856931 [TRIQUINT]
710/740 MHz Duplexer; 七百四十〇分之七百一十MHz的双工器
| 型号： | 856931 |
| 厂家： | 
TRIQUINT SEMICONDUCTOR |
| 描述： | 710/740 MHz Duplexer |
| 文件： | 总9页 (文件大小：748K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
856931
710/740 MHz Duplexer
Applications
•
•
For Band 17 LTE applications
LTE Band 17 handsets, data cards, mobile routers
Product Features
Functional Block Diagram
Top View
• For LTE Band 17 applications
• Usable bandwidth 12 MHz (each band)
• High Tx-Rx isolation
Ant
6
Gnd
7
Gnd
5
• Low loss
• High attenuation
Rx
Out
8
1
Gnd
4
• Single ended - Balanced Rx operation
• Ceramic Chip Scale Package (CSP)
• Hermetic
Rx
Out
2
3
• RoHS compliant (2002/95/EC), Pb-free
Pb
Tx in
Gnd
General Description
Pin Configuration
Pin # SE-Balanced Description
1,8
856931 is a high-performance Surface Acoustic Wave
duplexer designed to meet the strict LTE requirements for
use in Band 17.
Rx output
Tx input
3
6
2,4,5,7,9
Antenna/Phasing inductor
Ground
The 856931 is specifically designed to meet the high
performance expectations of insertion loss, isolation and
linearity in LTE systems operating in Band 17 applications
under all operating conditions.
Ordering Information
The 856931 uses common module packaging techniques to
achieve the industry standard 2.5 x 2.0 mm2 footprint. The
duplexer exhibits excellent power handling capabilities.
Part No.
856931
856931-EVB
Description
Packaged Part
Evaluation Board
Standard T/R size = 10,000 units/reel.
Preliminary Data Sheet: Rev D 11/23/2011
- 1 of 9 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network
© 2011 TriQuint Semiconductor, Inc.
856931
710/740 MHz Duplexer
Preliminary Data Sheet
Tx - Electrical Specifications (1)
Specified Temperature Range: (2) -20 to +90 ºC
Parameter (3)
Conditions
Ant-Tx Specification
Min
Typical (4) Max Units
Center Frequency
Maximum Insertion Loss
-
-
710
1.8
-
2.5
MHz
dB
704 – 716 MHz
704 – 716 MHz (over any 5 MHz
in-band)
Amplitude Variation
-
0.7
1.2
dB p-p
10 – 686 MHz
32
15
45
33
30
30
30
43
44
40
50
45
50
45
30
10
10
34
30
49
38
35
35
45
50
51
52
60
62
60
60
55
12
12
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
728 – 734 MHz
734 – 746 MHz
746 – 768 MHz
768 –805 MHz
869 – 894 MHz
1408 – 1432 MHz
1565 – 1585 MHz
1597 – 1607 MHz
1805 – 1880 MHz
1930 – 1990 MHz
2110 – 2155 MHz
2155 – 2170 MHz
2400 – 2484 MHz
2816– 3000 MHz
704 – 716 MHz
704 – 716 MHz
Absolute Attenuation (5)
Return Loss at Tx
Return Loss at Antenna
Tx-Rx Specification
704 – 716 MHz (Differential)
704 – 716 MHz (Common-mode)
734 – 746 MHz (Differential)
1408 – 1432 MHz
54
54
50
30
30
30
56
56
52
50
50
50
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
Isolation
2112 – 2148 MHz
2816 – 3000 MHz
Tx Impedance (single-ended) (6)
Ant Impedance (single-ended)(6)
-
-
50
50
-
-
Ω
Ω
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Relative to zero dB
6. This is the optimum impedance in order to achieve the performance shown
Preliminary Data Sheet: Rev D 11/23/2011
- 2 of 9 -
Disclaimer: Subject to change without notice
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
856931
710/740 MHz Duplexer
Preliminary Data Sheet
Rx - Electrical Specifications (1)
Specified Temperature Range: (2) -20 to +90 ºC
Parameter (3)
Conditions
Ant-Rx Specification
Min
Typical (4)
Max Units
Center Frequency
Maximum Insertion Loss
-
-
740
1.9
-
2.5
MHz
dB
734 – 746 MHz
734 – 746 MHz (over any 5 MHz
in-band)
Amplitude Variation
-
0.5
1.2
dB p-p
10 – 674 MHz
674 – 686 MHz
686 - 704 MHz
45
53
35
50
32
32
40
40
35
10
10
-5.0
48
58
50
53
53
35
42
42
37
12
12
-
-
-
dB
dB
-
dB
dB
704 – 716 MHz
716 – 722 MHz
776 – 793 MHz
793 – 805 MHz
805 – 2300 MHz
2300 – 3000 MHz
734 – 746 MHz
734 – 746 MHz
734 – 746 MHz
734 – 746 MHz (Over any 5MHz
in-band)
-
Absolute Attenuation (5)
-
-
dB
dB
-
dB
dB
-
-
dB
dB
Return Loss at Rx
Return Loss at Antenna
Output phase balance
-
-
5.0
dB
degree
Output amplitude balance
-0.7
-
0.7
dB
IM2 product (6) (a,b)
-
-
-
-
-103
-102
50
-
-
dBm
dBm
Ω
IM3 product (6) (c,d)
ANT Impedance (single-ended ) (7)
Rx Impedance (balanced) (7)
-
100
-
Ω
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Relative to zero dB
6. All power levels are referenced to the antenna port. Two CW tones are applied at frequencies f1 and f2, and the resultant
intermodulation product in the Rx band is measured. The first tone is applied to the Tx port, in the range f1 = 704 to 716 MHz, at
+21.5 dBm (referenced to the antenna port). The second tone is -15 dBm, applied to the antenna port at f2, with the following four
cases:
a.
b.
c.
d.
f2 = 30 MHz
f2 = 2 * f1 + 30 MHz
f2 = f1 - 30 MHz
f2 = 3 * f1 + 30 MHz
The intermodulation product is measured at f1 + 30 MHz.
