TSR0.5-2415SM [TRACOPOWER]
DC/DC Converters;型号: | TSR0.5-2415SM |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总3页 (文件大小:245K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
TSR 0.5SM Series, 0.5 A Switching Regulator
Features
◆ Compact SMD package
◆ Very high efficiency up to 97%
◆ Excellent line / load regulation
◆ Low standby current
◆ Operating temperature range –40 to 90°C
◆ Over-temperature protection
◆ Remote On/Off input
◆ Adjustable output voltage
◆ Short circuit protection
◆ Moisture sensitivity level 2
as per IPC J-STD-020D.1
TSR-0.5SM is a series of step-down non–isolated switching regulators in compact
SIP package. These converters are an ideal alternative to LM78 linear regulators
when energy efficiency is a parameter of the design. The high efficiency up to 97 %
allows full load operation up to +80°C (+90°C with 50% load) ambient temperature
without the need of forced aircooling.
◆ꢀ3-year product warranty
Excellent output voltage accuracy and low standby current are other features that-
distinguish switching regulators from linear regulators.
Models
Order code
Input voltage range 1)
Output voltage
Output current
max.
Efficiency typ.
@ Vin min. Vin 32VDC
nominal
trim range 2)
1.4 – 2.5 VDC
1.5 – 3.0 VDC
1.5 – 3.0 VDC
3.0 – 5.5 VDC
3.0 – 8.0 VDC
3.3 – 11.0 VDC
4.5 – 12.6 VDC
4.5 – 13.5 VDC
4.5 – 15.5 VDC
@
TSR 0.5-2415SM
TSR 0.5-2418SM
TSR 0.5-2425SM
TSR 0.5-2433SM
TSR 0.5-2450SM
TSR 0.5-2465SM
TSR 0.5-2490SM
TSR 0.5-24120SM
TSR 0.5-24150SM
1.5 VDC
1.8 VDC
2.5 VDC
3.3 VDC
5.0 VDC
6.5 VDC
9.0 VDC
12 VDC
15 VDC
73 %
82 %
87 %
91 %
94 %
95 %
96 %
97 %
97 %
63 %
71 %
77 %
81 %
86 %
88 %
92 %
94 %
95 %
4.75 – 32 VDC
0.5 A
6.5 – 32 VDC
8 – 32 VDC
11 – 32 VDC
15 – 32 VDC
18 – 32 VDC
1) For input voltage higher 24 VDC an input capacitor 22 µF/ 50 V is required
2) Input voltage must be higher than output voltage set:>1.5 V for 3.3–5.0V and >3 V for 6.5–15.0V
http://www.tracopower.com
Page 1 of 3
DC/DC Converters
TSR 0.5SM Series
0.5 A
Input Specifications
No load input current (at 24Vin)
Short circuit input power
Surge voltage
5 mA typ.
1.5 W max.
–0.3 / 34 VDC max.
Input filter
internal capacitor, see filter suggestion page 3
for to meet EN55022 class A, class B
ESD (electrostatic discharge)
Radiated immunity
Fast transient
EN 61000-4-2, air 8 kV, perf. criteria A
EN 61000-4-3 3 V/m, perf. criteria A
EN 61000-4-4, 0.5 kV, perf. criteria A
with external input capacitor e.g. Nippon
chemi-con KY 330 µF, 100 V
Conducted immunity
EN 61000-4-6, 3 Vrms, perf. criteria A
EN 61000-4-8, 3 A/m, perf. criteria A
Magnetic field immunity
Output Specifications
Voltage set accuracy
3 % (at full load)
Regulation
– Input variation
1.5 to 6.5 Vin models: 0.4 %
other models: 0.2 %
– Load variation (10 – 100 %) 1.5 to 6.5 Vin models: 0.6 %
other models: 0.4 %
Minimum load
not required
Ripple and noise
1.5 to 6.5 Vin models: 30 mVp-p max.
other models: 40 mVp-p max.
Temperature coefficient
0.015 %/K max.
Dynamic load
(50% load step change)
– Peak variation
– Response time
2 % max.
100 µS max.
Short circuit protection
Capacitive load
continuous, automatic recovery
220 µF max.
General Specifications
Temperature ranges
– Operating
–40°C to +90°C
+100°C. max.
–55°C to +125°C
– Case temperature
– Storage
Derating
– positive output circuit
5 %/K above +80°C
at +160°C (on internal IC)
95 % rel H max.
Overtemperature protection
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
>2´000’000 h
Isolation voltage
none
Switching frequency
330 kHz 50 kHz (pulse width modulation)
Remote On/Off
– On:
2.4 – 5.0 VDC (ref. to GND) or open circuit.
0 – 1.6 VDC (ref. to GND) or connect. to GND
35 µA max.
– Off:
– Off idle current (at 24 Vin):
Environmental compliance – Reach
www.tracopower.com/info/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Physical Specifications
Casing material
Pin material
non-conductive plastic (UL94V-0 rated)
phosphor bronce
Weight
1.7 g (0.6 oz)
Lead-free reflow solder process
Moisture sensitivity level (MSL)
Washing
as per J-STD-020D.01
level 2 as per IPC J-STD-020D.1
baking after washing: 100°C for 30 min.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
DC/DC Converters
TSR-0.5SM Series
0.5 A
Applications notes
Output voltage adjustment
R1 <-----------------------
open
-----------------------> R2
[KOhm]
1.0
3
0.2
88.4
17
15
26
17
10.5
Min.
Nominal
1.5 VDC
1.8 VDC
2.5 VDC
3.3 VDC
5.0 VDC
6.5 VDC
9.0 VDC
12 VDC
15 VDC
Max.
[KOhm]
0.47
4.64
44.2
3.9
2.32
0.825
0
TSR 0.5-2415SM
TSR 0.5-2418SM
TSR 0.5-2425SM
TSR 0.5-2433SM
TSR 0.5-2450SM
TSR 0.5-2465SM
TSR 0.5-2490SM
TSR 0.5-24120SM
TSR 0.5-24150SM
1.4 VDC
1.5 VDC
1.5 VDC
3.0 VDC
3.0 VDC
3.3 VDC
4.5 VDC
4.5 VDC
4.5 VDC
2.5 VDC
3.0 VDC
3.0 VDC
5.5 VDC
8.0 VDC
11 VDC
12.6 VDC
13.5 VDC
15.5 VDC
+Vin
+Vout
Adj
TSR 0.5SM
R1
R2
On/Off
GND
GND
57.6
300
L1
EMI filter for EN 55022 class A & B
+Vin
TSR 0.5SM
GND
+Vout
C1
C2
C3
Load
Class
C1
C2 & C3
L1
value
order code
(SMD type)
datasheet:
A
B
–
3.3 µH
10 µH
TCK-044
TCK-047
www.tracopower.com/products/tck044.pdf
www.tracopower.com/products/tck047.pdf
4.7 µF / 50 V 1206 MLCC
4.7 µF / 50 V 1206 MLCC
Outline Dimensions
15.3 (0.60)
Pinout
1
2
+Vin
Seating Plane
S
+Vin
3
GND
+Vout
+Vout
adj.
0.1 S
4
4x 2.54 (0.10)
2.57
(0.10)
5
Recommended solder pad:
4x 2.54 (0.10)
6
7
GND
GND
GND
On/Off
10
1
9
2
8
top view
3
7
4
6
5
8
9
10
1.30 (0.05)
0.55 (0.02)
Dimensions in [mm], () = Inch
Tolerances: 0.5 ( 0.02)
1.2 (0.05)
Pin pich tolerances: 0.25 ( 0.01)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. July 13, 2018
www.tracopower.com
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明