TL3016CD [TI]
ULTRA-FAST LOW-POWER PRECISION COMPARATORS; 超快低功耗精密比较
| 型号： | TL3016CD |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | ULTRA-FAST LOW-POWER PRECISION COMPARATORS |
| 文件： | 总12页 (文件大小：201K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
D AND PW PACKAGE
(TOP VIEW)
Ultrafast Operation . . . 7.6 ns (Typ)
Low Positive Supply Current
10.6 mA (Typ)
V
V
Q OUT
1
2
3
4
8
7
6
5
CC+
IN+
Operates From a Single 5-V Supply or From
a Split ±5-V Supply
Q OUT
IN–
GND
LATCH ENABLE
Complementary Outputs
CC–
Low Offset Voltage
No Minimum Slew Rate Requirement
Output Latch Capability
symbol (each comparator)
Functional Replacement to the LT1016
IN+
IN–
description
Q OUT
Q OUT
The TL3016 is an ultrafast comparator designed
to interface directly to TTL logic while operating
from either a single 5-V power supply or dual
±5-V supplies. It features extremely tight offset
voltage and high gain for precision applications. It
has complementary outputs that can be latched
using the LATCH ENABLE terminal. Figure 1
shows the positive supply current of this
comparator. The TL3016 only requires 10.6 mA
(typical) to achieve a propagation delay of 7.6 ns.
POSITIVE SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
15
14
V
CC
= ± 5 V
13
12
The TL3016 is a pin-for-pin functional replace-
ment for the LT1016 comparator, offering higher
speed operation but consuming half the power.
11
AVAILABLE OPTIONS
10
9
PACKAGED DEVICES
CHIP
SMALL
OUTLINE
(D)
‡
T
A
FORM
(Y)
TSSOP
(PW)
†
8
0°C to 70°C
TL3016CD
TL3016ID
TL3016CPWLE
TL3016IPWLE
TL3016Y
—
7
–40°C to 85°C
6
5
†
‡
The PW packages are available left-ended taped and reeled only.
Chip forms are tested at T = 25°C only.
A
– 50 – 25
0
25
50
75
100
125
T
A
– Free-Air Temperature – °C
Figure 1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
TL3016Y chip information
This chip displays characteristics similar to the TL3016C. Thermal compression or ultrasonic bonding may be
used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon
preform.
BONDING PAD ASSIGNMENTS
V
CC+
(1)
(5)
LATCH ENABLE
(1)
(1)
(8)
(2)
(3)
(8)
IN+
IN–
+
–
(1)
(2)
Q OUT
Q OUT
(7)
(7)
(6)
(4)
(6)
V
CC–
GND
55
CHIP THICKNESS: 10 MILS TYPICAL
BONDING PADS: 4 × 4 MILS MINIMUM
max = 150°C
(3)
(6)
(6)
T
J
TOLERANCES ARE ±10%.
(5)
(4)
ALL DIMENSIONS ARE IN MILS.
TERMINALS 1 AND 6 CAN BE
CONNECTED TO MULTIPLE PADS.
63
COMPONENT COUNT
Bipolars
53
49
46
14
MOSFETs
Resistors
Capacitors
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 7 V to 7 V
DD
Differential input voltage, V (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage range, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
ID
I
Input voltage, V (LATCH ENABLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
I
Output current, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 mA
O
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C
A
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
stg
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.
