TSER4905RTDR [TI]
用于高分辨率面板的 4K DSI 转 V³Link™ 串行器 | RTD | 64 | -20 to 85;
| 型号： | TSER4905RTDR |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 用于高分辨率面板的 4K DSI 转 V³Link™ 串行器 | RTD | 64 | -20 to 85 |
| 文件： | 总6页 (文件大小：418K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TSER4905
SNLS723 – AUGUST 2022
TSER4905 4K DSI to V3Link Bridge Serializer
1 Features
3 Description
•
Single or dual port MIPI DSI receiver
– Compliant to D-PHY v1.2 and DSI v1.3.1
– Packed 16/18/24/30-bit RGB and 16-bit YCbCr
– Loosely packed 18-bit RGB and 20-bit 4:2:2
– 1 clock lane and 1-4 configurable data lanes
per D-PHY Port
– Up to 2.5 Gbps/lane with skew calibration
– Supports data lane swap and polarity inversion
– Supports both burst and non-burst mode
– SuperFrame Unpacking Capability
– Suitable for 4K @ 60 Hz video resolution
V3Link Enhanced Video interface
– Supports 10.8/6.75/3.375 Gbps per channel;
Up to 21.6 Gbps over dual channels
– Coax/STP interconnect support
– Port Splitting to enable Y-cable interfaces
Ultra-low latency control channel
TSER4905 is a MIPI DSI to V3Link bridge device. In
conjunction with an V3Link deserializer, the chipset
provides a high-speed serialized interface over low-
cost 50Ω coax or STP cables. The TSER4905 is a
D-PHY v1.2 compliant device that serializes a MIPI
DSI input supporting video resolutions including 4K
with 30-bit color depth. The V3Link interface supports
video and audio data transmission and full duplex
control, including I2C and GPIO data over a single
channel or dual channels. Consolidation of video
data and control over two V3Link lanes reduces
the interconnect size and weight and simplifies
system design. EMI is minimized by the use of
low voltage differential signaling, data scrambling,
SSCG, and randomization. This device can operate
either in V3Link Mode or V3Link Enhanced Video
Mode. In V3Link Enhanced Video Mode, the device
supports V3Link Enhanced Video output over a single
coax/STP cable operating up to 10.8 Gbps line rate or
Dual Coax/STP cable operating up to 21.6 Gbps line
rate, supporting 4K+ resolutions. In V3Link mode, the
devices supports up to 720p and 1080p resolutions
with 24-bit color depth over a single/dual link. In
Vision compatible mode, the device is interoperable
with V3Link Vision deserializers supporting resolutions
up to 8MP+/40fps.
•
•
•
•
– Two I2C up to 1MHz (up to 3.4 MHz for local
bus access)
– High speed GPIOs
Compatibility
– V3Link Video and V3Link Enhanced Video
product families
– V3Link Vision product family
Security and diagnostics
– Voltage and temperature monitoring
– Line Fault Detection
– BIST and pattern generation
– CRC and error diagnostics
– Unique ID for counterfeit protection
– ECC on control bits
Device Information
PART NUMBER
PACKAGE (1)
BODY SIZE (NOM)
TSER4905
VQFN (64)
9.00 mm × 9.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
•
Advanced link robustness and EMC control
MIPI DSI
V3Link
(over Coax or STP)
– Data scrambling
– Spread spectrum clocking generation (SSCG)
Low power operation
D0+/-
Open LDI
D1+/-
RIN0+
RIN0-
DOUT0+
DOUT0-
CHn_TX0P/N
D2+/-
D3+/-
CHn_TX1P/N
CHn_TX2P/N
Display
or Graphics
Processor
DOUT1+
DOUT1-
RIN1+
RIN1-
•
•
CLK+/-
CHn_CLKP/N
Processor
CHn_TX3P/N
CHn_TX4P/N
D0+/-
D1+/-
– 1.8-V and 1.1-V dual power supply
Qualifications
V3Link Enhanced
TSER4905
Serializer
Video
D2+/-
D3+/-
Deserializer
CLK+/-
– ISO 10605 and IEC 61000-4-2 ESD compliant
– 64 pin QFN Wettable flanks 9 mm x 9 mm
– Temperature Range: −20℃ to +85℃
I2C
IDx
I2C
IDx
DOUT+
DOUT-
Secondary
Display
Simplified Application Diagram
2 Applications
•
High Resolution Display:
– Operating room displays
– Seatback entertainment displays
– High resolution HMI
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
TSER4905
SNLS723 – AUGUST 2022
www.ti.com
Copyright © 2023 Texas Instruments Incorporated
2
Submit Document Feedback
Product Folder Links: TSER4905
PACKAGE OPTION ADDENDUM
www.ti.com
22-Mar-2023
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
(6)
TSER4905RTDR
TSER4905RTDT
ACTIVE
ACTIVE
VQFN
VQFN
RTD
RTD
64
64
2000 RoHS & Green Call TI | NIPDAUAG
250 RoHS & Green Call TI | NIPDAUAG
Level-3-260C-168 HR
Level-3-260C-168 HR
-20 to 85
-20 to 85
TSER4905
TSER4905
Samples
Samples
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
22-Mar-2023
Addendum-Page 2
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, regulatory or other requirements.
These resources are subject to change without notice. TI grants you permission to use these resources only for development of an
application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license
is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you
will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these
resources.
TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with
such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for
TI products.
TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2023, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明