TRS3243CPW [TI]
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD (HBM) PROTECTION; 3V至5.5V多通道RS - 232线路驱动器/接收器,具有± 15 kV的ESD ( HBM )保护型号: | TRS3243CPW |
厂家: | TEXAS INSTRUMENTS |
描述: | 3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD (HBM) PROTECTION |
文件: | 总19页 (文件大小:583K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
Battery-Powered
Systems
PDAs
Notebooks
Laptops
Palmtop
PCs
Hand-Held Equipment
•
•
•
Single-Chip and Single-Supply Interface
for IBM™ PC/AT™ Serial Port
RS-232 Bus-Pin ESD Protection Exceeds
±15 kV Using Human-Body Model (HBM)
Meets or Exceeds the Requirements of
TIA/EIA-232-F and ITU v.28 Standards
•
•
•
•
•
•
Operates With 3-V to 5.5-V VCC Supply
Three Drivers and Five Receivers
Low Standby Current . . . 1 mA Typical
External Capacitors . . . 4 × 0.1 mF
Accepts 5-V Logic Input With 3.3-V Supply
DB, DW, OR PW PACKAGE
(TOP VIEW)
C2+
C2−
V−
1
28 C1+
Always-Active Noninverting Receiver
Output (ROUT2B)
2
27
26
25
24
23
22
21
20
19
18
17
16
15
V+
3
V
CC
•
Operating Speed
4
RIN1
RIN2
RIN3
RIN4
RIN5
DOUT1
DOUT2
DOUT3
DIN3
DIN2
DIN1
GND
C1−
–
–
TRS3243C, TRS3243I . . . 250 Kbit/s
5
TRS3243FC, TRS3243FI . . . 1000 Kbit/s
6
FORCEON
FORCEOFF
INVALID
ROUT2B
ROUT1
ROUT2
ROUT3
ROUT4
ROUT5
7
•
Operating Temperature
8
–
–
TRS3243C, TRS3243FC . . . 0°C to 70°C
TRS3243I, TRS3243FI . . . –40°C to 85°C
9
10
11
12
13
14
•
•
Serial-Mouse Driveability
Auto-Powerdown Feature to Disable Driver
Outputs When No Valid RS-232 Signal Is
Sensed
DESCRIPTION/ORDERING INFORMATION
The TRS3243 consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD
(HBM) protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of
TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the
serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port
used in an IBM PC/AT or compatible. The charge pump and four small external capacitors allow operation from
a single 3-V to 5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT2B),
which allows applications using the ring indicator to transmit data while the device is powered down.
Flexible control options for power management are available when the serial port is inactive. The
auto-powerdown feature functions when FORCEON is low and FORCEOFF is high. During this mode of
operation, if the device does not sense a valid RS-232 signal, the driver outputs are disabled. If FORCEOFF is
set low, both drivers and receivers (except ROUT2B) are shut off, and the supply current is reduced to 1 μA.
Disconnecting the serial port or turning off the peripheral drivers causes the auto-powerdown condition to occur.
Auto-powerdown can be disabled when FORCEON and FORCEOFF are high and should be done when driving
a serial mouse. With auto-powerdown enabled, the device is activated automatically when a valid signal is
applied to any receiver input. The INVALID output is used to notify the user if an RS-232 signal is present at any
receiver input. INVALID is high (valid data) if any receiver input voltage is greater than 2.7 V or less than –2.7 V
or has been between –0.3 V and 0.3 V for less than 30 μs. INVALID is low (invalid data) if all receiver input
voltages are between –0.3 V and 0.3 V for more than 30 μs. Refer to Figure 5 for receiver input levels.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
IBM, PC/AT are trademarks of IBM.
PRODUCTION DATA information is current as of publication date.
