OPA990_V06 [TI]
OPAx990 40-V Rail-to-Rail Input/Output, Low Offset Voltage, Low Power Op Amp;型号: | OPA990_V06 |
厂家: | TEXAS INSTRUMENTS |
描述: | OPAx990 40-V Rail-to-Rail Input/Output, Low Offset Voltage, Low Power Op Amp |
文件: | 总76页 (文件大小:5336K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
OPAx990 40-V Rail-to-Rail Input/Output, Low Offset Voltage, Low Power Op Amp
1 Features
3 Description
The OPAx990 family (OPA990, OPA2990, and
OPA4990) is a family of high voltage (40-V) general
purpose operational amplifiers. These devices offer
excellent DC precision and AC performance,
including rail-to-rail input/output, low offset (±300 µV,
typ), and low offset drift (±0.6 µV/°C, typ).
1
•
Low offset voltage: ±300 µV
•
•
•
•
•
•
Low offset voltage drift: ±0.6 µV/°C
Low noise: 30 nV/√Hz at 1 kHz
High common-mode rejection: 115 dB
Low bias current: ±10 pA
Unique features such as differential and common-
mode input voltage range to the supply rail, high
short-circuit current (±80 mA), high slew rate (4.5
V/µs), and shutdown make the OPAx990 an
extremely flexible, robust, and high-performance op
amp for high-voltage industrial applications.
Rail-to-rail input and output
MUX-friendly/comparator inputs
–
Amplifier operates with differential inputs up to
supply rail
–
Amplifier can be used in open-loop or as
comparator
The OPAx990 family of op amps is available in micro-
size packages (such as X2QFN, WSON, and SOT-
553), as well as standard packages (such as SOT-23,
SOIC, and TSSOP), and is specified from –40°C to
125°C.
•
•
•
•
•
•
Wide bandwidth: 1.1-MHz GBW
High slew rate: 4.5 V/µs
Low quiescent current: 120 µA per amplifier
Wide supply: ±1.35 V to ±20 V, 2.7 V to 40 V
Robust EMIRR performance: 78 dB at 1.8 GHz
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
2.90 mm × 1.60 mm
2.90 mm × 1.60 mm
2.00 mm × 1.25 mm
1.60 mm × 1.20 mm
4.90 mm × 3.90 mm
2.90 mm × 1.60 mm
3.00 mm × 4.40 mm
3.00 mm × 3.00 mm
2.00 mm × 2.00 mm
2.00 mm × 1.50 mm
8.65 mm × 3.90 mm
5.00 mm × 4.40 mm
3.00 mm × 3.00 mm
2.00 mm × 2.00 mm
Differential and common-mode input voltage
range to supply rail
SOT-23 (5)
SOT-23 (6)
SC70 (5)
SOT-553 (5)(2)
OPA990
2 Applications
•
•
•
•
Multiplexed data-acquisition systems
Test and measurement equipment
SOIC (8)
SOT-23 (8)(2)
TSSOP (8)
VSSOP (8)(2)
WSON (8)
Motor drive: power stage and control modules
Power delivery: UPS, server, and merchant
network power
OPA2990
OPA4990
•
•
•
•
•
ADC driver and reference buffer amplifier
Programmable logic controllers
Analog input and output modules
High-side and low-side current sensing
High precision comparator
X2QFN (10)
SOIC (14)
TSSOP (14)
WQFN (16)(2)
X2QFN (14)(2)
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
(2) This package is preview only.
OPAx990 in a High-Voltage, Multiplexed, Data-Acquisition System
Analog Inputs
REF3140
RC Filter
OPA375
RC Filter
Bridge Sensor
Reference Driver
Gain Network
Gain Network
OPA990
+
MUX509
Thermocouple
REF
+
VINP
OPA990
Gain Network
Antialiasing
Filter
OPA990
+
ADS8860
Current Sensing
VINM
Photo
Detector
LED
High-Voltage Multiplexed Input
High-Voltage Level Translation
VCM
Optical Sensor
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
Table of Contents
7.4 Device Functional Modes........................................ 31
Application and Implementation ........................ 32
8.1 Application Information............................................ 32
8.2 Typical Applications ................................................ 32
Power Supply Recommendations...................... 34
1
2
3
4
5
6
Features.................................................................. 1
Applications ........................................................... 1
Description ............................................................. 1
Revision History..................................................... 2
Pin Configuration and Functions......................... 4
Specifications....................................................... 10
6.1 Absolute Maximum Ratings .................................... 10
6.2 ESD Ratings............................................................ 10
6.3 Recommended Operating Conditions..................... 10
6.4 Thermal Information for Single Channel ................. 10
6.5 Thermal Information for Dual Channel.................... 11
6.6 Thermal Information for Quad Channel .................. 11
6.7 Electrical Characteristics......................................... 12
6.8 Typical Characteristics............................................ 15
Detailed Description ............................................ 23
7.1 Overview ................................................................. 23
7.2 Functional Block Diagram ....................................... 23
7.3 Feature Description................................................. 24
8
9
10 Layout................................................................... 34
10.1 Layout Guidelines ................................................. 34
10.2 Layout Example .................................................... 34
11 Device and Documentation Support ................. 37
11.1 Device Support...................................................... 37
11.2 Documentation Support ........................................ 37
11.3 Related Links ........................................................ 37
11.4 Receiving Notification of Documentation Updates 38
11.5 Support Resources ............................................... 38
11.6 Trademarks........................................................... 38
11.7 Electrostatic Discharge Caution............................ 38
11.8 Glossary................................................................ 38
7
12 Mechanical, Packaging, and Orderable
Information ........................................................... 38
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision E (December 2019) to Revision F
Page
•
•
•
Removed preview notation from OPA2990 X2QFN (10) package from Device Information table ........................................ 1
Removed preview notation from OPA2990S RUG package (X2QFN) in the Pin Configuration and Functions section ....... 6
Changed RUG (X2QFN) in Thermal Information for Dual Channel section......................................................................... 10
Changes from Revision D (July 2019) to Revision E
Page
•
•
•
•
•
•
•
•
•
•
Changed the OPA990 and OPA4990 device statuses from Advance Information to Production Data ................................. 1
Removed preview notation from OPA990 SOT-23 (5) package from Device Information table............................................ 1
Removed preview notation from OPA990S SOT-23 (6) package from Device Information table.......................................... 1
Removed preview notation from OPA990 SC70 (5) package from Device Information table................................................ 1
Removed preview notation from OPA4990 SOIC (14) package from Device Information table............................................ 1
Removed preview notation from OPA4990 TSSOP (14) package from Device Information table ........................................ 1
Removed preview notation from OPA990 DBV package (SOT-23) in the Pin Configuration and Functions section............ 4
Removed preview notation from OPA990 DCK package (SC70) in the Pin Configuration and Functions section ............... 4
Removed preview notation from OPA990S DBV package (SOT-23) in the Pin Configuration and Functions section.......... 4
Removed preview notation from OPA4990 D (SOIC) and TSSOP (PW) packages in the Pin Configuration and
Functions section.................................................................................................................................................................... 7
Changes from Revision C (May 2019) to Revision D
Page
•
•
•
•
Removed preview notation from OPA2990 WSON (8) package from Device Information table ........................................... 1
Removed preview notation from OPA2990 DSG package (WSON) in the Pin Configuration and Functions section........... 5
Added SHUTDOWN to Electrical Characteristics table........................................................................................................ 13
Added Shutdown section to the Detailed Description section.............................................................................................. 31
2
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Changes from Revision B (April 2019) to Revision C
Page
•
•
Removed preview notation from OPA2990 TSSOP (8) package from Device Information table .......................................... 1
Removed preview notation from OPA2990 PW package (TSSOP) in the Pin Configuration and Functions section............ 5
Changes from Revision A (March 2019) to Revision B
Page
•
•
Removed preview notation from OPA2990 SOIC (8) package from Device Information table.............................................. 1
Removed preview notation from OPA2990 D package (SOIC) in the Pin Configuration and Functions section................... 5
Changes from Original (February 2019) to Revision A
Page
•
Changed the OPA2990 device status from Advance Information to Production Data........................................................... 1
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
5 Pin Configuration and Functions
OPA990 DBV and DRL Package(1)
5-Pin SOT-23 and SOT-553
Top View
OPA990 DCK Package
5-Pin SC70
Top View
OUT
Vœ
1
2
3
5
V+
IN+
Vœ
1
2
3
5
V+
IN+
4
INœ
INœ
4
OUT
Not to scale
Not to scale
(1) DRL package is preview only.
