SN74ACT16861DLR [TI]
ACT SERIES, DUAL 10-BIT TRANSCEIVER, TRUE OUTPUT, PDSO56;型号: | SN74ACT16861DLR |
厂家: | TEXAS INSTRUMENTS |
描述: | ACT SERIES, DUAL 10-BIT TRANSCEIVER, TRUE OUTPUT, PDSO56 光电二极管 输出元件 逻辑集成电路 |
文件: | 总9页 (文件大小:299K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
54ACT16861, 74ACT16861
20-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCAS197B – JUNE 1990 – REVISED NOVEMBER 1996
54ACT16861 . . . WD PACKAGE
74ACT16861 . . . DL PACKAGE
(TOP VIEW)
Members of the Texas Instruments
Widebus Family
Inputs Are TTL-Voltage Compatible
3-State Outputs Drive Bus Lines Directly
1
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
1OEAB
1B1
1OEBA
1A1
1A2
GND
1A3
1A4
Flow-Through Architecture Optimizes
PCB Layout
2
3
1B2
GND
1B3
4
Distributed V
Minimizes High-Speed Switching Noise
and GND Pin Configuration
CC
5
6
1B4
EPIC (Enhanced-Performance Implanted
CMOS) 1-µm Process
7
V
V
CC
CC
8
1B5
1B6
1B7
GND
1B8
1B9
1B10
2B1
2B2
2B3
GND
2B4
2B5
2B6
1A5
1A6
1A7
GND
1A8
1A9
1A10
2A1
2A2
2A3
GND
2A4
2A5
2A6
500-mA Typical Latch-Up Immunity at
125°C
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Package Options Include Shrink Plastic
Small-Outline 300-mil (DL) Packages Using
25-mil Center-to-Center Pin Spacings and
380-mil Fine-Pitch Ceramic Flat (WD)
Packages Using 25-mil Center-to-Center
Pin Spacings
description
The ’ACT16861 are noninverting 20-bit
transceivers designed for asynchronous
communication between data buses. The
control-function implementation minimizes
external timing requirements.
V
V
CC
CC
2B7
2B8
GND
2A7
2A8
GND
2A9
2A10
2OEBA
The ’ACT16861 can be used as two 10-bit
transceivers or one 20-bit transceiver. They allow
data transmission from the A bus to the B bus or
from the B bus to the A bus, depending upon the
logic level at the output-enable (OEAB or OEBA)
inputs. The output-enable inputs can be used to
disable the device so that the buses are effectively
isolated.
2B9
2B10
2OEAB
The 74ACT16861 is packaged in TI’s shrink small-outline package, which provides twice the I/O pin count and
functionality of standard small-outline packages in the same printed-circuit-board area.
The 54ACT16861 is characterized for operation over the full military temperature range of –55°C to 125°C. The
74ACT16861 is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
Copyright 1996, Texas Instruments Incorporated
UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
54ACT16861, 74ACT16861
20-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCAS197B – JUNE 1990 – REVISED NOVEMBER 1996
FUNCTION TABLE
(each 10-bit section)
INPUTS
OPERATION
OEAB
OEBA
Latch A and B
(A = B)
L
L
L
H
H
H
L
A to B
B to A
H
Isolation
†
logic symbol
56
EN1
EN2
EN3
EN4
1OEBA
1OEAB
2OEBA
2OEAB
1
29
28
55
2
1
1
1
1A1
1B1
2
54
52
51
49
48
47
45
44
43
42
3
5
1A2
1A3
1A4
1A5
1A6
1A7
1A8
1A9
1A10
2A1
1B2
1B3
1B4
1B5
1B6
1B7
1B8
1B9
1B10
2B1
6
8
9
10
12
13
14
15
3
1
1
4
41
40
38
37
36
34
33
31
30
16
17
19
20
21
23
24
26
27
2A2
2A3
2A4
2A5
2A6
2A7
2A8
2A9
2A10
2B2
2B3
2B4
2B5
2B6
2B7
2B8
2B9
2B10
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
54ACT16861, 74ACT16861
20-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCAS197B – JUNE 1990 – REVISED NOVEMBER 1996
logic diagram (positive logic)
56
29
28
1OEBA
2OEBA
2OEAB
1
1OEAB
55
2
42
15
1B1
2B1
1A1
2A1
To Nine Other Channels
To Nine Other Channels
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
+ 0.5 V
+ 0.5 V
I
CC
CC
Output voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
O
Input clamp current, I (V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mA
IK
I
I
CC
Output clamp current, I
(V < 0 or V > V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
OK
O O CC
Continuous output current, I (V = 0 to V ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Continuous current through V
Maximum power package dissipation at T = 55°C (in still air) (see Note 2): DL package . . . . . . . . . . . 1.4 W
Storage temperature range, T
O
O
CC
CC
or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±500 mA
A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The maximum package power dissipation is calculated using a junction temperature of 150°C and a board trace length of 750 mils.
recommended operating conditions (see Note 3)
54ACT16861
MIN NOM
74ACT16861
MIN NOM
UNIT
MAX
MAX
V
V
V
V
V
Supply voltage
4.5
2
5
5.5
4.5
2
5
5.5
V
V
CC
IH
IL
High-level input voltage
Low-level input voltage
Input voltage
0.8
0.8
V
0
0
V
V
0
0
V
V
V
I
CC
CC
Output voltage
V
O
CC
CC
I
I
High-level output current
Low-level output current
Input transition rise or fall rate
Operating free-air temperature
–24
24
–24
24
mA
mA
ns/V
°C
OH
OL
∆t/∆v
0
10
0
10
T
–55
125
–40
85
A
NOTE 3: Unused inputs must be held high or low to prevent them from floating.
