TCR2EE28 [TOSHIBA]
200 mA CMOS Low Drop-Out Regulator with Fast Load Transient Response;
| 型号： | TCR2EE28 |
| 厂家： | 
TOSHIBA |
| 描述： | 200 mA CMOS Low Drop-Out Regulator with Fast Load Transient Response |
| 文件： | 总16页 (文件大小：1151K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TCR2EF series, TCR2EE series
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic
TCR2EF series
TCR2EE series
200 mA CMOS Low Drop-Out Regulator with Fast Load Transient Response
The TCR2EF and TCR2EF series are CMOS single-output voltage
regulators with an on/off control input, featuring low dropout voltage,
low output noise voltage and fast load transient response.
These voltage regulators are available in fixed output voltages
between 1.0 V and 5.0 V and capable of driving up to 200 mA. They
feature overcurrent protection, an Auto-discharge function.
The TCR2EF and TCR2EE series has a low dropout voltage of
180 mV ( 2.5 V output, IOUT = 150 mA) with low output noise voltage
of 35 μVrms (2.5 V output) and a load transient response of only ⊿
SMV
V
OUT = ±60 mV ( IOUT = 1 mA⇔150 mA, COUT =1.0 μF).
Thus, the TCR2EF and TCR2EE series are suitable for sensitive
power supply such as Analog and RF applications.
ESV
Features
Weight :
SMV (SOT-25)(SC-74A) : 16 mg ( typ.)
ESV (SOT-553) : 3.0 mg ( typ.)
•
Low Drop-Out voltage
VIN-VOUT = 150 mV (typ.) at 3.0 V-output, IOUT = 150 mA
VIN-VOUT = 180 mV (typ.) at 2.5 V-output, IOUT = 150 mA
VIN-VOUT = 230 mV (typ.) at 1.8 V-output, IOUT = 150 mA
VIN-VOUT = 380 mV (typ.) at 1.2 V-output, IOUT = 150 mA
VIN-VOUT = 510 mV (typ.) at 1.0 V-output, IOUT = 150 mA
•
•
•
•
•
•
•
•
•
•
•
Low output noise voltage ( VNO = 35 μVrms (typ.) at 2.5 V-output, IOUT = 10 mA, 10 Hz < f < 100 kHz )
Fast load transient response (⊿VOUT = ±60 mV (typ.) at IOUT = 1 mA ⇔ 150 mA, COUT =1.0 μF )
Low quiescent bias current ( IB = 35 μA (typ.) at IOUT = 0 mA )
High ripple rejection ( R.R = 73 dB (typ.) at 2.5V-output, IOUT = 10 mA, f =1kHz )
Wide range Output Voltage line up ( VOUT = 1.0 to 5.0 V )
<
High VOUT accuracy ±1.0% ( 1.8V
Overcurrent protection
VOUT )
Auto-discharge
Pull down connection between CONTROL and GND
Ceramic capacitors can be used ( CIN = 0.1μF, COUT =1.0 μF )
Small package ESV(SOT-553) (1.6 mm x 1.6 mm x 0.55 mm )
General package SMV(SOT-25) (2.8 mm x 2.9 mm x 1.1 mm )
1
2012-12-11
TCR2EF series, TCR2EE series
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Input voltage
Symbol
Rating
Unit
V
6.0
V
V
IN
Control voltage
Output voltage
Output current
V
-0.3 to 6.0
CT
V
-0.3 to V + 0.3
IN
V
OUT
OUT
I
200
200
mA
(Note1)
SMV
ESV
580
150
320
(Note 2)
(Note 1)
(Note 3)
Power dissipation
P
mW
D
Operation temperature range
Junction temperature
T
−40 to 85
150
°C
°C
°C
opr
T
j
Storage temperature range
T
−55 to 150
stg
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Unit Rating
Note 2: Rating at mounting on a board
(FR4 board: 25.4 mm × 25.4 mm × 1.6 mm)
Note 3: Rating at mounting on a board
(FR4 board dimension: 30 mm × 30 mm × 0.8 mm)
Pin Assignment (top view)
SMV(SOT-25)(SC-74A)
ESV(SOT-553)
V
NC
OUT
5
V
NC
5
OUT
4
4
2
1
3
3
1
2
V
GND
CONTROL
IN
V
IN
GND
CONTROL
2
2012-12-11
TCR2EF series, TCR2EE series
List of Products Number, Output voltage and Marking
Product No.
