PT6342 [TI]
6-A 12-V Input Adjustable Integrated Switching Regulator; 6 -A 12 - V输入可调集成开关稳压器
| 型号： | PT6342 |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 6-A 12-V Input Adjustable Integrated Switching Regulator |
| 文件： | 总9页 (文件大小：175K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PT6340 Series
6-A 12-V Input Adjustable
Integrated Switching Regulator
SLTS138A
Revised (2/15/2002)
Features
• 6A Output Current
• Input Voltage Range:
10.8 V to 13.2 V
• 90% Efficiency
• Adjustable Output Voltage
• Standby Function
• Short Circuit Protection
• Small Footprint (0.61 in2)
• Solderable Copper Case
6
• 8.8 10 Hours MTBF
Description
Ordering Information
Pin-Out Information
PT 6341r = 5.0 Volts
PT 6342r = 3.3 Volts
PT 6343r = 2.5 Volts
PT 6344r = 1.8 Volts
PT 6345r = 1.5 Volts
PT 6346r = 1.2 Volts
The PT6340 Excalibur™ power modules
are a series of high performance Integrated
Switching Regulators (ISRs), housed in a
thermally efficient solderable copper case.
These modules operate from a 12V input
voltage bus to produce a high-output low-
voltage power source; ideal for powering the
industry’s latest DSP and microprocessors.
The series includes standard output bus
voltages ranging from 5VDC to 1.2VDC.
The innovative copper case construction
provides superior thermal performance in a
small footprint. Both through-hole and
surface mount pin configurations are avail-
able. The PT6340 series operating features
include external output voltage adjustment,
an On/Off inhibit, and short-circuit protection.
A 100µF input, and 330µF output capacitor
are required for proper operation.
Pin Function
1
2
3
4
5
6
7
8
9
Inhibit *
Vin
Vin
Vin
GND
GND
GND
GND
Vout
PT Series Suffix
(PT1234x)
10 Vout
11 Vout
12 Vout Adj *
Case/Pin
Configuration
O rder
Suffix
Package
Code *
Vertical
Horizontal
SMD
N
A
C
(EPH)
(EPJ)
(EPK)
*
For further information, see
application notes.
* Previously known as package styles 1540/50.
(Reference the applicable package code drawing
for the dimensions and PC board layout)
Standard Application
VO(ADJ)
INH
1
12
+VIN
+VOUT
2,3,4
9,10,11
PT6340
+
+
5,6,7,8
CIN
COUT
GND
GND
Cin = Required 100µF electrolytic
Cout = Required 330µF electrolytic
For technical support and more information, see inside back cover or visit www.ti.com
PT6340 Series
6-A 12-V Input Adjustable
Integrated Switching Regulator
Specifications (Unless otherwise stated, Ta =25°C, Vin =12V, Cin =100µF, Cout =330µF, and Io =Iomax)
PT6340 SERIES
Typ
Characteristic
Symbol
Conditions
Min
Max
Units
(1)
(1)
Output Current
Io
Ta =+60°C, 200LFM
0.1
0.1
—
—
6
6
A
Ta =+25°C, natural convection
Input Voltage Range
Set Point Voltage Tolerance
Temperature Variation
Line Regulation
Load Regulation
Total Output Voltage Variation
Vin
Over Io Range
10.8
—
—
—
—
—
1
0.5
5
13.2
2
—
10
15
VDC
%Vo
%Vo
mV
Vo tol
Regtemp
Regline
Regload
∆Votot
–40° ≤Ta ≤ +85°C, Io =Iomin
Over Vin range
Over Io range
Includes set-point, line, load,
–40° ≤Ta ≤ +85°C
5
mV
—
2
3
%Vo
Efficiency
η
Io =4A
Vo =5.0V
Vo =3.3V
Vo =2.5V
Vo =1.8V
Vo =1.5V
Vo =1.2V
—
—
—
—
—
—
93
92
91
89
87
85
—
—
—
—
—
—
%
Vo Ripple (pk-pk)
Vr
20MHz bandwidth
—
20
—
mVpp
Transient Response
ttr
∆Vtr
Isc threshold
ƒs
1A/µs load step, 50% to 100% Iomax—
Vo over/undershoot
50
—
µs
—
—
300
60
8.5
350
—
—
mV
A
Short Circuit Threshold
Switching Frequency
Over Vin and Io range
400
kHz
Inhibit (Pin 1)
Referenced to GND (pin 5)
(2)
High-Level Input Voltage
Low-Level Input Voltage
Low-Level Input Current
VIH
VIL
IIL
Vin–0.5
–0.2
—
—
330
100
—
—
–0.5
+0.5
—
—
—
Open
+0.5
–
—
1,000
—
V
mA
mA
µF
µF
°C
°C
Standby Input Current
External Output Capacitance
External Input Capacitance
Operating Temperature Range
Storage Temperature
Iin standby
Cout
Cin
pins 1 & 5 connected
See application schematic
See application schematic
Over Vin range
(3)
(4)
T
–40
+85
+125
a
T
s
—
–40
—
Reliability
MTBF
Per Bellcore TR-332
6
8.8
—
—
—
10 Hrs
50% stress, Ta =40°C, ground benign
Mechanical Shock
—
Per Mil-Std-883D, method 2002.3,
1ms, half-sine, mounted to a fixture
—
500
G’s
Mechanical Vibration
—
Mil-Std-883D, Method 2007.2,
20-2000Hz, soldered in PCB
(5)
—
—
20
23
—
—
G’s
Weight
Flammability
—
—
grams
Materials meet UL 94V-0
Notes: (1) The ISR will operate at no load with reduced specifications.
