TLP3114_07 [TOSHIBA]

LOGIC IC TESTERS / MEMORY TESTERS; 逻辑IC测试器/内存测试仪
TLP3114_07
型号: TLP3114_07
厂家: TOSHIBA    TOSHIBA
描述:

LOGIC IC TESTERS / MEMORY TESTERS
逻辑IC测试器/内存测试仪

测试
文件: 总6页 (文件大小:176K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TLP3114  
TOSHIBA PHOTOCOUPLER PHOTO RELAY  
TLP3114  
MEASUREMENT INSTRUMENTS  
LOGIC IC TESTERS / MEMORY TESTERS  
BOARD TESTERS / SCANNERS  
Unit: mm  
The TOSHIBA TLP3114 Mini-flat photorelay is a small-outline  
photorelay, suitable for surface-mount assembly. The TLP3114 consists of  
a GaAs infrared-emitting diode optically coupled to a photo-MOS FET  
and housed in a 4-pin package.  
Its characteristics include low OFF-state current and low output pin  
capacitance, enabling it to be used in high-frequency measuring  
instruments.  
Features  
4 pin SOP (2.54SOP4)  
1-Form-A  
: 2.1 mm high, 2.54 mm pitch  
Peak Off-State Voltage  
Trigger LED Current  
On-State Current  
On-State Resistance  
Output Capacitance  
Isolation Voltage  
: 40 V (MIN.)  
: 4 mA (MAX.)  
: 250 mA (MAX.)  
: 3 Ω (MAX.), 2 Ω (TYP.)  
: 7 pF (MAX.), 5 pF (TYP.)  
: 1500 Vrms (MIN.)  
JEDEC  
JEITA  
TOSHIBA  
Weight: 0.1 g  
115H1  
Pin Configuration (top view)  
Schematic  
1
4
3
1
4
3
2
2
1 : ANODE  
2 : CATHODE  
3 : DRAIN  
4 : DRAIN  
1
2007-10-01  
TLP3114  
Absolute Maximum Ratings (Ta = 25°C)  
CHARACTERISTIC  
Forward Current  
SYMBOL  
RATING  
UNIT  
I
F
50  
0.5  
5
mA  
mA/°C  
V
>
Forward Current Derating (Ta 25°C)  
ΔI /°C  
F
=
Reverse Voltage  
V
R
Junction Temperature  
T
125  
40  
°C  
j
Off-State Output Terminal Voltage  
V
V
OFF  
On-State Current  
I
250  
mA  
ON  
>
On-State Current Derating (Ta 25°C)  
ΔI /°C  
ON  
2.5  
mA/°C  
=
Junction Temperature  
Storage Temperature Range  
Operating Temperature Range  
Lead Soldering Temperature (10 s)  
T
125  
40~125  
20~85  
260  
°C  
°C  
j
T
stg  
T
opr  
°C  
T
°C  
sol  
<
Isolation Voltage (AC, 1 minute, R.H. 60%) (NOTE1)  
BV  
1500  
Vrms  
=
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the  
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even  
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum  
ratings.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test  
report and estimated failure rate, etc).  
(NOTE1): Device considered a two-terminal device : Pins 1 and, 2 shorted together, and pins 3 and 4 shorted  
together.  
CAUTION  
This device is sensitive to electrostatic discharge. When using this device, please ensure that all tools and  
equipment are earthed.  
Recommended Operating Conditions  
CHARACTERISTIC  
Supply Voltage  
SYMBOL  
MIN.  
TYP.  
MAX.  
UNIT  
V
10  
25  
32  
30  
V
DD  
Forward Current  
I
F
mA  
mA  
°C  
On-State Current  
I
250  
60  
ON  
Operating Temperature  
T
opr  
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the  
device. Additionally, each item is an independent guideline respectively. In developing designs using this  
product, please confirm specified characteristics shown in this document.  
Individual Electrical Characteristics (Ta = 25°C)  
CHARACTERISTIC  
SYMBOL  
TEST CONDITION  
= 10 mA  
F
MIN.  
TYP.  
MAX.  
UNIT  
Forward Voltage  
Reverse Current  
Capacitance  
V
I
1.0  
1.15  
1.3  
10  
V
F
T
I
V
= 5 V  
R
μA  
pF  
R
C
V = 0, f = 1 MHz  
15  
Off-State Current  
Capacitance  
I
V
= 30 V, Ta = 50°C  
1000  
7
pA  
pF  
OFF  
OFF  
C
V = 0, f = 100 MHz, t < 1 s  
5
OFF  
2
2007-10-01  
TLP3114  
Coupled Electrical Characteristics (Ta = 25°C)  
CHARACTERISTIC  
Trigger LED Current  
SYMBOL  
TEST CONDITION  
= 100 mA  
MIN.  
TYP.  
MAX.  
UNIT  
I
I
I
I
0.2  
0.75  
2
4
3
mA  
mA  
Ω
FT  
ON  
Return LED Current  
On-State Resistance  
I
= 10 μA  
OFF  
FC  
R
= 250 mA, I = 5 mA, t < 1 s  
ON  
ON  
F
Isolation Characteristics (Ta = 25°C)  
CHARACTERISTIC  
SYMBOL  
TEST CONDITION  
MIN.  
TYP.  
0.8  
MAX.  
UNIT  
Capacitance Input to Output  
Isolation Resistance  
C
R
V
V
= 0 V, f = 1 MHz  
pF  
S
S
S
S
10  
14  
<
= 500 V, R.H. 60%  
5 × 10  
1500  
10  
Ω
=
AC, 1 minute  
Vrms  
Vdc  
Isolation Voltage  
BV  
S
AC, 1 second (in oil)  
DC, 1 minute (in oil)  
3000  
3000  
Switching Characteristics (Ta = 25°C)  
CHARACTERISTIC  
SYMBOL  
TEST CONDITION  
= 200 Ω (NOTE 2)  
MIN.  
TYP.  
MAX.  
UNIT  
Turn-on Time  
Turn-off Time  
t
500  
500  
ON  
R
V
L
μs  
= 10 V, I = 10 mA  
F
DD  
t
OFF  
(NOTE 2) : SWITCHING TIME TEST CIRCUIT  
I
F
V
DD  
1
2
4
3
R
L
I
F
V
OUT  
V
OUT  
90%  
10%  
t
t
OFF  
ON  
3
2007-10-01  
TLP3114  
I
Ta  
I
Ta  
ON  
F
100  
80  
60  
40  
20  
0
500  
400  
300  
200  
100  
0
-20  
0
20  
40  
60  
80  
100  
120  
-20  
0
20  
40  
60  
80  
100  
120  
Ambient temperature Ta (°C)  
Ambient temperature Ta (°C)  
I
V  
I
V  
ON  
F
F
ON  
100  
300  
200  
100  
0
Ta = 25 °C  
Ta = 25 °C  
50  
30  
I
= 5 mA  
F
10  
5
3
1
-100  
-200  
-300  
0.5  
0.3  
0.1  
0.6  
0.8  
1
1.2  
1.4  
F
1.6  
1.8  
-1  
-0.5  
0
0.5  
1
Forward voltage  
V
(V)  
On-sate voltage  
V
(V)  
ON  
R
ON  
Ta  
I
Ta  
FT  
5
4
3
2
1
5
4
3
2
1
I
I
= 250 mA  
I
= 100 mA  
ON  
ON  
= 5 mA  
t < 1s  
F
t < 1s  
0
0
-20  
0
20  
40  
60  
80  
100  
-20  
0
20  
40  
60  
80  
100  
Ambient temperature Ta (°C)  
Ambient temperature Ta (°C)  
4
2007-10-01  
TLP3114  
t
,t  
ON OFF  
I  
t
,t Ta  
ON OFF  
F
1000  
300  
250  
200  
150  
100  
50  
Ta = 25 ℃  
= 10 V,  
V
= 10 V,  
R = 200  
L
DD  
V
R = 200 Ω  
L
DD  
I
= 10 mA  
F
300  
100  
t
OFF  
t
OFF  
30  
10  
t
ON  
t
ON  
0
3
-20  
0
20  
40  
60  
80  
100  
1
10  
100  
Forward current  
I
(mA)  
Ambient temperature Ta (°C)  
F
I
VOFF  
C
V  
OFF OFF  
OFF  
1
0.8  
0.6  
0.4  
0.2  
15  
10  
5
Ta = 25 °C  
Ta = 25 ℃  
0
10  
20  
30  
40  
50  
0
10  
20  
30  
40  
Off-state output voltage V  
(V)  
Off-state output voltage V  
(V)  
OFF  
OFF  
5
2007-10-01  
TLP3114  
RESTRICTIONS ON PRODUCT USE  
20070701-EN  
The information contained herein is subject to change without notice.  
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor  
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical  
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of  
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of  
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.  
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as  
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and  
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability  
Handbook” etc.  
The TOSHIBA products listed in this document are intended for usage in general electronics applications  
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,  
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires  
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or  
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or  
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,  
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his  
document shall be made at the customer’s own risk.  
The products described in this document shall not be used or embedded to any downstream products of which  
manufacture, use and/or sale are prohibited under any applicable laws and regulations.  
The information contained herein is presented only as a guide for the applications of our products. No  
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which  
may result from its use. No license is granted by implication or otherwise under any patents or other rights of  
TOSHIBA or the third parties.  
GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,  
cut, crush or dissolve chemically.  
Please contact your sales representative for product-by-product details in this document regarding RoHS  
compatibility. Please use these products in this document in compliance with all applicable laws and regulations  
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses  
occurring as a result of noncompliance with applicable laws and regulations.  
6
2007-10-01  