SMV(SOT-25)
Product No.
SMV(SOT-25)
V
V
OUT
(V)(typ.)
OUT
Marking
Marking
(V)(typ.)
ESV(SOT-553)
TCR2EE10
TCR2EE105*
TCR2EE11
TCR2EE115
TCR2EE12
TCR2EE125*
TCR2EE13
TCR2EE135
TCR2EE14*
TCR2EE15
TCR2EE16*
TCR2EE17*
TCR2EE18
TCR2EE19*
TCR2EE20*
TCR2EE21*
TCR2EE22*
TCR2EE23*
ESV(SOT-553)
TCR2EE24*
TCR2EE25
TCR2EE26*
TCR2EE27*
TCR2EE28
TCR2EE285*
TCR2EE29*
TCR2EE295*
TCR2EE30
TCR2EE31*
TCR2EE32*
TCR2EE33
TCR2EE34*
TCR2EE35*
TCR2EE36*
TCR2EE41*
TCR2EE45
TCR2EE50
TCR2EF10
TCR2EF105*
TCR2EF11
TCR2EF115*
TCR2EF12
TCR2EF125*
TCR2EF13
TCR2EF135*
TCR2EF14*
TCR2EF15
TCR2EF16*
TCR2EF17*
TCR2EF18
TCR2EF19*
TCR2EF20*
TCR2EF21*
TCR2EF22*
TCR2EF23*
1.0
1.05
1.1
TCR2EF24*
TCR2EF25
TCR2EF26*
TCR2EF27*
TCR2EF28
TCR2EF285*
TCR2EF29*
TCR2EF295*
TCR2EF30
TCR2EF31
TCR2EF32*
TCR2EF33
TCR2EF34*
TCR2EF35*
TCR2EF36*
TCR2EF41
TCR2EF45
TCR2EF50
2.4
2.5
2.6
2.7
2.8
2.85
2.9
2.95
3.0
3.1
3.2
3.3
3.4
3.5
3.6
4.1
4.5
5.0
2N4
2N5
2N6
2N7
2N8
2ND
2N9
2NE
3N0
3N1
3N2
3N3
3N4
3N5
3N6
4N1
4N5
5N0
1N0
1NA
1N1
1NB
1N2
1NC
1N3
1ND
1N4
1N5
1N6
1N7
1N8
1N9
2N0
2N1
2N2
2N3
1.15
1.2
1.25
1.3
1.35
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
Please contact your local Toshiba representative if you are interested in products with * sign
Marking (top view)
Example: TCR2EF33 (3.3 V output)
Example: TCR2EE33 (3.3 V output)
3 N 3
3 N 3
3
2012-12-11
TCR2EF series, TCR2EE series
Electrical Characteristics
(Unless otherwise specified,
V
IN
= V
+ 1 V, I
= 50 mA, C = 0.1 μF, C
= 1.0 μF, T = 25°C)
OUT
OUT
IN
OUT
j
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
V
<1.8 V
-18
-1.0
1.5
⎯
⎯
⎯
+18
+1.0
5.5
mV
%
OUT
Output voltage accuracy
V
I
I
= 50 mA (Note 4)
= 1 mA
OUT
OUT
OUT
<
1.8V
V
OUT
Input voltage
V
V
IN
<
<
V
+ 0.5 V
V
5.5 V,
OUT
= 1 mA
IN
Line regulation
Reg･line
⎯
1
15
mV
I
OUT
<
Load regulation
Reg･load 1 mA
I
150 mA
⎯
⎯
⎯
⎯
⎯
15
35
30
60
mV
μA
OUT
Quiescent current
Stand-by current
Drop-out voltage
Temperature coefficient
I
I
= 0 mA
= 0 V
CT
B
OUT
I
V
0.1
180
100
1.0
230
⎯
μA
B (OFF)
V
-V
I
= 150 mA (Note 5)
mV
IN OUT OUT
<
<
opr
T
CVO
−40°C
T
85°C
+ 1 V, I
ppm/°C
V
= V
= 10 mA,
IN
10 Hz
OUT
OUT
<
100 kHz, Ta = 25°C (Note 5)
Output noise voltage
Ripple rejection ratio
V
⎯
⎯
35
73
⎯
⎯
μV
rms
NO
<
f
V
= V
+ 1 V, I
= 10 mA,
IN
OUT
Ripple
Ta = 25°C (Note 5)
OUT
R.R.
