TPS658643ZWSR [TI]
Advanced Power Management Unit;
| 型号： | TPS658643ZWSR |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | Advanced Power Management Unit |
| 文件： | 总9页 (文件大小：804K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TPS658643
www.ti.com
SLVSB68 –NOVEMBER 2011
Advanced Power Management Unit
Check for Samples: TPS658643
1 INTRODUCTION
1.1 MAIN FEATURES
12
– Real Time Counter
– 11 Channel ADC With 3 Operating Modes
• INTEGRATED POWER SUPPLIES
– 3 Programmable Step-Down converters
•
•
•
Single Conversion
Peak Detection
Averaging
•
Software Controlled Enable/Forced PWM
Mode
Automatic Power Saving Mode
Maximum 1.5A Outputs (SM0 and SM2)
Maximum 2.A Output (SM1)
•
•
•
1.2 APPLICATIONS
– 11 Programmable General Purpose LDOs
•
•
•
•
•
Tablet PCs
•
•
7 With Output Voltages of 1.25V to 3.3V
Netbooks
2 With Output Voltages of 0.725V to 1.5V
or 1.25V to 2.586V (factory
programmable)
SmartPhones
Portable Navigation Devices
Portable Media Players
•
•
1 “ Always On” With Output Voltages of
1.25V to 3.3V
1 With Output Voltage of 1.7V–2.475V
• DISPLAY SUPPORT FUNCTIONS
– 3 PWM Outputs With Programmable
Frequency and Duty Cycle
– Dual RGB LED Drivers
• HOST INTERFACE
– I2C Bus
– Interrupt Controller With Maskable Interrupts
– GPIO Control (4)
• SYSTEM MANAGEMENT
– Power Good Monitoring on all Supply
Outputs
– Software Reset Function
– Hardware On/Off and Reboot Control
1.3 DESCRIPTION
The TPS658643 provides an easy to use, fully integrated solution for handheld devices, integrating
multiple regulated power supplies, system management and display functions in a small package. The I2C
interface enables control of a wide range of subsystem parameters. Internal registers have a complete set
of status information, enabling easy diagnostics and host-controlled handling of fault conditions.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
MicroStar BGA is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date. Products conform to
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated
To request a full data sheet, please send an email to:
nvidia_contact@list.ti.com.
PACKAGE OPTION ADDENDUM
www.ti.com
14-Nov-2020
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
1000
250
(1)
(2)
(3)
(4/5)
(6)
TPS658643ZGUR
TPS658643ZGUT
TPS658643ZQZR
ACTIVE
BGA
MICROSTAR
ZGU
169
169
120
Green (RoHS
& no Sb/Br)
SNAGCU
Level-3-260C-168 HR
Level-3-260C-168 HR
Level-3-260C-168 HR
-40 to 85
-40 to 85
-40 to 85
TPS658643
LIFEBUY
LIFEBUY
BGA
MICROSTAR
ZGU
Green (RoHS
& no Sb/Br)
SNAGCU
SNAGCU
TPS658643
TPS658643
BGA
ZQZ
2500
Green (RoHS
& no Sb/Br)
MICROSTAR
JUNIOR
TPS658643ZQZT
TPS658643ZWSR
LIFEBUY
BGA
MICROSTAR
JUNIOR
ZQZ
120
169
250
Green (RoHS
& no Sb/Br)
SNAGCU
SNAGCU
Level-3-260C-168 HR
Level-3-260C-168 HR
-40 to 85
-40 to 85
TPS658643
658643ZWS
PREVIEW
NFBGA
ZWS
1000
Green (RoHS
& no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
14-Nov-2020
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Jan-2020
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
TPS658643ZQZR
BGA MI
CROSTA
R JUNI
OR
ZQZ
120
2500
330.0
16.4
6.3
6.3
1.5
12.0
16.0
Q1
TPS658643ZQZT
BGA MI
CROSTA
R JUNI
OR
ZQZ
120
250
330.0
16.4
6.3
6.3
1.5
12.0
16.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Jan-2020
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
TPS658643ZQZR
BGA MICROSTAR
JUNIOR
ZQZ
120
2500
336.6
336.6
31.8
TPS658643ZQZT
BGA MICROSTAR
JUNIOR
ZQZ
120
250
336.6
336.6
31.8
Pack Materials-Page 2
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third
party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,
damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on
ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable
warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2020, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明