TLE2426CDR [TI]
The ''Rail Splitter'' Precision Virtual Ground 8-SOIC;
| 型号： | TLE2426CDR |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | The ''Rail Splitter'' Precision Virtual Ground 8-SOIC |
| 文件： | 总22页 (文件大小：345K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
1/2 V Virtual Ground for Analog Systems
I
Self-Contained 3-terminal TO-226AA
Package
Excellent Output Regulation
– –45 µV Typ at I = 0 to –10 mA
O
– +15 µV Typ at I = 0 to +10 mA
O
Low-Impedance Output . . . 0.0075 Ω Typ
Micropower Operation . . . 170 µA Typ,
V = 5 V
Noise Reduction Pin (D, JG, and P
Packages Only)
I
Wide V Range . . . 4 V to 40 V
I
High Output-Current Capability
– Source . . . 20 mA Typ
– Sink . . . 20 mA Typ
INPUT/OUTPUT TRANSFER CHARACTERISTICS
10
V
I
V
I
V
O
V
I
description
V
8
6
4
O
2
In signal-conditioning applications utilizing a
single power source, a reference voltage equal to
one-half the supply voltage is required for
termination of all analog signal grounds. Texas
Instruments presents a precision virtual ground
whose output voltage is always equal to one-half
the input voltage, the TLE2426 “rail splitter.”
V
O
The unique combination of a high-performance,
micropower operational amplifier and a precision-
trimmed divider on a single silicon chip results in
2
0
a precise V /V ratio of 0.5 while sinking and
O
I
sourcing current. The TLE2426 provides a low-
impedance output with 20 mA of sink and source
capability while drawing less than 280 µA
0
0.25
0.5
0.75
1
t – Time – s
of supply current over the full input range of 4 V to 40 V. A designer need not pay the price in terms of board
space for a conventional signal ground consisting of resistors, capacitors, operational amplifiers, and voltage
references. The performance and precision of the TLE2426 is available in an easy-to-use, space saving,
3-terminal LP package. For increased performance, the optional 8-pin packages provide a noise-reduction pin.
With the addition of an external capacitor (C ), peak-to-peak noise is reduced while line ripple rejection is
NR
improved.
Initial output tolerance for a single 5-V or 12-V system is better than 1% with 3.6% over the full 40-V input range.
Ripple rejection exceeds 12 bits of accuracy. Whether the application is for a data acquisition front end, analog
signal termination, or simply a precision voltage reference, the TLE2426 eliminates a major source of system
error.
AVAILABLE OPTIONS
PACKAGED DEVICES
CHIP
SMALL
OUTLINE
(D)
CERAMIC
DIP
PLASTIC
DIP
FORM
(Y)
PLASTIC
(LP)
T
A
(JG)
(P)
0°C to 70°C
–40°C to 85°C
–55°C to 125°C
TLE2426CD
TLE2426ID
TLE2426MD
—
—
TLE2426CLP
TLE2426ILP
TLE2426MLP
TLE2426CP
TLE2426IP
TLE2426MP
TLE2426Y
TLE2426MJG
The D and LP packages are available taped and reeled in the commercial temperature range only. Add R suffix
to the device type (e. g., TLC2426CDR). Chips are tested at 25°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
description (continued)
The C-suffix devices are characterized for operation from 0°C to 70°C. The I suffix devices are characterized
foroperationfrom–40°Cto85°C. TheMsuffixdevicesarecharacterizedoverthefullmilitarytemperaturerange
of –55°C to 125°C.
LP PACKAGE
(TOP VIEW)
D, JG, OR P PACKAGE
(TOP VIEW)
OUT
COMMON
IN
NOISE REDUCTION
1
2
3
4
8
7
6
5
IN
NC
NC
NC
COMMON
OUT
NC
NC – No internal connection
TLE2426Y chip information
This chip, properly assembled, displays characteristics similar to the TLE2426C. Thermal compression or
ultrasonic bonding may be used on the doped aluminum bonding pads. The chips may be mounted with
conductive epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(2) (2)
(3)
(1)
(1)
(3)
IN
(3)
CHIP THICKNESS:
15 MILS TYPICAL
BONDING PADS:
4 × 4 MILS MINIMUM
(8)
(1)
NOISE
REDUCTION
OUT
+1
T max = 150°C
J
60
TOLERANCES ARE ±10%.