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
54ACT16861, 74ACT16861
20-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCAS197B – JUNE 1990 – REVISED NOVEMBER 1996
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
T
A
= 25°C
54ACT16861
74ACT16861
PARAMETER
TEST CONDITIONS
V
UNIT
CC
MIN
4.4
TYP
MAX
MIN
4.4
MAX
MIN
4.4
MAX
4.5 V
5.5 V
4.5 V
5.5 V
5.5 V
4.5 V
5.5 V
4.5 V
5.5 V
5.5 V
5.5 V
5.5 V
5.5 V
I
= –50 µA
OH
5.4
5.4
5.4
V
3.94
4.94
3.8
3.8
V
OH
I
I
I
= –24 mA
= –75 mA
= 50 µA
OH
OH
OL
4.8
4.8
†
3.85
3.85
0.1
0.1
0.1
0.1
0.1
0.1
V
0.36
0.36
0.44
0.44
1.65
±1
0.44
0.44
1.65
±1
V
OL
I
I
= 24 mA
OL
†
= 75 mA
OL
I
I
I
Control inputs V = V
or GND
±0.1
±0.5
8
µA
µA
µA
I
I
CC
‡
A or B ports
V
= V
or GND
±5
±5
OZ
CC
O
CC
V = V
or GND,
I
O
= 0
80
80
I
CC
One input at 3.4 V,
Other inputs at V
§
5.5 V
0.9
1
1
mA
∆I
CC
or GND
CC
or GND
C
C
Control inputs V = V
5 V
5 V
4.5
17
pF
pF
i
I
CC
= V or GND
CC
A or B ports
V
io
O
†
‡
§
Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms.
For I/O ports, the parameter I includes the input leakage current.
OZ
This is the increase in supply current for each input that is at one of the specified TTL voltage levels rather than 0 V or V
.
CC
switching characteristics over recommended operating free-air temperature range,
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
V
CC
T
A
= 25°C
TYP
6.5
54ACT16861
74ACT16861
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
UNIT
ns
MIN
3.1
2.9
2.4
3.7
4.9
4.5
MAX
9.2
10
MIN
3.1
2.9
2.4
3.7
4.9
4.5
MAX
10.4
11.1
10
MIN
3.1
2.9
2.4
3.7
4.9
4.5
MAX
10.4
11.1
10
t
t
t
t
t
t
PLH
PHL
PZH
PZL
PHZ
PLZ
A or B
B or A
A or B
A or B
7.5
6.6
9
ns
OEBA or OEAB
OEBA or OEAB
8.5
11.5
9.8
9.3
12.7
10.7
10
12.7
10.7
10
7.4
ns
6.9
operating characteristics, V
= 5 V, T = 25°C
A
CC
PARAMETER
TEST CONDITIONS
= 50 pF, f = 1 MHz
L
TYP
64
UNIT
Outputs enabled
Outputs disabled
C
Power dissipation capacitance per transceiver
C
pF
pd
14
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
54ACT16861, 74ACT16861
20-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCAS197B – JUNE 1990 – REVISED NOVEMBER 1996
PARAMETER MEASUREMENT INFORMATION
2 × V
CC
Open
GND
TEST
S1
S1
t
/t
Open
PLH PHL
/t
500 Ω
From Output
Under Test
t
2 × V
CC
GND
PLZ PZL
t
/t
PHZ PZH
C
= 50 pF
L
500 Ω
(see Note A)
LOAD CIRCUIT
3 V
0 V
Timing Input
Data Input
1.5 V
t
w
t
h
t
3 V
su
3 V
0 V
Input
1.5 V
1.5 V
1.5 V
1.5 V
0 V
VOLTAGE WAVEFORMS
VOLTAGE WAVEFORMS
Output
Control
(low-level
enabling)
3 V
0 V
3 V
0 V
Input
1.5 V
1.5 V
1.5 V
1.5 V
t
PZL
t
t
PHL
PLH
t
PLZ
Output
Waveform 1
V
OH
V
CC
In-Phase
Output
50% V
50% V
CC
50% V
50% V
CC
V
CC
20% V
S1 at 2 × V
(see Note B)
CC
CC
CC
V
V
OL
OL
t
PHZ
t
PLH
t
t
PHL
PZH
Output
Waveform 2
S1 at GND
V
OH
OH
0 V
Out-of-Phase
Output
80% V
50% V
50% V
CC
CC
CC
V
OL
(see Note B)
VOLTAGE WAVEFORMS
includes probe and jig capacitance.
VOLTAGE WAVEFORMS
NOTES: A.
C
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t = 3 ns, t = 3 ns.
O
r
f
D. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
24-Feb-2006
PACKAGING INFORMATION
Orderable Device
74ACT16861DL
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SSOP
DL
56
56
56
56
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
74ACT16861DLG4
74ACT16861DLR
74ACT16861DLRG4
SSOP
SSOP
SSOP
DL
DL
DL
20 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
1000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) W1 (mm)
(mm) (mm) Quadrant
74ACT16861DLR
SSOP
DL
56
1000
330.0
32.4
11.35
18.67
3.1
16.0
32.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SSOP DL 56
SPQ
Length (mm) Width (mm) Height (mm)
346.0 346.0 49.0
74ACT16861DLR
1000
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
Logic
Military
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
RF/IF and ZigBee® Solutions www.ti.com/lprf
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明