(2) The Inhibit control (pin 1) has an internal pull-up and if it is left open circuit the module will operate when input poweris applied. The open-circuit
voltage is the input voltage Vin. Use a discrete MOSFET to control the Inhibit pin, and ensure a transitioin time of less than ≤10µs. Consult the related
application note for other interface considerations.
(3) For operation below 0°C, Cin and Cout must have stable characteristics. Use either low ESR tantalum or Oscon® capacitors.
(4) See Safe Operating Area curves or contact the factory for the appropriate derating.
(5) The case pins on through-hole package types (suffixes N & A) must be soldered. For more information consult the applicable package outline drawing.
Input/Output Capacitors: The PT6340 regulator series requires a 100µF electrolytic (or tantalum) capacitor at the input and 330µF at the output for proper
operation in all applications. In addition, the input capacitance, Cin, must be rated for a minimum of 740mArms of ripple current, and the ESR of the output
capacitor, Cout, must less than 50mΩ @100kHz. For transient or dynamic load applications additional output capacitance may be necessary. For more information
consult the related application note on capacitor recommendations.
For technical support and more information, see inside back cover or visit www.ti.com
Typical Characteristics
PT6340 Series
6-A 12-V Input Adjustable
Integrated Switching Regulator
PT6340 Series Performance; @VIN =12.0V (See Note A)
Safe Operating Area (See Note B)
Efficiency Vs Output Current
PT6341, Vo =5.0V, Vin =12V
100
90
80
70
60
50
40
30
20
90
Airflow
200LFM
120LFM
60LFM
PT6341
80
70
60
50
PT6342
PT6343
PT6344
PT6345
PT6346
Nat conv
0
1
2
3
4
5
5
5
6
6
6
0
1
2
3
4
5
6
Iout (A)
Iout (A)
Ripple Vs Output Current
PT6342, Vo =3.3V, Vin =12V
50
40
30
20
10
0
90
80
70
60
50
40
30
20
Airflow
200LFM
120LFM
60LFM
PT6341
PT6342
PT6343
PT6344
PT6345
PT6346
Nat conv
0
1
2
3
4
0
1
2
3
4
5
6
Iout (A)
Iout (A)
Power Dissipation Vs Output Current
PT6345, Vo =1.5V, Vin =12V
2.5
2
90
80
70
60
50
40
30
20
Airflow
200LFM
120LFM
60LFM
PT6341
PT6342
PT6343
PT6344
PT6345
PT6346
1.5
1
Nat conv
0.5
0
0
1
2
3
4
0
1
2
3
4
5
6
Iout (A)
Iout (A)
Note A: Characteristic data has been developed from actual products tested at 25°C. This data is considered typical data for the Converter.
Note B: SOA curves represent the conditions at which internal components are at or below the manufacturer’s maximum operating temperatures
For technical support and more information, see inside back cover or visit www.ti.com
Application Notes
PT6340 Series
Figure 1
Using the Inhibit Function on the PT6340
12V Bus Excalibur™ Series Converters
+12V
+3.3V
2,3,4
9,10,11
The PT6340 series are high efficiency regulators that
are designed to operate off a 12V input bus. These devices
incorporate an inhibit function, which may be used in
applications that require a power-up/shutdown feature.