2. Differential voltages are at IN+ with respect to IN–.
DISSIPATION RATING TABLE
T
≤ 25°C
DERATING FACTOR
T = 70°C
A
POWER RATING
A
PACKAGE
POWER RATING
ABOVE T = 25°C
A
D
725 mW
5.8 mW/°C
4.2 mW/°C
464 mW
525 mW
336 mW
PW
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
electrical characteristics at specified operating free-air temperature, V
otherwise noted)
= ±5 V, V = 0 (unless
DD
LE
TL3016C
TL3016I
UNIT
†
PARAMETER
TEST CONDITIONS
‡
TYP
‡
MIN
MAX
MIN
TYP
MAX
T
= 25°C
0.5
3
0.5
3
A
V
Input offset voltage
mV
µV/°C
µA
IO
T
A
= full range
3.5
3.5
Temperature coefficient of
input offset voltage
α
–4.8
0.1
–4.5
0.1
VIO
T
A
= 25°C
0.6
0.9
10
0.6
1.3
10
I
IO
Input offset current
Input bias current
T
A
= full range
= 25°C
T
A
6
6
I
IB
µA
T
A
= full range
10
10
V
= ±5 V
–3.75
1.25
3.5
3.5
–3.75
1.25
3.5
3.5
Common-mode input
voltage range
DD
DD
V
ICR
V
V
= 5 V
Common-mode rejection
ratio
CMRR
–3.75 ≤ V ≤ 3.5 V,
IC
T
= 25°C
80
60
80
97
72
80
60
80
97
72
dB
A
Positive supply: 4.6 V ≤ +V
≤ 5.4 V,
DD
T
A
= 25°C
Supply-voltage rejection
ratio
k
dB
SVR
Negative supply: –7 V ≤ –V
≤ –2 V,
DD
100
500
750
3.9
3.7
100
500
750
3.9
3.7
T
A
= 25°C
I
T
= 4 mA,
V+ ≤ 4.6 V,
V+ ≤ 4.6 V,
(sink)
= 25°C
600
600
A
V
OL
Low-level output voltage
High-level output voltage
mV
I
T
= 10 mA,
(sink)
= 25°C
A
V+ ≤ 4.6 V,
= 25°C
I
= 1 mA,
O
O
3.6
3.4
3.6
3.4
T
A
V
OH
V
V+ ≤ 4.6 V,
I
= 10 mA,
T
A
= 25°C
Positive supply current
Negative supply current
10.6
–1.3
12.5
0.8
10.6
–1.3
12.5
0.8
I
T
A
= full range
mA
DD
–1.8
2
–2.4
2
Low-level input voltage
(LATCH ENABLE)
V
V
V
IL
High-level input voltage
(LATCH ENABLE)
V
IH
V
V
= 0
0
1
0
1
Low-level input current
(LATCH ENABLE)
LE
I
IL
µA
= 2 V
24
39
24
45
LE
†
‡
Full range for the TL3016C is T = 0°C to 70°C. Full range for the TL3016I is T = –40°C to 85°C.
A
A
All typical values are measures with T = 25°C.
A
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
switching characteristics, V
= ±5 V, V = 0 (unless otherwise noted)
LE
DD
TL3016C
TYP
7.8
TL3016I
TYP
7.8
†
PARAMETER
UNIT
TEST CONDITIONS
MIN
MAX MIN
MAX
10
T
A
= 25°C
10
11.2
10
∆V = 100 mV,
I
V
= 5 mV
T
A
= full range
= 25°C
7.8
7.8
12.2
10
OD
‡
t
ns
Propagation delay time
pd1
T
A
7.6
7.6
∆V = 100 mV,
I
V
= 20 mV
T
A
= full range
7.6
11.2
7.6
12.2
OD
∆V = 100 mV,
V
OD
= 5 mV,
I
t
t
Pulse skew (|t
– t
|)
0.5
2.5
0.5
2.5
ns
ns
sk(p)
pd+ pd–
T
= 25°C
A
Setup time, LATCH ENABLE
su
†
‡
Full range for the TL3016C is 0°C to 70°C. Full range for the TL3016I is –40°C to 85°C.
t
cannot be measured in automatic handling equipment with low values of overdrive. The TL3016 is 100% tested with a 1-V step and 500-mV
pd1
overdrive at T = 25°C only. Correlation tests have shown that t
limits given can be ensured with this test, if additional dc tests are performed
is added to the overdrive.
A
pd1
to ensure that all internal bias conditions are correct. For low overdrive conditions, V
OS
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
vs Input voltage
2
3
I
I
Positive supply current
vs Frequency
CC
vs Free-air temperature
vs Free-air temperature
vs Overdrive voltage
vs Supply voltage
4
Negative supply current
Propagation delay time
5
CC
6
7
t
pd
vs Input impedance
vs Load capacitance
vs Free-air temperature
vs Free-air temperature
vs Free-air temperature
vs Output source current
vs Output sink current
vs Input voltage
8
9
10
11
12
13
14
15
V
V
Common-mode input voltage
IC
Input threshold voltage (LATCH ENABLE)
Output voltage
O
I
I
Input current (LATCH ENABLE)
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
TYPICAL CHARACTERISTICS
POSITIVE SUPPLY CURRENT
POSITIVE SUPPLY CURRENT
vs
vs
FREQUENCY
INPUT VOLTAGE
22
20
18
16
14
12
20
18
16
14
12
10
8
V
T
A
= ± 5 V
= 25°C
CC
V
T
A
= ± 5 V
= 25°C
CC
T
= 85°C