Pin Functions: OPA990
PIN
I/O
DESCRIPTION
NAME
DBV and DRL
DCK
IN+
IN–
3
4
1
5
2
1
3
4
5
2
I
Noninverting input
Inverting input
Output
I
OUT
V+
O
—
—
Positive (highest) power supply
Negative (lowest) power supply
V–
OPA990S DBV and DRL Package(1)
6-Pin SOT-23 and SOT-563
Top View
+IN
Vœ
1
2
3
6
5
4
V+
SHDN
OUT
œIN
Not to scale
(1) DRL package is preview only.
Pin Functions: OPA990S
PIN
I/O
DESCRIPTION
NAME
DBV and DRL
IN+
3
4
1
I
I
Noninverting input
Inverting input
Output
IN–
OUT
O
Shutdown: low = amplifier enabled, high = amplifier disabled. See Shutdown
section for more information.
SHDN
5
I
V+
V–
6
2
—
—
Positive (highest) power supply
Negative (lowest) power supply
4
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
OPA2990 D, DDF, DGK, and PW Packages(1)
8-Pin SOIC, SOT-23-8, TSSOP, and VSSOP
Top View
OPA2990 DSG Package(1)
8-Pin WSON With Exposed Thermal Pad
Top View
OUT1
IN1œ
IN1+
Vœ
1
2
3
4
8
7
6
5
V+
OUT2
IN2œ
IN2+
OUT1
IN1œ
IN1+
Vœ
1
2
3
4
8
7
6
5
V+
OUT2
IN2œ
IN2+
Thermal
Pad
Not to scale
(1) DDF and DGK packages are preview only.
Not to scale
(1) Connect thermal pad to V–. See Packages
With an Exposed Thermal Pad section for
more information.
Pin Functions: OPA2990
PIN
SOIC, TSSOP,
I/O
DESCRIPTION
NAME
VSSOP, and
WSON
IN1+
IN1–
IN2+
IN2–
OUT1
OUT2
V+
3
2
5
6
1
7
8
4
I
I
Noninverting input, channel 1
Inverting input, channel 1
Noninverting input, channel 2
Inverting input, channel 2
Output, channel 1
I
I
O
O
—
—
Output, channel 2
Positive (highest) power supply
Negative (lowest) power supply
V–
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
OPA2990S DGS Package(1)
10-Pin VSSOP
OPA2990S RUG Package(1)
10-Pin X2QFN
Top View
Top View
OUT1
IN1œ
1
2
3
4
5
10
9
V+
OUT2
IN2œ
IN2+
SHDN2
IN1+
8
Vœ
SHDN1
SHDN2
IN2+
1
2
3
4
9
8
7
6
IN1œ
OUT1
V+
Vœ
7
SHDN1
6
Not to scale
(1) Package is preview only.
OUT2
Not to scale
Pin Functions: OPA2990S
PIN
I/O
DESCRIPTION
NAME
IN1+
VSSOP
X2QFN
3
2
7
8
1
9
10
9
I
I
Noninverting input, channel 1
Inverting input, channel 1
IN1–
IN2+
IN2–
4
I
Noninverting input, channel 2
Inverting input, channel 2
Output, channel 1
5
I
OUT1
OUT2
8
O
O
6
Output, channel 2
Shutdown, channel 1: low = amplifier enabled, high = amplifier
disabled. See Shutdown section for more information.
SHDN 1
SHDN 2
5
6
2
3
I
I
Shutdown, channel 2: low = amplifier enabled, high = amplifier
disabled. See Shutdown section for more information.
V+
V–
10
4
7
1
—
—
Positive (highest) power supply
Negative (lowest) power supply
6
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
OPA4990 D and PW Packages
14-Pin SOIC and TSSOP
Top View
OPA4990 RUC Packages(1)
14-Pin X2QFN With Exposed Thermal Pad
Top View
OUT1
IN1œ
IN1+
V+
1
2
3
4
5
6
7
14
13
12
11
10
9
OUT4
IN4œ
IN4+
Vœ
IN1œ
IN1+
V+
1
2
3
4
5
12
11
10
9
IN4œ
IN4+
Vœ
IN2+
IN2œ
OUT2
IN3+
IN3œ
OUT3
8
IN2+
IN2œ
IN3+
IN3œ
Not to scale
8
OPA4990 RTE Package(1)(2)
16-Pin WQFN With Exposed Thermal Pad
Top View
Not to scale
(1) Package is preview only.
IN1+
V+
1
2
3
4
12
11
10
9
IN4+
Vœ
Thermal
Pad
IN2+
IN2œ
IN3+
IN3œ
Not to scale
(1) Connect thermal pad to V–. See Packages
With an Exposed Thermal Pad section for
more information.
(2) Package is preview only.
Pin Functions: OPA4990
PIN
I/O
DESCRIPTION
SOIC and
TSSOP
NAME
WQFN
X2QFN
IN1+
IN1–
IN2+
IN2–
IN3+
IN3–
3
2
1
16
3
2
1
4
5
9
8
I
I
I
I
I
I
Noninverting input, channel 1
Inverting input, channel 1
Noninverting input, channel 2
Inverting input, channel 2
Noninverting input, channel 3
Inverting input, channel 3
5
6
4
10
9
10
9
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
Pin Functions: OPA4990 (continued)
PIN
I/O
DESCRIPTION
SOIC and
TSSOP
NAME
IN4+
WQFN
X2QFN
12
13
—
1
12
13
6, 7
15
5
11
12
—
14
6
I
Noninverting input, channel 4
IN4–
NC
I
Inverting input, channel 4
Do not connect
—
O
O
O
O
—
—
OUT1
OUT2
OUT3
OUT4
V+
Output, channel 1
7
Output, channel 2
8
8
7
Output, channel 3
14
4
14
2
13
3
Output, channel 4
Positive (highest) power supply
Negative (lowest) power supply
V–
11
11
10
8
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
OPA4990S RTE Package(1)
16-Pin WQFN With Exposed Thermal Pad
Top View
IN1+
V+
1
2
3
4
12
11
10
9
IN4+
Vœ
Thermal
Pad
IN2+
IN2œ
IN3+
IN3œ
Not to scale
(1) Connect thermal pad to V–. See Packages With an Exposed Thermal Pad section for more information.