(2)
COMMON
ALL DIMENSIONS ARE IN
MILS.
(8)
NOTE A: Both bonding pads numbered 1, both numbered 2,
and both numbered 3, must be bonded out to the
corresponding functions pin.
88
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
†
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Continuous input voltage, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
I
Continuous filter trap voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
Output current, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±80 mA
O
Duration of short-circuit current at (or below) 25°C (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, T : C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
A
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to 125°C
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG or LP package . . . . . . . . . . . . . . 300°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: Theoutput may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation
rating is not exceeded.
DISSIPATION RATING TABLE
T
≤ 25°C
DERATING FACTOR
T
= 70°C
T
= 85°C
T = 125°C
A
A
A
A
PACKAGE
POWER RATING
ABOVE T = 25°C
POWER RATING POWER RATING POWER RATING
A
D
JG
LP
P
725 mV
1050 mV
775 mV
5.8 mW/°C
8.4 mW/°C
6.2 mW/°C
8.0 mW/°C
464 mW
672 mW
496 mW
640 mW
377 mW
546 mW
403 mW
520 mW
145 mW
210 mW
155 mW
200 mW
1000 mV
recommended operating conditions
C SUFFIX
I SUFFIX
M SUFFIX
UNIT
MIN
4
MAX
40
MIN
4
MAX
40
MIN
4
MAX
Input voltage, V
40
V
I
Operating free-air temperature, T
0
70
–40
85
–55
125
°C
A
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
electrical characteristics at specified free-air temperature, V = 5 V, I = 0 (unless otherwise noted)
I
O
TLE2426C
†
PARAMETER
TEST CONDITIONS
T
A
UNIT
MIN
1.98
TYP
2
MAX
2.02
V = 4 V
I
V = 5 V
25°C
2.48
2.5
20
2.52
I
Output voltage
V
V = 40 V
I
19.8
20.2
V = 5 V
I
Full range
Full range
25°C
2.475
2.525
Temperature coefficient of output voltage
Supply current
25
ppm/°C
µA
V = 5 V
170
300
400
I
No load
V = 4 to 40 V
I
Full range
25°C
–45 ±160
±250
I
O
I
O
I
O
I
O
= 0 to –10 mA
= 0 to –20 mA
= 0 to 10 mA
= 0 to 20 mA
Output voltage regulation
(sourcing current)
Full range
25°C
µV
µV
‡
–150 ±450
15 ±160
±250
25°C
Output voltage regulation
Full range
25°C
‡
(sinking current)
65 ±235
Output impedance
25°C
7.5
110
26
22.5
mΩ
kΩ
Noise-reduction impedance
25°C
Sinking current,
Sourcing current,
V
= 5 V
= 0
O
Short-circuit current
25°C
25°C
25°C
25°C
25°C
mA
V
C
C
C
C
C
C
–47
120
30
O
= 0
NR
NR
Output noise voltage, rms
f = 10 Hz to 10 kHz
µV
= 1 µF
= 0
290
275
400
390
20
L
L
L
L
V
V
to 0.1%,
I
= ±10 mA
O
O
= 100 pF
= 0
Output voltage current step response
Step response
µs
µs
to 0.01%, I = ±10 mA
O
O
= 100 pF
V = 0 to 5 V, V to 0.1%
I
O
C
= 100 pF
L
V = 0 to 5 V, V to 0.01%
160
I
O
†
‡
Full range is 0°C to 70°C.
