitivity Ratings
Solderability
Compatible with the latest version of J-STD-020, lead
free solder, 260°C
Caution! ESD-Sensitive Device
Refer to Soldering Profile for recommended
guidelines.
ESD Rating: Class 1B
800 V
Value:
Test:
Standard:
RoHs Compliance
Human Body Model (HBM)
ESDA/JEDEC JS-001-2012
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment).
ESD Rating: 350 V
350 V
Value:
Test:
Standard:
Machine Model (MM)
JEDEC Standard JESD22-A115
This product also has the following attributes:
•
•
•
•
•
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
MSL Rating
Not applicable. Hermetic package.
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and
information about TriQuint:
Web: www.triquint.com
Email: info-sales@tqs.com
Tel:
Fax:
+1.407.886.8860
+1.407.886.7061
For technical questions and application information: Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information
contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein.
The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated
with such information is entirely with the user. All information contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The
information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or
anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-
sustaining applications, or other applications where a failure would reasonably be expected to cause severe
personal injury or death.
Data Sheet: Rev G 02/10/15
Disclaimer: Subject to change without notice
- 8 of 8 -
© 2015 TriQuint
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明