SNJ54F08J [TI]
F/FAST SERIES, QUAD 2-INPUT AND GATE, CDIP14;型号: | SNJ54F08J |
厂家: | TEXAS INSTRUMENTS |
描述: | F/FAST SERIES, QUAD 2-INPUT AND GATE, CDIP14 栅 CD 输入元件 逻辑集成电路 触发器 |
文件: | 总10页 (文件大小:351K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
54F08,74F08
Quad 2-Input AND Gate
Literature Number: SNOS147A
December 1994
54F/74F08
Quad 2-Input AND Gate
General Description
This device contains four independent gates, each of which
performs the logic AND function.
Features
n Guaranteed 4000V minimum ESD protection
Ordering Code: See Section 0
DSXXX
Commercial
Military
Package
Number
Pacage Descri
74F08PC
N14A
14-Lead (0.300" Wide) ed Dual-In
14-Lead Ceramic Dual-In-Lin
54F08DM (Note 2)
J14A
74F08SC (Note 1)
74F08SJ (Note 1)
M14A
M14D
W14B
E20A
14-Lead (0.150Molded Sll Otline, JEDEC
14-Lead (0.olded Small Outline, EIAJ
14-Lead C
54F08FM (Note 2)
54F08LM (Note 2)
Lead CeLeadless ip Carrier, Type C
=
Note 1: Devices also available in 13" reel. Use suffix SCX and SJX.
=
Note 2: Military grade device with environmental and burn-in processing. Use suffix DMQB, B and LMQB.
Logic Symbol
DS009457-3
Cogram
signment
C and Flatpak
Pin Assignment
for LCC
DS009457-2
DS009457-1
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 1997 National Semiconductor Corporation
DS009457
www.national.com
1
PrintDate=1997/08/26 PrintTime=15:23:43 9460 ds009457 Rev. No. 1 cmserv Proof
1
Unit Loading/Fan Out
See Section 0 for U.L. definitions
DSXXX
54F/74F
Input IIH/IIL
Pin Names
An, Bn
Description
U.L.
HIGH/LOW
1.0/1.0
Output IOH/IOL
20 µA/−0.6 mA
−1 mA/20 mA
Inputs
Outputs
On
50/33.3
www.national.com
2
PrintDate=1997/08/26 PrintTime=15:23:45 9460 ds009457 Rev. No. 1 cmserv Proof
2
Absolute Maximum Ratings (Note 3)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Current Applied to Output
in LOW State (Max)
twice the rated IOL (mA)
4000V
ESD Last Passing Voltage (Min)
Recommended Operating
Conditions
Free Air Ambient Temperature
Military
Storage Temperature
Ambient Temperature under Bias
Junction Temperature under Bias
Plastic
−65˚C to +150˚C
−55˚C to +125˚C
−55˚C to +175˚C
−55˚C to +150˚C
−55˚C to +125˚C
0˚C to +70˚C
VCC Pin Potential to
Ground Pin
Commercial
−0.5V to +7.0V
−0.5V to +7.0V
Supply Voltage
Military
Input Voltage (Note 4)
Input Current (Note 4)
Voltage Applied to Output
+4.5V to +5.5V
o +5.5V
−30 mA to +5.0 mA
Commercial
Note 3: Absolute maximum ratings are values beyoe may
be damaged or have its useful life impaired. Functioder thee
conditions is not implied.
=
in HIGH State (with VCC 0V)
Standard Output
TRI-STATE® Output
−0.5V to VCC
Note 4: Either voltage limit or culimit s suffictect inputs.
