TC7SG86FE(TPL3,F) [TOSHIBA]
IC,LOGIC GATE,2-INPUT XOR,CMOS,FP,6PIN,PLASTIC;型号: | TC7SG86FE(TPL3,F) |
厂家: | TOSHIBA |
描述: | IC,LOGIC GATE,2-INPUT XOR,CMOS,FP,6PIN,PLASTIC 栅 输入元件 光电二极管 逻辑集成电路 石英晶振 触发器 |
文件: | 总6页 (文件大小:155K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TC7SG86FE
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC7SG86FE
2-Input EXCLUSIVE OR Gate
Features
High output current
: ±8 mA (min) at VCC = 3 V
Super high speed operation : t = 2.6 ns (typ.)
pd
at VCC = 3.3 V, 15pF
Operating voltage range: VCC = 0.9 to 3.6 V
5.5-V tolerant inputs.
3.6-V power down protection output.
(ESV)
Weight: 3.0 mg (typ.)
Marking
Product name
W 8
Absolute Maximum Ratings (Ta 25°C)
Pin Assignment (top view)
Characteristic
Supply voltage
Symbol
Rating
Unit
IN B
IN A
GND
1
2
3
5
V
CC
V
−0.5 to 4.6
V
V
CC
DC input voltage
V
−0.5 to 7.0
IN
−0.5 to 4.6 (Note 1)
DC output voltage
V
V
OUT
−0.5 to V
+ 0.5 (Note 2)
CC
4
OUT Y
Input diode current
Output diode current
DC output current
I
−20
mA
IK
I
−20
±25
±50
150
(Note 3) mA
OK
I
mA
mA
mW
°C
OUT
DC V /ground current
CC
I
CC
Power dissipation
P
D
Storage temperature
T
stg
−65 to 150
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VCC = 0V
Note 2: High or Low state. Do not exceed IOUT of absolute maximum ratings.
Note 3: VOUT < GND
1
2009-07-09
TC7SG86FE
IEC Logic Symbol
Truth Table
A
B
Y
IN A
L
L
L
H
L
L
H
H
L
OUT Y
=1
IN B
H
H
H
Operating Ranges
Characteristic
Symbol
Rating
Unit
Supply voltage
Input voltage
V
0.9 to 3.6
0 to 5.5
V
V
CC
V
IN
0 to 3.6
(Note 4)
(Note 5)
(Note 6)
(Note 7)
(Note 8)
(Note 9)
(Note 10)
(Note 11)
Output voltage
Output current
V
V
OUT
0 to V
CC
8.0
4.0
3.0
I
/I
mA
OH OL
1.7
0.3
0.02
40 to 85
Operating temperature
Input rise and fall time
T
°C
opr
dt/dv
0 to 10 (Note 12)
ns/V
Note 4: VCC 0V
Note 5: High or Low state.
Note 6: VCC 3.0 to 3.6 V
Note 7: VCC 2.3 to 2.7 V
Note 8: VCC 1.65 to 1.95 V
Note 9: VCC 1.4 to 1.6 V
Note 10: VCC 1.1 to 1.3 V
Note 11: VCC 0.9 V
Note 12: VIN 0.8 to 2.0 V, VCC 3.0 V
2
2009-07-09
TC7SG86FE
Electrical Characteristics
DC Characteristics
Ta 25°C
Typ.
