XC6365A155ML [TOREX]
PWM Controllde, PWM/PFM Switchable Step-Down DC/DC Converers; PWM Controllde , PWM / PFM切换降压型DC / DC Converers型号: | XC6365A155ML |
厂家: | Torex Semiconductor |
描述: | PWM Controllde, PWM/PFM Switchable Step-Down DC/DC Converers |
文件: | 总21页 (文件大小:1663K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
☆GO-Compatible
■APPLICATIONS
◆Input Voltage Range : 2.2~10.0V
◆Output Voltage Range : 1.5~6.0V (±2.5%)
◆Oscillator Frequency : 300kHz (±15%)
◆Maximum Duty Ratio : 100%
●Electronic information organizers
●Palmtops
●Cellular and portable phones
●Portable audio systems
◆High Efficiency
: 92%
●Various multi-function power supplies
◆PWM/PFM Switching Control (XC6366)
◆SOT-25 Package
■GENERAL DESCRIPTION
■FEATURES
The XC6365/66 series are multi-functional step-down DC/DC
converters with built-in high speed, low ON resistance drivers.
An output current of more than 1A is possible using an
externally connected transistor, coil, diode and capacitor.
Output voltage is programmable in 100mV increments between
1.5V to 6.0V (VOUT) (±2.5% accuracy). Further, with 1.0V of
standard voltage supply internal and using externally
connected components, output voltage can be set up freely
(FB). With a 300kHz switching frequency, the size of the
external components can be reduced.
Input Voltage Range : 2.2V ~ 10V (VOUT type)
Output Voltage Range : 1.5V ~ 6.0V programmable in
100mV increments (±2.5%)
Oscillation Frequency : 300kHz (±15%)
: Custom products for 180, 500kHz
Output Current
: More than 1.0A
(VIN=5.0V, VOUT=3.0V)
: 92% (TYP.)
High Efficiency
Stand-by Capability : ISTB=0.5μA (MAX.)
Control switches from PWM to PFM during light loads with the
XC6366 (PWM/PFM switchable) and the series is highly
efficient from light loads to large output currents.
In relation to soft-start time, both internally set-up 10msec
types (A, B) and external resistor or capacitor regulated types
(C, D) are available.
Soft-start time set-up externally type possible
Internally set-up output voltage type possible (VOUT)
Externally set-up output voltage type possible (FB)
Package
: SOT-25
During stand-by time (CE pin "Low" ), current consumption is
reduced to less than 0.5μA.
With U.V.L.O. internal, the external transistor will be forcibly
switched off if used below the stipulated voltage.
■TYPICAL PERFORMANCE
■TYPICAL APPLICATION CIRCUIT
CHARACTERISTICS
703
XC6365 6366 ETR0501_001.doc
XC6365/6366 Series
■PIN CONFIGURATION
■PIN ASSIGNMENT
PIN NUMBER
PIN NAME
EXT/
FUNCTION
External Transistor Connection
Power Supply
1
2
3
VDD
GND
Ground
Chip Enable Soft-Start Capacitor Connection
with Soft-Start Externally Set-Up Types (C, D)
Output Voltage Monitor FB with Externally
Set-Up Types (B, D)
4
CE
5
VOUT (FB)
■PRODUCT CLASSIFICATION
●Selection Guide
704
XC6365/6366
Series
■PRODUCT CLASSIFICATION (Continued)
●Ordering Information
XC6365①②③④⑤⑥
XC6366①②③④⑤⑥
PWM control
PWM/PFM switching control
DESIGNATOR
DESCRIPTION
SYMBOL
A
DESCRIPTION
: VOUT type: Internally set-up, soft-start internally set-up
: FB type: Externally set-up, soft-start internally set-up
: VOUT type: Internally set-up, soft-start externally set-up
: FB type: Externally set-up, soft-start internally set-up
: VOUT type: 3.0V output → ②=3, ③=0
: FB type: 10 fixed → ②=1, ③=0 fixed
: 300kHz
B
