TC7WGU04FC(TE85L) [TOSHIBA]

IC,LOGIC GATE,TRIPLE INVERTER,CMOS,LLCC,8PIN,PLASTIC;
TC7WGU04FC(TE85L)
型号: TC7WGU04FC(TE85L)
厂家: TOSHIBA    TOSHIBA
描述:

IC,LOGIC GATE,TRIPLE INVERTER,CMOS,LLCC,8PIN,PLASTIC

栅 光电二极管 逻辑集成电路 触发器
文件: 总6页 (文件大小:172K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TC7WGU04FC  
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic  
TC7WGU04FC  
Triple Inverter (Un-Buffer)  
Features  
TC7WGU04FC  
High-level output current: ±8 mA (min)  
at V = 3 V  
CC  
High-speed operation: t = 1.9 ns (typ.)  
pd  
at V  
= 3.3 V,15pF  
CC  
Operating voltage range: V  
3.6-V tolerant inputs  
= 0.9 to 3.6 V  
CC  
Weight: 0.002 g (typ.)  
Absolute Maximum Ratings (Ta = 25°C)  
Marking  
Product name  
Characteristics  
Symbol  
Rating  
Unit  
GU04  
Power supply voltage  
DC input voltage  
V
0.5 to 4.6  
0.5 to 4.6  
V
CC  
V
V
IN  
DC output voltage  
Input diode current  
Output diode current  
DC output current  
V
0.5 to V  
+ 0.5  
V
OUT  
CC  
I
20  
mA  
(Note 1) mA  
mA  
IK  
I
20  
±25  
Pin Assignment (top view)  
OK  
I
OUT  
VCC 1Y  
3A  
6
2Y  
5
DC V /GND current  
CC  
I
±50  
mA  
CC  
8
7
Power dissipation  
P
150  
(Note 2) mW  
°C  
D
Storage temperature  
T
stg  
65 to 150  
Note: Using continuously under heavy loads (e.g. the application of  
high temperature/current/voltage and the significant change in  
temperature, etc.) may cause this product to decrease in the  
reliability significantly even if the operating conditions (i.e.  
operating temperature/current/voltage, etc.) are within the  
absolute maximum ratings and the operating ranges.  
Please design the appropriate reliability upon reviewing the  
Toshiba Semiconductor Reliability Handbook (“Handling  
Precautions”/Derating Concept and Methods) and individual  
reliability data (i.e. reliability test report and estimated failure  
rate, etc).  
1
1A  
2
3Y  
3
4
2A GND  
Note 1: V  
< GND, V > V  
OUT CC  
OUT  
Note 2: Mounted on an FR4 board.  
2
(25.4 mm × 25.4 mm × 1.6 t, Cu Pad: 11.56 mm )  
1
2009-09-18  
TC7WGU04FC  
Truth Table  
IEC Logic Symbol  
A
Y
1
1A  
1Y  
2Y  
3Y  
L
H
L
2A  
3A  
H
Operating Ranges  
Characteristics  
Symbol  
Rating  
Unit  
Power supply voltage  
Input voltage  
V
0.9 to 3.6  
0 to 3.6  
V
V
V
CC  
V
IN  
Output voltage  
V
0 to V  
±8.0  
±4.0  
±3.0  
±1.7  
±0.3  
±0.02  
OUT  
CC  
(Note 3)  
(Note 4)  
(Note 5)  
(Note 6)  
(Note 7)  
(Note 8)  
Output Current  
I
/I  
OH OL  
mA  
°C  
Operating temperature  
T
opr  
40 to 85  
Note 3:  
Note 4:  
Note 5:  
Note 6:  
Note 7:  
Note 8:  
V
CC  
V
CC  
V
CC  
V
CC  
V
CC  
V
CC  
= 3.0 to 3.6 V  
= 2.3 to 2.7 V  
= 1.65 to 1.95 V  
= 1.4 to 1.6 V  
= 1.1 to 1.3 V  
= 0.9 V  
2
2009-09-18  
TC7WGU04FC  
Electrical Characteristics  
DC Electrical Characteristics  
Ta = 25°C  
Typ.  
Ta = −40 to 85°C  
Characteristics  
Symbol  
Test Condition  
Unit  
V
(V)  
Min  
Max  
Min  
Max  
CC  
0.9  
V
V
CC  
CC  
V
× 0.8  
V
× 0.8  
CC  
CC  
1.1 to 1.3  
1.4 to 1.6  
V
× 0.8  
V
CC  
× 0.8  
CC  
High-level input  
voltage  
V
V
IH  
1.65 to  
1.95  
V
× 0.8  
V
× 0.8  
CC  
CC  
V
CC  
× 0.8  
V
CC  
× 0.8  
2.3 to 2.7  
V
× 0.8  
V
CC  
× 0.8  
CC  
3.0 to 3.6  
0.9  
GND  
GND  
V
CC  
× 0.2  
V
CC  
× 0.2  
1.1 to 1.3  
V
CC  
× 0.2  
V
CC  
× 0.2  
1.4 to 1.6  
Low-level  
V
V
IL  
1.65 to  
1.95  
V
CC  
× 0.2  
V
CC  
× 0.2  
input voltage  
V
CC  
× 0.2  
V
CC  
× 0.2  
2.3 to 2.7  
V
× 0.2  
V
CC  
× 0.2  
CC  
3.0 to 3.6  
0.9  
V
V
V
V
= V  
I
I
=−0.02 mA  
0.75  
0.75  
IN  
IN  
IN  
IN  
IL  
OH  
V
V
CC  
× 0.75  
CC  
× 0.75  