The listed values are not production tested.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
electrical characteristics at specified free-air temperature, V = 12 V, I = 0 (unless otherwise noted)
I
O
TLE2426C
†
PARAMETER
TEST CONDITIONS
T
A
UNIT
MIN
1.98
TYP
2
MAX
2.02
V = 4 V
I
V = 12 V
25°C
5.95
6
6.05
I
Output voltage
V
V = 40 V
I
19.8
20
20.2
V = 12 V
I
Full range
Full range
25°C
5.945
6.055
Temperature coefficient of output voltage
Supply current
35
ppm/°C
µA
V = 12 V
195
300
400
I
No load
V = 4 to 40 V
I
Full range
25°C
–45 ±160
±250
I
O
I
O
I
O
I
O
= 0 to –10 mA
= 0 to –20 mA
= 0 to 10 mA
= 0 to 20 mA
Output voltage regulation
(sourcing current)
Full range
25°C
µV
µV
‡
–150 ±450
15 ±160
±250
25°C
Output voltage regulation
Full range
25°C
‡
(sinking current)
65 ±235
Output impedance
25°C
7.5
110
31
22.5
mΩ
kΩ
Noise-reduction impedance
25°C
Sinking current,
Sourcing current,
V
V
= 12 V
= 0
O
Short-circuit current
25°C
25°C
25°C
25°C
25°C
mA
–70
120
30
O
C
= 0
NR
NR
Output noise voltage, rms
f = 10 Hz to 10 kHz
µV
C
C
C
C
C
= 1 µF
= 0
290
275
400
390
20
L
L
L
L
V
V
to 0.1%,
I
I
= ±10 mA
= ±10 mA
O
O
= 100 pF
= 0
Output voltage current step response
Step response
µs
µs
to 0.01%,
O
O
= 100 pF
V = 0 to 12 V, V to 0.1%
I
O
C
= 100 pF
L
V = 0 to 12 V, V to 0.01%
120
I
O
†
‡
Full range is 0°C to 70°C.
The listed values are not production tested.
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
electrical characteristics at specified free-air temperature, V = 5 V, I = 0 (unless otherwise noted)
I
O
TLE2426I
†
PARAMETER
TEST CONDITIONS
T
A
UNIT
MIN
1.98
2.48
19.8
2.47
TYP
2
MAX
2.02
2.52
20.2
2.53
V = 4 V
I
V = 5 V
I
25°C
2.5
20
Output voltage
V
V = 40 V
I
V = 5 V
I
Full range
Full range
Temperature coefficient of output volt-
age
25
ppm/°C
µA
V = 5 V
I
25°C
Full range
25°C
170
300
400
Supply current
No load
V = 4 to 40 V
I
–45 ±160
±250
I
O
= 0 to –10 mA
Output voltage regulation
Full range
25°C
µV
µV
‡
(sourcing current)
I
O
I
O
I
O
I
O
= 0 to –20 mA
= 0 to 10 mA
= 0 to 8 mA
–150 ±450
15 ±160
±250
25°C
Output voltage regulation
Full range
25°C
‡
(sinking current)
= 0 to 20 mA
65 ±235
Output impedance
25°C
7.5
110
26
22.5
mΩ
kΩ
Noise-reduction impedance
25°C
Sinking current,
Sourcing current,
V
V
= 5 V
= 0
O
Short-circuit current
25°C
25°C
25°C
25°C
25°C
mA
–47
120
30
O
C
C
C
C
C
C
= 0
NR
NR
Output noise voltage, rms
f = 10 Hz to 10 kHz
µV
= 1 µF
= 0
290
275
400
390
20
L
L
L
L
V
V
to 0.1%,
I
I
= ±10 mA
= ±10 mA
O
O
= 100 pF
= 0
Output voltage current step response
µs
µs
to 0.01%,
O
O
= 100 pF
V = 0 to 5 V,
V
V
to 0.1%
I
O
O
Step response
C
= 100 pF
L
V = 0 to 5 V,
I
to 0.01%
160
†
‡
Full range is –40°C to 85°C.
The listed values are not production tested.