①
Type of DC/DC Converter
C
D
15~60
② ③
④
Output Voltage
10
3
Oscillation Frequency
5
: 500kHz (custom)
2
: 180kHz (custom)
Package
M
R
L
: SOT-25 (SOT-23-5)
⑤
⑥
: Embossed tape, standard feed
Device Orientation
: Embossed tape, reverse feed
■PACKAGING INFORMATION
●SOT-25
705
XC6365/6366 Series
■MARKING RULE
①Represents product classification
5
4
MARK
PRODUCT SERIES
XC6365A
MARK
K
L
PRODUCT SERIES
XC6366A
A
B
C
D
①
②
③
④
XC6365B
XC6366B
XC6365C
M
N
XC6366C
XC6366D
XC6365D
1
2
3
SOT-25
(TOP VIEW)
②Represents integer of output voltage and oscillation frequency
OSCILLATION FREQUENCY (kHz)
OUTPUT VOLTAGE
100
B
C
D
E
180
300
500
B
C
D
E
1.x
2.x
3.x
4.x
5.x
6.x
1
2
1
2
3
4
3
4
F
H
5
6
5
6
F
H
③Represents decimal number of output voltage and oscillation frequency
OSCILLATION FREQUENCY (kHz)
OUTPUT VOLTAGE
100
0
180
0
300
A
500
A
B
C
D
E
F
H
K
L
M
x.0
x.1
x.2
x.3
x.4
x.5
x.6
x.7
x.8
x.9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
B
C
D
E
F
H
K
L
M
9
9
④Represents production lot number
0 to 9, A to Z repeated (G, I, J, O, Q, W excepted)
706
XC6365/6366
Series
■BLOCK DIAGRAMS
XC6365, XC6366 Series A, C type (VOUT)
XC6365, XC6366 Series B, D type (FB)
707
XC6365/6366 Series
■ABSOLUTE MAXIMUM RATINGS
Ta = 25℃
PARAMETER
VIN Pin Voltage
VOUT Pin Voltage
FB Pin Voltage
CE Pin Voltage
EXT/ Pin Voltage
EXT/ Pin Current
SYMBOL
VDD
VOUT
VFB
VCE
VEXT/
IEXT/
RATINGS
-0.3 ~ +12
-0.3 ~ VIN +0.3
-0.3 ~ VIN +0.3
-0.3 ~ VIN +0.3
-0.3 ~ VIN +0.3
±100
150
-30 ~ +80
-40 ~ +125
UNITS
V
V
V
V
V
mA
mW
℃
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Pd
Topr
Tstg
℃
Note: Voltage is all ground standardized.
■ELECTRICAL CHARACTERISTICS
XC6365A333MR, XC6366A333MR
(VOUT=3.3V, FOSC=300kHz)
Ta=25℃
PARAMETER
Output Voltage
Maximum Input Voltage
U.V.L.O. Voltage
SYMBOL
VOUT
CONDITIONS MIN.
TYP. MAX. UNITS
3.218 3.300 3.383
10.0
V
V
VIN
-
-
Same as IDD1,
VUVLO
IDD1
0.9
-
2.2
V
(Minimum Operating Voltage)
Supply Current 1
Voltage which EXT/pin voltage holding “H” level
No external components, CE=VDD, VOUT=0V
-
-
-
-
57
57
15
-
102
102
27
μA
μA
μA
μA
No external components,
XC6365
XC6366
Supply Current 2
Stand-by Current
IDD2
CE=VOUT=VDD
ISTB
No external components, CE=VOUT=0V
Measuring of EXT/ waveform,
VIN=output voltage + 0.1V
0.5
Oscillation Frequency
FOSC
MAXDTY
PFMDTY No load (XC6366 only)
255
300
345
kHz
Maximum Duty Ratio
PFM Duty Ratio
100
15
-
25
-
35
%
%
No external components, VOUT=0V,
CE "High" Voltage
VCEH
0.65
-
-
V
Voltage which EXT/pin voltage holding “L” level
No external components, VOUT=0V,
Voltage which EXT/pin voltage holding “H” level
Same as IDD2, VEXT/=VDD-0.4V
Same as IDD1, VEXT/=0.4V
CE "Low" Voltage
VCEL
-
-
0.20
V
EXT "High" ON Resistance
EXT "Low" ON Resistance
REXTBH
REXTBL
-
-
16
14
22
19
μA
μA
Use of a XP162A12A6 transistor
recommended
Connect RSS, CSS, CE, 0V→ 3.0V
(When VIN≦3.0V, VIN=3.0V)
Efficiency
EFFI
TSS
-
92
-
%
msec
Soft-Start Time
5
10
20
Conditions: 1. Unless otherwise stated, connect external components. VIN=VDD = 5.0V, IOUT = 220mA
2. XC6365/66C series external components: CSS=0.033μF, RSS=470kΩ
708
XC6365/6366
Series
■ELECTRICAL CHARACTERISTICS (Continued)
(VOUT=5.0V, FOSC=300kHz)
XC6365A503MR, XC6366A503MR
Ta=25℃
PARAMETER
Output Voltage
Maximum Input Voltage
U.V.L.O. Voltage
SYMBOL
VOUT
CONDITIONS MIN.
