SNC55114J [TI]
DUAL LINE DRIVER, CDIP16, CERAMIC, DIP-16;
| 型号： | SNC55114J |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | DUAL LINE DRIVER, CDIP16, CERAMIC, DIP-16 驱动 CD 输出元件 接口集成电路 驱动器 |
| 文件： | 总19页 (文件大小：644K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN55114, SN75114
DUAL DIFFERENTIAL LINE DRIVERS
SLLS071C – SEPTEMBER 1973 – REVISED SEPTEMBER 1998
SN55114 . . . J OR W PACKAGE
SN75114 . . . D OR N PACKAGE
(TOP VIEW)
Choice of Open-Collector, Open-Emitter, or
Totem-Pole Outputs
Single-Ended or Differential AND/NAND
Outputs
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1ZP
1ZS
1YS
1YP
1A
V
CC
Single 5-V Supply
2ZP
2ZS
2YS
2YP
2C
Dual-Channel Operation
TTL Compatible
Short-Circuit Protection
High-Current Outputs
Triple inputs
1B
1C
2B
GND
2A
Clamp Diodes at Inputs and Outputs
Designed for Use With SN55115 and
SN75115 Differential Line Receivers
SN55114 . . . FK PACKAGE
(TOP VIEW)
Designed to Be Interchangeable With
National DS9614 Line Driver
3
2
1
20 19
18
description
2ZS
2YS
NC
1YS
1YP
NC
1A
4
5
6
7
8
17
16
15
14
The SN55114 and SN75114 dual differential line
drivers are designed to provide differential output
signals with the high-current capability for driving
balanced lines, such as twisted pair, at normal line
impedances without high power dissipation. The
output stages are similar to TTL totem-pole
outputs, but with the sink outputs, YS and ZS, and
the corresponding active pullup terminals, YP and
ZP, available on adjacent package pins. Since the
output stages provide TTL-compatible output
levels, these devices can also be used as TTL
expanders or phase splitters.
2YP
2C
1B
9 10 11 12 13
NC – No internal connection
The SN55114 is characterized for operation over the full military temperature range of –55°C to 125°C. The
SN75114 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
INPUTS
OUTPUTS
A
B
C
Y
H
L
Z
L
H
H
H
All other input combinations
H = high level, L = low level
H
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1998, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55114, SN75114
DUAL DIFFERENTIAL LINE DRIVERS
SLLS071C – SEPTEMBER 1973 – REVISED SEPTEMBER 1998
†
logic symbol
logic diagram (positive logic)
4
3
1YP
1YS
5
1A
6
&
4
3
1YP
1YS
1ZP
5
6
7
1A
1B
1B
7
1
2
1
1ZP
1ZS
1C
1C
2
1ZS
2YP
2YS
2ZP
2ZS
12
13
15
14
12
13
9
2YP
2YS
9
2A
2A
2B
2C
10
11
10
2B
15
14
11
2ZP
2ZS
2C
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Pin numbers shown are for the D, J, N, and W packages.
schematic (each driver)
To
Inputs
Other Driver
B
A
C
7,11
5,9
16
V
‡
1 k
CC
6,
10
600
600
1 k
4 k
‡
‡
600
4 k
9
9
4 k
900
900
5 k
1, 15 NAND Pullup
ZP
2, 14 NAND
AND
Pullup
YP
4, 12
3, 13
90
90
5 k
‡
‡
Sink Output
ZS
AND
Sink Output
YS
500
333
500
8
GND
‡
These components are common to both drivers. Resistor values shown are nominal and in ohms.
Pin numbers shown are for the D, J, N, and W packages.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55114, SN75114
DUAL DIFFERENTIAL LINE DRIVERS
SLLS071C – SEPTEMBER 1973 – REVISED SEPTEMBER 1998
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, V
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
CC
Input voltage, V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
I
Off-state voltage applied to open-collector outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Storage temperature range, T
Case temperature for 60 seconds, T : FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
c
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or W package . . . . . . . . . . . . . . . . 300°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or N package . . . . . . . . . . . . . . . . 260°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values are with respect to the network ground terminal.