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
electrical characteristics at specified free-air temperature, V = 12 V, I = 0 (unless otherwise noted)
I
O
TLE2426I
†
PARAMETER
TEST CONDITIONS
T
A
UNIT
MIN
1.98
TYP
2
MAX
2.02
V = 4 V
I
V = 12 V
25°C
5.95
6
6.05
I
Output voltage
V
V = 40 V
I
19.8
20
20.2
V = 12 V
I
Full range
Full range
25°C
5.935
6.065
Temperature coefficient of output voltage
Supply current
35
ppm/°C
µA
V = 12 V
195
300
400
I
No load
V = 4 to 40 V
I
Full range
25°C
–45 ±160
±250
I
O
= 0 to –10 mA
Output voltage regulation
(sourcing current)
Full range
25°C
µV
µV
‡
I
O
I
O
I
O
I
O
= 0 to –20 mA
= 0 to 10 mA
= 0 to 8 mA
–150 ±450
15 ±160
±250
25°C
Output voltage regulation
Full range
25°C
‡
(sinking current)
= 0 to 20 mA
65 ±235
Output impedance
25°C
7.5
110
31
22.5
mΩ
kΩ
Noise-reduction impedance
25°C
Sinking current,
Sourcing current,
V
V
= 12 V
= 0
O
Short-circuit current
25°C
25°C
25°C
25°C
25°C
mA
–70
120
30
O
C
C
C
C
C
C
= 0
NR
NR
Output noise voltage, rms
f = 10 Hz to 10 kHz
µV
= 1 µF
= 0
290
275
400
390
20
L
L
L
L
V
V
to 0.1%,
I
= ±10 mA
= ±10 mA
O
O
= 100 pF
= 0
Output voltage current step response
Step response
µs
µs
to 0.01%,
I
O
O
= 100 pF
V = 0 to 12 V, V to 0.1%
I
O
C
= 100 pF
L
V = 0 to 12 V, V to 0.01%
120
I
O
†
‡
Full range is –40°C to 85°C.
The listed values are not production tested.
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
electrical characteristics at specified free-air temperature, V = 5 V, I = 0 (unless otherwise noted)
I
O
TLE2426M
†
PARAMETER
TEST CONDITIONS
T
UNIT
A
MIN
TYP
2
MAX
2.02
V = 4 V
1.98
2.48
I
V = 5 V
I
25°C
2.5
20
2.52
Output voltage
V
V = 40 V
I
19.8
20.2
V = 5 V
I
Full range
Full range
25°C
2.465
2.535
Temperature coefficient of output voltage
Supply current
25
ppm/°C
µA
V = 5 V
170
300
400
I
No load
V = 4 to 40 V Full range
I
25°C
Full range
25°C
–45 ±160
±250
I
= 0 to –10 mA
Output voltage regulation
(sourcing current)
O
µV
µV
‡
I
O
I
O
I
O
I
O
= 0 to –20 mA
= 0 to 10 mA
= 0 to 3 mA
–150 ±450
15 ±160
±250
25°C
Output voltage regulation
Full range
25°C
‡
(sinking current)
= 0 to 20 mA
65 ±235
Output impedance
25°C
7.5
110
26
22.5
mΩ
kΩ
Noise-reduction impedance
25°C
Sinking current,
Sourcing current,
V
V
= 5 V
= 0
O
Short-circuit current
25°C
25°C
25°C
25°C
25°C
mA
–47
120
30
O
C
C
C
C
C
C
= 0
NR
NR
Output noise voltage, rms
f = 10 Hz to 10 kHz
µV
= 1 µF
= 0
290
275
400
390
20
L
L
L
L
V
V
to 0.1%,
I
I
= ±10 mA
= ±10 mA
O
O
= 100 pF
= 0
Output voltage current step response
Step response
µs
µs
to 0.01%,
O
O
= 100 pF
V = 0 to 5 V,
V
V
to 0.1%
I
O
O
C
= 100 pF
L
V = 0 to 5 V,
I
to 0.01%
120
†
‡
Full range is –55°C to 125°C.
The listed values are not production tested.