相关型号:

TLP3115

MEASUREMENT INSTRUMENTS LOGIC IC TESTERS/MEMORY TESTERS BOARD TESTERS/SCANNERS
TOSHIBA

TLP3115(F)

PHOTORELAY MOSFET 300MA 4-SOP
TOSHIBA

TLP3115(TP,F)

Relay SSR 50mA 1.3V DC-IN 0.3A 40V 4-Pin SOP T/R
TOSHIBA

TLP3116

MEASUREMENT INSTRUMENTS LOGIC IC TESTERS/MEMORY TESTERS BOARD TESTERS/SCANNERS
TOSHIBA

TLP3116(F)

暂无描述
TOSHIBA

TLP3116(TP)

暂无描述
TOSHIBA

TLP3116(TP,F)

Relay SSR 50mA 1.3V DC-IN 0.12A 40V 4-Pin SOP T/R
TOSHIBA

TLP3116A

Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, 11-5H1, MINIFLAT, SOP-4
TOSHIBA

TLP3118

Measurement Instruments
TOSHIBA

TLP3118(F)

PHOTORELAY MOSFET 40MA 4-SOP
TOSHIBA

TLP3118(TP)

暂无描述
TOSHIBA

TLP3118(TP,F)

Relay SSR 50mA 1.3V DC-IN 0.04A 80V 4-Pin SOP T/R
TOSHIBA