TEN40-4811N [TRACOPOWER]
DC/DC Converters;型号: | TEN40-4811N |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总4页 (文件大小:289K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
TEN 40N Series, 40 Watt
CB
Scheme
Features
IEC 60950-1
UL 60950-1
◆ Highest power density:
40 W in 1” x 2” x 0.4” package
◆ Excellent efficiency up to 92 %
◆ Output voltage adjustable
◆ Remote On/Off
◆ Short circuit protection
◆ Over voltage protection
◆ I/O isolation 1500 VDC
◆ Operating temperature range
The TEN 40N Series is a new range of isolated high performance dc-dc converter
modules. Due to the very high efficiency of up to 92% these 40 W converters come
with a footprint of only 1.0” x 2.0”. The 15 models have a wide 2:1 input voltage
range and a tight output voltage regulation. The output voltage is adjustable by ex-
ternal resistor. Remote On/Off and protection against overpower and overvoltage
are standard features of these converters.
–40°C to +80°C
◆ Fully RoHS compliant
◆ 3-year product warranty
Typical applications are in mobile equipment, instrumentation, distributed power
architectures in communication and industrial electronics and everywhere where
space on the PCB is critical.
Models
Order code
Input voltage range
Output voltage
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
Output current max.
8‘000 mA
8’000 mA
3‘333 mA
2‘670 mA
1‘670 mA
1’670 mA
1‘330 mA
8‘000 mA
8’000 mA
3‘333 mA
2‘670 mA
1‘670 mA
1’670 mA
1‘330 mA
8‘000 mA
8’000 mA
3‘333 mA
2‘670 mA
1‘670 mA
1’670 mA
1‘330 mA
Efficiency
89 %
89 %
89 %
90 %
91 %
88 %
88 %
90 %
91 %
91 %
91 %
91 %
89 %
89 %
90 %
91 %
92 %
92 %
91 %
89 %
89 %
TEN 40-1210N
TEN 40-1211N
TEN 40-1212N
TEN 40-1213N
TEN 40-1215N
TEN 40-1222N
TEN 40-1223N
TEN 40-2410N
TEN 40-2411N
TEN 40-2412N
TEN 40-2413N
TEN 40-2415N
TEN 40-2422N
TEN 40-2423N
TEN 40-4810N
TEN 40-4811N
TEN 40-4812N
TEN 40-4813N
TEN 40-4815N
TEN 40-4822N
TEN 40-4823N
9 – 18 VDC
(nominal 12 VDC)
18 – 36 VDC
(nominal 24 VDC)
36 – 75 VDC
(nominal 48 VDC)
www.tracopower.com
Page 1 of 4
DC/DC Converters
TEN 40N Series
40 Watt
Input Specifications
Input current at no load
12 Vin;
12 Vin;
12 Vin;
12 Vin;
24 Vin;
24 Vin;
24 Vin;
48 Vin;
48 Vin;
48 Vin;
3.3 VDC models: 120 mA typ.
(nominal input voltage)
5.0, 12 & 24 VDC models: 160 mA typ.
15 VDC models: 150 mA typ.
12 & 15 VDC dual output models: 70 mA typ. / 60 mA typ.
3.3 & 15 VDC models: 75 mA typ.
5.0, 12 & 24 VDC models: 80 mA typ. / 85 mA typ.
12 & 15 VDC dual output models: 50 mA typ. / 45 mA typ.
3.3 VDC models: 40 mA typ.
other single output models: 50 mA typ.
dual output models: 65 mA typ.
Surge voltage (100 ms max.)
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Reflected input ripple current
12 Vin models: 50 mA typ.
24 Vin models: 30 mA typ.
48 Vin models: 20 mA typ.
Start-up voltage / under voltage shut down
12 Vin models: 9.0 VDC max. / 8.3 VDC typ.
24 Vin models: 18 VDC max. / 16.5 VDC typ.
48 Vin models: 36 VDC / 33 VDC typ.
Recommended input fuse (slow blow)
12 Vin models: 8000 mA
24 Vin models: 4000 mA
48 Vin models: 2000 mA
Conducted noise (input)
EN 55032 class A with external components
see application note
EMC immunity
– ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria B
– Radiated immunity
– Fast transient / surge (with external input capacitor)
EN 61000-4-3, 10 V/m, perf. criteria A
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 1 kV perf. criteria B
Nippon chemi-con KXG 330 µF, 200 V
EN 61000-4-6, 10 Vrms, perf. criteria A
– Conducted immunity
Output Specifications
Voltage set accuracy
1.0 %
Output voltage adjustment range
24 VDC models: +20 / –10 %
other models: 10 % with external resistor (see page 3)
Regulation
– Input variation Vin min. to Vin max.
– Load variation
0.5 % max.
single output models (0 – 100 %): 0.5 % max.
dual output models balanced load (10 – 100 %): 1.0 % max.
single output models: 0 %
Minimum load
dual output models: 10 % of rated max current (operation at lower
load condition will not damage the converters.
