5FWJ2C48M_06 [TOSHIBA]

SWITCHING MODE POWER SUPPLY APPLICATON; 开关电源APPLICATON


型号：	5FWJ2C48M_06
厂家：	TOSHIBA
描述：	SWITCHING MODE POWER SUPPLY APPLICATON 开关电源APPLICATON 开关
文件：	总5页 (文件大小：284K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

5FWJ2C48M,U5FWJ2C48M

TOSHIBA SCHOTTKY BARRIER RECTIFIER STACK SCHOTTKY BARRIER TYPE

5FWJ2C48M, U5FWJ2C48M

SWITCHING MODE POWER SUPPLY APPLICATON

CONVERTER & CHOPPER APPLICATION

z Repetitive Peak Reverse Voltage

z Average Output Rectified Current

: V

= 30 V

RRM

: I = 5 A

z Low Switching Losses and Output Noise

Unit: mm

5FWJ2C48M

U5FWJ2C48M

JEDEC

JEITA

―

JEDEC

JEITA

―

TOSHIBA

12-10D1A

TOSHIBA

12-10D2A

POLARITY

ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)

CHARACTERISTIC

SYMBOL

RATING

UNIT

Repetitive Peak Reverse Voltage

Average Output Rectified Current

RRM

50 (50Hz)

55 (60Hz)

−40~125

−40~150

Peak One Cycle Surge Forward

Current (Sine Wave)

FSM

Junction Temperature

°C

Storage Temperature Range

stg

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report

and estimated failure rate, etc).

2006-11-10

5FWJ2C48M,U5FWJ2C48M

ELECTRICAL CHARACTERISTICS (Ta = 25°C)

CHARACTERISTIC

Peak Forward Voltage

SYMBOL

TEST CONDITION

TYP.

MAX.

0.47

UNIT

=2.5A

―

Repetitive Peak Reverse

Current

Rated

RRM=

―

3.5

RRM

Junction Capacitance

Thermal Resistance

V =10V, f=1.0MHz

138

―

Total DC , Junction to Case

―

3.0

°C / W

th (j-c)

, I

, C : A value applied to one cell.

FM RRM j

MARKING

Abbreviation Code

Part No.

5FWJ2C

5FWJ2C48M

U5FWJ2C48M

5FWJ2C

Part No. (or abbreviation code)

Lot No.

A line indicates

lead (Pb)-free package or

lead (Pb)-free finish.

Characteristics

indicator

Handling Precaution

Schottky barrier diodes have reverse current characteristics compared to other diodes.

There is a possibility SBD may cause thermal runaway when it is used under high temperature or high voltage.

Please take forward and reverse loss into consideration during design.

The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be

exceeded during operation, even for an instant. The following are the general derating methods that we recommend

when you design a circuit with a device.

RRM

Use this rating with reference to the above. V

has a temperature coefficient of 0.1%/°C. Take

RRM

this temperature coefficient into account designing a device at low temperature.

I :

We recommend that the worst case current be no greater than 80% of the absolute maximum rating

of I and T be below 100°C. When using this device, take the margin into consideration by using an

allowable Tamax-I curve.

This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation,

which seldom occurs during the lifespan of the device.

FSM

T :

Derate this rating when using a device in order to ensure high reliability. We recommend that the

device be used at a T of below 100°C.

Please refer to the Rectifiers databook for further information.

2006-11-10

5FWJ2C48M,U5FWJ2C48M

2006-11-10

5FWJ2C48M,U5FWJ2C48M

2006-11-10

5FWJ2C48M,U5FWJ2C48M

RESTRICTIONS ON PRODUCT USE

20070701-EN

• The information contained herein is subject to change without notice.

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor

devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical

stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of

safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of

such TOSHIBA products could cause loss of human life, bodily injury or damage to property.

In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as

set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and

conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability

Handbook” etc.

• The TOSHIBA products listed in this document are intended for usage in general electronics applications

(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,

etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires

extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or

bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or

spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,

medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his

document shall be made at the customer’s own risk.

• The products described in this document shall not be used or embedded to any downstream products of which

manufacture, use and/or sale are prohibited under any applicable laws and regulations.

• The information contained herein is presented only as a guide for the applications of our products. No

responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which

may result from its use. No license is granted by implication or otherwise under any patents or other rights of

TOSHIBA or the third parties.

• Please contact your sales representative for product-by-product details in this document regarding RoHS

compatibility. Please use these products in this document in compliance with all applicable laws and regulations

that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses

occurring as a result of noncompliance with applicable laws and regulations.

2006-11-10

相关型号：