(2) Package is preview only.
Pin Functions: OPA4990S
PIN
I/O
DESCRIPTION
NAME
WQFN
1
IN1+
IN1–
IN2+
IN2–
IN3+
IN3–
IN4+
IN4–
OUT1
OUT2
OUT3
OUT4
I
I
Noninverting input, channel 1
Inverting input, channel 1
Noninverting input, channel 2
Inverting input, channel 2
Noninverting input, channel 3
Inverting input, channel 3
Noninverting input, channel 4
Inverting input, channel 4
Output, channel 1
16
3
I
4
I
10
9
I
I
12
13
15
5
I
I
O
O
O
O
Output, channel 2
8
Output, channel 3
14
Output, channel 4
Shutdown, channels 1 and 2: low = amplifiers enabled, high = amplifiers
disabled. See Shutdown section for more information.
SHDN12
SHDN34
6
7
I
I
Shutdown, channels 3 and 4: low = amplifiers enabled, high = amplifiers
disabled. See Shutdown section for more information.
VCC+
VCC–
2
—
—
Positive (highest) power supply
Negative (lowest) power supply
11
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating ambient temperature range (unless otherwise noted)(1)
MIN
0
MAX
42
UNIT
V
Supply voltage, VS = (V+) – (V–)
Common-mode voltage(2)
(V–) – 0.5
(V+) + 0.5
VS + 0.2
10
V
Signal input pins
Differential voltage(2)
Current(2)
V
–10
mA
Output short-circuit(3)
Continuous
Operating ambient temperature, TA
Junction temperature, TJ
Storage temperature, Tstg
–55
150
150
150
°C
°C
°C
–65
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input pins are diode-clamped to the power-supply rails. Input signals that may swing more than 0.5 V beyond the supply rails must be
current limited to 10 mA or less.
(3) Short-circuit to ground, one amplifier per package. Extended short-circuit current, especially with higher supply voltage, can cause
excessive heating and eventual destruction. See the Thermal Protection section for more information.
6.2 ESD Ratings
VALUE
±2000
±1000
UNIT
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)
Charged device model (CDM), per JEDEC specification JESD22-C101(2)
V(ESD)
Electrostatic discharge
V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating ambient temperature range (unless otherwise noted)
MIN
MAX
40
UNIT
V
VS
VI
Supply voltage, (V+) – (V–)
2.7
(V–) – 0.2
(V–) + 1.1
(V–)
Input voltage range
(V+) + 0.2
(V–) + 20 V(1)
(V–) + 0.2
125
V
VIH
VIL
TA
High level input voltage at shutdown pin (amplifier enabled)
Low level input voltage at shutdown pin (amplifier disabled)
Specified temperature
V
V
–40
°C
(1) Cannot exceed V+.
6.4 Thermal Information for Single Channel
OPA990, OPA990S
DBV
(SOT-23)
DCK
(SC70)
DRL(2)
(SOT-553)
THERMAL METRIC(1)
UNIT
5 PINS
6 PINS
1174.5
113.4
55.8
5 PINS
204.6
116.5
51.8
5 PINS
6 PINS
TBD
TBD
TBD
TBD
TBD
TBD
RθJA
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
192.1
113.6
60.5
37.2
60.3
N/A
TBD
TBD
TBD
TBD
TBD
TBD
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
RθJC(top)
RθJB
ψJT
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
39.6
24.9
ψJB
55.6
51.5
RθJC(bot)
N/A
N/A
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
(2) This package option is preview for OPA990.
10
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
6.5 Thermal Information for Dual Channel
OPA2990, OPA2990S
D
DDF(2)
(SOT-23-8)
DGK(2)
(VSSOP)
DGS(2)
(VSSOP)
DSG
(WSON)
PW
(TSSOP)
RUG
(X2QFN)
THERMAL METRIC(1)
UNIT
(SOIC)
8 PINS
8 PINS
8 PINS
10 PINS
8 PINS
8 PINS
10 PINS
Junction-to-ambient
thermal resistance
RθJA
138.7
TBD
189.3
152.2
81.6
188.4
149.6
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
Junction-to-case (top)
thermal resistance
RθJC(top)
78.7
82.2
27.8
81.4
N/A
TBD
TBD
TBD
TBD
TBD
75.8
111.0
15.4
67.3
95.5
67.9
94.3
N/A
101.6
48.3
6.0
77.1
119.1
14.2
58.3
77.7
1.3
Junction-to-board thermal
resistance
RθJB
Junction-to-top
characterization parameter
ψJT
Junction-to-board
characterization parameter
ψJB
109.3
N/A
48.3
22.8
117.4
N/A
77.5
N/A
Junction-to-case (bottom)
thermal resistance
RθJC(bot)
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
(2) This package option is preview for OPA2990.
6.6 Thermal Information for Quad Channel
OPA4990, OPA4990S
D
PW
(TSSOP)
RTE(2)
(WQFN)
RUC(2)
(WQFN)
THERMAL METRIC(1)
UNIT
(SOIC)
14 PINS
105.2
61.2
14 PINS
134.7
55.0
16 PINS
53.5
58.3
28.6
2.1
14 PINS
143.0
46.4
RθJA
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
RθJC(top)
RθJB
61.1
79.0
81.8
ψJT
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
21.4
9.2
1.0
ψJB
60.7
78.1
28.6
12.6
81.5
RθJC(bot)
N/A
N/A
N/A
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
(2) This package option is preview for OPA4990.