TYP. MAX. UNITS
4.875 5.000 5.125
10.0
V
V
VIN
-
-
Same as IDD1,
VUVLO
IDD1
0.9
-
2.2
V
(Minimum Operating Voltage)
Supply Current 1
Voltage which EXT/pin voltage holding “H” level
No external components, CE=VDD, VOUT=0V
-
-
-
-
67
67
16
-
122
122
29
μA
μA
μA
μA
No external components,
XC6365
XC6366
Supply Current 2
Stand-by Current
IDD2
CE=VOUT=VDD
ISTB
No external components, CE=VOUT=0V
Measuring of EXT/ waveform,
VIN=output voltage + 0.1V
0.5
Oscillation Frequency
FOSC
MAXDTY
PFMDTY No load (XC6366 only)
255
300
345
kHz
Maximum Duty Ratio
PFM Duty Ratio
100
15
-
25
-
35
%
%
No external components, VOUT=0V,
CE "High" Voltage
VCEH
0.65
-
-
V
Voltage which EXT/pin voltage holding “L” level
No external components, VOUT=0V,
Voltage which EXT/pin voltage holding “H” level
Same as IDD2, VEXT/=VIN-0.4V
Same as IDD1, VEXT/=0.4V
CE "Low" Voltage
VCEL
-
-
0.20
V
EXT "High" ON Resistance
EXT "Low" ON Resistance
REXTBH
REXTBL
-
-
12
10
17
14
μA
μA
Use of a XP162A12A6
transistor recommended
Connect RSS, CSS, CE, 0V→ 3.0V
(When VIN≦3.0V, VIN=3.0V)
Efficiency
EFFI
TSS
-
93
10
-
%
Soft-Start Time
5
20
msec
Conditions: 1. Unless otherwise stated, connect external components. VIN=VDD = 7.5V, IOUT = 330mA
2. XC6365/66C series external components: CSS=0.033μF, RSS=470kΩ
709
XC6365/6366 Series
■ELECTRICAL CHARACTERISTICS (Continued)
XC6365A103MR, XC6366A103MR
(VOUT=3.0V, FOSC=300kHz)
MIN. TYP.
Ta=25℃
MAX. UNITS
PARAMETER
Output Voltage
SYMBOL
VOUT
CONDITIONS
2.975 3.000 3.075
V
Maximum Input Voltage
U.V.L.O. Voltage
(Minimum Operating Voltage)
Supply Current 1
VIN
10.0
-
-
V
Same as IDD1,
Voltage which EXT/pin voltage holding “H” level
No external components, CE=VIN, VOUT=0V
No external components,
CE=VDD, FB=1.2V
No external components, CE=FB=0V
Measuring of EXT/ waveform,
VIN=output voltage + 0.1V
VUVLO
IDD1
0.9
-
2.2
V
-
-
-
-
55
55
15
-
100
100
27
μA
μA
μA
μA
XC6365
XC6366
Supply Current 2
Stand-by Current
IDD2
ISTB
0.5
Oscillation Frequency
FOSC
MAXDTY
PFMDTY No load (XC6366 only)
255
300
345
kHz
Maximum Duty Ratio
PFM Duty Ratio
100
15
-
25
-
35
%
%
No external components, FB=0V,
CE "High" Voltage
VCEH
0.65
-
-
V
Voltage which EXT/pin voltage holding “L” level
No external components, VOUT=0V,
Voltage which EXT/pin voltage holding “H” level
Same as IDD2, VEXT/=VIN-0.4V
Same as IDD1, VEXT/=0.4V
CE "Low" Voltage
VCEL
-
-
0.20
V
EXT "High" ON Resistance
EXT "Low" ON Resistance
REXTBH
REXTBL
-
-
17
15
24
20
μA
μA
Use of a XP162A12A6
transistor recommended
Connect RSS, CSS, CE, 0V→ 3.0V
(When VIN≦3.0V, VIN=3.0V)
Efficiency
EFFI
TSS
-
92
10
-
%
Soft-Start Time
5
20
msec
Conditions: 1. Unless otherwise stated, connect external components. VIN=VDD = 4.5V, IOUT = 200mA
2. XC6365/66C series external components: CSS=0.033μF, RSS=470kΩ
3. RFB1 = 400kΩ, RFB2 = 200kΩ, CFB = 100ppF
710
XC6365/6366
Series
■TEST CIRCUITS
Circuit 1. XC6365A, XC6366A
Circuit 2. XC6365B, XC6366B
Circuit 3. XC6365C, XC6366C
711
XC6365/6366 Series
■TEST CIRCUITS (Continued)
Circuit 4. XC6365D, XC6366D
Circuit 6. XC6365B, XC6366B (when used with a PNP transistor)
712
XC6365/6366
Series
■TEST CIRCUITS (Continued)
Circuit 7. XC6365C, XC6366C (when used with a PNP transistor)
Recommended Components
C, D type (soft-start externally set-up)
CSS : 0.033μF (Ceramic Capacitor)
RSS : 470kΩ(C type), 330kΩ(D type)
Tr : XP162A12A6PR (Torex P-channel Power MOSFET)
Please use a PNP transistor where VIN < 2.5V
L
: 22μH (CR54, SUMIDA, FOSC=300kHz)
47μH (CR75, SUMIDA, FOSC=180kHz)
10μH (CR54, SUMIDA, FOSC=500kHz)
B, D type (FB type)
RFB : Set up so that RFB1 / RFB2 = VOUT – 1
(VOUT = setting output voltage),
SD : MA2Q735 (Schottky Diode, MATSUSHITA)
CL :10V, 47μF (Tantalum capacitor, NICHICHEMl MCE)
CIN :16V 10μF (Tantalum capacitor, NICHICHEMI MCE)
RFB1 = RFB2 ≦ 2MΩ
CFB : Set up so that fzfb = 1÷(2π x CFB x RFB1) is within
the 0.5 to 20kHz range (10kHz conventional)
Adjustments necessary in respect of L, CL.