−0.5V to +5.5V
DC Electrical Characteristics
Symbol
Parameter
54F/74F
Typ
Units
ndons
Min
Max
VIH
Input HIGH Voltage
2.0
V
V
V
Recnized as a HIGH Signal
Recnized as a LOW Signal
VIL
Input LOW Voltage
0.8
II−18 mA
VCD
VOH
Input Clamp Diode Voltage
−1.2
n
Min
Min
Max
Max
Max
0.0
=
IOH −1 mA
Output HIGH
Voltage
54F 10% VCC
2.5
2.5
2.7
=
IOH −1 mA
74F 10% VCC
74F 5% VCC
54F 10% VCC
74F 10% VCC
54F
V
=
IOH −1 mA
=
IOL 20 mA
VOL
Output LOW
Voltage
5.0
100
7.0
250
50
=
IOL 20 mA
=
VIN 2.7V
IIH
Input HIGH
µA
µA
µA
V
Current
74F
=
VIN 7.0V
IBVI
ICEX
VID
IOD
Input HIGH Current
Breakdown Test
Output HIGH
Leakage Current
Input Leakage
Test
54F
74F
=
VOUT VCC
54F
74
=
.75
−60
IID 1.9 µA
All Other Pins Grounded
=
Out
74F
3.75
µA
0.0
VIOD 150 mV
All Other Pins Grounded
=
VIN 0.5V
IIL
−0.6
−150
8.3
mA
mA
mA
mA
Max
Max
Max
Max
=
VOUT 0V
IOS
ICCH
ICCL
t
P
Po
=
VO HIGH
5.5
8.6
=
12.9
VO LOW
AC Electrical Characteristics
See Section 0 for Waveforms and Load Configurations
DSXXX
74F
54F
74F
=
=
=
TA +25˚C
TA, VCC Mil
TA, VCC Com
Fig.
No.
=
=
=
Symbol
Parameter
VCC +5.0V
CL 50 pF
CL 50 pF
Units
=
CL 50 pF
Min
3.0
2.5
Typ
4.2
4.0
Max
5.6
Min
Max
7.5
Min
Max
6.6
tPLH
tPHL
Propagation Delay
An, Bn to On
2.5
2.0
3.0
2.5
ns
kk
-kk
DSXXX
5.3
7.5
6.3
Book
Extract
End
3
www.national.com
PrintDate=1997/08/26 PrintTime=15:23:51 9460 ds009457 Rev. No. 1 cmserv Proof
3
THIS PAGE IS IGNORED IN THE DATABOOK
4
PrintDate=1997/08/26 PrintTime=15:23:52 9460 ds009457 Rev. No. 1 cmserv Proof
4
Ordering Information
The device number is used to form part of a simplified purchasing code where the package type and temperature range are de-
fined as follows:
S009457-4
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Ceramic Leadless Chip Carrier (L)
NS Package Number E20A
5
www.national.com
PrintDate=1997/08/26 PrintTime=15:23:53 9460 ds009457 Rev. No. 1 cmserv Proof
5
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Ceramic Dal-In-Line P)
NS Package mber J1
14-Lead (0.150" Wide) Molded Small Outline, JEDEC (S)
NS Package Number M14A
www.national.com
6
PrintDate=1997/08/26 PrintTime=15:23:54 9460 ds009457 Rev. No. 1 cmserv Proof
6
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead (0.300" Wide) MoldEIAJ (SJ)
NS Package
14-Lead (0.300" Wide) Molded Dual-In-Line Package (P)
NS Package Number N14A
7
www.national.com
7
PrintDate=1997/08/26 PrintTime=15:23:55 9460 ds009457 Rev. No. 1 cmserv Proof
7
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead CeraFlatpak
NS Package Nuer W14
Y
S ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE-
VITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI-
CORATION. As used herein:
1. Life ices or systems are devices or sys-
tems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose fail-
ure to perform when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
National Semiconductor
Corporation
National Semiconductor
Europe
National Semiconductor
Hong Kong Ltd.
National Semiconductor
Japan Ltd.
Americas
Fax: +49 (0) 1 80-530 85 86
13th Floor, Straight Block,
Ocean Centre, 5 Canton Rd.
Tsimshatsui, Kowloon
Hong Kong
Tel: (852) 2737-1600
Fax: (852) 2736-9960
Tel: 81-3-5620-6175
Fax: 81-3-5620-6179
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
www.national.com
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
PrintDate=1997/08/26 PrintTime=15:23:55 9460 ds009457 Rev. No. 1 cmserv Proof
8
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Transportation and Automotive www.ti.com/automotive
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号:
SNJ54F109FKR
F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED J-KBAR FLIP-FLOP, COMPLEMENTARY OUTPUT, CQCC20, CERAMIC, LCC-20
TI
SNJ54F109J-00
F/FAST SERIES, DUAL POSITIVE EDGE TRIGGERED J-KBAR FLIP-FLOP, COMPLEMENTARY OUTPUT, CDIP16, CERAMIC, DIP-16
TI
SNJ54F112J-00
F/FAST SERIES, DUAL NEGATIVE EDGE TRIGGERED J-K FLIP-FLOP, COMPLEMENTARY OUTPUT, CDIP16
TI
©2020 ICPDF网 联系我们和版权申明