DISSIPATION RATING TABLE
T
≤ 25°C
DERATING FACTOR
T
= 70°C
T = 125°C
A
A
A
PACKAGE
POWER RATING
ABOVE T = 25°C
POWER RATING POWER RATING
A
D
950 mW
7.6 mW/°C
11.0 mW/°C
11.0 mW/°C
9.2 mW/°C
8.0 mW/°C
608 mW
880 mW
880 mW
736 mW
640 mW
—
275 mW
275 mW
—
‡
FK
1375 mW
‡
J
1375 mW
N
1150 mW
‡
W
1000 mW
200 mW
‡
In the FK, J, and W packages, SN55114 chips are either silver glass or alloy mounted.
recommended operating conditions (unless otherwise noted)
SN55114
MIN NOM
SN75114
MIN NOM
UNIT
MAX
MAX
Supply voltage, V
CC
High-level input voltage, V
4.5
2
5
5.5
4.75
2
5
5.25
V
V
IH
Low-level input voltage, V
0.8
–40
40
0.8
–40
40
V
IL
High-level output current, I
mA
mA
°C
OH
OL
Low-level output current, I
Operating free-air temperature, T
–55
125
0
70
A
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55114, SN75114
DUAL DIFFERENTIAL LINE DRIVERS
SLLS071C – SEPTEMBER 1973 – REVISED SEPTEMBER 1998
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
SN55114
SN75114
†
PARAMETER
UNIT
V
TEST CONDITIONS
‡
‡
MIN TYP
MAX
MIN TYP
MAX
V
V
Input clamp voltage
V
CC
= MIN, I = –12 mA
–0.9 –1.5
–0.9 –1.5
IK
I
I
I
= –10 mA
= – 40 mA
2.4
2
3.4
3
2.4
2
3.4
3
High-level output
voltage
V
V
= MIN,
= 0.8 V
V
IH
= 2 V,
OH
CC
IL
V
OH
OH
Low-level output
voltage
V
V
= MIN,
= 0.8 V,
V
= 2 V,
= 40 mA
CC
IL
IH
V
0.2
6.1
0.4
6.5
0.2 0.45
V
V
OL
OK
I
I
I
OL
V
= 5 V,
= 40 mA,
T
A
= 25°C
= 25°C
= 25°C
= 125°C
= 25°C
= 70°C
6.1
6.5
CC
CC
O
O
V
Output clamp voltage
V
= MAX,
= –40 mA,
T
A
–1.1 –1.5
–1.1 –1.5
T
A
1
100
200
V
= 12 V
OH
OH
T
A
Off-state open collector
output current
I
I
V
CC
= MAX
µA
O(off)
T
A
1
100
200
V
= 5.25 V
T
A
Input current at
maximum input voltage
V
CC
= MAX, V = 5.5 V
1
1
mA
I
I
I
I
High-level input current
Low-level input current
Short-circuit
V
V
= MAX, V = 2.4 V
40
40
µA
IH
CC
I
= MAX, V = 0.4 V
–1.1 –1.6
–1.1 –1.6
mA
IL
CC
I
I
V
CC
= MAX,
V
O
= 0,
T = 25°C
A
–40
–90 –120
–40
–90 –120
mA
mA
OS
CC
§
output current
V
V
= MAX
37
47
50
65
37
47
50
70
Supply current
(both drivers)
All inputs at 0 V, No load,
= 25°C
CC
I
T
A
= 7 V
CC
†
All parameters, with the exception of off-state open-collector output current, are measured with the active pullup connected to the sink output.
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
‡
§
All typical values are at T = 25°C and V
= 5 V, with the exception of I
at 7 V.
Only one output should be shorted at a time, and duration of the short circuit should not exceed one second.
