2SB905-Y(2-7B1A) [TOSHIBA]

TRANSISTOR 1500 mA, 150 V, PNP, Si, SMALL SIGNAL TRANSISTOR, LEAD FREE, 2-7B1A, 3 PIN, BIP General Purpose Small Signal;


型号：	2SB905-Y(2-7B1A)
厂家：	TOSHIBA
描述：	TRANSISTOR 1500 mA, 150 V, PNP, Si, SMALL SIGNAL TRANSISTOR, LEAD FREE, 2-7B1A, 3 PIN, BIP General Purpose Small Signal 放大器晶体管
文件：	总5页 (文件大小：170K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

2SB905

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process)

2SB905

Power Amplifier Applications

Unit: mm

•

Complementary to SD1220

Absolute Maximum Ratings (Ta = 25°C)

Characteristics

Collector-base voltage

Symbol

Rating

Unit

CBO

CEO

EBO

−150

−6

Collector-emitter voltage

Emitter-base voltage

Collector current

−1.5

Base current

−1.0

Ta = 25°C

Tc = 25°C

1.0

Collector power

dissipation

Junction temperature

150

°C

Storage temperature range

stg

−55 to 150

JEDEC

JEITA

―

Note: Using continuously under heavy loads (e.g. the application of high

temperature/current/voltage and the significant change in

temperature, etc.) may cause this product to decrease in the

reliability significantly even if the operating conditions (i.e.

operating temperature/current/voltage, etc.) are within the

absolute maximum ratings.

TOSHIBA

2-7J1A

Weight: 0.36 g (typ.)

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report

and estimated failure rate, etc).

2010-02-05

2SB905

Electrical Characteristics (Ta = 25°C)

Characteristics

Symbol

Test Condition

= −150 V, I = 0

Min

Typ.

Max

Unit

Collector cut-off current

―

−1.0

―

μA

CBO

Emitter cut-off current

= −6 V, I = 0

EBO

(BR) CEO

Collector-emitter breakdown voltage

= −10 mA, I = 0

−150

(Note)

DC current gain

= −5 V, I = −200 mA

―

320

Collector-emitter saturation voltage

Base-emitter voltage

= −500 mA, I = −50 mA

―

−0.5

―

−1.5

−0.8

―

CE (sat)

= −5 V, I = −5 mA

Transition frequency

= −5 V, I = −200 mA

MHz

Collector output capacitance

= −10 V, I = 0, f = 1 MHz

―

Note: h classification R: 60 to 120, O: 100 to 200, Y: 160 to 320

Marking

B905

Part No. (or abbreviation code)

Lot No.

Note 1

Characteristics

indicator

Note 1: A line under a Lot No. identifies the indication of product Labels.

Not underlined: [[Pb]]/INCLUDES > MCV

Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]

Please contact your TOSHIBA sales representative for details as to environmental matters such as the

RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and

of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in

electrical and electronic equipment.

2010-02-05

2SB905

– V

– I

FE C

200

100

−1.6

−1.2

−0.8

−0.4

−60

−100

−30

−200

Common emitter

Tc = 25°C

−20

−15

−10

= −2 V

−5

−7

Common emitter

Tc = 25°C

−4

= −2 mA

−30

−100

−300

−1000

Collector current

(mA)

−4

−8

−12

−16

−20

Collector-emitter voltage

(V)

– I

CE (sat)

200

100

−5

−3

Tc = 100°C

Common emitter

Tc = 25°C

−1

−0.5

−0.3

Common emitter

= −10 V

−5 V

−0.1

/I = 10

C B

−30

−100

−300

−1000

−0.05

−0.03

Collector current

(mA)

−10

−30

−100

−300

−1000

Collector current

(mA)

– I

– V

CE (sat)

−1.6

−1.2

−0.8

−0.4

−5

−3

Common emitter

/I = 10

Common emitter

= −5 V

C B

−1

−0.5

−0.3

Tc = 100°C

−0.1

−0.05

−10

−30

−100

−300

−1000

−0.4

−0.8

−1.2

−1.6

Collector current

(mA)

Base-emitter voltage

(V)

2010-02-05

2SB905

– I

C – V

ob CB

300

100

Common emitter

Tc = 25°C

f = 1 MHz

Tc = 25°C

= −5 V

−2

−1

−3

−10

−30

−100

−3

−10

−30

−100

−300

Collector-base voltage

(V)

Collector current

(mA)

Safe Operating Area

P – Ta

−5

−3

(1) Tc = Ta infinite heat sink

(2) Ceramic substrate

50 × 50 × 0.8 mm

max (pulsed)*

(1)

1 ms*

max (continuous)

(3) No heat sink

10 ms*

100 ms*

−1

DC operation

Tc = 25°C

−0.5

−0.3

(2)

(3)

*: Single nonrepetitive pulse

Tc = 25°C

−0.1

Curves must be derated

linearly with increase in

temperature.

100

125

150

175

−0.05

−0.03

max

CEO

Ambient temperature Ta (°C)

−3

−10

−30

−100

−300

Collector-emitter voltage

(V)

2010-02-05

2SB905

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR

APPLICATIONS.

•

Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.

2010-02-05

2SB905-Y(2-7B1A) [TOSHIBA]

相关型号：

2SB905-Y(2-7B2A)

2SB905-Y(2-7J1A)

2SB905-Y(TE16L1)

2SB905O

2SB905O(SM)

2SB905R

2SB905R(SM)

2SB905Y

2SB905Y(SM)

2SB905_07

2SB905_10

2SB906