⊿V
f = 1 kHz, V
= 500 mV
,
dB
p-p
= 1 mA⇔150mA, C = 1.0 μF
OUT
Load transient response
Control voltage (ON)
Control voltage (OFF)
I
⎯
1.0
0
±60
⎯
⎯
mV
V
OUT
OUT
V
⎯
⎯
5.5
0.4
CT (ON)
V
⎯
V
CT (OFF)
Note 4: Stable state with fixed IOUT condition
Note 5: The 2.5 V output product
Note 6: All charaterisitcs of over 4.5V output products are measured at VIN = VOUT + 0.5 V conditions.
Drop-out voltage
(IOUT = 150 mA, CIN = 0.1 μF, COUT = 1.0 μF, Tj = 25°C)
Output voltages
1.0 V, 1.05 V
Symbol
Min
Typ.
Max
Unit
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
510
440
380
350
310
290
230
180
150
770
670
570
470
420
390
310
230
200
1.1 V, 1.15 V
1.2 V, 1.25 V
1.3 V
V
-V
IN OUT
mV
1.4 V
<
1.5 V
1.8 V
2.5 V
3.0 V
V
V
V
V
< 1.8 V
< 2.5 V
< 3.0 V
OUT
OUT
OUT
OUT
<
<
<
<
5.0 V
4
2012-12-11
TCR2EF series, TCR2EE series
Application Note
1. Recommended Application Circuit
●ESV
●SMV
V
OUT
V
OUT
NC
NC
CONTROL pin
connection
Operation
HIGH
LOW
ON
OFF
OFF
OPEN
V
GND
CONTROL
IN
V
GND CONTROL
IN
The figure above shows the recommended configuration for using a Low-Dropout regulator. Insert a capacitor at
and V pins for stable input/output operation. (Ceramic capacitors can be used).
V
OUT
IN
2. Power Dissipation
Both unit and board-mounted power dissipation ratings for TCR2EF series and TCR2EE series are available in
the Absolute Maximum Ratings table.
Power dissipation is measured on the board shown below.
Testing Board of Thermal Resistance
SMV
ESV
*Board material: FR4 board
*Board material: FR4
Board dimension: 25.4 mm × 25.4 mm × 1.6 mm
Board dimension: 30 mm × 30 mm × 0.8 mm
2
2
Copper area: 645 mm
Copper area: 20 mm
PD – Ta (SMV)
PD – Ta (ESV)
800
600
400
400
300
200
100
0
①
Board dimension 25.4 mm x 25.4 mm, x
1.6 mm Copper area 645 mm2,
mounted on FR4 Board
①
②
Unit Rating
①
②
②
200
① Board dimension 30 mm x 30 mm,
x 0.8 mm Copper area 20 mm2,
mounted on Glass Epoxy Board
② Unit Rating
0
0
120
−40
0
40
80
120
−40
40
80
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
5
2012-12-11
TCR2EF series, TCR2EE series
Attention in Use
●
●
●
●
Output Capacitors
Ceramic capacitors can be used for these devices. However, because of the type of the capacitors, there might be
unexpected thermal features. Please consider application condition for selecting capacitors. And Toshiba
recommend the ESR of ceramic capacitor is under 10 Ω.