A
CC
CC
switching characteristics, V
= 5 V, T = 25°C
A
CC
SN55114
TYP
15
SN75114
TYP
15
TEST
CONDITIONS
PARAMETER
UNIT
MIN
MAX
20
MIN
MAX
30
t
t
Propagation delay time, low- to high-level output
Propagation delay time, high- to low-level output
ns
ns
C
= 30 pF,
PLH
L
See Figure 1
11
20
11
30
PHL
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55114, SN75114
DUAL DIFFERENTIAL LINE DRIVERS
SLLS071C – SEPTEMBER 1973 – REVISED SEPTEMBER 1998
PARAMETER MEASUREMENT INFORMATION
≤ 5 ns
≤ 5 ns
3 V
0 V
V
= 5 V
90%
1.5 V
90%
1.5 V
Input
CC
10%
10%
Input
t
w
2 kΩ
Y
t
t
PHL
PLH
AND Output
V
OH
C
= 30 pF
L
Pulse
Y
(see Note B)
1.5 V
1.5 V
1.5 V
Generator
Output
(see Note A)
Z
V
V
OL
NAND Output
50 Ω
C
= 30 pF
L
t
OH
PLH
(see Note B)
Z
1.5 V
Output
TEST CIRCUIT
V
OL
t
PHL
VOLTAGE WAVEFORMS
NOTES: A. The pulse generator has the following characteristics: Z = 500 Ω, PRR ≤ 500 kHz, t ≤ 100 ns.
O
w
B.
C includes probe and jig capacitance.
L
Figure 1. Test Circuit and Voltage Waveforms
†
TYPICAL CHARACTERISTICS
OUTPUT VOLTAGE
OUTPUT VOLTAGE
vs
DATA INPUT VOLTAGE
vs
DATA INPUT VOLTAGE
6
5
4
3
2
1
0
6
5
4
3
2
1
0
No Load
V
= 5 V
CC
No Load
T
= 25°C
A
T
= 125°C
A
V
= 5.5 V
CC
V
V
= 5 V
CC
= 4.5 V
CC
T
= 25°C
A
T
= –55°C
A
0
1
2
3
4
0
1
2
3
4
V – Data Input Voltage – V
I
V – Data Input Voltage – V
I
Figure 2
Figure 3
†
Operationof the device at these or any other conditions beyond those indicated under ”recommended operating conditions” is not implied. These
parameters were measured with the active pullup connected to the sink output.
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55114, SN75114
DUAL DIFFERENTIAL LINE DRIVERS
SLLS071C – SEPTEMBER 1973 – REVISED SEPTEMBER 1998
†
TYPICAL CHARACTERISTICS
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
5
4
3
2
1
0
0.4
0.3
0.2
0.1
0
T
A
= 25°C
T
A
= 25°C
V
= 5.5 V
CC
V
= 5.5 V
V
CC
V
= 5 V
CC
= 4.5 V
CC
V
= 4.5 V
CC
0
10
20
30
40
50
60
70
80
0
–20
–40
–60
–80
–100 –120
I
– High-Level Output Current – mA
I
– Low-Level Output Current – mA
OH
OL
Figure 4
Figure 5
OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
PROPAGATION DELAY TIMES
vs
FREE-AIR TEMPERATURE
40
4
3.6
3.2
2.8
2.4
2
V
= 4.5 V
V
= 5 V
CC
CC
See Figure 1
V
(I
= –10 mA)
30
20
10
0
OH OH
V
(I = –40 mA)
OH OH
t
PLH
1.6
1.2
0.8
0.4
0
t
PHL
V
(I
= 40 mA)
25
OL OL
0
50
–75 –50 –25
25
75
100 125
–75 –50 –25
0
50
75
100 125
T
A
– Free-Air Temperature – °C
T
A
– Free-Air Temperature – °C
Figure 6
Figure 7
†
6
Operation of the device at these or any other conditions beyond those indicated under ”recommended operating conditions” is not implied. These
parameters were measured with the active pullup connected to the sink output.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55114, SN75114
DUAL DIFFERENTIAL LINE DRIVERS
SLLS071C – SEPTEMBER 1973 – REVISED SEPTEMBER 1998
†
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
(BOTH DRIVERS)
vs
SUPPLY CURRENT
(BOTH DRIVERS)
vs
SUPPLY VOLTAGE
FREE-AIR TEMPERATURE
80
70
60
50
42
40
38
36
34
32
30
No Load
V
= 5 V
CC
T
A
= 25°C
Inputs Grounded
Outputs Open
Inputs Grounded
40
30
Inputs Open
20
10
0
0
1
2
3
4
5
6
7
8
–75 –50 –25
0
25
50
75
100 125
V
CC
– Supply Voltage – V
T
A
– Free-Air Temperature – °C
Figure 8
Figure 9
SUPPLY CURRENT
(BOTH DRIVERS)
vs
FREQUENCY
100
V
R
C
= 5 V
= ∞
= 30 pF
CC
L
L
80
60
Inputs: 3-V Square Wave
T
= 25°C
A
40
20
0
0.1
0.4
1
4
10
40 100
f – Frequency – MHz
Figure 10
†
Operationof the device at these or any other conditions beyond those indicated under ”recommended operating conditions” is not implied. These
parameters were measured with the active pullup connected to the sink output.