Vin
V o
PT6342
Inhibit*
GND
5–8
V o(adj)
1
12
+
+
C in
C out
The inhibit function is provided by the Inhibit* control,
pin 1. If pin 1 is left open-circuit the regulator operates
normally, and provides a regulated output whenever a valid
supply voltage is applied to Vin (pins 2– 4) with respect
C O M
C O M
Q 1
B S S 1 3 8
2
to GND (pins 5–8). If a low voltage is then applied to
Inhibit
pin 1 the regulator output will be disabled and the input
4
current drawn by the ISR will typically drop to 0.5mA .
The standby control may also be used to hold-off the
regulator output during the period that input power is
applied.
Turn-On Time: In the circuit of Figure 1, turning Q1 on
applies a low voltage to the Inhibit* control (pin 1) and
disables the regulator ouput. Correspondingly, turning
Q1 off removes the low-voltage signal and enables the
output. Once enabled, the output will typically experience
a 10–15ms delay followed by a predictable ramp-up of
voltage. The regulator should provide a fully regulated
output voltage within 30ms. The waveform of Figure 2
shows the output voltage response of a PT6342 (3.3V)
following the turn-off of Q1. The turn off of Q1 corre-
sponds to the rise in Vinh. The waveforms were measured
with a 12Vdc input voltage, and 2 ½ Adc load.
The Inhibit* input can be controlled with an open-collector
(or open-drain) discrete transistor (See Figure 1). The
1
input is internally pulled-up to the input voltage, Vin
Table 1 gives the control voltage requirements.
.
Table 1 Inhibit Control Requirements 3
Parameter
Min
Typ
Max
VIL
VIH
IIL
-0.1V
2.0V
0.6V
Vin
0.5mA
Notes:
1. The inhibit control input requires no external pull-up
Figure 2
resistor. The open-circuit voltage of the Inhibit* input is
typically the input voltage, Vin.
2. The inhibit control input is Not compatible with TTL
devices. An open-collector device, preferably a discrete
bipolar transistor (or MOSFET) is recommended. To
ensure the regulator output is disabled, the control pin
must be pulled to less than 0.6Vdc with a low-level
0.5mA sink to ground.
Vo (2V/Div)
Iin (0.5A/Div)
3. An external source voltage can be used to control the
Inhibit* pin. To guarantee the inhibit and enable status
of the regulator, the source must be capable of meeting
the voltage requirements in Table 1 .
Vinh (10V/Div)
4. When the regulator output is disabled the current drawn
from the input source is typically reduced to 0.5mA.
HORIZ SCALE: 5ms/Div
For technical support and more information, see inside back cover or visit www.ti.com
Application Notes
PT6340 Series
Capacitor Recommendations for the PT6340
6A Excalibur™ Regulator Series
Input Capacitors:
Tantalum Capacitors
Output Current ≤4A Continuous (Table 1)
Tantalums are acceptable on the output bus but only the
AVX TPS series, Sprague 593D/594/595 series or Kemet
T495/T510 series. These capacitors are recommended
over many other types due to their higher rated surge,
power dissipation, and ripple current capability. As a
caution, the TAJ series by AVX is not recommended. This
series exhibits considerably higher ESR and lower ripple
current capability. The TAJ series is also less reliable than
the TPS series when determining power dissipation
capability. Tantalum or Oscon capacitor types are recom-
mended for applications where ambient temperatures fall
below 0°C.
The recommended input capacitance is determined by
740 milli-amperes (rms) minimum ripple current rating,
less than 100mΩ ESR (equivalent series resistance),
and 100µF minimum capacitance. The ripple current
rating, ESR, and operating temperature are the major
considerations when selecting the input capacitor.
It is recommended that tantalum capacitors have a
minimum voltage rating of twice (2×) the maximum dc
voltage, plus the ac ripple. This is necessary to insure
reliability with 12V input voltage bus applications. None
of the 100µF tantalum capacitors were found to meet
this requirement.
Capacitor Tables
Table 1 and Table 2 identify the vendors with acceptable
ESR and maximum allowable ripple current (rms) ratings.
The output capacitors are identified in both tables under
the “Output Bus” column with the required quantity.
Input Capacitors:
Output Current >4A Continuous (Table 2)
The recommended input capacitance is determined by
1.0 amperes (rms) minimum ripple current rating and
100µF minimum capacitance. The ripple current rating,
combined with less than 100mΩ ESR (equivalent series
resistance) value are the major considerations, along
with temperature, when selecting the input capacitor.
