SN74AHC1G86-Q1 [TI]
SINGLE 2-INPUT EXCLUSIVE-OR GATE; 单路2输入异或门
| 型号： | SN74AHC1G86-Q1 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | SINGLE 2-INPUT EXCLUSIVE-OR GATE |
| 文件： | 总12页 (文件大小：583K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN74AHC1G86-Q1
www.ti.com
SCLS723 –APRIL 2011
SINGLE 2-INPUT EXCLUSIVE-OR GATE
Check for Samples: SN74AHC1G86-Q1
1
FEATURES
DBV PACKAGE
(TOP VIEW)
•
•
•
•
•
•
Qualified For Automotive Applications
Operating Range of 2 V to 5.5 V
Max tpd of 10ns at 5 V
Low Power Consumption, 10-μA Max ICC
±8-mA Output Drive at 5 V
Schmitt Trigger Action at All Inputs Makes the
Circuit Tolerant for Slower Input Rise and Fall
Time
•
DESCRIPTION
The SN74AHC1G86-Q1 is a single 2-input exclusive-OR gate. The device performs the Boolean function Y = A
⊕ B or Y = AB + AB in positive logic.
A common application is as a true/complement element. If one of the inputs is low, the other input is reproduced
in true form at the output. If one of the inputs is high, the signal on the other input is reproduced inverted at the
output.
ORDERING INFORMATION(1)
TA
PACKAGE(2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
ACYU
−40°C to 125°C
SOT − DBV
Reel of 3000
SN74AHC1G86QDBVRQ1
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
FUNCTION TABLE
INPUTS
OUTPUT
Y
A
L
B
L
L
H
H
L
L
H
L
H
H
H
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011, Texas Instruments Incorporated
SN74AHC1G86-Q1
SCLS723 –APRIL 2011
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
EXCLUSIVE-OR LOGIC
An exclusive-OR gate has many applications, some of which can be represented better by alternative logic
symbols.
These are five equivalent exclusive-OR symbols valid for an SN74AHC1G86 gate in positive logic; negation may
be shown at any two ports.
ABSOLUTE MAXIMUM RATINGS(1)
MIN
–0.5
–0.5
–0.5
MAX
7
UNIT
V
VCC
VI
Supply voltage range
Input voltage range(2)
Output voltage range applied in the high- or low-state(2)
7
V
VO
IIK
VCC + 0.5
–20
V
Input clamp current
VI < 0 V
O < 0 V or VO > VCC
V
IOK
IO
Output clamp current
V
±20
mA
mA
mA
°C/W
°C
Continuous output current
Continuous current through VCC or GND
Thermal impedance(3)
VO = 0 V to VCC
±25
±50
θJA
DBV package
206
Tstg
Storage temperature range
–40
125
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated
Product Folder Link(s): SN74AHC1G86-Q1
SN74AHC1G86-Q1
www.ti.com
SCLS723 –APRIL 2011
RECOMMENDED OPERATING CONDITIONS(1)
MIN
2
MAX
UNIT
VCC
Supply voltage
5.5
V
VCC = 2 V
VCC = 3 V
VCC = 5.5 V
VCC = 2 V
VCC = 3 V
VCC = 5.5 V
1.5
2.1
3.85
VIH
High-level input voltage
V
V
0.5
0.9
1.65
5.5
VCC
–50
–4
VIL
Low-level input voltage
VI
Input voltage
0
0
V
V
VO
Output voltage
VCC = 2 V
μA
IOH
High-level output current
Low-level output current
VCC = 3.3 V ±0.3 V
VCC = 5 V ±0.5 V
VCC = 2 V
mA
μA
–8
50
IOL
VCC = 3.3 V ±0.3 V
VCC = 5 V ±0.5 V
VCC = 3.3 V ±0.3 V
VCC = 5 V ±0.5 V
4
mA
8
100
20
Δt/ΔV
Input transition rise or fall rate
Operating free-air temperature
ns/V
TA
–40
125
°C
(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation.
ELECTRICAL CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
TA = 25°C
PARAMETER
TEST CONDITIONS
VCC
MIN MAX UNIT
MIN
1.9
TYP
2
MAX
2 V
3 V
1.9
2.9
IOH = –50 μA
2.9
3
VOH
4.5 V
3 V
4.4
4.5
4.4
2.48
3.8
V
V
IOH = –4 mA
IOH = –8 mA
2.58
3.94
4.5 V
2 V
0.1
0.1
0.1
0.36
0.36
±0.1
1
0.1
0.1
0.1
0.44
0.44
±1
IOL = 50 μA
3 V
VOL
4.5 V
3 V
IOL = 4 mA
IOL = 8 mA
4.5 V
0 V to 5.5 V
5.5 V
5 V
II
VI = 5.5 V or GND
VI = VCC or GND,
VI = VCC or GND
μA
μA
pF
ICC
CI
IO = 0 A
10
4
10
10
Copyright © 2011, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): SN74AHC1G86-Q1
SN74AHC1G86-Q1
SCLS723 –APRIL 2011
www.ti.com
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VCC = 3.3 V ±0.3 V, TA = –40°C to 125°C, see Figure 1
TA = 25°C
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
MIN
MAX UNIT
MIN
TYP
9.5
MAX
14.5
14.5
tPLH
tPHL
1
1
16.5
ns
A or B
Y
CL = 50 pF
9.5
16.5
SWITCHING CHARACTERISTICS
over recommended operating free-air temperature range, VCC = 5 V ±0.5 V, TA = –40°C to 125°C, see Figure 1
TA = 25°C
FROM
(INPUT)
TO
(OUTPUT)
LOAD
CAPACITANCE
PARAMETER
MIN
MAX UNIT
MIN
TYP
6.3
MAX
8.8
tPLH
tPHL
1
1
10
ns
10
A or B
Y
CL = 50 pF
6.3
8.8
OPERATING CHARACTERISTICS
VCC = 5 V, TA = 25°C
PARAMETER
TEST CONDITIONS
TYP
UNIT
Cpd
Power dissipation capacitance
No load, f = 1 MHz
18
pF
4
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated
Product Folder Link(s): SN74AHC1G86-Q1
SN74AHC1G86-Q1
www.ti.com
SCLS723 –APRIL 2011
PARAMETER MEASUREMENT INFORMATION
Figure 1. Load Circuit and Voltage Waveforms
Copyright © 2011, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Link(s): SN74AHC1G86-Q1
PACKAGE OPTION ADDENDUM
www.ti.com
8-Apr-2011
PACKAGING INFORMATION
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
SN74AHC1G86QDBVRQ1
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN74AHC1G86-Q1 :
Catalog: SN74AHC1G86
•
Enhanced Product: SN74AHC1G86-EP
•
NOTE: Qualified Version Definitions:
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
8-Apr-2011
Catalog - TI's standard catalog product
•
•
Enhanced Product - Supports Defense, Aerospace and Medical Applications
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
7-Apr-2011
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74AHC1G86QDBVRQ SOT-23
1
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
7-Apr-2011
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SOT-23 DBV
SPQ
Length (mm) Width (mm) Height (mm)
203.0 203.0 35.0
SN74AHC1G86QDBVRQ1
5
3000
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt
power.ti.com
Transportation and
Automotive
www.ti.com/automotive
Microcontrollers
RFID
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
Wireless
www.ti.com/video
www.ti.com/wireless-apps
RF/IF and ZigBee® Solutions www.ti.com/lprf
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明