Copyright © 2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
ORDERING INFORMATION
TA
PACKAGE(1)(2)
ORDERABLE PART NUMBER
TRS3243CDW
TOP-SIDE MARKING
Tube of 20
SOIC – DW
SSOP – DB
TSSOP – PW
SOIC – DW
SSOP – DB
TSSOP – PW
TRS3243C
Reel of 1000
Tube of 50
TRS3243CDWR
TRS3243CDB
0°C to 70°C
TRS3243C
TRS3243
TRS3243I
TRS3243I
TRS3243I
Reel of 2000
Tube of 50
TRS3243CDBR
TRS3243CPW
Reel of 2000
Tube of 50
TRS3243CPWR
TRS3243IDW
Reel of 2000
Tube of 50
TRS3243IDWR
TRS3243IDB
–40°C to 85°C
Reel of 2000
Tube of 50
TRS3243IDBR
TRS3243IPW
Reel of 2000
TRS3243IPWR
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
FUNCTION TABLES
Each Driver(1)
INPUTS
OUTPUT
DOUT
DRIVER STATUS
VALID RIN
RS-232 LEVEL
DIN
FORCEON
FORCEOFF
X
L
X
H
H
L
L
X
X
Z
H
L
Powered off
H
H
H
H
H
H
Normal operation with
auto-powerdown disabled
H
L
X
Yes
Yes
No
No
H
L
Normal operation with
auto-powerdown enabled
H
L
L
L
Z
Z
Power off by
auto-powerdown feature
H
L
(1) H = high level, L = low level, X = irrelevant, Z = high impedance
Each Receiver(1)
INPUTS
OUTPUTS
RECEIVER STATUS
RIN1,
RIN3–RIN5
VALID RIN
RS-232 LEVEL
RIN2
FORCEOFF
ROUT2B
ROUT
L
H
X
X
L
L
X
L
H
L
Z
Z
H
L
Powered off while
ROUT2B is active
X
L
L
H
H
H
H
H
Yes
Yes
Yes
Yes
Yes
L
H
L
Normal operation with
auto-powerdown
disabled/enabled
H
L
H
H
L
H
L
H
H
Open
Open
H
(1) H = high level, L = low level, X = irrelevant, Z = high impedance (off), Open = input disconnected or connected driver off
2
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
LOGIC DIAGRAM (POSITIVE LOGIC)
14
13
12
9
10
11
DIN1
DIN2
DIN3
DOUT1
DOUT2
DOUT3
22
23
FORCEOFF
FORCEON
21
Auto-Powerdown
INVALID
19
20
4
ROUT1
RIN1
RIN2
5 k
Ω
ROUT2B
18
17
16
15
5
ROUT2
5 k
Ω
6
ROUT3
ROUT4
ROUT5
RIN3
RIN4
RIN5
5 k
Ω
7
5 k
Ω
8
5 k
Ω
3
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.3
–0.3
0.3
MAX UNIT
VCC
V+
Supply voltage range(2)
Positive output supply voltage range(2)
Negative output supply voltage range(2)
6
V
V
V
V
7
V–
–7
V+ – V– Supply voltage difference(2)
13
Driver (FORCEOFF, FORCEON)
Receiver
–0.3
–25
6
25
VI
Input voltage range
Output voltage range
V
V
Driver
–13.2
–0.3
13.2
VO
Receiver (INVALID)
DB package
VCC + 0.3
62
θJA
Package thermal impedance(3)(4)
DW package
46 °C/W
PW package
62
TJ
Operating virtual junction temperature
Storage temperature range
150
150
°C
°C
Tstg
–65
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to network GND.
(3) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions(1)
See Figure 6
MIN
3
NOM
3.3
5
MAX UNIT
VCC = 3.3 V
VCC = 5 V
VCC = 3.3 V
VCC = 5 V
3.6
V
Supply voltage
4.5
2
5.5
DIN, FORCEOFF,
FORCEON
VIH Driver and control high-level input voltage
V
2.4
VIL Driver and control low-level input voltage DIN, FORCEOFF, FORCEON
0.8
5.5
25
70
85
V
V
V
VI
VI
Driver and control input voltage
Receiver input voltage
DIN, FORCEOFF, FORCEON
0
–25
0
TRS3243C, TRS3243FC
TRS3243I, TRS3243FI
TA Operating free-air temperature
°C
–40
(1) Test conditions are C1–C4 = 0.1 μF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at VCC = 5 V ± 0.5 V.