= −0.3 mA 1.1 to 1.3  
= −1.7 mA 1.4 to 1.6  
OH  
V
V
CC  
× 0.75  
CC  
× 0.75  
High-level  
I
I
OH  
OH  
V
V
OH  
output voltage  
=GND  
1.65 to  
= −3.0 mA  
V
V
CC  
-0.45  
CC  
1.95  
-0.45  
I
I
I
= −4.0 mA 2.3 to 2.7  
= −8.0 mA 3.0 to 3.6  
2.0  
2.0  
OH  
OH  
OL  
2.48  
2.48  
= V  
= 0.02 mA  
= 0.3 mA  
0.9  
0.1  
0.1  
IH  
V
V
CC  
× 0.25  
CC  
× 0.25  
I
I
I
1.1 to 1.3  
OL  
OL  
OL  
V
V
CC  
× 0.25  
CC  
Low-level  
= 1.7 mA  
= 3.0 mA  
1.4 to 1.6  
× 0.25  
V
V
OL  
output voltage  
= V  
CC  
1.65 to  
1.95  
0.45  
0.45  
I
I
= 4.0 mA  
= 8.0 mA  
2.3 to 2.7  
3.0 to 3.6  
0.4  
0.4  
0.4  
0.4  
OL  
OL  
Input leakage  
current  
I
V
V
= 0 to 3.6 V  
0 to 3.6  
3.6  
±0.1  
±1.0  
μA  
IN  
IN  
IN  
Quiescent  
supply current  
I
= V  
or GND  
CC  
1.0  
10.0  
μΑ  
CC  
3
2009-09-18  
TC7WGU04FC  
AC Electrical Characteristics (Unless otherwise specified, input t = t = 3 ns)  
r
f
Ta = 25°C  
Typ.  
Ta = −40 to 85°C  
Symbol  
Characteristics  
Test Condition  
Unit  
V
(V)  
Min  
Max  
Min  
Max  
CC  
0.9  
15.0  
1.1 to 1.3  
1.4 to 1.6  
6.0  
18.4  
8.5  
1.0  
1.0  
34.2  
10.0  
3.2  
C
L
R
L
= 10 pF,  
= 1 MΩ  
1.65 to  
1.95  
2.6  
6.2  
1.0  
6.7  
2.3 to 2.7  
3.0 to 3.6  
0.9  
2.0  
1.7  
3.9  
3.1  
1.0  
1.0  
4.4  
3.7  
18.8  
7.0  
1.1 to 1.3  
1.4 to 1.6  
21.5  
9.3  
1.0  
1.0  
37.2  
11.2  
3.5  
t
t
pLH  
C
L
R
L
= 15 pF,  
= 1 MΩ  
Propagation delay time  
ns  
1.65 to  
1.95  
3.0  
6.9  
1.0  
7.1  
pHL  
2.3 to 2.7  
3.0 to 3.6  
0.9  
2.3  
1.9  
4.4  
3.4  
1.0  
1.0  
5.0  
3.9  
33.0  
12.0  
6.0  
1.1 to 1.3  
1.4 to 1.6  
30.4  
13.1  
1.0  
1.0  
58.0  
15.9  
C
L
R
L
= 30 pF,  
= 1 MΩ  
1.65 to  
1.95  
4.5  
9.2  
1.0  
9.6  
2.3 to 2.7  
3.0 to 3.6  
3.6  
3.2  
2.5  
3
5.7  
4.4  
1.0  
1.0  
6.1  
4.8  
Input capacitance  
C
pF  
pF  
IN  
Power dissipation capacitance  
C
(Note 9) 0.9 to 3.6  
10  
PD  
Note 9: C  
is defined as the value of the internal equivalent capacitance which is calculated from the operating  
PD  
current consumption without load.  
Average operating current can be obtained by the equation:  
I
= C V f + I /3  
PD CC IN CC  
CC (opr.)  
4
2009-09-18  
TC7WGU04FC  
Package Dimensions  
Weight: 0.002 g (typ.)  
5
2009-09-18  
TC7WGU04FC  
RESTRICTIONS ON PRODUCT USE  
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively “Product”) without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must  
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,  
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA  
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are  
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the  
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any  
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other  
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO  
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.  
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring  
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.  
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or  
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious  
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used  
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling  
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric  
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this  
document.  
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product  
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of  
noncompliance with applicable laws and regulations.  
6
2009-09-18  