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
electrical characteristics at specified free-air temperature, V = 12 V, I = 0 (unless otherwise noted)
I
O
TLE2426M
†
PARAMETER
TEST CONDITIONS
T
UNIT
A
MIN
TYP
2
MAX
2.02
V = 4 V
1.98
5.95
I
V = 12 V
I
25°C
6
6.05
Output voltage
V
V = 40 V
I
19.8
20
20.2
V = 12 V
I
Full range
Full range
25°C
5.925
6.075
Temperature coefficient of output voltage
Supply current
35
ppm/°C
µA
V = 12 V
195
250
350
I
No load
V = 4 to 40 V Full range
I
25°C
Full range
25°C
–45 ±160
±250
I
= 0 to –10 mA
Output voltage regulation
(sourcing current)
O
µV
µV
‡
I
O
I
O
I
O
I
O
= 0 to –20 mA
= 0 to 10 mA
= 0 to 8 mA
–150 ±450
15 ±160
±250
25°C
Output voltage regulation
Full range
25°C
‡
(sinking current)
= 0 to 20 mA
65 ±235
Output impedance
25°C
7.5
110
31
22.5
mΩ
kΩ
Noise-reduction impedance
25°C
Sinking current,
Sourcing current,
V
V
= 12 V
= 0
O
Short-circuit current
25°C
25°C
25°C
25°C
25°C
mA
–70
120
30
O
C
C
C
C
C
C
= 0
NR
NR
Output noise voltage, rms
f = 10 Hz to 10 kHz
µV
= 1 µF
= 0
290
275
400
390
12
L
L
L
L
V
V
to 0.1%,
I
= ±10 mA
= ±10 mA
O
O
= 100 pF
= 0
Output voltage current step response
Step response
µs
µs
to 0.01%,
I
O
O
= 100 pF
V = 0 to 12 V, V to 0.1%
I
O
C
= 100 pF
L
V = 0 to 12 V, V to 0.01%
120
I
O
†
‡
Full range is –55°C to 125°C.
The listed values are not production tested.
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
electrical characteristics at specified free-air temperature, V = 5 V, I = 0, T = 25°C (unless
I
O
A
otherwise noted)
TLE2426Y
TYP
2.5
PARAMETER
TEST CONDITIONS
UNIT
MIN
MAX
Output voltage
Supply current
V = 5 V
I
V
No load
170
–45
–150
15
µA
I
O
I
O
I
O
I
O
= 0 to –10 mA
†
Output voltage regulation (sourcing current)
µV
µV
= 0 to –20 mA
= 0 to 10 mA
= 0 to 20 mA
†
Output voltage regulation (sinking current)
65
Output impedance
7.5
mΩ
kΩ
Noise-reduction impedance
110
26
Sinking current,
Sourcing current,
V
V
= 5 V
= 0
O
Short-circuit current
mA
–47
120
30
O
C
= 0
NR
NR
Output noise voltage, rms
f = 10 Hz to 10 kHz
µV
C
C
C
C
C
= 1 µF
= 0
290
275
400
390
20
L
L
L
L
V
V
to 0.1%,
I
I
= ±10 mA
= ±10 mA
O
O
= 100 pF
= 0
Output voltage current step response
Step response
µs
µs
to 0.01%,
O
O
= 100 pF
V = 0 to 5 V,
I
V = 0 to 5 V,
I
V
V
to 0.1%
O
O
C
= 100 pF
L
to 0.01%
160
†
The listed values are not production tested.
electrical characteristics at specified free-air temperature, V = 12 V, I = 0, T = 25°C (unless
I
O
A
otherwise noted)
TLE2426Y
TYP
6
PARAMETER
TEST CONDITIONS
UNIT
MIN
MAX
Output voltage
Supply current
V = 12 V
I
V
No load
195
–45
–150
15
µA
I
O
I
O
I
O
I
O
= 0 to –10 mA
†
Output voltage regulation (sourcing current)
µV
µV
= 0 to –20 mA
= 0 to 3 mA
†
Output voltage regulation (sinking current)
= 0 to 20 mA
65
Output impedance
7.5
mΩ
kΩ
Noise-reduction impedance
110
31
Sinking current,
Sourcing current,
V
V
= 12 V
= 0
O
Short-circuit current
mA
–70
120
30
O
C
C
C
C
C
C
= 0
NR
NR
Output noise voltage, rms
f = 10 Hz to 10 kHZ
µV
= 1 µF
= 0
290
275
400
390
12
L
L
L
L
V
to 0.1%,
I
= ±10 mA
= ±10 mA
O
O
O
O
= 100 pF
= 0
Output voltage current, step response
Step response
µs
µs
V
to 0.01%,
I
= 100 pF
V = 0 to 12 V,
I
V = 0 to 12 V,
I
V
V
to 0.1%
O
O
C
= 100 pF
L
to 0.01%
120
†
The listed values are not production tested.