Ta 40 to 85°C
Characteristic
Symbol
Test Condition
Unit
V
(V)
Min
Max
Min
Max
CC
0.9
V
V
CC
CC
V
0.7
V
0.7
CC
CC
1.1 to 1.3
1.4 to 1.6
V
V
CC
0.65
CC
0.65
High-level
input voltage
V
V
IH
1.65 to
1.95
V
V
CC
0.65
CC
0.65
2.3 to 2.7
3.0 to 3.6
0.9
1.7
1.7
2.0
2.0
GND
GND
V
V
CC
0.3
CC
0.3
1.1 to 1.3
1.4 to 1.6
V
V
CC
0.35
CC
0.35
Low-level
input voltage
V
V
V
V
IL
1.65 to
1.95
V
V
CC
0.35
CC
0.35
2.3 to 2.7
3.0 to 3.6
0.9
0.7
0.7
0.8
0.8
I
I
0.02 mA
0.75
0.75
OH
OH
V
V
CC
0.75
CC
0.75
0.3 mA 1.1 to 1.3
1.7 mA 1.4 to 1.6
V
V
CC
0.75
CC
0.75
I
I
OH
OH
High-level
output voltage
V
V
IN
IH
or V
V
OH
IL
1.65 to
3.0 mA
V
V
CC
-0.45
CC
1.95
-0.45
I
I
I
4.0 mA 2.3 to 2.7
8.0 mA 3.0 to 3.6
2.0
0.1
2.0
0.1
OH
OH
OL
2.48
2.48
0.02 mA
0.3 mA
0.9
V
V
CC
0.25
CC
0.25
I
I
I
1.1 to 1.3
OL
OL
OL
V
V
CC
0.25
CC
1.7 mA
3.0 mA
1.4 to 1.6
Low-level
output voltage
V
V
V
IN
IH
or V
0.25
V
OL
IL
1.65 to
1.95
0.45
0.45
I
I
4.0 mA
8.0 mA
2.3 to 2.7
3.0 to 3.6
0 to 3.6
0.4
0.4
0.4
0.4
OL
OL
Input leakage current
I
0 to 5.5V
0 to 5.5V
0.1
1.0
A
A
IN
IN
Power off leakage
current
V
V
IN
I
0
1.0
1.0
10.0
10.0
OFF
0 to 3.6V
OUT
Quiescent supply
current
I
V
V or GND
CC
3.6
CC
IN
3
2009-07-09
TC7SG86FE
AC Characteristics (unless otherwise specified, Input: t t 3 ns)
r
f
Ta 25°C
Typ.
Ta 40 to 85°C
Symbol
Characteristics
Test Condition
Unit
V
(V)
Min
Max
Min
Max
CC
0.9
23.0
1.1 to 1.3
1.4 to 1.6
11.7
20.9
10.0
1.0
1.0
39.1
11.8
6.7
C
R
10 pF,
1 M
L
L
1.65 to
1.95
5.1
6.6
1.0
7.6
2.3 to 2.7
3.0 to 3.6
0.9
3.4
2.7
4.1
3.3
1.0
1.0
4.7
3.9
23.7
11.9
6.7
1.1 to 1.3
1.4 to 1.6
22.8
9.9
1.0
1.0
39.4
11.9
t
t
PLH
C
L
R
L
15 pF,
1 M
Propagation delay time
ns
1.65 to
1.95
PHL
5.1
7.3
1.0
7.5
2.3 to 2.7
3.0 to 3.6
0.9
3.4
2.7
4.7
3.6
1.0
1.0
5.3
4.1
32.1
15.7
8.7
1.1 to 1.3
1.4 to 1.6
31.4
13.9
1.0
1.0
59.4
16.9
C
L
R
L
30 pF,
1 M
1.65 to
1.95
6.5
9.8
1.0
10.2
2.3 to 2.7
3.0 to 3.6
3.6
4.2
3.4
3
6.0
4.7
1.0
1.0
6.5
5.1
Input capacitance
C
pF
pF
IN
Power dissipation capacitance
C
(Note 13) 0.9 to 3.6
9
PD
Note 13: C
is defined as the value of the internal equivalent capacitance which is calculated from the operating
PD
current consumption without load.
Average operating current can be obtained by the equation:
I
C ・V ・f I
PD CC IN CC
CC (opr.)
4
2009-07-09
TC7SG86FE
Package Dimensions
Weight: 3.0 mg (typ.)
5
2009-07-09
TC7SG86FE
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6
2009-07-09
相关型号:
©2020 ICPDF网 联系我们和版权申明