The input capacitors are listed in both tables. Table 1 has
the recommended input capacitors when operating the
ISR at a load current of 4Adc or less, and Table 2 identi-
fies input capacitors for ISR load currents greater than
4Adc.
It is recommended that tantalum capacitors have a
minimum voltage rating of twice (2×) the maximum dc
voltage, plus the ac ripple. This is necessary to insure
reliability for 12V input voltage bus applications. None
of the 100µF tantalum capacitors were found to meet
this requirement.
This is not an extensive capacitor list. Capacitors from other
vendors are available with comparable specifications. Those listed
are for guidance. The RMS ripple current rating and ESR
(Equivalent Series Resistance at 100kHz) are critical parameters
necessary to insure both optimum regulator performance and
long capacitor life.
Output Capacitors:
Output Current 0–6A (Table 1 & Table 2)
The ESR of the required capacitor must be less than,
or equal to 50mΩ. Electrolytic capacitors have poor
ripple performance at frequencies greater than 400kHz
but excellent low frequency transient response. Above
the ripple frequency, ceramic decoupling capacitors are
necessary to improve the transient response and reduce
any high frequency noise components apparent during
higher current excursions. Preferred low ESR type
capacitor’s part numbers are identified in the capacitor
tables.
For technical support and more information, see inside back cover or visit www.ti.com
Application Notes continued
PT6340 Series
Table 1: Input/Output Capacitors (Output Current ≤4 Amperes Continuous)
Capacitor Characteristics
Quantity
Capacitor Vendor/
Component
Series
Working
Voltage
(ESR) Equivalent
Max Ripple Current
Physical
Size (mm)
Input
Output
Bus
Value(µF)
Vendor Number
Series Resistance
@85°C (Irms)
Bus
Panasonic FC (Radial)
FC (Surface Mount)
35V
35V
50V
220µF
180µF
680µF
0.09Ω ÷2
0.09Ω ÷2
0.048Ω
755mA
755mA
1835mA
10 ×12.5
10 ×12.5
16 ×20
1
1
1
2
2
1
EEUFC1V221
EEUFC1V181
EEUFC1H681
63V
35V
35V
220µF
330µF
470µF
0.09Ω ÷2
0.12Ω ÷3
0.043Ω
1410mA
1205mA
1690mA
16 ×16.5
12.5 ×16
16 ×16.5
1
1
1
2
3
1
EEVFC1J221N
EEVFC1V331LQ
EEVFC1V471N
United Chemi-Con,
LXV/LXZ
50V
35V
120µF
220µF
0.12Ω ÷3
0.09Ω ÷2
755mA
760mA
10 ×16
10 ×12.5
1
1
3
2
LXV50VB121M10X16LL
LXZ35VB221M10X12LL
FS
10V
20V
330µF
150µF
0.025Ω
0.03Ω ÷2
3500mA
3200mA
10 ×10.5
10 ×10.5
N/R
1
1
2
10FS330M
20FS150M
Nichicon, PL
35V
35V
560µF
330µF
0.048Ω
0.065Ω ÷2
1360mA
1020mA
16 ×15
12.5 ×15
1
1
1
2
UPL1V561MHH6
UPL1V331MHH6
PM
50V
10V
470µF
330µF
0.046Ω
0.025Ω
1470mA
18 ×15
1
1
1
UPM1H4711MHH6
10SS330M
Oscon, SS (Radial)
>3500mA
10.0 ×10.5
N/R
SV (Surface Mount)
AVX Tantalum TPS
10V
20V
330µF
150µF
0.025Ω
0.024Ω ÷2
>3800mA
3600mA
10.3 ×10.3
10.3 ×10.3
N/R
1
1
2
10SV300M
20SV150M
10V
10V
25V
330µF
330µF
68µF
0.1Ω ÷2
0.1Ω ÷2
0.095Ω
>2500mA
>3000mA
>2000mA
7.3L
×4.3W
×4.1H
N/R
N/R
2
2
2
N/R
TPSV337M010R0100
TPSV337M010R0060
TPSV686M025R0095
Kemet, T510
T495
10V
10V
330µF
220µF
0.033Ω
0.07Ω ÷2
1400mA
>2000mA
7.3L ×5.7W
×4.0H
N/R
N/R
1
2
T510X337M010AS
T495X227M010AS
Sprague, 594D
10V
25V
330µF
68µF
0.0450Ω
0.095Ω
2350mA
1600mA
7.3L × 6.0W
×4.1H
N/R
2
1
N/R
594D337X0010R2T
594D686X0025R2T
N/R –Not recommended. The voltage rating does not meet the minimin operating limits.