Mounting
The long distance between IC and output capacitor might affect phase assurance by impedance in wire and inductor.
For stable power supply, output capacitor need to mount near IC as much as possible. Also VIN and GND pattern
need to be large and make the wire impedance small as possible.
Permissible Loss
Please have enough design patterns for expected maximum permissible loss. And under consideration of
surrounding temperature, input voltage, and output current etc, we recommend proper dissipation ratings for
maximum permissible loss; in general maximum dissipation rating is 70 to 80 percent.
Overcurrent Protection Circuit
Overcurrent protection circuit is designed in these products, but this does not assure for the suppression of uprising
device operation. If output pins and GND pins are shorted out, these products might be break down.
In use of these products, please read through and understand dissipation idea for absolute maximum ratings from
the above mention or our ‘Semiconductor Reliability Handbook’. Then use these products under absolute maximum
ratings in any condition. Furthermore, Toshiba recommend inserting failsafe system into the design.
6
2012-12-11
TCR2EF series, TCR2EE series
Representative Typical Characteristics
1) Output Voltage vs. Input Voltage
VOUT=1.8V
VOUT=1.2V
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
IOUT = 1mA
IOUT = 1mA
IOUT = 50mA
IOUT = 50mA
IOUT = 150mA
IOUT = 150mA
Input voltage VIN (V)
VOUT=2.5V
Input voltage VIN (V)
VOUT=3.0V
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
IOUT = 1mA
IOUT = 1mA
IOUT = 50mA
IOUT = 50mA
IOUT = 150mA
IOUT = 150mA
Input voltage VIN (V)
2) Output Voltage vs. Output Current
VOUT=1.2V
Input voltage VIN (V)
VOUT=1.8V
VIN = 2.8 V,
VIN = 2.2 V,
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
Output current IOUT (mA)
Output current IOUT (mA)
7
2012-12-11
TCR2EF series, TCR2EE series
VOUT=2.5V
VOUT=3.0V
VIN = 4.0 V,
VIN = 3.5 V,
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
Output current IOUT (mA)
Output current IOUT (mA)
3) Output Voltage vs. Ambient Temperature
VOUT=1.2V
VOUT=1.8V
VIN = 2.8 V,
VIN = 2.2 V,
CIN = 0.1 μF, COUT = 1 μF
IOUT = 50mA
CIN = 0.1 μF, COUT = 1 μF
IOUT = 50mA
Ambient temperature Ta (℃)
Ambient temperature Ta (℃)
VOUT=2.5V
VOUT=3.0V
VIN = 4.0 V,
VIN = 3.5 V,
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
I
OUT = 50mA
IOUT = 50mA
Ambient temperature Ta (℃)
Ambient temperature Ta (℃)
8
2012-12-11
TCR2EF series, TCR2EE series
4) Dropout Voltage vs. Output Current
VOUT=1.8V
VOUT=1.2V
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
Output current IOUT (mA)
Output current IOUT (mA)
VOUT=3.0V
VOUT=2.5V
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
Output current IOUT (mA)
Output current IOUT (mA)