Electrical Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 6)
PARAMETER
TEST CONDITIONS
MIN
TYP(2) MAX
UNIT
II
Input leakage current FORCEOFF, FORCEON
±0.01
0.3
1
±1
μA
No load,
Auto-powerdown disabled
1
mA
FORCEOFF and FORCEON at VCC
Powered off
No load, FORCEOFF at GND
10
Supply current
ICC
No load, FORCEOFF at VCC
FORCEON at GND,
All RIN are open or grounded,
All DIN are grounded
,
(TA = 25°C)
μA
Auto-powerdown enabled
1
10
(1) Test conditions are C1–C4 = 0.1 μF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
4
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
DRIVER SECTION
Electrical Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 6)
PARAMETER
TEST CONDITIONS
All DOUT at RL = 3 kΩ to GND
MIN TYP(2) MAX
UNIT
V
VOH High-level output voltage
VOL Low-level output voltage
5
5.4
All DOUT at RL = 3 kΩ to GND
–5
–5.4
V
Output voltage
VO
DIN1 = DIN2 = GND, DIN3 = VCC, 3-kΩ to GND at DOUT3,
DOUT1 = DOUT2 = 2.5 mA
±5
V
(mouse driveability)
IIH
IIL
High-level input current
Low-level input current
VI = VCC
±0.01
±0.01
±1
±1
μA
μA
V
VI at GND
Vhys Input hysteresis
Short-circuit output current(3)
±1
VCC = 3.6 V,
VO = 0 V
±35
±35
±60
±60
IOS
ro
mA
Ω
VCC = 5.5 V,
VO = 0 V
Output resistance
VCC, V+, and V– = 0 V,
VO = ±2 V
VO = ±12 V,
VO = ±10 V,
300
10M
VCC = 3 V to 3.6 V
±25
±25
Ioff
Output leakage current
FORCEOFF = GND,
μA
VCC = 4.5 V to 5.5 V
(1) Test conditions are C1–C4 = 0.1 μF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
(3) Short-circuit durations should be controlled to prevent exceeding the device absolute power dissipation ratings, and not more than one
output should be shorted at a time.
Switching Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 6)
TRS3243C,
TRS3243I
PARAMETER
TEST CONDITIONS
UNIT
MIN
TYP(2) MAX
CL = 1000 pF,
One DOUT switching,
RL = 3 kΩ,
See Figure 1
Maximum data rate
Pulse skew(3)
150
250
100
kbit/s
ns
tsk(p)
CL = 150 pF to 2500 pF,
RL = 3 kΩ to 7 kΩ, See Figure 2
CL = 150 pF to 1000 pF
6
4
30
30
Slew rate, transition region
(see Figure 1)
VCC = 3.3 V,
RL = 3 kΩ to 7 kΩ
SR(tr)
V/μs
CL = 150 pF to 2500 pF
(1) Test conditions are C1–C4 = 0.1 μF at VCC = 3.3 V + 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
(3) Pulse skew is defined as |tPLH – tPHL| of each channel of the same device.
Switching Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 6)
TRS3243FC,
TRS3243FI
MIN TYP(2)
PARAMETER
TEST CONDITIONS
UNIT
MAX
CL = 1000 pF
CL = 250 pF,
CL = 1000 pF,
250
Maximum data rate
(see Figure 1)
RL = 3 kΩ,
One DOUT switching,
VCC = 3 V to 4.5 V
VCC = 4.5 V to 4.5 V
See Figure 2
1000
kbit/s
1000
tsk(p)
Pulse skew(3)
CL = 150 pF to 2500 pF, RL = 3 kΩ to 7 kΩ,
25
ns
Slew rate, transition
region (see Figure 1)
SR(tr)
CL = 150 pF to 1000 pF, RL = 3 kΩ to 7 kΩ,
VCC = 3.3 V
18
150
V/μs
(1) Test conditions are C1–C4 = 0.1 μF at VCC = 3.3 V + 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
(3) Pulse skew is defined as |tPLH – tPHL| of each channel of the same device.
