THL10_16 [TRACOPOWER]
DC/DC Converters;型号: | THL10_16 |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总4页 (文件大小:213K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
THL 10 Series, 10 Watt
Features
◆ 10 Watt in 1” x 1” package
CB
Scheme
UL 60950-1
UL 60950-1
226037
◆ Shielded metal case with isolated
baseplate
◆ Wide 2:1 input voltage ranges
◆ Operating temp. range –40°C to +80°C
and up to +85°C with heat-sink
◆ I/O isolation voltage 1500 VDC
◆ Input filter meets EN 55022 class A
without external components
◆ Cost optimized design
◆ Industry standard pinout
◆ 3-year product warranty
The THL 10 is a series of general purpose 10 Watt dc/dc-converters packed in the
compact 1” x 1” case and is a pin to pin replacement for the popular 1” x 2” size
products. The industrial standard pinout, the wide 2:1 input voltage range and the
input filter that meets EN 55022 Class A without external components make these
converters easy to design in and suitable for to cost optimize many existing and new
applications.
The models have short circuit and overvoltage protection and are applicable in tem-
perature ranges of up to +80°C or +85°C with optional mounted heat sink. Typical
applications are instrumentation, distributed power architectures in communication
and industrial electronics.
Models
Order code
THL 10-1210
THL 10-1211
THL 10-1212
THL 10-1213
THL 10-1221
THL 10-1222
THL 10-1223
THL 10-2410
THL 10-2411
THL 10-2412
THL 10-2413
THL 10-2421
THL 10-2422
THL 10-2423
THL 10-4810
THL 10-4811
THL 10-4812
THL 10-4813
THL 10-4821
THL 10-4822
THL 10-4823
Input voltage range
Output voltage
3.3 VDC
5.1 VDC
12 VDC
15 VDC
5.0 VDC
12 VDC
15 VDC
3.3 VDC
5.1 VDC
12 VDC
15 VDC
5.0 VDC
12 VDC
15 VDC
3.3 VDC
5.1 VDC
12 VDC
15 VDC
5.0 VDC
12 VDC
15 VDC
Output current max.
2500 mA
2000 mA
830 mA
Efficiency typ.
82 %
85 %
87 %
88 %
84 %
87 %
87 %
83 %
85 %
87 %
89 %
85 %
88 %
89 %
83 %
85 %
89 %
89 %
86 %
87 %
88 %
9 – 18 VDC
670 mA
(12 VDC nominal)
1000 mA
416 mA
333 mA
2500 mA
2000 mA
830 mA
18 – 36 VDC
670 mA
(24 VDC nominal)
1000 mA
416 mA
333 mA
2500 mA
2000 mA
830 mA
36 – 75 VDC
670 mA
(48 VDC nominal)
1000 mA
416 mA
333 mA
http://www.tracopower.com
Page 1 of 4
DC/DC Converters
THL 10 Series
10 Watt
Input Specifications
Input current at no load (at nominal input voltage)
12 Vin models: 15 mA typ.
24 Vin models: 12 mA typ.
48 Vin models: 10 mA typ.
Input current at full load (at nominal input voltage)
12 Vin; 3.3 VDC models: 800 mA typ.
12 Vin; other models: 1000 mA typ.
24 Vin; 3.3 VDC models: 400 mA typ.
24 Vin; other models: 500 mA typ.
48 Vin; 3.3 VDC models: 200 mA typ.
48 V; other models: 250 mA typ.
Start-up voltage / under voltage lockout
12 Vin models: 9.0 / 8.5 VDC (or lower)
(hysteresis for assertive on)
24 Vin models: 18 / 17 VDC (or lower)
48 Vin models: 36 / 34 VDC (or lower)
(long term operation at undervoltage will
demage the converter!)
Surge voltage (1 sec. max.)
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise (input)
EN 55022 class A, FCC part 15, level A
without external components
ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
Radiated immunity
EN 61000-4-3, 10 V/m, perf. criteria A
Fast transient / Surge
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 1 kV perf. criteria A
with external capacitor
Conducted immunity
EN 61000-4-6, 10 Vrms, perf. criteria A
Output Specifications
Voltage set accuracy
2 %
Regulation
– Input variation (Vmin – Vmax)
– Load variation
1.0 % max.
single output models: 0.5 % max. (0 – 100 % load)
dual output models: 1.0 % max. (0 – 100 % balanced load)
cross regulation: 5 % max. (25% / 100% asymmetrical load)
Minimum load
not required
Ripple and noise (20 MHz bandwidth)
3.3 & 5.0 VDC models: 80 mVp-p typ.
other models: 100 mVp-p typ.
Temperature coefficient
Output current limitation
Short circuit protection
0.02 %/K
>110 % of Iout max.
hiccup, automatic recovery
300 µs typ. (25 % load step change)
Transient response setting time
Maximum capacitive load
3.3 VDC models: 4700 µF
5.1 VDC models: 2200 µF
12 VDC models: 330 µF
15 VDC models: 220 µF
5.0 VDC models: 1000 µF (each output)
12 VDC models: 150 µF (each output)
15 VDC models: 100 µF (each output)
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
THL 10 Series
10 Watt
General Specifications
Temperature ranges
– Operating without heat sink
– Operating with heat sink
– Case temperature
– Storage
–40°C to +80°C (with derating)
–40°C to +85°C (with derating)
+100°C max.
–50°C to +125°C
Power derating
– Operating without heat sink
– Operating with heat sink
2.5 %/K above +60°C
3.5 %/K above +70°C
Humidity (non condensing)
95 % rel H max.
2’596’000 h
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60 sec.) – Input/Output
1’500 VDC
Isolation capacitance
Isolation resistance
– Input/Output
2000 pF max.
>1’000 MOhm
– Input/Output (500 VDC)
Switching frequency (fixed)
Altitude during operation
Safety standards
300 kHz typ. (pulse width modulation PWM)
5‘000 m max. (16‘400 ft) approved
UL/cUL 60950-1, IEC/EN 60950-1
www.tracopower.com/overview/thl10
– Certification documents (pending)
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Physical Specifications
Casing material
Baseplate
metal
non conductive FR4
epoxy (UL 94V-0 rated)
tinned copper
Potting material
Pin material
Weight
15 g (0.53oz)
Soldering temperature
max. +260°C / 10sec.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
THL 10 Series
10 Watt
Outline Dimensions
7.62
(0.3)
5.08
(0.2)
Pin-Out
Pin
1
Single
+Vin (Vcc)
–Vin (GND) –Vin (GND)
Dual
1
2
+Vin (Vcc)
2
Bottom view
4
3
+ Vout
No pin
–Vout
+ Vout
Common
–Vout
3
5
4
5
10.16 10.16
(0.4)
2.5
(0.1)
6.0
(0.24)
10.2
(0.4)
(0.4)
25.4
(1.0)
Dimensions in [mm], () = Inch
Pin diameter ø 1.0 (0.04)
Pin pitch tolerances: 0.25 ( 0.01)
Tolerances: 0.5 ( 0.02)
Heat-Sink (Option)
Order code: THL-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Aluminum
Anodic treatment (black)
4.0 g (0.14oz) without converter
Material:
Finish:
Weight:
Thermal impedance after assembling: 15.8 K/W
31.0 (1.22) max.
Heat-sink
Thermal pad
Clamp
Note:
The product label on converter has to be re-
moved before mounting the heat-sink.
For volume orders converters will be sup-
plied with heat-sink already mounted. Please
contact factory for quotation.
Converter
17.5 (0.69)
max.
Separate heat-sinks are only available for
prototypes and small quantity orders.
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. April 28. 2016
www.tracopower.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明