2SK2964_09 [TOSHIBA]

Chopper Regulators, DC−DC Converters and Motor DriveApplications; 斩波稳压器， DC-DC转换器和电机DriveApplications


型号：	2SK2964_09
厂家：	TOSHIBA
描述：	Chopper Regulators, DC−DC Converters and Motor DriveApplications 斩波稳压器， DC-DC转换器和电机DriveApplications 转换器稳压器电机 DC-DC转换器
文件：	总6页 (文件大小：405K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

2SK2964

TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (L −π−MOSVI)

2SK2964

Chopper Regulators, DC−DC Converters and Motor

DriveApplications

Unit: mm

z 4-V gate drive

z Low drain-source ON-resistance: R

= 0.13 Ω (typ.)

DS (ON)

z High forward transfer admittance: |Y | = 2.5 S (typ.)

z Low leakage current: I

= 100 μA (max) (V

= 30 V)

DSS

z Enhancement mode: V = 0.8 to 2.0 V (V

= 10 V, I = 1 mA)

Absolute Maximum Ratings (Ta = 25°C)

Characteristics

Drain−source voltage

Symbol

Rating

Unit

DSS

Drain−gate voltage (R

Gate−source voltage

= 20 kΩ)

DGR

±20

GSS

DC (Note 1)

Pulse (Note 1)

Drain current

Drain power dissipation

0.5

1.5

JEDEC

JEITA

⎯

(Note 2)

Single pulse avalanche energy

(Note 3)

TOSHIBA

2-5K1B

Avalanche current

0.05

Weight: 0.05 g (typ.)

Repetitive avalanche energy (Note 4)

Channel temperature

°C

150

Storage temperature range

stg

−55 to 150

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in

temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e.

operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate

reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and

Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).

Thermal Characteristics

Characteristics

Symbol

Max

250

Unit

Thermal resistance, channel to ambient

°C / W

th (ch−a)

Note 1: Ensure that the channel temperature does not exceed 150°C.

Note 2: Mounted on a ceramic substrate (25.4 mm × 25.4 mm × 0.8 mm)

Note 3:

= 25 V, T = 25°C (initial), L = 10 mH, R = 25 Ω, I

= 2 A

Note 4: Repetitive rating: pulse width limited by maximum channel temperature

This transistor is an electrostatic-sensitive device.

Handle with care.

2009-09-29

2SK2964

Marking

Note 5: A line to the right of a Lot No. identifies the indication of

product Labels.

Without a line: [[Pb]]/INCLUDES > MCV

With a line: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]

Part No.

(or abbreviation code)

Z C

Please contact your TOSHIBA sales representative for details as to

environmental matters such as the RoHS compatibility of Product.

The RoHS is the Directive 2002/95/EC of the European Parliament

and of the Council of 27 January 2003 on the restriction of the use of

certain hazardous substances in electrical and electronic equipment.

Note 5

Lot No.

Electrical Characteristics (Ta = 25°C)

Characteristics

Gate leakage current

Symbol

Test Condition

Min

Typ.

Max

Unit

= ±16 V, V = 0 V

⎯

±10

100

⎯

μA

GSS

Drain cut−off current

= 30 V, V

= 0 V

DSS

(BR) DSS

Drain−source breakdown voltage

Gate threshold voltage

= 10 mA, V

= 0 V

0.8

⎯

= 10 V, I = 1 mA

⎯

2.0

0.25

0.18

⎯

= 4 V, I = 1 A

0.18

0.13

2.5

140

Drain−source ON-resistance

DS (ON)

= 10 V, I = 1 A

⎯

Forward transfer admittance

Input capacitance

|Y |

= 10 V, I = 1 A

1.2

⎯

iss

= 10 V, V

= 0 V, f = 1 MHz

Reverse transfer capacitance

Output capacitance

⎯

rss

⎯

oss

= 1 A

Rise time

⎯

10 V

OUT

0 V

Turn−on time

Switching time

Fall time

_DD≈ 15 V

Turn−off time

off

195

5.8

Duty ≤ 1%, t = 10 μs

Total gate charge (gate−source

plus gate−drain)

_DD≈ 24 V, V

= 10 V, I = 2 A

Gate−source charge

⎯

4.3

1.5

⎯

Gate−drain (“miller”) Charge

Source−Drain Ratings and Characteristics (Ta = 25°C)

Characteristics

Symbol

Test Condition

Min

—

Typ.

—

Max

Unit

Continuous drain reverse current

—

(Note 1)

Pulse drain reverse current

—

DRP

(Note 1)

Forward voltage (diode)

Reverse recovery time

Reverse recovery charge

= 2 A, V

= 0 V

—

−1.5

—

DSF

= 0 V, dI /dt = 50 A/μs

—

2009-09-29

2SK2964

2009-09-29

2SK2964

2009-09-29

2SK2964

= 25 Ω

⎛

⎜

⎞

⎟

VDSS

⋅L ⋅I²⋅

= 25 V, L = 10 mH

− V

VDSS

⎝

⎠

2009-09-29

2SK2964

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must

also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,

the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA

Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are

solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the

appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any

information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other

referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO

LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.

•

Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.

2009-09-29

2SK2964_09 [TOSHIBA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E