5
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
RECEIVER SECTION
Electrical Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 6)
PARAMETER
High-level output voltage
Low-level output voltage
TEST CONDITIONS
IOH = –1 mA
MIN
TYP(2)
MAX UNIT
VOH
VOL
VCC – 0.6
VCC – 0.1
V
IOH = 1.6 mA
VCC = 3.3 V
VCC = 5 V
0.4
2.4
2.4
V
1.6
1.9
VIT+
Positive-going input threshold voltage
Negative-going input threshold voltage
V
VCC = 3.3 V
VCC = 5 V
0.6
0.8
1.1
VIT–
V
1.4
Vhys
Ioff
ri
Input hysteresis (VIT+ – VIT–
Output leakage current (except ROUT2B) FORCEOFF = 0 V
Input resistance VI = ±3 V or ±25 V
)
0.5
V
±0.05
5
±10
μA
kΩ
3
7
(1) Test conditions are C1–C4 = 0.1 μF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
Switching Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
Propagation delay time, low- to high-level output
Propagation delay time, high- to low-level output
Output enable time
TEST CONDITIONS
CL = 150 pF, See Figure 3
TYP(2) UNIT
tPLH
tPHL
ten
150
150
200
200
50
ns
ns
ns
ns
ns
CL = 150 pF, RL = 3 kΩ, See Figure 4
tdis
Output disable time
Puse skew(3)
tsk(p)
See Figure 3
(1) Test conditions are C1–C4 = 0.1 μF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 μF, C2–C4 = 0.33 μF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
(3) Pulse skew is defined as |tPLH – tPHL| of each channel of the same device.
6
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
AUTO-POWERDOWN SECTION
Electrical Characteristics
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 5)
PARAMETER
TEST CONDITIONS
FORCEOFF = VCC
MIN MAX UNIT
VIT+(valid Receiver input threshold
FORCEON = GND,
FORCEON = GND,
FORCEON = GND,
2.7
V
V
V
for INVALID high-level output voltage
)
VIT–(valid Receiver input threshold
FORCEOFF = VCC
FORCEOFF = VCC
–2.7
for INVALID high-level output voltage
)
VT(invalid Receiver input threshold
–0.3
0.3
0.4
for INVALID low-level output voltage
)
VOH
INVALID high-level output voltage
INVALID low-level output voltage
IOH = -1 mA, FORCEON = GND,
IOL = 1.6 mA, FORCEON = GND,
FORCEOFF = VCC
FORCEOFF = VCC
VCC – 0.6
V
V
VOL
Switching Characteristics
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 5)
PARAMETER
TEST CONDITIONS
TYP(1)
1
UNIT
μs
tvalid
tinvalid
ten
Propagation delay time, low- to high-level output
Propagation delay time, high- to low-level output
Supply enable time
VCC = 5 V
VCC = 5 V
VCC = 5 V
30
μs
100
μs
(1) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
7
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
PARAMETER MEASUREMENT INFORMATION
3 V
0 V
Input
RS-232
Output
Generator
(see Note B)
50 Ω
C
L
t
t
TLH
THL
R
L
(see Note A)
V
V
OH
3 V
−3 V
3 V
FORCEOFF
3 V
−3 V
Output
OL
6 V
tTHL or tTLH
SR(tr) +
TEST CIRCUIT
NOTES: A. C includes probe and jig capacitance.
VOLTAGE WAVEFORMS
L
B. The pulse generator has the following characteristics: PRR = 250 kbit/s (MAX3243C/I) and 1 Mbit/s (MAX3243FC/I),
Z
O
= 50 Ω, 50% duty cycle, t ≤ 10 ns, t ≤ 10 ns.
r
f
Figure 1. Driver Slew Rate
3 V
0 V
Input
1.5 V
1.5 V
RS-232
Output
Generator
(see Note B)
50 Ω
C
L
t
t
PHL
PLH
R
L
(see Note A)
V
V
OH
3 V
FORCEOFF
50%
50%
Output
OL
TEST CIRCUIT
NOTES: A. C includes probe and jig capacitance.