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN55114, SN75114
DUAL DIFFERENTIAL LINE DRIVERS
SLLS071C – SEPTEMBER 1973 – REVISED SEPTEMBER 1998
APPLICATION INFORMATION
1/2 SN75114
Driver
1/2 SN75115
Receiver
†
†
R
T
R
T
Twisted Pair
= Z . A capacitor can be connected in series with R to reduce power dissipation.
†
R
T
O
T
Figure 11. Basic Party-Line or Data-Bus Differential Data Transmission
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/audio
Automotive
Broadband
Digital Control
Military
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
microcontroller.ti.com
www.ti.com/lpw
Low Power
Wireless
Telephony
www.ti.com/telephony
Video & Imaging
Wireless
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
LCCC
CDIP
CFP
Drawing
5962-88744022A
5962-8874402EA
5962-8874402FA
JM38510/10403BEA
SN55114J
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
FK
J
20
16
16
16
16
16
1
1
1
1
1
TBD
TBD
TBD
TBD
TBD
POST-PLATE N / A for Pkg Type
A42 SNPB
A42 SNPB
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
W
J
CDIP
CDIP
SOIC
J
SN75114D
D
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN75114DE4
SN75114DG4
SN75114DR
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
D
D
D
D
D
16
16
16
16
16
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN75114DRE4
SN75114DRG4
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SN75114J
SN75114N
OBSOLETE
ACTIVE
CDIP
PDIP
J
16
16
TBD
Call TI
Call TI
N
25
25
Pb-Free
(RoHS)
CU NIPDAU N / A for Pkg Type
CU NIPDAU N / A for Pkg Type
POST-PLATE N / A for Pkg Type
SN75114NE4
ACTIVE
PDIP
N
16
Pb-Free
(RoHS)
SNJ55114FK
SNJ55114J
SNJ55114W
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
J
20
16
16
1
1
1
TBD
TBD
TBD
A42 SNPB
A42 SNPB
N / A for Pkg Type
N / A for Pkg Type
W
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
9-Oct-2007
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
12-Jan-2008
TAPE AND REEL BOX INFORMATION
Device
Package Pins
Site
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) (mm) Quadrant
(mm)
(mm)
SN75114DR
D
16
SITE 27
330
16
6.5
10.3
2.1
8
16
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
12-Jan-2008
Device
Package
Pins
Site
Length (mm) Width (mm) Height (mm)
SN75114DR
D
16
SITE 27
342.9
345.9
28.58
Pack Materials-Page 2
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A
B
NO. OF
TERMINALS
**
18 17 16 15 14 13 12
MIN
MAX
MIN
MAX
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
19
20
11
10
9
20
28
44
52
68
84
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
B SQ
22
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
8
A SQ
23
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
7
24
25
6
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
5
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
26 27 28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140/D 10/96
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright 2008, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明