TMP95C061BFG [TOSHIBA]

TLCS-900/H Series; TLCS - 900 / H系列


型号：	TMP95C061BFG
厂家：	TOSHIBA
描述：	TLCS-900/H Series TLCS - 900 / H系列微控制器和处理器外围集成电路时钟
文件：	总213页 (文件大小：9647K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TOSHIBA Original CMOS 16-Bit Microcontroller

TLCS-900/H Series

TMP95C061BFG

TMP95C061BDFG

Semiconductor Company

TMP95C061B

Document Change Notification

The purpose of this notification is to inform customers about the launch of the Pb-free version of the

device. The introduction of a Pb-free replacement affects the datasheet. Please understand that this

notification is intended as a substitute for a revision of the datasheet.

Changes to the datasheet may include the following, though not all of them may apply to this

particular device.

1. Part number

Example: TMPxxxxxxF → TMPxxxxxxFG

All references to the previous part number were left unchanged in body text. The new

part number is indicated on the prelims pages (cover page and this notification).

2. Package code and package dimensions

Example: LQFP100-P-1414-0.50C → LQFP100-P-1414-0.50F

All references to the previous package code and package dimensions were left unchanged

in body text. The new ones are indicated on the prelims pages.

3. Addition of notes on lead solderability

Now that the device is Pb-free, notes on lead solderability have been added.

4. RESTRICTIONS ON PRODUCT USE

The previous (obsolete) provision might be left unchanged on page 1 of body text. A new

replacement is included on the next page.

5. Publication date of the datasheet

The publication date at the lower right corner of the prelims pages applies to the new

device.

2011-01-26

TMP95C061B

1. Part number

2. Package code and dimensions

Previous Part Number Previous Package Code

New Part Number New Package Code

(in Body Text)

TMP95C061BF

P-QFP100-1414-0.50

TMP95C061BFG

TMP95C061BDFG

QFP100-P-1414-0.50

LQFP100-P-1414-0.50F

(Note)

−

Note: Pb-containing variant not available.

*: For the dimensions of the new package, see the attached Package Dimensions diagram.

3. Addition of notes on lead solderability

The following solderability test is conducted on the new device.

Solderability

Test Parameter

Test Condition

Note

Use of Sn-37Pb solder Bath

Solder bath temperature = 230°C, Dipping time = 5 seconds

The number of times = one, Use of R-type flux

Use of Sn-3.0Ag-0.5Cu solder bath

Pass:

Solderability

Solderability rate until forming

≥ 95%

Solder bath temperature = 245°C, Dipping time = 5 seconds

The number of times = one, Use of R-type flux

4. RESTRICTIONS ON PRODUCT USE

It replaces the “RESTRICTIONS ON PRODUCT USE” on page 1 of body text. For details, see

the attached RESTRICTIONS ON PRODUCT USE.

5. Publication date of the datasheet

The publication date of this datasheet is printed at the lower right corner of this notification.

2011-01-26

TMP95C061B

(Annex)

Package Dimensions

QFP100-P-1414-0.50

Unit: mm

III

2011-01-26

TMP95C061B

LQFP100-P-1414-0.50F

Unit: mm

2011-01-26

TMP95C061B

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in

this document, and related hardware, software and systems (collectively “Product”) without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,

or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all

relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for

Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for

the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product

design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or

applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,

programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for

such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.

•

Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public

impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the

aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,

for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology

products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign

Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software

or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.

2011-01-26

TMP95C061BFG [TOSHIBA]

相关型号：

TMP95C061F

TMP95C063

TMP95C063BF

TMP95C063DFG

TMP95C063F

TMP95C063FG

TMP95C265F

TMP95C265FG

TMP95C265FG(JZ)

TMP95CS54F

TMP95CS64

TMP95CS64F