VOLTAGE WAVEFORMS
L
B. The pulse generator has the following characteristics: PRR = 250 kbit/s (MAX3243C/I) and 1 Mbit/s (MAX3243FC/I),
Z
O
= 50 Ω, 50% duty cycle, t ≤ 10 ns, t ≤ 10 ns.
r
f
Figure 2. Driver Pulse Skew
3 V or 0 V
FORCEON
3 V
Input
1.5 V
1.5 V
−3 V
Output
Generator
(see Note B)
t
t
PLH
PHL
50 Ω
C
L
(see Note A)
3 V
FORCEOFF
V
V
OH
50%
50%
Output
OL
TEST CIRCUIT
NOTES: A. C includes probe and jig capacitance.
VOLTAGE WAVEFORMS
L
B. The pulse generator has the following characteristics: Z = 50 Ω, 50% duty cycle, t ≤ 10 ns, t ≤ 10 ns.
O
r
f
Figure 3. Receiver Propagation Delay Times
8
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
PARAMETER MEASUREMENT INFORMATION (continued)
3 V
Input
1.5 V
1.5 V
V
CC
GND
3 V or 0 V
FORCEON
0 V
S1
t
t
PZH
PHZ
(S1 at GND)
(S1 at GND)
R
L
V
OH
3 V or 0 V
Output
50%
Output
0.3 V
C
L
(see Note A)
FORCEOFF
50 Ω
t
t
PZL
(S1 at V
PLZ
(S1 at V
)
CC
)
CC
Generator
(see Note B)
0.3 V
Output
50%
V
OL
TEST CIRCUIT
NOTES: A. C includes probe and jig capacitance.
VOLTAGE WAVEFORMS
L
B. The pulse generator has the following characteristics: Z = 50 Ω, 50% duty cycle, t ≤ 10 ns, t ≤ 10 ns.
O
r
f
C.
D.
t
t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PHZ
PZH
are the same as t
en
Figure 4. Receiver Enable and Disable Times
9
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
PARAMETER MEASUREMENT INFORMATION (continued)
3 V
2.7 V
2.7 V
0 V
0 V
Receiver
Input
−2.7 V
−2.7 V
ROUT
−3 V
Generator
(see Note B)
50 Ω
t
t
valid
invalid
V
CC
50% V
50% V
CC
CC
0 V
INVALID
Output
t
en
Auto-
powerdown
INVALID
C = 30 pF
≈V+
V+
L
(see Note A)
0.3 V
Supply
V
CC
0 V
0.3 V
FORCEOFF
FORCEON
Voltages
DIN
DOUT
≈V−
V−
TEST CIRCUIT
VOLTAGE WAVEFORMS
Valid RS-232 Level, INVALID High
2.7 V
0.3 V
Indeterminate
If Signal Remains Within This Region
For More Than 30 µs, INVALID Is Low (see Note C)
0 V
−0.3 V
Indeterminate
−2.7 V
Valid RS-232 Level, INVALID High
NOTES: A. C includes probe and jig capacitance.
L
B. The pulse generator has the following characteristics: PRR = 5 kbit/s, Z = 50 Ω, 50% duty cycle, t ≤ 10 ns, t ≤ 10 ns.