Table 2: Input/Output Capacitors (Output Current >4 Amperes Continuous)
Capacitor Characteristics
Quantity
Capacitor Vendor/
Component
Series
Working
Voltage
(ESR) Equivalent
Max Ripple Current
Physical
Size (mm)
Input
Bus
Output
Bus
Value(µF)
Vendor Number
Series Resistance
@85°C (Irms)
Panasonic, FC (Radial)
FC (Surface Mount)
35V
35V
50V
680µF
560µF
680µF
0.043Ω
0.038Ω
0.048Ω
1655mA
1655mA
1835mA
12.5 ×20
12.5 ×20
16 ×20
1
1
1
1
1
1
EEUFC1V681
EEUFC1V561S
EEUFC1H681
63V
35V
35V
220µF
330µF
470µF
0.09÷2Ω
0.12÷3Ω
0.043Ω
1410mA
1205mA
1690mA
16 ×16.5
12.5 ×16
16 ×16.5
1
1
1
2
3
1
EEVFC1J221N
EEVFC1V331LQ
EEVFC1V471N
Un ited
35V
25V
10V
20V
330µF
820µF
390µF
150µF
0.068Ω
0.046Ω
0.030Ω
0.024Ω
1050mA
1340mA
3080mA
3200mA
10 ×16
12 ×20
8 ×10.5
8 ×10.5
1
1
N/R
1
2
1
1
2
LXZ35VB331M110X16LL
LXV25VB820M12X20LL
10FX390M
Chemi-con
LXV/LXZ/
FX/FS
20FX150M
Nichicon, PL
35V
35V
560µF
330µF
0.048Ω
0.06÷2Ω
1360mA
1020mA
16 ×15
12.5 ×15
1
1
1
2
UPL1V561MHH6
UPL1V331MHH6
PM
35V
10V
560µF
330µF
0.0048Ω
0.025Ω
1360mA
16 ×15
1
1
1
UPM1V561MHH6
10SS330M
Oscon, SS (Radial)
>3500mA
10.0 ×10.5
N/R
SV (Surface Mount)
AVX Tantalum, TPS
10V
20V
330µF
150µF
0.025Ω
0.02÷2Ω
>3800mA
3600mA
10.3 ×10.3
10.3 ×10.3
N/R
1
1
2
10SV330M
20SV150M
10V
10V
25V
330µF
330µF
68µF
0.1÷2Ω
0.1÷2Ω
0.095Ω
>2500mA
>3000mA
>2000mA
7.3L
×4.3W
×4.1H
N/R
N/R
2
2
2
N/R
TPSV337M010R0100
TPSV337M010R0060
TPSV686M025R0095
Kemet, T510
T495
10V
10V
330µF
220µF
0.033Ω
0.07Ω÷2
1400mA
>2000mA
7.3L x5.7W
×4.0H
N/R
N/R
1
2
T510X337M010AS
T495X227M010AS
Sprague, 594D
10V
25V
330µF
68µF
0.045Ω
0.095Ω
2350mA
1600mA
7.3L ×6.0W
×4.1H
N/R
2
1
N/R
594D337X0010R2T
594D686X0025R2T
N/R –Not recommended. The voltage rating does not meet the minimin operating limits.
For technical support and more information, see inside back cover or visit www.ti.com
Application Notes
PT6340 Series
Adjusting the Output Voltage of the PT6340
Excalibur 6 A, 12 V Bus Step-Down ISRs
The values of (R1) [adjust down], and R2 [adjust up], can
also be calculated using the following formulas. Refer to
Figure 1 and Table 2 for both the placement and value of the
required resistor; either (R1) or R2 as appropriate.
The output voltage of the PT6340 Series ISRs may be
adjusted higher or lower than the factory trimmed pre-
set voltage with the addition of a single external resistor.
Table 1 accordingly gives the allowable adjustment range
for each model for either series as Va (min) and Va (max).
Ro (Va – Vr)
(R1)
=
=
– Rs
– Rs
kΩ
kΩ
Vo – Va
Adjust Up: An increase in the output voltage is obtained by
adding a resistor R2, between pin 12 (Vo adj) and pins 5-8
(GND).
Vr · Ro
Va – Vo
R2
Adjust Down: Add a resistor (R1), between pin 12 (Vo adj) and
pins 9-11 (Vo).
