TC74VHCT04AF(EL,F) [TOSHIBA]
IC,LOGIC GATE,HEX INVERTER,AHCT/VHCT-CMOS,SOP,14PIN,PLASTIC;
| 型号： | TC74VHCT04AF(EL,F) |
| 厂家： | 
TOSHIBA |
| 描述： | IC,LOGIC GATE,HEX INVERTER,AHCT/VHCT-CMOS,SOP,14PIN,PLASTIC 栅极 触发器 逻辑集成电路 光电二极管 |
| 文件： | 总9页 (文件大小：252K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TC74VHCT04AF/AFN/AFT/AFK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VHCT04AF,TC74VHCT04AFN,TC74VHCT04AFT,TC74VHCT04AFK
Hex Inverter
Note: xxxFN (JEDEC SOP) is not available in
The TC74VHCT04A is an advanced high speed CMOS
INVERTER fabricated with silicon gate C2MOS technology.
Japan.
TC74VHCT04AF
TC74VHCT04AFN
TC74VHCT04AFT
TC74VHCT04AFK
It achieves the high speed operation similar to equivalent
Bipolar Schottky TTL while maintaining the CMOS low power
dissipation.
The input voltage are compatible with TTL output voltage.
This device may be used as a level converter for interfacing 3.3
V to 5 V system.
Input protection and output circuit ensure that 0 to 5.5 V can
be applied to the input and output (Note) pins without regard to
the supply voltage. These structure prevents device destruction
due to mismatched supply and input/output voltages such as
battery back up, hot board insertion, etc.
Note:
V
CC
= 0 V
Features
•
•
•
High speed: t = 4.7 ns (typ.) at V
= 5 V
pd
CC
Low power dissipation: I
= 2 μA (max) at Ta = 25°C
CC
Compatible with TTL outputs: V = 0.8 V (max)
IL
V
IH
= 2.0 V (min)
•
•
•
•
Power down protection is provided on all inputs and outputs.
∼
−
Balanced propagation delays: t
t
pHL
pLH
Low noise: V
= 1.0 V (max)
OLP
Pin and function compatible with the 74 series
(74AC/HC/F/ALS/LS etc.) 04 type.
Weight
SOP14-P-300-1.27A
SOL14-P-150-1.27
: 0.18 g (typ.)
: 0.12 g (typ.)
TSSOP14-P-0044-0.65A : 0.06 g (typ.)
VSSOP14-P-0030-0.50
: 0.02 g (typ.)
1
2007-10-01
TC74VHCT04AF/AFN/AFT/AFK
Pin Assignment
IEC Logic Symbol
(1)
(3)
(2)
(4)
1
1A
2A
3A
4A
5A
6A
1Y
2Y
3Y
4Y
5Y
6Y
1A
1Y
1
2
3
4
5
6
7
14
V
CC
13 6A
12 6Y
11 5A
10 5Y
(5)
(6)
(9)
(8)
2A
(11)
(13)
(10)
(12)
2Y
3A
3Y
9
8
4A
4Y
GND
(top view)
Truth Table
A
Y
L
H
L
H
Absolute Maximum Ratings (Note 1)
Characteristics
Supply voltage range
Symbol
Rating
Unit
V
−0.5 to 7.0
−0.5 to 7.0
−0.5 to 7.0
V
V
CC
DC input voltage
V
IN
(Note 2)
(Note 3)
DC output voltage
V
V
OUT
−0.5 to V
+ 0.5
CC
Input diode current
Output diode current
DC output current
I
−20
mA
mA
mA
mA
mW
°C
IK
I
±20
±25
(Note 4)
OK
I
OUT
DC V /ground current
CC
I
±50
CC
Power dissipation
P
180
D
Storage temperature
T
stg
−65 to 150
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2:
V
CC
= 0 V
Note 3: High or low state. I
absolute maximum rating must be observed.
OUT
Note 4:
V
OUT
< GND, V > V
OUT CC
2
2007-10-01
TC74VHCT04AF/AFN/AFT/AFK
Operating Ranges (Note 1)
Characteristics
Symbol
Rating
Unit
Supply voltage
Input voltage
V
4.5 to 5.5
0 to 5.5
0 to 5.5
V
V
CC
V
IN
(Note 2)
(Note 3)
Output voltage
V
V
OUT
0 to V
CC
Operating temperature
Input rise and fall time
T
−40 to 85
°C
opr
dt/dv
0 to 20
ns/V
Note 1: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 2:
V
CC
= 0 V
Note 3: High or low state.
