TLP206A_07 [TOSHIBA]
Measurement Instrument; 测量仪型号: | TLP206A_07 |
厂家: | TOSHIBA |
描述: | Measurement Instrument |
文件: | 总6页 (文件大小:176K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TLP206A
TOSHIBA Photocoupler GaAs IRED & Photo-MOSFET
TLP206A
Measurement Instrument
Unit: mm
Data Acquisition
Programmable Control
The TOSHIBA TLP206A consists of gallium arsenide infrared emitting
diode optically coupled to a photo-MOSFET in an 8-pin SOP.
The TLP206A is a 2-form-A switch which is suitable for replacement of
mechanical relays in many applications which require space savings.
•
•
•
•
•
•
•
SOP 8 pin (2.54SOP8): 2-form-A
Peak off-state voltage: 60 V (min)
Trigger LED current: 3 mA (max)
On-state current: 400 mA (max)
On-state resistance: 2 Ω (max)
Isolation voltage: 1500 Vrms (min)
UL recognized: UL1577, file No. E67349
Pin Configuration (top view)
JEDEC
⎯
⎯
JEITA
2-form A
TOSHIBA
Weight: 0.2 g (typ.)
1
2
3
4
8
7
6
5
8
1
7
2
6
3
5
4
1, 3: Anode
2, 4: Cathode
5:
6:
7:
8:
Drain 1
Drain 2
Drain 3
Drain 4
Internal Circuit
1, 3
6, 8
5, 7
2, 4
1
2007-10-01
TLP206A
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Forward current
Symbol
Rating
50
Unit
mA
I
F
Forward current derating
(Ta ≥ 25°C)
ΔI /°C
F
−0.5
mA/°C
LED
Pulse forward current
(100 μs pulse, 100 pps)
I
1
A
FP
Reverse voltage
V
5
V
°C
V
R
Junction temperature
Off-state output terminal voltage
On-state current
T
125
60
j
V
OFF
I
400
mA
ON
Detector
On-state RMS current derating
(Ta ≥ 25°C)
ΔI /°C
ON
−4.0
mA/°C
Junction temperature
T
125
−55 to 125
−40 to 85
260
°C
°C
°C
°C
j
Storage temperature range
T
stg
opr
Operating temperature range
T
Lead soldering temperature (10 s)
T
sol
BV
Isolation voltage (AC, 1 min., R.H. ≤ 60%)
1500
Vrms
S
(Note 2)
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Two channels operating simultaneously.
Note 2: Device considered a two-terminal device: pins 1, 2, 3 and 4 shorted together and pins 5, 6, 7 and 8 shorted
together.
Recommended Operating Conditions
Characteristics
Supply voltage
Symbol
Min
Typ.
Max
Unit
V
⎯
5
⎯
7.5
⎯
48
25
V
DD
Forward current
I
mA
mA
°C
F
On-state current
I
⎯
400
65
ON
Operating temperature
T
opr
−20
⎯
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2007-10-01
TLP206A
Individual Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Forward voltage
Reverse current
Capacitance
V
I
= 10 mA
F
1.0
⎯
⎯
⎯
⎯
1.15
⎯
1.3
10
⎯
1
V
F
LED
I
V
= 5 V
R
μA
pF
μA
pF
R
C
V = 0, f = 1 MHz
= 60 V
30
T
Off-state current
Capacitance
I
V
⎯
OFF
OFF
Detector
C
V = 0, f = 1 MHz
140
⎯
OFF
Coupled Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
= 400 mA
Min
Typ.
Max
Unit
Trigger LED current
On-state resistance
I
I
I
⎯
⎯
1
1
3
2
mA
FT
ON
ON
R
ON
= 400 mA, I = 5 mA
Ω
F
Isolation Characteristics (Ta = 25°C)
Characteristics
Capacitance input to output
Isolation resistance
Symbol
Test Condition
= 0, f = 1 MHz
Min
Typ.
0.8
Max
⎯
Unit
pF
Ω
C
R
V
V
⎯
S
S
S
S
5 ×
= 500 V, R.H. ≤ 60%
1014
⎯
1010
AC, 1 minute
1500
⎯
⎯
⎯
⎯
⎯
Vrms
Vdc
Isolation voltage
BV
S
AC, 1 second (in oil)
DC, 1 minute (in oil)
3000
3000
⎯
Switching Characteristics (Ta = 25°C)
Characteristics
Turn-on time
Symbol
Test Condition
Min
⎯
Typ.
0.6
Max
2.0
Unit
ms
R
= 200 Ω
(Note)
(Note)
L
t
ON
V
= 20 V, I = 5 mA
DD
F
R
L
= 200 Ω
Turn-off time
t
⎯
0.1
1.0
ms
OFF
V
= 20 V, I = 5 mA
F
DD
Note: Switching time test circuit
I
V
V
F
DD
I
F
1, 3
2, 4
6, 8
R
L
OUT
5, 7
90%
V
OUT
10%
t
t
OFF
ON
3
2007-10-01
TLP206A
4
2007-10-01
TLP206A
5
2007-10-01
TLP206A
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety
in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such
TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No responsibility
is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from
its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third
parties.
• Product names mentioned herein may be trademarks of their respective companies.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut,
crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
6
2007-10-01
相关型号:
TLP2095(TPL,F)
Optocoupler - IC Output, 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, ROHS COMPLIANT, 11-4C2, MINIFLAT, MFSOP-5/6
TOSHIBA
©2020 ICPDF网 联系我们和版权申明