However, they may not meet all listed specifications)
Temperature coefficient
0.02 %/K
Ripple and noise (20 MHz Bandwidth)
with external capacitors 1 µF M/C 10 µF T/C
3.3 & 5.0 VDC models: 100 mVpk-pk. typ.
other models: 150 mVpk-pk typ.
Transient response (25 % load step change)
250 µs typ.
Output current limitation
110 % – 150 % of Iout max.
Short circuit protection
24 VDC models: 0.3 Hz. typ.
other models: hiccup mode 1.5 Hz, automatic recovery
Capacitive load
3.3 VDC models: 21’000 µF max.
5.0 VDC models: 13’600 µF max.
12.0 VDC models: 2’400 µF max.
15.0 VDC models: 1’500 µF max.
24.0 VDC models: 600 µF max.
12.0 VDC models: 1’200 µF max.
15.0 VDC models: 750 µF max.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2 of 4
DC/DC Converters
TEN 40N Series
40 Watt
General Specifications
Temperature ranges
– Operating (natural convection cooling 20 LFM)
– Case temperature
–40°C to +80°C (see load derating)
+105°C max.
– Storage
–50°C to +125°C
Load derating
(natural convection cooling 20 LFM)
– without heatsink
3.3 VDC models: 2.5 %/K above 66°C
other single output models: 1.6 %/K above 46°C
dual output models: 1.5 %/K above 40°C
3.3 VDC models: 3.1 %/K above 73°C
– with heatsink
other single output models: 2.0 %/K above 57°C
dual output models: 1.9 %/K above 52°C
Over temperature protection
at +110°C typ.
Humidity (non condensing)
95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
328’000 h
1500 VDC
Isolation voltage (60 s)
Isolation capacitance
Isolation resistance
– Input/Output
– Input/Output
– Input/Output
1500 pF typ.
>1000 Mohm
Switching frequency (fixed)
24 VDC models: 285 kHz typ.
other models: 320 kHz typ. (pulse width modulation PWM)
Altitude during operation
Safety standards
5‘000 m max. (16‘400 ft) approved
IEC/EN 60950-1 (2nd Ed) + A1:2009
CAN/CSA-C22.2 No 60950-1-07 + Am1:2011
UL 60950-1, (2nd Ed) + Am1:2011
– Certification documents
www.tracopower.com/overview/ten40n
Remote On/Off
– On:
– Off:
– Off idle current:
3.5 to 12 VDC or open circuit.
0 to +1.2 VDC or short circuit pin 3 and pin 2
2.5 mA max.
Physical Specifications
Casing material
aluminum
Potting material
epoxy (UL 94V-0 rated)
30 g (1.05 oz)
Weight
Soldering temperature
260°C / 10 s max.
Environmental compliance – Reach
www.tracopower.com/info/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Application note: www.tracopower.com/overview/ten40n
Output Voltage Adjustment
Trim up
Trim
Trim down
+Vout
Trim
Rd
Ru
-
Vout
Ru [kohm]*
Ru [kohm]*
output
+5%
+10%
3.3V
7.34 12.30 41.40 50.15 +10%
0.65 0.48 2.70 3.58 +20%
5V
12V
15V
output 24V
output
–5%
–10%
3.3V
8.51 16.53 47.15 63.35 38.04
0.50 1.24 1.35 4.92 1.12
5V
12V
15V
24V
27.38
0.34
*approximate values
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 3 of 4
DC/DC Converters
TEN 40N Series
40 Watt
Outline Dimensions
50.8
(2.0)
Pin-Out
Pin
1
Single
Dual
4
+Vin (Vcc)
+Vin (Vcc)
1
2
2
–Vin (GND) –Vin (GND)
Remote On/Off
Bottom View
3
5
6
4
+Vout
–Vout
Trim
+Vout
Common
–Vout
3
5
6
(1.8)
2.54 (0.1)
45.72
Dimensions in [mm], () = Inch
Pin diameter: 1.0 0.05 (0.04 0.002)
Pin pitch tolerance: 0.13 ( 0.005)
Case tolerances: 0.25 ( 0.01)
* 11.0mm(0.43 inch) for 24V Output Models
Heat-sink (optional)
Order code: TEN HS6 for 24 VDC output models
TEN-HS4 for other models
Heat-sink
Thermal pad
Clamp
(cont.: heat-sink, thermal pad, 2 clamps)
Converter
Material:
Finish:
Weight:
Aluminum
Anodic treatment (black)
9 g (0.32oz) without converter
31.1 (1.22)
H
Thermal impedance after assembling: 10 K/W
Note:
Before attaching the heatsink, the product
label on converter has to be removed for
optimal performance.
For volume orders we can supply the
converters with heatsink already mounted.
Please contact us for a relative quotation.
H = 18.0 ( 0.71) for 24 VDC output model with TEN-HS6
H = 17.2 (0.68) for other models with TEN-HS4
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. June 04, 2018
www.tracopower.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明