10
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
TYPICAL CHARACTERISTICS
Table Of Graphs
FIGURE
Output voltage
Distribution
1,2
Output voltage change
Output voltage error
vs Free-air temperature
3
4
vs Input voltage
vs Input voltage
5
Input bias current
vs Free-air temperature
6
Output voltage regulation
Output impedance
vs Output current
vs Frequency
vs Input voltage
vs Free-air temperature
vs Frequency
vs Frequency
vs Time
7
8
9,10
11,12
13
14
15
16
17
Short-circuit output current
Ripple rejection
Spectral noise voltage density
Output voltage response to output current step
Output voltage power-up response
Output current
vs Time
vs Load capacitance
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
†
TYPICAL CHARACTERISTICS
DISTRIBUTION
OF
DISTRIBUTION
OF
OUTPUT VOLTAGE
OUTPUT VOLTAGE
3
2.5
2
40
30
20
98 Units Tested
From 2 Wafer Lots
98 Units Tested
From 2 Wafer Lots
V = 5 V
V = 12 V
I
I
T
A
= 25°C
T
= 25°C
A
1.5
1
10
0
0.5
0
2.48
2.49
2.5
2.51
2.52
6
6.025
6.05
6.075
6.1
V
O
– Output Voltage – V
V
O
– Output Voltage – V
Figure 1
Figure 2
OUTPUT VOLTAGE ERROR
OUTPUT VOLTAGE CHANGE
vs
vs
INPUT VOLTAGE
FREE-AIR TEMPERATURE
4
3
2
150
75
I
T
= 0
= 25°C
O
A
V = 40 V
I
I
O
= 0
Error Equals V /V Deviation From 50%
O
I
V = 12 V
I
0
V = 4 V, 5 V
I
1
0
–75
–1
–150
0
4
8
12 16 20 24 28 32 36 40
0
25
50
75
100 125
–75 –50 –25
T
A
– Free-Air Temperature – °C
V – Input Voltage – V
I
Figure 3
Figure 4
†
Data at high and low temperatures are applicable within the rated operating free-air temperature ranges of the various devices.
12
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
†
TYPICAL CHARACTERISTICS
INPUT BIAS CURRENT
INPUT BIAS CURRENT
vs
vs
INPUT VOLTAGE
FREE-AIR TEMPERATURE
300
250
300
250
200
150
100
50
I
O
= 0
V = 40 V
I
T
= 25°C
A
V = 12 V
I
200
150
100
50
T
A
= –55°C
V = 5 V
I
V = 4 V
I
T
A
= 125°C
I
O
= 0
0
0
0
5
10
15
20
25
30
35
40
–75 –50 –20
0
25
50
75
100 125
V – Input Voltage – V
I
T
A
– Free-Air Temperature – °C
Figure 5
Figure 6
OUTPUT VOLTAGE REGULATION
OUTPUT IMPEDANCE
vs
vs
OUTPUT CURRENT
FREQUENCY
500
250
0
100
10
1
V = 5 V or 12 V
V = 5 V or 12 V
I
I
I
T
= 0
T
A
= 25°C
O
Max
= 25°C
A
Max
Typ
0.1
0.01
Min
–250
–500
Min
0.001
10
100
1 k
10 k
100 k
1 M
–20
–10
0
10
20
f – Frequency – Hz
I
O
– Output Current – mA
Figure 7
Figure 8
†
Data at high and low temperatures are applicable within the rated operating free-air temperature ranges of the various devices.
