TES2-1211M [TRACOPOWER]
DC/DC Converters;型号: | TES2-1211M |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总3页 (文件大小:242K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
TES 2M Series, 2 Watt
CB
Scheme
Features
UL 60950-1
ES 60601-1
IEC 60950-1
◆ Supplementary and reinforced insulation
IEC 60601-1
◆ I/O isolation 4000 VACrms rated for
300 Vrms working voltage
◆ 2 x MOOP Medical safety according to
AAMI/ANSI ES 60601-1:2005(R) and
IEC/EN 60601-1 3rd edition
◆ Industrial safety to UL/IEC/EN 60950-1
◆ Ultracompact SMD-package
◆ Operating temp. range –25°C to +80°C
◆ Qualified for leadfree reflow solder
process
◆ Available in tape & reel package
◆ 3-year product warranty
The TES 2M series is range of compact 2W DC/DC-converters providing a high
I/O-isolation voltage of 4000 VAC. With a reinforced I/O-isolation system this pro-
duct is an economical solution for many applications in instrumentation, industrial
controls, medical equipment and everywhere where supplementary- or reinforced
insulation is required.
These converters are qualified for high solder temperature profiles in leadfree sol-
der processes. For automated SMD production lines the devices can be supplied
in tape & reel package. Full SMD-design with exclusive use of ceramic capacitors
ensure a very high reliability and a long product lifetime.
Models
Ordercode
Input voltage range
Output voltage
Output current max.
Efficiency typ.
TES 2-0511M
TES 2-0512M
TES 2-0513M
TES 2-0522M
TES 2-0523M
TES 2-1211M
TES 2-1212M
TES 2-1213M
TES 2-1222M
TES 2-1223M
TES 2-2411M
TES 2-2412M
TES 2-2413M
TES 2-2422M
TES 2-2423M
5 VDC
12 VDC
15 VDC
±12 VDC
±15 VDC
5 VDC
400 mA
165 mA
133 mA
±±3 mA
±66 mA
400 mA
165 mA
133 mA
±±3 mA
±66 mA
400 mA
165 mA
133 mA
±±3 mA
±66 mA
66 %
66 %
66 %
72 %
73 %
66 %
66 %
66 %
74 %
75 %
66 %
66 %
66 %
74 %
75 %
5.0 VDC 10ꢀ
(nominal 05 VDC)
12 VDC
15 VDC
±12 VDC
±15 VDC
5 VDC
12.0 VDC 10ꢀ
(nominal 12 VDC)
12 VDC
15 VDC
±12 VDC
±15 VDC
24 VDC 10ꢀ
(nominal 24 VDC)
www.tracopower.com
Page 1 of 3
DC/DC Converters
TES 2M Series
2 Watt
Input Specifications
Input current no load
5 Vin models: 60 mA typ.
12 Vin models: 30 mA typ.
24 Vin models: 15 mA typ.
Reverse voltage protection
0.3 A max.
Recommended input fuse (slow blow)
5 Vin models: 1.0 A
12 Vin models: 0.5 A
24 Vin models: 0.2 A
Surge voltage (1 sec. max.)
5 Vin models:
12 Vin models: 1± V max.
24 Vin models: 30 V max.
9 V max.
Input filter
internal capacitors
Output Specifications
Voltage set accuracy
±4 %
Voltage balance (dual output models)
1 % max.
Regulation
– Input variation
– Load variation 20 – 100 %
1.2 % / 1 % change of Vin
10 % max.
12 % max. for 5 Vout models.
Ripple and noise (0–20 MHz Bandwidth)
Temperature coefficient
Short circuit protection
Minimum load
150 mVp-p max.
±0.02 %/K
0.5 sec. max. (automatic recovery)
2 % of rated max current.
Capacitive load
single output models: 330 µF max.
dual output models: 100 µF max. (each output)
General Specifications
Temperature ranges
– Operating
– Storage
– Case temperature
–25°C to +±0°C
–55°C to +125°C
+90°C max.
Derating
2.5 %/K above 60°C
95 % rel. H max.
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign)
Isolation voltage (50Hz, 60sec.) – Input/Output
Isolation test voltage (1 sec.)
>2.0 Mio h
4000 VACrms (reinforced)
6000 Vpk
Leakage current (at 240VAC, 60Hz)
2 µA max.
Isolation capacitance
Isolation resistance
Safety approvals
– Input/Output
– Input/Output
20 pF max. (at 100KHz, 1V)
>10 Gohm (at 500VDC)
IEC/EN 60950-1, IEC/EN 60601-1 3rd Edition,
ANSI/AAMI ES60601-1 and CAN/CSA-C22.2
No. 60601-1, Medical Electrical Equipment -
Part 1: General Requirements for Basic Safety
and Essential Performance
– Certification documents
www.tracopower.com/overview/tes2m
Switching frequency
50 – 100 kHz (PFM)
Environmental compliance – Reach
www.tracopower.com/info/reach-declaration.pdf
directive 2011/65/EU
– RoHS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2 of 3
DC/DC Converters
TES 2M Series
2 Watt
Physical Specifications
Casing material
plastic
Pin material
phosphor bronze
Weight
3.± g (0.13oz)
Lead-free reflow solder process
as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Moisture sensivity level (MSL)
level 2 as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
Supporting Documents: www.tracopower.com/overview/tes2m
Outline Dimensions
24.0 (0.94)
0 - 4°
1.0 (0.04)
0.15
Ø1.5 (Ø 0.06) vent hole with membrane on bottom side
(to allow proper washing process)
10.6 (0.42)
16
10
9
8
Pin-Out
Single
Pin
1
Dual
top view
–Vin (GND) –Vin (GND)
7
No con.
No con.
+Vout
No con.
Common
+Vout
1
7
8
9
3.11 (0.12)
15.24 (0.60)
2.54 (0.10)
10
16
–Vout
–Vout
+Vin
+Vin
1.4 (0.055) min.
Solder Pad Dimension
Dimensions in [mm], () = Inch
Tolerances 0.25 ( 0.01)
Pin pitch tolerances 0.05 ( 0.002)
3.11 (0.12)
15.24 (0.60)
2.54 (0.10)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. July 13, 2018
www.tracopower.com
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明