Where:
V
= Original output voltage
= Adjusted output voltage
= Reference voltage (Table 1)
o
V
a
V
r
Figure 1
Ro = Resistance constant (Table 1)
Rs = Internal series resistance (Table 1)
2,3,4
9,10,11
V in
V o
Notes:
+VIN
PT6340
+VO
1. Use only a single 1% resistor in either the (R1) or R2
location. Place the resistor as close to the ISR as possible.
GND
Vo(adj)
5–8
12
(R1)
Adj Down
+
+
2. Never connect capacitors from Vo adj to either GND or
Vout. Any capacitance added to the Vo adjust pin will
affect the stability of the ISR.
C1
C2
R2
Adjust Up
C O M
C O M
Table 1
ISR ADJUSTMENT RANGE AND FORMULA PARAMETERS
Series Pt #
PT6341
PT6342
PT6343
PT6244
PT6345
PT6346
V (nom)
5.0
4.0
3.3
2.8
2.5
2.2
3.0
1.27
1.8
1.7
1.5
1.45
2.0
1.2
1.1
o
V (min)
a
V (max)
a
5.5
3.8
2.3
1.45
0.8
V (V)
r
1.27
10.0
24.9
1.27
10.0
24.9
1.27
10.0
24.9
1.27
10.0
24.9
R (kΩ)
o
10.0
24.9
10.0
24.9
R (kΩ)
s
For technical support and more information, see inside back cover or visit www.ti.com
Application Notes
PT6340 Series
Table 2
ISR ADJUSTMENT RESISTOR VALUES
Series Pt #
Vo (nom)
Va (req’d)
2.8
PT6341
5.0
PT6342
3.3V
Series Pt #
Vo (nom)
Va (req’d)
1.1
PT6343
2.5
PT6344
1.8
PT6345
1.5
PT6346
1.2V
(5.1)kΩ
(5.7)kΩ
(10.2)kΩ
(15.8)kΩ
(22.9)kΩ
(32.8)kΩ
(46.3)kΩ
(66.6)kΩ
(100.0)kΩ
(168.0)kΩ
(371.0)kΩ
1.15
1.2
(45.1)kΩ
2.85
2.9
2.95
3.0
3.05
3.1
3.15
3.2
3.25
3.3
3.35
3.4
3.45
3.5
3.6
3.7
3.8
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
5.1
5.2
5.3
5.4
5.5
1.25
1.3
135.0kΩ
55.1kΩ
28.4kΩ
15.1kΩ
7.1kΩ
1.35
1.4
1.45
1.5
(11.1)kΩ
1.55
1.6
229.0kΩ
102.0kΩ
59.8kΩ
38.6kΩ
25.9kΩ
17.4kΩ
11.4kΩ
6.9kΩ
1.65
1.7
229.0kΩ
102.0kΩ
59.8kΩ
38.6kΩ
17.4κΩ
6.9kΩ
(18.1)kΩ
(71.1)kΩ
1.75
1.8
1.85
1.9
229.0kΩ
102.0kΩ
59.8kΩ
38.6kΩ
25.9kΩ
17.4kΩ
11.4kΩ
6.9kΩ
1.95
2.0
3.3kΩ
0.5kΩ
0.5kΩ
(2.4)kΩ
(6.5)kΩ
2.05
2.1
(11.7)kΩ
(18.4)kΩ
(27.3)kΩ
(39.7)kΩ
(58.3)kΩ
(89.4)kΩ
(152.0)kΩ
(338.0)kΩ
2.15
2.2
(0.0)kΩ
(6.1)kΩ
2.25
2.3
(14.3)kΩ
(26.6)kΩ
(47.1)kΩ
(88.1)kΩ
(206.0)kΩ
3.3kΩ
0.5kΩ
2.35
2.4
2.45
2.5
2.55
2.6
229.0kΩ
102.0kΩ
59.8kΩ
38.6kΩ
25.9kΩ
17.4kΩ
11.4kΩ
6.9kΩ
102kΩ
38.6kΩ
17.4kΩ
6.9kΩ
0.5kΩ
2.65
2.7
2.75
2.8
2.85
2.9
2.95
3.4kΩ
3.0
0.5kΩ
R1 = (Blue)
R2 = Black
For technical support and more information, see inside back cover or visit www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, maskworkright, orotherTIintellectualpropertyrightrelatingtoanycombination, machine, orprocess
in which TI products or services are used. Information published by TI regarding third–party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2002, Texas Instruments Incorporated
©2020 ICPDF网 联系我们和版权申明