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
6.7 Electrical Characteristics
For VS = (V+) – (V–) = 2.7 V to 40 V (±1.35 V to ±20 V) at TA = 25°C, RL = 10 kΩ connected to VS / 2, VCM = VS / 2, and VOUT
= VS / 2, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
OFFSET VOLTAGE
±0.3
±1.5
VOS
Input offset voltage
VCM = V–
mV
TA = –40°C to 125°C
±1.75
dVOS/dT
PSRR
Input offset voltage drift
TA = –40°C to 125°C
±0.6
±0.1
±0.75
5
µV/℃
µV/V
µV/V
VCM = V–, VS = 4 V to 40 V
VCM = V–, VS = 2.7 V to 40 V(1)
f = 0 Hz
±1.3
±6.6
Input offset voltage versus
power supply
TA = –40°C to 125°C
Channel separation
INPUT BIAS CURRENT
IB
Input bias current
±10
±5
pA
pA
IOS
Input offset current
NOISE
6
1
µVPP
EN
Input voltage noise
f = 0.1 Hz to 10 Hz
µVRMS
f = 1 kHz
f = 10 kHz
f = 1 kHz
30
28
2
eN
iN
Input voltage noise density
Input current noise
nV/√Hz
fA/√Hz
INPUT VOLTAGE RANGE
Common-mode voltage
range
VCM
(V–) – 0.2
(V+) + 0.2
V
VS = 40 V, (V–) – 0.1 V < VCM
(V+) – 2 V (PMOS pair)
<
100
75
115
90
VS = 4 V, (V–) – 0.1 V < VCM
(V+) – 2 V (PMOS pair)
<
dB
VS = 2.7 V, (V–) – 0.1 V < VCM
(V+) – 2 V (PMOS pair)(1)
<
Common-mode rejection
ratio
70
90
CMRR
TA = –40°C to 125°C
VS = 2.7 – 40 V, (V+) – 1 V < VCM
< (V+) + 0.1 V (NMOS pair)
80
See Offset Voltage (Transition Region)
in the Typical Characteristics section
(V+) – 2 V < VCM < (V+) – 1 V
INPUT CAPACITANCE
ZID
Differential
100 || 3
6 || 1
MΩ || pF
ZICM
Common-mode
TΩ || pF
OPEN-LOOP GAIN
120
104
101
145
142
130
125
118
VS = 40 V, VCM = VS / 2,
(V–) + 0.1 V < VO < (V+) – 0.1 V
TA = –40°C to 125°C
TA = –40°C to 125°C
dB
VS = 4 V, VCM = VS / 2,
(V–) + 0.1 V < VO < (V+) – 0.1 V
AOL
Open-loop voltage gain
VS = 2.7 V, VCM = VS / 2,
dB
dB
(V–) + 0.1 V < VO < (V+) – 0.1
V(1)
TA = –40°C to 125°C
117
(1) Specified by characterization only.
12
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Electrical Characteristics (continued)
For VS = (V+) – (V–) = 2.7 V to 40 V (±1.35 V to ±20 V) at TA = 25°C, RL = 10 kΩ connected to VS / 2, VCM = VS / 2, and VOUT
= VS / 2, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
FREQUENCY RESPONSE
GBW
SR
Gain-bandwidth product
1.1
4.5
4
MHz
Slew rate
VS = 40 V, G = +1, CL = 20 pF
V/μs
To 0.1%, VS = 40 V, VSTEP = 10 V , G = +1, CL = 20 pF
To 0.1%, VS = 40 V, VSTEP = 2 V , G = +1, CL = 20 pF
To 0.01%, VS = 40 V, VSTEP = 10 V , G = +1, CL = 20 pF
To 0.01%, VS = 40 V, VSTEP = 2 V , G = +1, CL = 20 pF
G = +1, RL = 10 kΩ, CL = 20 pF
2
tS
Settling time
µs
5
3
Phase margin
60
600
°
Overload recovery time
VIN × gain > VS
ns
Total harmonic distortion +
noise
THD+N
VS = 40 V, VO = 1 VRMS, G = 1, f = 1 kHz
0.00162%
OUTPUT
VS = 40 V, RL = no
load
2
VS = 40 V, RL = 10 kΩ
45
60
VS = 40 V, RL = 2 kΩ
200
300
Positive and negative
rail headroom
Voltage output swing from
rail
mV
VS = 2.7 V, RL = no
load
1
5
VS = 2.7 V, RL = 10
kΩ
20
50
VS = 2.7 V, RL = 2 kΩ
25
ISC
Short-circuit current
Capacitive load drive
±80
mA
CLOAD
See Typical Characteristics section
Open-loop output
impedance
ZO
f = 1 MHz, IO = 0 A
575
Ω
POWER SUPPLY
120
130
40
150
160
170
175
OPA2990, OPA4990, IO = 0 A
TA = –40°C to 125°C
Quiescent current per
amplifier
IQ
µA
OPA990, IO = 0 A
TA = –40°C to 125°C
Turn-on time
At TA = 25°C, VS = 40 V, VS ramp rate > 0.3 V/µs
μs
SHUTDOWN
Quiescent current per
amplifier
VS = 2.7 V to 40 V, all amplifiers disabled, SHDN = V– + 1
V
IQSD
20
30
µA
Output impedance during
shutdown
ZSHDN
VIH
VS = 2.7 V to 40 V, amplifier disabled
10 || 12
GΩ || pF
Logic high threshold
voltage (amplifier disabled)
(V–) + 1.1
V
V
V
Logic low threshold voltage
(amplifier enabled)
VIL
(V–) + 0.2 V
(2)
tON
Amplifier enable time
G = +1, VCM = V–, VO = 0.1 × VS / 2
11
2.5
µs
µs
(2)
tOFF
Amplifier disable time
VCM = V–, VO = VS / 2
VS = 2.7 V to 40 V, (V–) + 20 V ≥ SHDN ≥ (V–) + 0.9 V
VS = 2.7 V to 40 V, (V–) ≤ SHDN ≤ (V–) + 0.7 V
500
150
SHDN pin input bias
current (per pin)
nA
(2) Disable time (tOFF) and enable time (tON) are defined as the time interval between the 50% point of the signal applied to the SHDN pin
and the point at which the output voltage reaches the 10% (disable) or 90% (enable) level.
