2SC2714-Y [TOSHIBA]
High Frequency Amplifier Applications FM, RF, MIX, IF Amplifier Applications; 高频放大器应用FM ， RF ，混合，中频放大器的应用
| 型号： | 2SC2714-Y |
| 厂家： | 
TOSHIBA |
| 描述： | High Frequency Amplifier Applications FM, RF, MIX, IF Amplifier Applications |
| 文件： | 总8页 (文件大小：548K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2SC2714
TOSHIBA Transistor Silicon NPN Epitaxial Planar Type (PCT process)
2SC2714
High Frequency Amplifier Applications
FM, RF, MIX, IF Amplifier Applications
Unit: mm
•
•
Small reverse transfer capacitance: C = 0.7 pF (typ.)
re
Low noise figure: NF = 2.5dB (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Collector-base voltage
Symbol
Rating
Unit
V
CBO
V
CEO
V
EBO
40
V
V
Collector-emitter voltage
Emitter-base voltage
Collector current
30
4
V
I
20
4
mA
mA
mW
°C
°C
C
Base current
I
B
Collector power dissipation
Junction temperature
Storage temperature range
P
100
C
S-MINI
T
j
125
JEDEC
JEITA
TO-236
T
stg
−55 to 125
SC-59
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum
ratings.
TOSHIBA
2-3F1A
Weight: 12 mg (typ.)
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
= 40 V, I = 0
Min
Typ.
Max
Unit
Collector cut-off current
Emitter cut-off current
I
V
V
⎯
⎯
⎯
⎯
0.5
0.5
μA
μA
CBO
CB
EB
E
I
= 4 V, I = 0
C
EBO
h
FE
(Note)
DC current gain
V
= 6 V, I = 1 mA
40
⎯
200
⎯
CE
C
Reverse transfer capacitance
Transition frequency
Collector-base time constant
Noise figure
C
V
V
V
= 6 V, f = 1 MHz
⎯
⎯
⎯
⎯
17
0.70
550
⎯
⎯
⎯
pF
MHz
ps
re
CB
CE
CB
f
T
= 6 V, I = 1 mA
C
C
rbb’
= 6 V, I = −1 mA, f = 30 MHz
30
5.0
⎯
c
E
･
NF
2.5
23
dB
V
= 6 V, I = −1 mA, f = 100 MHz,
E
CC
Figure 1
Power gain
G
dB
pe
Note: h classification R: 40 to 80, O: 70 to 140, Y: 100 to 200
FE
1
2010-08-24
2SC2714
L1: 0.8 mmφ silver plated copper wire, 4T, 10ID, 8 length
Figure1
NF, Gpe Test Circuit
y Parameter (typ.)
(1) Common emitter (V
= 6 V, I = −1 mA, f = 100 MHz, Ta = 25°C)
E
CE
Characteristics
Input conductance
Symbol
Typ.
Unit
g
2.9
mS
pF
ie
Input capacitance
C
10.2
0.33
ie
Reverse transfer admittance
⎪y ⎪
re
mS
Phase angle of reverse transfer
admittance
θ
−90
40
°
mS
°
re
Forward transfer admittance
|y |
fe
Phase angle of forward transfer
admittance
θ
−20
fe
Output conductance
Output capacitance
g
45
μS
oe
C
1.1
pF
oe
(2) Common base (V
= 6 V, I = −1 mA, f = 100 MHz, Ta = 25°C)
E
CE
Characteristics
Input conductance
Symbol
Typ.
Unit
g
34
mS
pF
ib
Input capacitance
C
−10
0.27
ib
Reverse transfer admittance
⎪y
rb
⎪
mS
Phase angle of reverse transfer
admittance
θ
−105
34
°
mS
°
rb
Forward transfer admittance
|y |
fb
Phase angle of forward transfer
admittance
θ
165
fb
Output conductance
Output capacitance
g
45
μS
ob
C
1.1
pF
ob
2
2010-08-24
2SC2714
Marking
3
2010-08-24
2SC2714
4
2010-08-24
2SC2714
BASE
5
2010-08-24
2SC2714
BASE
6
2010-08-24
2SC2714
yre－f
P
– Ta
C
120
00
80
60
40
20
0
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE Ta (℃)
7
2010-08-24
2SC2714
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,
or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all
relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for
Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for
the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product
design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,
programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for
such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public
impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the
aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign
Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software
or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
8
2010-08-24
相关型号：
2SC2714-YTE85R
TRANSISTOR VHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR, BIP RF Small Signal
TOSHIBA
2SC2714OTE85L
TRANSISTOR VHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR, TO-236, BIP RF Small Signal
TOSHIBA
2SC2714RTE85L
TRANSISTOR VHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR, TO-236, BIP RF Small Signal
TOSHIBA
2SC2714RTE85R
TRANSISTOR VHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR, TO-236, BIP RF Small Signal
TOSHIBA
©2020 ICPDF网 联系我们和版权申明