Electrical Characteristics
DC Characteristics
Ta =
−40 to 85°C
Ta = 25°C
Typ.
Test Condition
Characteristics
Symbol
Unit
V
(V)
CC
Min
2.0
Max
Min
2.0
Max
High-level input
voltage
4.5 to
5.5
V
―
―
―
―
―
―
V
V
IH
Low-level input
voltage
4.5 to
5.5
V
―
0.8
―
0.8
IL
I
I
I
I
= −50 μA
= −8 mA
= 50 μA
= 8 mA
4.5
4.5
4.5
4.5
4.40
3.94
―
4.50
―
―
―
4.40
3.80
―
―
―
OH
OH
OL
OL
High-level output
voltage
V
V
V
= V
= V
V
V
OH
IN
IN
IL
0.0
―
0.1
0.36
0.1
0.44
Low-level output
voltage
V
OL
IH
―
―
Input leakage
current
0 to
5.5
I
V
V
= 5.5 V or GND
―
―
―
―
±0.1
2.0
―
―
±1.0
20.0
μA
μA
IN
IN
IN
I
= V
or GND
CC
5.5
CC
Quiescent supply
current
Per input: V = 3.4 V
IN
I
5.5
―
―
―
―
1.35
0.5
―
―
1.50
5.0
mA
CCT
OPD
Other input: V
or GND
CC
Output leakage
current
I
V
= 5.5 V
0
μA
OUT
3
2007-10-01
TC74VHCT04AF/AFN/AFT/AFK
AC Characteristics (input: t = t = 3 ns)
r
f
Ta =
−40 to 85°C
Test Condition
(V)
Ta = 25°C
Characteristics
Symbol
Unit
V
C (pF)
L
Min
―
Typ.
4.7
5.5
4
Max
6.7
7.7
10
Min
1.0
1.0
―
Max
7.5
8.5
10
CC
t
t
15
50
pLH
Propagation delay
time
―
5.0 ± 0.5
ns
―
pHL
Input capacitance
C
―
―
pF
pF
IN
Power dissipation
capacitance
C
PD
(Note)
―
11
―
―
―
Note:
C
PD
is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
I
= C ·V ·f + I /6 (per gate)
PD CC IN CC
CC (opr)
Noise Characteristics (input: t = t = 3 ns)
r
f
Test Condition
Ta = 25°C
Characteristics
Symbol
Unit
V
(V)
Typ.
Max
1.0
CC
Quiet output maximum dynamic V
V
V
C = 50 pF
5.0
0.8
−0.8
―
V
V
V
V
OL
OLP
OLV
L
Quiet output minimum dynamic V
C = 50 pF
L
5.0
5.0
5.0
−1.0
2.0
OL
Minimum high level dynamic input voltage
Maximum low level dynamic input voltage
V
C = 50 pF
L
IHD
V
C = 50 pF
L
―
0.8
ILD
4
2007-10-01
TC74VHCT04AF/AFN/AFT/AFK
Package Dimensions
Weight: 0.18 g (typ.)
5
2007-10-01
TC74VHCT04AF/AFN/AFT/AFK
Package Dimensions (Note)
Note:
This package is not available in Japan.
Weight: 0.12 g (typ.)
6
2007-10-01
TC74VHCT04AF/AFN/AFT/AFK
Package Dimensions
Weight: 0.06 g (typ.)
7
2007-10-01
TC74VHCT04AF/AFN/AFT/AFK
Package Dimensions
Weight: 0.02 g (typ.)
8
2007-10-01
TC74VHCT04AF/AFN/AFT/AFK
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
9
2007-10-01
相关型号：
TC74VHCT04AFT(EL)
IC AHCT/VHCT SERIES, HEX 1-INPUT INVERT GATE, PDSO14, 4.40 MM, 0.65 MM PITCH, EIAJ TYPE1, PLASTIC, TSSOP-14, Gate
TOSHIBA
©2020 ICPDF网 联系我们和版权申明