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
Table 1. Table of Graphs
DESCRIPTION
FIGURE
Offset Voltage Production Distribution
Offset Voltage Drift Distribution
Figure 1
Figure 2
Offset Voltage vs Temperature
Figure 3, Figure 4
Offset Voltage vs Common-Mode Voltage
Offset Voltage vs Power Supply
Open-Loop Gain and Phase vs Frequency
Figure 5, Figure 6, Figure 7, Figure 8
Figure 9
Figure 10
Closed-Loop Gain and Phase vs Frequency
Input Bias Current vs Common-Mode Voltage
Input Bias Current vs Temperature
Output Voltage Swing vs Output Current
CMRR and PSRR vs Frequency
CMRR vs Temperature
Figure 11
Figure 12
Figure 13
Figure 14, Figure 15, Figure 16, Figure 17
Figure 18
Figure 19
PSRR vs Temperature
Figure 20
0.1-Hz to 10-Hz Noise
Figure 21
Input Voltage Noise Spectral Density vs Frequency
THD+N Ratio vs Frequency
Figure 22
Figure 23
THD+N vs Output Amplitude
Figure 24
Quiescent Current vs Supply Voltage
Quiescent Current vs Temperature
Open Loop Voltage Gain vs Temperature
Open Loop Output Impedance vs Frequency
Output Swing vs Supply Voltage
Small Signal Overshoot vs Capacitive Load (100-mV Output Step)
Phase Margin vs Capacitive Load
No Phase Reversal
Figure 25
Figure 26
Figure 27
Figure 28
Figure 29, Figure 30, Figure 31, Figure 32
Figure 33, Figure 34
Figure 35
Figure 36
Positive Overload Recovery
Figure 37
Negative Overload Recovery
Figure 38
Small-Signal Step Response (100 mV)
Large-Signal Step Response
Figure 39, Figure 40
Figure 41, Figure 42, Figure 43
Figure 44
Short-Circuit Current vs Temperature
Maximum Output Voltage vs Frequency
Channel Separation vs Frequency
EMIRR vs Frequency
Figure 45
Figure 46
Figure 47
14
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
6.8 Typical Characteristics
at TA = 25°C, VS = ±20 V, VCM = VS / 2, RLOAD = 10 kΩ connected to VS / 2, and CL = 10 pF (unless otherwise noted)
25%
20%
15%
10%
5%
25%
20%
15%
10%
5%
0
0
D001
Offset Voltage (mV)
Offset Voltage Drift (mV/èC)
D002
Distribution from 15526 amplifiers, TA = 25°C
Distribution from 190 amplifiers
Figure 1. Offset Voltage Production Distribution
Figure 2. Offset Voltage Drift Distribution
1000
800
800
600
400
200
0
600
400
200
0
-200
-400
-600
-800
-1000
-200
-400
-600
-800
-40
-20
0
20
40 60
Temperature (°C)
80
100 120 140
-40
-20
0
20
40 60
Temperature (°C)
80
100 120 140
D003
D004
VCM = V+
VCM = V–
Figure 3. Offset Voltage vs Temperature
Figure 4. Offset Voltage vs Temperature
800
600
400
200
0
800
600
400
200
0
-200
-400
-600
-800
-200
-400
-600
-800
-20 -16 -12
-8
-4
Common Mode Voltage (V)
0
4
8
12
16
20
16
16.5
17
17.5
Common Mode Voltage (V)
18
18.5
19
19.5
20
D005
D005
TA = 25°C
TA = 25°C
Figure 5. Offset Voltage vs Common-Mode Voltage
Figure 6. Offset Voltage vs Common-Mode Voltage
(Transition Region)
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
15
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
Typical Characteristics (continued)
at TA = 25°C, VS = ±20 V, VCM = VS / 2, RLOAD = 10 kΩ connected to VS / 2, and CL = 10 pF (unless otherwise noted)
1000
800
800
600
600
400
400
200
200
0
0
-200
-400
-600
-800
-1000
-1200
-200
-400
-600
-800
-1000
-20 -16 -12
-8
-4
Common Mode Voltage (V)
0
4
8
12
16
20
-20 -16 -12
-8
-4
Common Mode Voltage (V)
0
4
8
12
16
20
D006
D007
TA = 125°C
TA = –40°C
Figure 7. Offset Voltage vs Common-Mode Voltage
Figure 8. Offset Voltage vs Common-Mode Voltage
750
600
450
300
150
0
100
80
60
40
20
0
150
Gain
Phase
125
100
75
50
25
0
-150
-300
-450
-600
-750
-20
0
4
8
12 16 20 24 28 32 36 40 44
Supply Voltage (V)
100
1k
10k
Frequency (Hz)
100k
1M
D008
C002
CL = 20 pF
Figure 9. Offset Voltage vs Power Supply
Figure 10. Open-Loop Gain and Phase vs Frequency
70
60
50
40
30
20
10
0
3
G = 1
G = -1
G = 10
G = 100
G = 1000
IB-
IB+
IOS
2.5
2
1.5
1
0.5
0
-0.5
-1
-10
-20
-30
-1.5
-2
-2.5
100
1k
10k
Frequency (Hz)
100k
1M
-20 -16 -12
-8
-4
0
4
8
Common Mode Voltage (V)
12
16
20
C001
D010
Figure 11. Closed-Loop Gain vs Frequency
Figure 12. Input Bias Current vs Common-Mode Voltage
16
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Typical Characteristics (continued)
at TA = 25°C, VS = ±20 V, VCM = VS / 2, RLOAD = 10 kΩ connected to VS / 2, and CL = 10 pF (unless otherwise noted)
V+
V+ ꢀ 1 V
V+ ꢀ 2 V
V+ ꢀ 3 V
V+ ꢀ 4 V
V+ ꢀ 5 V
V+ ꢀ 6 V
V+ ꢀ 7 V
V+ ꢀ 8 V
V+ ꢀ 9 V
V+ ꢀ 10 V
320
280
240
200
160
120
80
IB-
IB+
IOS
-40°C
25°C
85°C
125°C
40
0
-40
-40
0
10
20
30
40
50
60
70
80
90 100
-20
0
20
40 60
Temperature (°C)
80
100 120 140
Output Current (mA)
D012
D011
Figure 14. Output Voltage Swing vs Output Current
(Sourcing)
Figure 13. Input Bias Current vs Temperature
Vꢀ + 10 V
Vꢀ + 9 V
Vꢀ + 8 V
Vꢀ + 7 V
Vꢀ + 6 V
Vꢀ + 5 V
Vꢀ + 4 V
Vꢀ + 3 V
Vꢀ + 2 V
Vꢀ + 1 V
Vꢀ
5
4.5
4
-40°C
25°C
85°C
125°C
-40èC
3.5
3
25èC
125èC
2.5
2
85èC
1.5
1
0.5
0
0
10
20
30
40
50
60
70
80
90 100
0
10
20
30
40
50
60
Output Current (mA)
70
80
90 100
Output Current (mA)
D012
D013
VS = 5 V
Figure 15. Output Voltage Swing vs Output Current
(Sinking)
Figure 16. Output Voltage Swing vs Output Current
(Sourcing)
110
100
90
80
70
60
50
40
30
20
10
0
5
4.5
4
PSRR+
PSRR-
CMRR
3.5
3
85èC
2.5
2
125èC
1.5
1
-40èC
25èC
0.5
0
0
10
20
30
40
50
60
Output Current (mA)
70
80
90 100
100
1k
10k 100k
Frequency (Hz)
1M
10M
D013
C003
VS = 5 V
Figure 17. Output Voltage Swing vs Output Current
(Sinking)
Figure 18. CMRR and PSRR vs Frequency
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
17
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
Typical Characteristics (continued)
at TA = 25°C, VS = ±20 V, VCM = VS / 2, RLOAD = 10 kΩ connected to VS / 2, and CL = 10 pF (unless otherwise noted)
124
120
116
112
108
104
100
96
145
144
143
142
141
140
139
138
137
136
135
VS = 40 V
VS = 4 V
92
88
-40