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
†
TYPICAL CHARACTERISTICS
SHORT-CIRCUIT OUTPUT CURRENT
SHORT-CIRCUIT OUTPUT CURRENT
vs
vs
INPUT VOLTAGE
INPUT VOLTAGE
40
0
V
= GND
O
(Output Sourcing)
T
A
= 25°C
T
= –55°C
–20
A
30
20
T
A
= 125°C
–40
–60
–80
T
= –55°C
A
10
0
V
= V
I
O
(Output Sinking)
T
A
= 125°C
T
= 25°C
A
0
5
10
15
20
25
30
35
40
0
5
10
15
20
25
30
35
40
V – Input Voltage – V
I
V – Input Voltage – V
I
Figure 9
Figure 10
SHORT-CIRCUIT OUTPUT CURRENT
SHORT-CIRCUIT OUTPUT CURRENT
vs
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
0
40
V = 40 V
I
V
= GND
O
V = 4 V
–10
–20
I
(Output Sourcing)
V = 12 V
I
30
20
V = 5 V
I
–30
–40
V = 4 V
I
V = 5 V
I
–50
–60
V = 12 V
I
10
0
V
O
= V
I
–70
–80
V = 40 V
I
(Output Sinking)
–75 –50 –25
0
25
50
75
100 125
–75 –50 –25
0
25
50
75
100 125
T
A
– Free-Air Temperature – °C
T
A
– Free-Air Temperature – °C
Figure 11
Figure 12
†
Data at high and low temperatures are applicable within the rated operating free-air temperature ranges of the various devices.
14
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
TYPICAL CHARACTERISTICS
RIPPLE REJECTION
vs
SPECTRAL NOISE VOLTAGE DENSITY
vs
FREQUENCY
FREQUENCY
400
300
200
100
90
80
70
60
50
40
30
V = 5 V or 12 V
I
V = 5 V or 12 V
I
T
= 25°C
A
∆V
= 1 V
I(PP)
= 0
C
= 1 µF
NR
I
O
T
= 25°C
A
100
0
20
10
0
C
= 0
NR
C
= 0
NR
C
= 1 µF
NR
10
100
1 k
10 k
100 k
1 M
1
10
100
1 k
10 k
100 k
f – Frequency – Hz
f – Frequency – Hz
Figure 13
Figure 14
OUTPUT VOLTAGE RESPONSE
TO OUTPUT CURRENT STEP
OUTPUT VOLTAGE POWER-UP RESPONSE
3
2.5
2
1.5 V
0.1%
Output Voltage Response
0.01%
4
3
2
1
V = 5 V
I
C
= 100 pF
L
T
= 25°C
A
0.1%
1.5
1
I
C
= 0
O
0.01%
= 100 pF
= 25°C
0
L
0.01%
T
A
–1
0.5
–2
10 mA
Step
0
5
0.1%
I
O
–3
Input Voltage Step
–4
–10 mA
0
–1.5 V
0
50
100
150
200
0
1000
2000
3000
4000
Time – µs
Time – µs
Figure 15
Figure 16
15
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
TYPICAL CHARACTERISTICS
STABILITY RANGE
OUTPUT CURRENT
vs
LOAD CAPACITANCE
20
V = 5 V
I
Unstable
15
10
T
= 25°C
A
5
0
Stable
–5
–10
–15
–20
1
2
10
–6 –5
10 10
–4
–2
0
–3
–1
10
10
10
10
10
F
10
C – Load Capacitance –
L
Figure 17
16
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
MACROMODEL INFORMATION
*
*
*
*
TLE2426 OPERATIONAL AMPLIFIER “MACROMODEL” SUBCIRCUIT
CREATED USING PARTS RELEASE 4.03 0N 08/21/90 AT 13:51
REV (N/A)
SUPPLY VOLTAGE: 5 V
FILTER
CONNECTIONS:
|
|
|
|
1
INPUT
*
*
*
|
|
|
3
COMMON
|
|
4
OUTPUT
|
5
.SUBCKT TLE2426
C1
11 12 21.66E–12
C2
6
7 30.00E–12
C3
CPSR
DCM+ 81 82 DX
DCM– 83 81 DX
DC
DE
DLP
DLN
DP
87 0 10.64E–9
85 86 15.9E–9
5 53 DX
54 5 DX
90 91 DX
92 90 DX
4
3 DX
ECMR
EGND
EPSR
ENSE
FB
84 99 (2,99) 1
99 0 POLY(2)
85 0 POLY(1)
89 2 POLY(1)
7 99 POLY(6)
(3,0) (4,0)
0
.5 .5
(3,4) –16.22E–6 3.24E–6
(88,0) 120E–61
VB VC VE VLPVLNVPSR 0 74.8E6 –10E6 10E6
0 11 12 320.4E–6
10E6
–10E6 74E6
GA
6
GCM
GPSR
GRC1
GRC2
GRE1
GRE2
