2SC5200N(Q) [TOSHIBA]

TRANSISTOR,BJT,NPN,230V V(BR)CEO,15A I(C),TO-247VAR;


型号：	2SC5200N(Q)
厂家：	TOSHIBA
描述：	TRANSISTOR,BJT,NPN,230V V(BR)CEO,15A I(C),TO-247VAR
文件：	总6页 (文件大小：153K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

2SC5200N

Bipolar Transistors Silicon NPN Triple-Diffused Type

2SC5200N

1. Applications

•

Power Amplifiers

2. Features

(1) High collector voltage: VCEO = 230 V (min)

(2) Complementary to 2SA1943N

(3) Recommended for 100-W high-fidelity audio frequency amplifier output stage

3. Packaging and Internal Circuit

1. Base

2. Collector (Heatsink)

3. Emitter

TO-3P(N)

4. Absolute Maximum Ratings (Note) (Unless otherwise specified, Tc = 25)

Characteristics

Symbol

Rating

Unit

Collector-base voltage

Collector-emitter voltage

Emitter-base voltage

Collector current (DC)

Base current

VCBO

VCEO

VEBO

230

(Note 1)

1.5

150

Collector power dissipation

Junction temperature

Storage temperature

150



Tstg

-55 to 150

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

Note 1: Ensure that the junction temperature does not exceed 150.

5. Thermal Characteristics

Characteristics

Symbol

Max

0.83

Unit

Junction-to-case thermal resistance

Rth(j-c)

/W

2013-02-07

Rev.1.0

2SC5200N

6. Electrical Characteristics

6.1. Static Characteristics (Unless otherwise specified, Tc = 25)

Characteristics

Collector cut-off current

Symbol

Test Condition

Min

Typ.

Max

Unit

ICBO

IEBO

VCB = 230 V, IE = 0 A

VEB = 5 V, IC = 0 A



5.0



µA

Emitter cut-off current

Collector-emitter breakdown voltage

DC current gain

V(BR)CEO IC = 50 mA, IB = 0 A

230



hFE(1)

hFE(2)

VCE(sat)

VBE

VCE = 5 V, IC = 1 A

VCE = 5 V, IC = 7 A

IC = 8 A, IB = 0.8 A

VCE = 5 V, IC = 7 A



160



Collector-emitter saturation voltage

Base-emitter voltage

0.4

0.9

3.0

1.5



6.2. Dynamic Characteristics (Unless otherwise specified, Tc = 25)

Characteristics

Transition frequency

Symbol

Test Condition

VCE = 5 V, IC = 1 A

Min

Typ.

Max

Unit



MHz

Collector output capacitance

Cob

VCB = 10 V, IE = 0 A, f = 1 MHz

200

7. Marking (Note)

Fig. 7.1 Marking

Note: A line under a Lot No. identifies the indication of product Labels.

[[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS

compatibility of Product.

The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on

the restriction of the use of certain hazardous substances in electrical and electronic equipment.

2013-02-07

Rev.1.0

2SC5200N

8. Characteristics Curves (Note)

Fig. 8.1 IC - VCE

Fig. 8.2 hFE - IC

Fig. 8.3 VCE(sat) - IC

Fig. 8.4 IC - VBE

Fig. 8.5 rth(j-c) - tw

(Guaranteed Maximum)

2013-02-07

Rev.1.0

2SC5200N

Fig. 8.6 Safe Operating Area

(Guaranteed Maximum)

Note: The above characteristics curves are presented for reference only and not guaranteed by production test,

unless otherwise noted.

2013-02-07

Rev.1.0

2SC5200N

Package Dimensions

Unit: mm

Weight: 4.6 g (typ.)

Package Name(s)

TOSHIBA: 2-16C1S

Nickname: TO-3P(N)

2013-02-07

Rev.1.0

2SC5200N

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively "Product") without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's

written permission, reproduction is permissible only if reproduction is without alteration/omission.

ThoughTOSHIBAworkscontinuallytoimproveProduct'squalityandreliability,Productcanmalfunctionorfail.Customersareresponsible

for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which

minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage

to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate

the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA

information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the

precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application

with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,

including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating

and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample

application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.

TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.

•

PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY

CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDEDUSE").Exceptforspecificapplicationsasexpresslystatedinthisdocument, UnintendedUseincludes, withoutlimitation,

equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,

trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,

elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR

UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales

representative.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any

intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,

INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND

(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,

OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,

for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products

(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and

regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration

Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all

applicable export laws and regulations.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING

AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

2013-02-07

Rev.1.0

相关型号：