-20
0
20
40 60
Temperature (°C)
80
100 120 140
-40
-20
0
20
40 60
Temperature (°C)
80
100 120 140
D015
D016
f = 0 Hz
f = 0 Hz
Figure 19. CMRR vs Temperature (dB)
Figure 20. PSRR vs Temperature (dB)
120
110
100
90
80
70
60
50
40
30
20
10
0
Time (1s/Div)
10
100
1k
Frequency (Hz)
10k
100k
C015
C017
Figure 21. 0.1-Hz to 10-Hz Noise
Figure 22. Input Voltage Noise Spectral Density vs
Frequency
-40
-50
-30
-40
-50
-60
-70
-80
-90
-100
RL = 10 kW
RL = 2 kW
RL = 600 W
RL = 128 W
-60
-70
-80
-90
RL = 10 kW
RL = 2 kW
RL = 549 W
RL = 128 W
-100
-110
100
1k
Frequency (Hz)
10k
0.001
0.01
0.1
Amplitude (VRMS)
1
10 20
C012
C023
BW = 80 kHz, VOUT = 1 VRMS
Figure 23. THD+N Ratio vs Frequency
BW = 80 kHz, f = 1 kHz
Figure 24. THD+N vs Output Amplitude
18
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Typical Characteristics (continued)
at TA = 25°C, VS = ±20 V, VCM = VS / 2, RLOAD = 10 kΩ connected to VS / 2, and CL = 10 pF (unless otherwise noted)
130
125
120
115
110
105
100
95
127.5
125
122.5
120
117.5
115
112.5
110
107.5
105
90
85
102.5
0
4
8
12
16
Supply Voltage (V)
20
24
28
32
36
40
-40
-20
0
20
40 60
Temperature (°C)
80
100 120 140
D021
D022
VCM = V–
Figure 25. Quiescent Current vs Supply Voltage
Figure 26. Quiescent Current vs Temperature
146
780
720
660
600
540
480
420
360
300
240
180
120
144
142
140
138
136
134
132
130
128
126
124
VS = 40 V
VS = 4 V
-40
-20
0
20
40 60
Temperature (°C)
80
100 120 140
100
1k
10k 100k
Frequency (Hz)
1M
10M
D023
C013
Figure 27. Open-Loop Voltage Gain vs Temperature (dB)
Figure 28. Open-Loop Output Impedance vs Frequency
200
180
160
140
120
100
80
0
-20
-40
-60
-80
-100
-120
-140
-160
-180
-200
-220
60
40
20
0
0
4
8
12
16
20
24
Supply Voltage (V)
28
32
36
40
0
4
8
12
16
20
24
Supply Voltage (V)
28
32
36
40
D026
D026
RL = 2 kΩ
RL = 2 kΩ
Figure 29. Output Swing vs Supply Voltage, Positive Swing
Figure 30. Output Swing vs Supply Voltage, Negative Swing
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
19
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
Typical Characteristics (continued)
at TA = 25°C, VS = ±20 V, VCM = VS / 2, RLOAD = 10 kΩ connected to VS / 2, and CL = 10 pF (unless otherwise noted)
40
36
32
28
24
20
16
12
8
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
4
0
0
4
8
12
16
20
24
Supply Voltage (V)
28
32
36
40
0
4
8
12
16
20
24
Supply Voltage (V)
28
32
36
40
D027
D027
RL = 10 kΩ
RL = 10 kΩ
Figure 31. Output Swing vs Supply Voltage, Positive Swing
Figure 32. Output Swing vs Supply Voltage, Negative Swing
33
30
27
24
21
18
15
55
50
45
40
35
30
25
12
20
RISO = 0 W, Positive Overshoot
RISO = 0 W, Positive Overshoot
9
15
RISO = 0 W, Negative Overshoot
RISO = 0 W, Negative Overshoot
RISO = 50 W, Positive Overshoot
RISO = 50 W, Negative Overshoot
RISO = 50 W, Positive Overshoot
RISO = 50 W, Negative Overshoot
6
10
3
5
0
40
80
120 160 200 240 280 320 360
Cap Load (pF)
0
40
80
120 160 200 240 280 320 360
Cap Load (pF)
C007
C008
G = –1, 10-mV output step
G = 1, 10-mV output step
Figure 33. Small-Signal Overshoot vs Capacitive Load
Figure 34. Small-Signal Overshoot vs Capacitive Load
64
Input
Output
60
56
52
48
44
40
36
32
28
24
20
Time (20µs/Div)
0
100 200 300 400 500 600 700 800 900 1000
Cap Load (pF)
C016
C009
VIN = ±20 V; VS = VOUT = ±17 V
Figure 36. No Phase Reversal
Figure 35. Phase Margin vs Capacitive Load
20
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Typical Characteristics (continued)
at TA = 25°C, VS = ±20 V, VCM = VS / 2, RLOAD = 10 kΩ connected to VS / 2, and CL = 10 pF (unless otherwise noted)
Input
Output
Input
Output
Time (500ns/div)
Time (500ns/div)
C018
C018
G = –10
G = –10
Figure 37. Positive Overload Recovery
Figure 38. Negative Overload Recovery
Input
Output
Input
Output
Time (2ms/div)
Time (1µs/div)
C010
C011
CL = 20 pF, G = 1, 20-mV step response
Figure 39. Small-Signal Step Response
Input
CL = 20 pF, G = –1, 20-mV step response
Figure 40. Small-Signal Step Response
Output
Input
Output
Time (1µs/div)
Time (1µs/div)
C005
C005
CL = 20 pF, G = 1
CL = 20 pF, G = 1
Figure 41. Large-Signal Step Response (Falling)
Figure 42. Large-Signal Step Response (Rising)
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
21
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
Typical Characteristics (continued)
at TA = 25°C, VS = ±20 V, VCM = VS / 2, RLOAD = 10 kΩ connected to VS / 2, and CL = 10 pF (unless otherwise noted)
100
80
60
Input
Output
40
20
Sourcing
Sinking
0
-20
-40
-60
-80
-100
Time (2µs/div)
-40
-20
0
20
40 60
Temperature (°C)
80
100 120 140
C021
D038
CL = 20 pF, G = –1
Figure 43. Large-Signal Step Response
Figure 44. Short-Circuit Current vs Temperature
20
15
10
5
-60
-70
VS = 15 V
VS = 2.7 V
-80
-90
-100
-110
-120
-130
0
1k
10k
100k
Frequency (Hz)
1M
10M
100
1k
10k 100k
Frequency (Hz)
1M
10M
C020
C014
Figure 45. Maximum Output Voltage vs Frequency
Figure 46. Channel Separation vs Frequency
100
90
80
70
60
50
40
30
1M
10M
100M
Frequency (Hz)
1G
C004
Figure 47. EMIRR (Electromagnetic Interference Rejection Ratio) vs Frequency
22
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
7 Detailed Description
7.1 Overview
The OPAx990 family (OPA990, OPA2990, and OPA4990) is a family of high voltage (40-V) general purpose
operational amplifiers.
These devices offer excellent DC precision and AC performance, including rail-to-rail input/output, low offset
(±300 µV, typ), and low offset drift (±0.6 µV/°C, typ).
Unique features such as differential and common-mode input voltage range to the supply rail, high short-circuit
current (±80 mA), high slew rate (4.5 V/µs), and shutdown make the OPAx990 an extremely flexible, robust, and
high-performance operational amplifier for high-voltage industrial applications.