5) Quiescent Current vs. Input Voltage
VOUT=1.2V
VOUT=1.8V
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
IOUT = 0mA
Input voltage VIN (V)
Input voltage VIN (V)
9
2012-12-11
TCR2EF series, TCR2EE series
VOUT=2.5V
VOUT=3.0V
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
IOUT = 0mA
Input voltage VIN (V)
Input voltage VIN (V)
VOUT=1.8V
6) Quiescent Current vs. Ambient Temperature
VOUT=1.2V
VIN = 2.8V
VIN = 2.2 V
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
Ambient temperature Ta (℃)
Ambient temperature Ta (℃)
VOUT=3.0V
VOUT=2.5V
VIN = 3.5 V
VIN = 4.0V
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
CIN = 0.1 μF, COUT = 1 μF
IOUT = 0mA
Ambient temperature Ta (℃)
Ambient temperature Ta (℃)
10
2012-12-11
TCR2EF series, TCR2EE series
7) Output Voltage vs. Output Current
VOUT=1.2V
VOUT=1.8V
Pulse width = 1 ms
Pulse width = 1 ms
VIN = 5.5V
VIN = 5.5V
VIN = 2.8V
VIN = 2.2V
Output current IOUT (mA)
Output current IOUT (mA)
VOUT=3.0V
VOUT=2.5V
Pulse width = 1 ms
Pulse width = 1 ms
VIN = 5.5V
VIN = 5.5V
VIN = 3.5V
VIN = 4.0V
Output current IOUT (mA)
Output current IOUT (mA)
8) Ripple Rejection Ratio vs. Frequency
VOUT=1.2V
VOUT=3.0V
VIN = 4.0 V ,Vripple = 500 mVp−p
CIN = none, COUT = 1μF
IOUT = 10 mA, Ta = 25°C
VIN = 2.2 V ,Vripple = 500 mVp−p
CIN = none, COUT = 1μF
IOUT = 10 mA, Ta = 25°C
Frequency f (Hz)
Frequency f (Hz)
11
2012-12-11
TCR2EF series, TCR2EE series
9) Control Transient Response
VOUT=1.2V
VOUT=1.8V
VIN = 2.8 V,
VIN = 2.2 V,
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
2.0
1.0
2.0
1.0
0
0
IOUT = 1mA
2.0
1.0
IOUT = 1mA
2.0
1.0
IOUT = 50mA
IOUT = 150mA
IOUT = 50mA
IOUT = 150mA
0
0
Time t (25 μs/div)
Time t (25 μs/div)
VOUT=3.0V
VOUT=2.5V
VIN = 4.0 V,
CIN = 0.1 μF, COUT = 1 μF
2.0
1.0
2.0
0
1.0
0
IOUT = 1mA
3.0
2.0
1.0
IOUT = 1mA
3.0
2.0
IOUT = 50mA
IOUT = 50mA
1.0
0
0
IOUT = 150mA
IOUT = 150mA
Time t (25 μs/div)
Time t (25 μs/div)
12
2012-12-11
TCR2EF series, TCR2EE series
10) Control Transient Response
VOUT=1.2V
VOUT=1.8V
(IOUT = 1mA ⇔ 150mA)
(IOUT = 1mA ⇔ 150mA)
VIN = 2.8 V,
CIN = 0.1 μF, COUT = 1 μF
VIN = 2.2 V,
IN = 0.1 μF, COUT = 1 μF
C
400
400
200
200
0
0
1.3
1.2
1.1
1.9
1.8
1.7
Time t (25 μs/div)
Time t (25 μs/div)
VOUT=2.5V
VOUT=3.0V
(IOUT = 1mA ⇔ 150mA)
(IOUT = 1mA ⇔ 150mA)
VIN = 4.0 V,
VIN = 3.5 V,
CIN = 0.1 μF, COUT = 1 μF
CIN = 0.1 μF, COUT = 1 μF
400
200
0
400
200
0
3.1
3.0
2.9
2.6
2.5
2.4
Time t (25 μs/div)
Time t (25 μs/div)
13
2012-12-11
TCR2EF series, TCR2EE series
Package Dimensions
SMV (SOT-25)(SC-74A)
Unit: mm
Weight : 16 mg (typ.)
14
2012-12-11
TCR2EF series, TCR2EE series
Package Dimensions
ESV (SOT-553)
Unit: mm
Weight: 3.0 mg (typ.)
15
2012-12-11
TCR2EF series, TCR2EE series
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
16
2012-12-11
相关型号：
©2020 ICPDF网 联系我们和版权申明