7. This is the optimum impedance in order to achieve the performance shown
Preliminary Data Sheet: Rev D 11/23/2011
- 3 of 9 -
Disclaimer: Subject to change without notice
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
856931
710/740 MHz Duplexer
Reference Design –Ant- 50Ω SE In, Tx-50Ω SE Out , Rx-100Ω Bal Out
Schematic
Notes:
1. Actual matching values may vary due to PCB layout and parasitic
PC Board
Mounting Configuration
Notes:
Notes:
Top, middle & bottom layers: 1 oz copper
Substrates: FR4 dielectric, .031” thick
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick
1. Top view of the duplexer.
2. All dimensions are in millimeters.
3. This footprint represents a recommendation only.
Bill of Material
Reference
Design
Value Description
Manufacturer
Part Number
L1 at ANT
Chip inductor,
11 nH
MuRata
LQW15AN11NG00
Wire wound, 0402, 2%
Chip inductor
L2 at Rx
L3 at Tx
MuRata
MuRata
LQW15AN56NH00
LQW15AN10NG00
56 nH
Wire-wound, 0402, 3%
Chip inductor
Wire-wound, 0402, 3%
10 nH
N/A
SMA connector
3-layer
Radiall USA Inc.
multiple
9602-1111-018
N/A
SMA
PCB
N/A
Preliminary Data Sheet: Rev D 11/23/2011
- 4 of 9 -
Disclaimer: Subject to change without notice
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
856931
710/740 MHz Duplexer
Tx - Typical Performance (at room temperature)
Preliminary Data Sheet: Rev D 11/23/2011
- 5 of 9 -
Disclaimer: Subject to change without notice
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
856931
710/740 MHz Duplexer
Tx –Rx Isolation Typical Performance (at room temperature)
Preliminary Data Sheet: Rev D 11/23/2011
- 6 of 9 -
Disclaimer: Subject to change without notice
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
856931
710/740 MHz Duplexer
Rx -Typical Performance (at room temperature)
Preliminary Data Sheet: Rev D 11/23/2011
- 7 of 9 -
Disclaimer: Subject to change without notice
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
856931
710/740 MHz Duplexer
Mechanical Information
Package Information, Dimensions and Marking
Package Style: CSP-10KT
Dimensions: 2.5 x 2.00 x 0.56 mm
Body: Al2O3 ceramic
Lid: Kovar or Alloy 42, Au over Ni plated
Terminations: Au plating 0.5 - 1.0µm, over a 2-6µm Ni plating
All dimensions shown are nominal in millimeters
All tolerances are 0.15mm except overall length and width
0.10mm
The date code consists of: WW = 2 digit week,
Y = last digit of year, M = manufacturing site code
Tape and Reel Information
Standard T/R size = 10,000 units/reel. All dimensions are in millimeters
8.8
2.7
Ø330
ID dot
4.0
Ø1.5
A
1.75
3.5
0.3
2.0
8.0
Direction of travel
Ø102
2.75
2.23
Ø20.2
Ø13.0
2.0
4.0
Ø1.0
A
1.1
Section A-A
Absolute Maximum Ratings
Parameter
Rating
Operating Temperature
Storage Temperature
Input Power(1) at TX
-20 to +90 oC
-40 to +90 oC
+29 dBm
1. 55oC equivalent 5000 hours. All ports matched to 50 Ohms.
Operation of this device outside the parameter ranges given above may cause permanent damage.
Preliminary Data Sheet: Rev D 11/23/2011
- 8 of 9 -
Disclaimer: Subject to change without notice
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
856931
710/740 MHz Duplexer
Product Compliance Information
ESD Information
Solderability
Compatible with the latest version of J-STD-020, lead
free solder, 260°C
Refer to Soldering Profile for recommended guidelines.
ESD Rating: Class 0
Value:
Test:
Standard:
Passes ≤ 150 V min.
Human Body Model (HBM)
JEDEC Standard JESD22-A114
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
ESD Rating: Class A
This product also has the following attributes:
Value:
Test:
Standard:
Passes ≤ 150 V min.
Machine Model (MM)
JEDEC Standard JESD22-A115
•
•
•
•
•
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
MSL Rating
Devices are Hermetic, therefore MSL is not applicable.
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:
Web: www.triquint.com
Email: info-sales@tqs.com
Tel:
Fax:
+1.407.886.8860
+1.407.886.7061
For technical questions and application information:
Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Preliminary Data Sheet: Rev D 11/23/2011
- 9 of 9 -
Disclaimer: Subject to change without notice
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
相关型号：
©2020 ICPDF网 联系我们和版权申明