A
T
= 85°C
A
T
= 25°C
A
T
A
= 25°C
T
= –40°C
A
6
4
2
0
T
A
= –40°C
10
8
1
10
2
10
1
2
3
4
5
6
7
8
0
f – Frequency – MHz
V – Input Voltage – V
I
Figure 2
Figure 3
POSITIVE SUPPLY CURRENT
vs
NEGATIVE SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
15
0
V
CC
= ± 5 V
V
CC
= ± 5 V
14
– 0.5
– 1
13
12
11
10
9
– 1.5
– 2
8
7
– 2.5
– 3
6
5
– 50 – 25
0
25
50
75
100
125
– 50
– 25
0
25
50
75
100
125
T
A
– Free-Air Temperature – °C
T
A
– Free-Air Temperature – °C
Figure 4
Figure 5
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
TYPICAL CHARACTERISTICS
PROPAGATION DELAY TIME
PROPAGATION DELAY TIME
vs
vs
OVERDRIVE VOLTAGE
SUPPLY VOLTAGE
10
9
12
10
V
T
= ± 5 V
= 25°C
V
T
= ± 5 V
= 25°C
CC
A
CC
A
8
Falling Edge
Rising Edge
7
8
6
4
6
5
4
3
2
2
0
1
0
0
10
20
30
40
50
4.4
4.6
4.8
5
5.2
5.4
5.6
Overdrive Voltage – mV
V
CC
– Supply Voltage – V
Figure 6
Figure 7
PROPAGATION DELAY TIME
vs
PROPAGATION DELAY TIME
vs
INPUT IMPEDANCE
LOAD CAPACITANCE
20
18
16
14
10
9
V
T
= ± 5 V
= 25°C
V
T
A
= ± 5 V
= 25°C
CC
A
CC
t
PDHL
t
PDLH
8
7
6
5
4
3
2
5 mV
12
10
8
20 mV
6
4
2
0
1
0
0
50
100
150
200
250
300
0
10
20
30
40
50
Z
O
– Input Impedance – Ω
C
– Load Capacitance – pF
L
Figure 8
Figure 9
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
TYPICAL CHARACTERISTICS
PROPAGATION DELAY TIME
COMMON-MODE INPUT VOLTAGE
vs
vs
FREE-AIR TEMPERATURE
FREE-AIR TEMPERATURE
25
20
15
10
6
4
2
V
CC
= ± 5 V
V
CC
V
CC
= 5 V (Upper Limit)
= ± 5 V (Upper Limit)
0
V
CC
= 5 V (Lower Limit)
Rising Edge
Falling Edge
–2
5
0
–4
–6
V
= ± 5 V (Lower Limit)
CC
– 50 – 25
0
25
50
75
100
125
– 50 – 25
0
25
50
75
100
125
T
A
– Free-Air Temperature – °C
T
A
– Free-Air Temperature – °C
Figure 10
Figure 11
OUTPUT VOLTAGE
vs
INPUT THRESHOLD VOLTAGE (LATCH ENABLE)
vs
OUTPUT SOURCE CURRENT
FREE-AIR TEMPERATURE
5
2
V
CC
= ± 5 V
V
T
A
= ± 5 V
= 25°C
CC
4.8
1.8
1.6
1.4
1.2
4.6
4.4
4.2
4
T
= 85°C
A
T
A
= 25°C
1
0.8
0.6
0.4
T
= –40°C
A
3.8
3.6
3.4
3.2
3
0.2
0
0
5
10
15
20
–50 –25
0
25
50
75
100 125 150
T
A
– Free-Air Temperature – °C
I
– Output Source Current – mA
O(source)
Figure 12
Figure 13
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE
vs
OUTPUT SINK CURRENT
INPUT CURRENT (LATCH ENABLE)
vs
INPUT VOLTAGE
2
1.8
1.6
30
25
V
T
A
= ± 5 V
= 25°C
V
T
= ± 5 V
CC
CC
= 25°C
A
20
15
1.4
1.2
1
10
5
T
A
= 25°C
T
A
= –40°C
0.8
0.6
0.4
0
– 5
T
A
= 85°C
– 10
0.2
0
– 15
– 20
0
5
10
15
20
– 0.5
0
0.5
1
1.5
2
I
– Output Sink Current – mA
V – Input Voltage – V
I
O(sink)
Figure 14
Figure 15
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
MECHANICAL INFORMATION
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
PINS **
0.050 (1,27)
8
14
16
DIM
0.020 (0,51)
0.014 (0,35)
0.010 (0,25)
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
M
A MAX
A MIN
14
8
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
0.244 (6,20)
0.228 (5,80)
0.008 (0,20) NOM
0.157 (4,00)
0.150 (3,81)
Gage Plane
1
7
A
0.010 (0,25)
0°–8°
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.004 (0,10)
0.010 (0,25)
0.004 (0,10)
0.069 (1,75) MAX
4040047/B 03/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
D. Four center pins are connected to die mount pad.
E. Falls within JEDEC MS-012
10
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TL3016, TL3016Y
ULTRA-FAST LOW-POWER
PRECISION COMPARATORS
SLCS130D – MARCH 1997 – REVISED MARCH 2000
MECHANICAL INFORMATION
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
0,32
0,65
M
0,13
0,19
14
8
0,15 NOM
4,50
4,30
6,70
6,10
Gage Plane
0,25
1
7
0°–8°
0,75
A
0,50
Seating Plane
0,10
1,20 MAX
0,10 MIN
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
7,70
9,80
9,60
A MAX
A MIN
4040064/D 10/95
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 2000, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明