O
r
f
C. Auto-powerdown disables drivers and reduces supply current to 1 µA.
Figure 5. INVALID Propagation Delay Times and Supply Enabling Time
10
Submit Documentation Feedback
TRS3243
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV ESD (HBM) PROTECTION
www.ti.com
SLLS806–JUNE 2007
APPLICATION INFORMATION
28
C1+
27
1
V+
C2+
C2−
+
−
+
−
(1)
C3
C2
+
−
2
3
C1
26
V
CC
+
−
C
BYPASS
= 0.1 µF
25
24
23
V−
GND
C1−
−
+
C4
4
5
6
7
8
RIN1
FORCEON
FORCEOFF
RIN2
RIN3
22
RS-232 Inputs
RIN4
RIN5
21
20
INVALID
ROUT2B
9
DOUT1
DOUT2
19
18
17
10
ROUT1
ROUT2
RS-232 Outputs
5 kΩ
11
DOUT3
5 kΩ
Logic Outputs
12
13
14
DIN3
DIN2
DIN1
ROUT3
5 kΩ
16
15
Logic Inputs
ROUT4
ROUT5
5 kΩ
5 kΩ
V
CC
vs CAPACITOR VALUES
(1) C3 can be connected to V or GND.
CC
NOTES: A. Resistor values shown are nominal.
V
CC
C1
C2, C3, and C4
B. Nonpolarizedceramic capacitors are acceptable. If polarized tantalum
or electrolytic capacitors are used, they should be connected as
shown.
3.3 V ± 0.3 V
5 V ± 0.5 V
3 V to 5.5 V
0.1 µF
0.047 µF
0.1 µF
0.1 µF
0.33 µF
0.47 µF
Figure 6. Typical Operating Circuit and Capacitor Values
11
Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com
16-Apr-2009
PACKAGING INFORMATION
Orderable Device
TRS3243CDB
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SSOP
DB
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TRS3243CDBG4
TRS3243CDBR
TRS3243CDBRG4
TRS3243CDW
SSOP
SSOP
SSOP
SOIC
DB
DB
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DB
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DW
DW
DW
DW
PW
PW
PW
PW
DB
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TRS3243CDWG4
TRS3243CDWR
TRS3243CDWRG4
TRS3243CPW
SOIC
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
SSOP
SSOP
SSOP
SSOP
SOIC
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TRS3243CPWG4
TRS3243CPWR
TRS3243CPWRG4
TRS3243IDB
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TRS3243IDBG4
TRS3243IDBR
DB
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DB
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TRS3243IDBRG4
TRS3243IDW
DB
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
DW
DW
DW
DW
PW
PW
PW
PW
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TRS3243IDWG4
TRS3243IDWR
TRS3243IDWRG4
TRS3243IPW
SOIC
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TRS3243IPWG4
TRS3243IPWR
TRS3243IPWRG4
50 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
16-Apr-2009
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
TRS3243CDBR
TRS3243CDWR
TRS3243CPWR
TRS3243IDBR
TRS3243IDWR
TRS3243IPWR
SSOP
SOIC
DB
DW
PW
DB
28
28
28
28
28
28
2000
1000
2000
2000
1000
2000
330.0
330.0
330.0
330.0
330.0
330.0
16.4
32.4
16.4
16.4
32.4
16.4
8.2
10.5
2.5
3.1
1.6
2.5
3.1
1.6
12.0
16.0
12.0
12.0
16.0
12.0
16.0
32.0
16.0
16.0
32.0
16.0
Q1
Q1
Q1
Q1
Q1
Q1
11.35 18.67
TSSOP
SSOP
SOIC
7.1
8.2
10.4
10.5
DW
PW
11.35 18.67
7.1 10.4
TSSOP
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
TRS3243CDBR
TRS3243CDWR
TRS3243CPWR
TRS3243IDBR
TRS3243IDWR
TRS3243IPWR
SSOP
SOIC
DB
DW
PW
DB
28
28
28
28
28
28
2000
1000
2000
2000
1000
2000
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
38.0
55.0
38.0
38.0
55.0
38.0
TSSOP
SSOP
SOIC
DW
PW
TSSOP
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Medical
Logic
Security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
TRS3243CPWG4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD (HBM) PROTECTION
TI
TRS3243CPWR
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD (HBM) PROTECTION
TI
TRS3243CPWRG4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD (HBM) PROTECTION
TI
TRS3243ECDBG4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
TRS3243ECDBR
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
TRS3243ECDBRG4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
TRS3243ECDWG4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
TRS3243ECDWR
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
TRS3243ECDWRG4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
©2020 ICPDF网 联系我们和版权申明