7.2 Functional Block Diagram
+
NCH Input
Stage
œ
IN+
+
40-V
OUT
Output
Stage
Differential
MUX-Friendly
Front End
Slew
Boost
Shutdown
Circuitry
œ
IN-
+
PCH Input
Stage
œ
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
23
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
7.3 Feature Description
7.3.1 Input Protection Circuitry
The OPAx990 uses a unique input architecture to eliminate the requirement for input protection diodes but still
provides robust input protection under transient conditions. Figure 48 shows conventional input diode protection
schemes that are activated by fast transient step responses and introduce signal distortion and settling time
delays because of alternate current paths, as shown in Figure 49. For low-gain circuits, these fast-ramping input
signals forward-bias back-to-back diodes, causing an increase in input current and resulting in extended settling
time.
V+
V+
VIN+
VIN+
VOUT
VOUT
OPAx990
~0.7 V
40 V
VIN-
VIN-
V-
V-
OPAx990 Provides Full 40-V
Differential Input Range
Conventional Input Protection
Limits Differential Input Range
Figure 48. OPAx990 Input Protection Does Not Limit Differential Input Capability
1
Ron_mux
Vn = 10 V
RFILT
10 V
Sn
D
1
2
~œ9.3 V
10 V
CFILT
CS
CD
VINœ
2
Ron_mux
Sn+1
Vn+1 = œ10 V RFILT
œ10 V
~0.7 V
VOUT
CFILT
CS
Idiode_transient
VIN+
œ10 V
Input Low-Pass Filter
Simplified Mux Model
Buffer Amplifier
Figure 49. Back-to-Back Diodes Create Settling Issues
The OPAx990 family of operational amplifiers provides a true high-impedance differential input capability for high-
voltage applications using a patented input protection architecture that does not introduce additional signal
distortion or delayed settling time, making the device an optimal op amp for multichannel, high-switched, input
applications. The OPA990 tolerates a maximum differential swing (voltage between inverting and non-inverting
pins of the op amp) of up to 40 V, making the device suitable for use as a comparator or in applications with fast-
ramping input signals such as data-acquisition systems; see the TI TechNote MUX-Friendly Precision
Operational Amplifiers for more information.
24
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Feature Description (continued)
7.3.2 EMI Rejection
The OPAx990 uses integrated electromagnetic interference (EMI) filtering to reduce the effects of EMI from
sources such as wireless communications and densely-populated boards with a mix of analog signal chain and
digital components. EMI immunity can be improved with circuit design techniques; the OPAx990 benefits from
these design improvements. Texas Instruments has developed the ability to accurately measure and quantify the
immunity of an operational amplifier over a broad frequency spectrum extending from 10 MHz to 6 GHz.
Figure 50 shows the results of this testing on the OPAx990. Table 2 shows the EMIRR IN+ values for the
OPAx990 at particular frequencies commonly encountered in real-world applications. The EMI Rejection Ratio of
Operational Amplifiers application report contains detailed information on the topic of EMIRR performance as it
relates to op amps and is available for download from www.ti.com.
100
90
80
70
60
50
40
30
1M
10M
100M
Frequency (Hz)
1G
C004
Figure 50. EMIRR Testing
Table 2. OPA990 EMIRR IN+ For Frequencies of Interest
FREQUENCY
APPLICATION OR ALLOCATION
EMIRR IN+
Mobile radio, mobile satellite, space operation, weather, radar, ultra-high frequency (UHF)
applications
400 MHz
59.5 dB
Global system for mobile communications (GSM) applications, radio communication, navigation,
GPS (to 1.6 GHz), GSM, aeronautical mobile, UHF applications
900 MHz
1.8 GHz
2.4 GHz
3.6 GHz
5 GHz
68.9 dB
77.8 dB
78.0 dB
88.8 dB
87.6 dB
GSM applications, mobile personal communications, broadband, satellite, L-band (1 GHz to 2 GHz)
802.11b, 802.11g, 802.11n, Bluetooth®, mobile personal communications, industrial, scientific and
medical (ISM) radio band, amateur radio and satellite, S-band (2 GHz to 4 GHz)
Radiolocation, aero communication and navigation, satellite, mobile, S-band
802.11a, 802.11n, aero communication and navigation, mobile communication, space and satellite
operation, C-band (4 GHz to 8 GHz)
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
25
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
7.3.3 Thermal Protection
The internal power dissipation of any amplifier causes its internal (junction) temperature to rise. This
phenomenon is called self heating. The absolute maximum junction temperature of the OPAx990 is 150°C.
Exceeding this temperature causes damage to the device. The OPAx990 has a thermal protection feature that
reduces damage from self heating. The protection works by monitoring the temperature of the device and turning
off the op amp output drive for temperatures above 170°C. Figure 51 shows an application example for the
OPA990 that has significant self heating because of its power dissipation (0.81 W). Thermal calculations indicate
that for an ambient temperature of 65°C, the device junction temperature must reach 177°C. The actual device,
however, turns off the output drive to recover towards a safe junction temperature. Figure 51 shows how the
circuit behaves during thermal protection. During normal operation, the device acts as a buffer so the output is 3
V. When self heating causes the device junction temperature to increase above the internal limit, the thermal
protection forces the output to a high-impedance state and the output is pulled to ground through resistor RL. If
the condition that caused excessive power dissipation is not removed, the amplifier will oscillate between a
shutdown and enabled state until the output fault is corrected.
3 V
TA = 65°C
30 V
PD = 0.81W
ꢀJA = 138.7°C/W
TJ = 138.7°C/W × 0.81W + 65°C
0 V
TJ = 177.3°C (expected)
-
OPA990
170ºC
+
IOUT = 30 mA
+
3 V
œ
RL
100 Ω
+
VIN
3 V
œ
Figure 51. Thermal Protection
7.3.4 Capacitive Load and Stability
The OPAx990 features a resistive output stage capable of driving moderate capacitive loads, and by leveraging
an isolation resistor, the device can easily be configured to drive large capacitive loads. Increasing the gain
enhances the ability of the amplifier to drive greater capacitive loads; see Figure 52 and Figure 53. The particular
op amp circuit configuration, layout, gain, and output loading are some of the factors to consider when
establishing whether an amplifier will be stable in operation.
55
50
45
40
35
30
25
20
15
10
5
33
30
27
24
21
18
15
12
9
RISO = 0 W, Positive Overshoot
RISO = 0 W, Negative Overshoot
RISO = 50 W, Positive Overshoot
RISO = 50 W, Negative Overshoot
RISO = 0 W, Positive Overshoot
RISO = 0 W, Negative Overshoot
RISO = 50 W, Positive Overshoot
RISO = 50 W, Negative Overshoot
6
3
0
40
80
120 160 200 240 280 320 360
Cap Load (pF)
0
40
80
120 160 200 240 280 320 360
Cap Load (pF)
C008
C007
Figure 52. Small-Signal Overshoot vs Capacitive Load
(10-mV Output Step, G = 1)
Figure 53. Small-Signal Overshoot vs Capacitive Load
(10-mV Output Step, G = –1)
26
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
For additional drive capability in unity-gain configurations, improve capacitive load drive by inserting a small
resistor, RISO, in series with the output, as shown in Figure 54. This resistor significantly reduces ringing and
maintains DC performance for purely capacitive loads. However, if a resistive load is in parallel with the
capacitive load, then a voltage divider is created, thus introducing a gain error at the output and slightly reducing
the output swing. The error introduced is proportional to the ratio RISO / RL, and is generally negligible at low
output levels. A high capacitive load drive makes the OPAx990 well suited for applications such as reference
buffers, MOSFET gate drives, and cable-shield drives. The circuit shown in Figure 54 uses an isolation resistor,
RISO, to stabilize the output of an op amp. RISO modifies the open-loop gain of the system for increased phase
margin.