HLIM
HCMR
IRP
IEE
IIO
I1
0
6 10 99 1.013E–9
85 86 (85,86)
100E–6
4 11 (4,11) 3.204E–4
4 12 (4,12) 3.204E–4
13 10 (13,10)
14 10 (14,10)
1.038E–3
1.038E–3
90 0 VLIM
1K
80 1 POLY(2)
VCM+
VCM–
0
1E2
1E2
3
4 146E–6
3 10 DC 24.05E–6
0 .2E–9
2
88 0 1E–21
11 89 13 QX
12 80 14 QX
Q1
Q2
R2
6
9 100.0E3
RCM
REE
RN1
RN2
RO1
RO2
84 81 1K
10 99 8.316E6
87
0
2.55E8
87 88 11.67E3
5 63
7 99 62
8
VCM+ 82 99 1.0
VCM– 83 99 –2.3
VB
9
0 DC 0
VC
3 53 DC 1.400
54 4 DC 1.400
VE
VLIM
VLP
VLN
VPSR
RFB
RIN1
RIN2
7
8 DC 0
91 0 DC 30
0 92 DC 30
0 86 DC 0
5
3
1
2 1K
1 220K
4 220K
.MODEL DX D(IS=800.OE–18)
.MODEL QX PNP(IS=800.OE–18BF=480)
.ENDS
17
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
MECHANICAL INFORMATION
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
0.050 (1,27)
0.020 (0,51)
0.014 (0,35)
0.010 (0,25)
M
14
8
0.008 (0,20) NOM
0.244 (6,20)
0.228 (5,80)
0.157 (4,00)
0.150 (3,81)
Gage Plane
0.010 (0,25)
1
7
0°–8°
0.044 (1,12)
A
0.016 (0,40)
Seating Plane
0.004 (0,10)
0.010 (0,25)
0.004 (0,10)
0.069 (1,75) MAX
PINS **
8
14
16
DIM
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MAX
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
A MIN
4040047/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
D. Falls within JEDEC MS-012
18
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
MECHANICAL INFORMATION
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE PACKAGE
0.400 (10,20)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
0.130 (3,30) MIN
Seating Plane
0.063 (1,60)
0.015 (0,38)
0°–15°
0.023 (0,58)
0.015 (0,38)
0.100 (2,54)
0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification only on press ceramic glass frit seal only.
E. Falls within MIL-STD-1835 GDIP1-T8
19
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
MECHANICAL INFORMATION
LP (O-PBCY-W3)
PLASTIC CYLINDRICAL PACKAGE
0.022 (0,56)
Wide
0.016 (0,41)
0.165 (4,19)
0.125 (3,17)
3 Leads
0.016 (0,41)
0.014 (0,35)
Thick
0.105 (2,67)
0.080 (2,03)
Seating Plane
0.055 (1,40)
0.045 (1,14)
0.050 (1,27)
(see Note C)
0.105 (2,67)
0.095 (2,41)
0.135 (3,43) MIN
3
2
1
0.205 (5,21)
0.175 (4,44)
DIA
0.105 (2,67)
0.080 (2,03)
0.210 (5,34)
0.170 (4,32)
0.500 (12,70) MIN
4040001/B 01/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Lead dimensions are not controlled within this area.
D. Falls within JEDEC TO-226AA (TO-226AA replaces TO-92)
20
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLE2426, TLE2426Y
THE “RAIL SPLITTER”
PRECISION VIRTUAL GROUND
SLOS098D – AUGUST 1991 – REVISED MAY 1998
MECHANICAL INFORMATION
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE PACKAGE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.125 (3,18) MIN
0.100 (2,54)
0°–15°
0.021 (0,53)
0.015 (0,38)
0.010 (0,25)
M
0.010 (0,25) NOM
4040082/B 03/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
21
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明