e.g. : VOUT = 3.0V
PNP Tr. Type
Tr : 2SA1213 (TOSHIBA)
RB : 500Ω(Adjust according to load and Tr. hFE levels)
CB : 2200pF (Ceramic Type)
RFB1 = 400kΩ, RFB2 = 200kΩ, CFB = 100pF
Set up so that CB≦1 / (2π x RB x FOSC x 0.7)
713
XC6365/6366 Series
■NOTES ON USE
1. Take ample care to ensure that none of the IC's, nor the external component's, absolute maximum ratings are exceeded.
2. Be extremely careful when selecting parts and do not limit your reference to the specifications and characteristics for the
DC/DC converter alone. The IC also depends, to a great extent, upon the external components.
3. Arrange the peripherals in the environs of the IC. In order to reduce wiring impedance, use short, thick wires. In particular,
wire the load capacitor as close as possible and strengthen the ground wiring sufficiently.
4. Ground current during switching may cause the IC's operations to become unstable due to changes in ground voltage, so
please strengthen the IC's GND pin surroundings.
●External Components
1. Setting soft start time
To set a longer soft start time, please use XC6365C or XC6365D series which soft start function is externally set up.
For the measurement of soft start time TSS, the time is needed to be between the maximum and the minimum value indicated
in the chart below. Please set a soft start capacitor CSS according to the application.
2. Setting RFB1 and CFB
fzfb=1 ÷ (2 π × CFB × RFB1)
As the combination of RFB1 and CFB enable to set fzfb between 0.5kHz to 20kHz, within the realm of fzfb=0.5kHz to
fzfb=20kHz as the chart below can be effective.
Under normal condition, please set the combination to configure around fzfb=10kHz.
714
XC6365/6366
Series
■TYPICAL PERFORMANCE CHARACTERISTICS
715
XC6365/6366 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(Continued)
716
XC6365/6366
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
717
XC6365/6366 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(Continued)
718
XC6365/6366
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
719
XC6365/6366 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(Continued)
720
XC6365/6366
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
721
XC6365/6366 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
722
XC6365/6366
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
723
相关型号:
XC6365A163ER-G
Switching Regulator/Controller, Voltage-mode, 1A, 345kHz Switching Freq-Max, CMOS, PDSO6
TOREX
XC6365A163ML
Switching Regulator/Controller, Voltage-mode, 1A, 345kHz Switching Freq-Max, PDSO5,
TOREX
XC6365A163MR-G
Switching Regulator/Controller, Voltage-mode, 1A, 345kHz Switching Freq-Max, CMOS, PDSO5
TOREX
XC6365A173ER
Switching Regulator/Controller, Voltage-mode, 1A, 345kHz Switching Freq-Max, CMOS, PDSO6
TOREX
XC6365A173MR-G
Switching Regulator/Controller, Voltage-mode, 1A, 345kHz Switching Freq-Max, CMOS, PDSO5
TOREX
XC6365A183MR
Switching Regulator/Controller, Voltage-mode, 1A, 345kHz Switching Freq-Max, PDSO5,
TOREX
XC6365A193ER-G
Switching Regulator/Controller, Voltage-mode, 1A, 345kHz Switching Freq-Max, CMOS, PDSO6
TOREX
XC6365A193ML
Switching Regulator/Controller, Voltage-mode, 1A, 345kHz Switching Freq-Max, PDSO5,
TOREX
©2020 ICPDF网 联系我们和版权申明