相关型号:

TC7WGU04FK

CMOS Digital Integrated Circuit Silicon Monolithic Triple Inverter (Un-Buffer)
TOSHIBA

TC7WGU04FK(TE85L,F)

IC,LOGIC GATE,TRIPLE INVERTER,CMOS,TSSOP,8PIN,PLASTIC
TOSHIBA

TC7WGU04FU

CMOS Digital Integrated Circuit Silicon Monolithic Triple Inverter (Un-Buffer)
TOSHIBA

TC7WGU04FU(TE12L)

TC7WGU04FU(TE12L)
TOSHIBA

TC7WGU04FU(TE12L,F)

IC,LOGIC GATE,TRIPLE INVERTER,CMOS,TSSOP,8PIN,PLASTIC
TOSHIBA

TC7WH00FC

CMOS Digital Integrated Circuit Silicon Monolithic Dual 2-Input NAND Gate
TOSHIBA

TC7WH00FC(TE85L)

IC,LOGIC GATE,DUAL 2-INPUT NAND,CMOS,LLCC,8PIN,PLASTIC
TOSHIBA

TC7WH00FK

DUAL 2-INPUT NAND GATE
TOSHIBA

TC7WH00FK(TE85L,F)

IC,LOGIC GATE,DUAL 2-INPUT NAND,CMOS,TSSOP,8PIN,PLASTIC
TOSHIBA

TC7WH00FKTE85L

IC HC/UH SERIES, DUAL 2-INPUT NAND GATE, PDSO8, SSOP-8, Gate
TOSHIBA

TC7WH00FK_09

Dual 2-Input NAND Gate
TOSHIBA

TC7WH00FU

DUAL 2-INPUT NAND GATE
TOSHIBA