+Vs
Vout
Riso
+
Cload
+
Vin
-Vs
œ
Figure 54. Extending Capacitive Load Drive With the OPA990
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
27
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
7.3.5 Common-Mode Voltage Range
The OPAx990 is a 40-V, true rail-to-rail input operational amplifier with an input common-mode range that
extends 200 mV beyond either supply rail. This wide range is achieved with paralleled complementary N-channel
and P-channel differential input pairs, as shown in Figure 55. The N-channel pair is active for input voltages
close to the positive rail, typically (V+) – 1 V to 100 mV above the positive supply. The P-channel pair is active
for inputs from 100 mV below the negative supply to approximately (V+) – 2 V. There is a small transition region,
typically (V+) – 2 V to (V+) – 1 V in which both input pairs are on. This transition region can vary modestly with
process variation, and within this region PSRR, CMRR, offset voltage, offset drift, noise, and THD performance
may be degraded compared to operation outside this region.
Figure 5 shows this transition region for a typical device in terms of input voltage offset in more detail.
For more information on common-mode voltage range and PMOS/NMOS pair interaction, see Op Amps With
Complementary-Pair Input Stages application note.
V+
IN-
PMOS
PMOS
NMOS
IN+
NMOS
V-
Figure 55. Rail-to-Rail Input Stage
7.3.6 Phase Reversal Protection
The OPAx990 family has internal phase-reversal protection. Many op amps exhibit a phase reversal when the
input is driven beyond its linear common-mode range. This condition is most often encountered in non-inverting
circuits when the input is driven beyond the specified common-mode voltage range, causing the output to
reverse into the opposite rail. The OPAx990 is a rail-to-rail input op amp; therefore, the common-mode range can
extend up to the rails. Input signals beyond the rails do not cause phase reversal; instead, the output limits into
the appropriate rail. This performance is shown in Figure 56. For more information on phase reversal, see Op
Amps With Complementary-Pair Input Stages application note.
Input
Output
Time (20µs/Div)
C016
Figure 56. No Phase Reversal
28
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
7.3.7 Electrical Overstress
Designers often ask questions about the capability of an operational amplifier to withstand electrical overstress
(EOS). These questions tend to focus on the device inputs, but may involve the supply voltage pins or even the
output pin. Each of these different pin functions have electrical stress limits determined by the voltage breakdown
characteristics of the particular semiconductor fabrication process and specific circuits connected to the pin.
Additionally, internal electrostatic discharge (ESD) protection is built into these circuits to protect them from
accidental ESD events both before and during product assembly.
Having a good understanding of this basic ESD circuitry and its relevance to an electrical overstress event is
helpful. Figure 57 shows an illustration of the ESD circuits contained in the OPAx990 (indicated by the dashed
line area). The ESD protection circuitry involves several current-steering diodes connected from the input and
output pins and routed back to the internal power-supply lines, where the diodes meet at an absorption device or
the power-supply ESD cell, internal to the operational amplifier. This protection circuitry is intended to remain
inactive during normal circuit operation.
TVS
RF
+VS
VDD
OPAx990
100 Ω
100 Ω
R1
RS
INœ
œ
IN+
+
Power-Supply
ESD Cell
RL
ID
+
VIN
œ
VSS
œVS
TVS
Figure 57. Equivalent Internal ESD Circuitry Relative to a Typical Circuit Application
An ESD event is very short in duration and very high voltage (for example; 1 kV, 100 ns), whereas an EOS event
is long duration and lower voltage (for example; 50 V, 100 ms). The ESD diodes are designed for out-of-circuit
ESD protection (that is, during assembly, test, and storage of the device before being soldered to the PCB).
During an ESD event, the ESD signal is passed through the ESD steering diodes to an absorption circuit (labeled
ESD power-supply circuit). The ESD absorption circuit clamps the supplies to a safe level.
Although this behavior is necessary for out-of-circuit protection, excessive current and damage is caused if
activated in-circuit. A transient voltage suppressors (TVS) can be used to prevent against damage caused by
turning on the ESD absorption circuit during an in-circuit ESD event. Using the appropriate current limiting
resistors and TVS diodes allows for the use of device ESD diodes to protect against EOS events.
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
29
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
7.3.8 Overload Recovery
Overload recovery is defined as the time required for the op amp output to recover from a saturated state to a
linear state. The output devices of the op amp enter a saturation region when the output voltage exceeds the
rated operating voltage, either due to the high input voltage or the high gain. After the device enters the
saturation region, the charge carriers in the output devices require time to return back to the linear state. After
the charge carriers return back to the linear state, the device begins to slew at the specified slew rate. Thus, the
propagation delay in case of an overload condition is the sum of the overload recovery time and the slew time.
The overload recovery time for the OPAx990 is approximately 600 ns.
7.3.9 Typical Specifications and Distributions
Designers often have questions about a typical specification of an amplifier in order to design a more robust
circuit. Due to natural variation in process technology and manufacturing procedures, every specification of an
amplifier will exhibit some amount of deviation from the ideal value, like an amplifier's input offset voltage. These
deviations often follow Gaussian ("bell curve"), or normal distributions, and circuit designers can leverage this
information to guardband their system, even when there is not a minimum or maximum specification in the
Electrical Characteristics table.
0.00312% 0.13185%
0.13185% 0.00312%
0.00002%
0.00002%
2.145% 13.59% 34.13% 34.13% 13.59% 2.145%
1
1 1 1 1 1 1 1 1
1
1
1
ꢀ-61 ꢀ-51 ꢀ-41 ꢀ-31 ꢀ-21 ꢀ-1
ꢀ+1 ꢀ+21 ꢀ+31 ꢀ+41 ꢀ+51 ꢀ+61
ꢀ
Figure 58. Ideal Gaussian Distribution
Figure 58 shows an example distribution, where µ, or mu, is the mean of the distribution, and where σ, or sigma,
is the standard deviation of a system. For a specification that exhibits this kind of distribution, approximately two-
thirds (68.26%) of all units can be expected to have a value within one standard deviation, or one sigma, of the
mean (from µ–σ to µ+σ).
Depending on the specification, values listed in the typical column of the Electrical Characteristics table are
represented in different ways. As a general rule of thumb, if a specification naturally has a nonzero mean (for
example, like gain bandwidth), then the typical value is equal to the mean (µ). However, if a specification
naturally has a mean near zero (like input offset voltage), then the typical value is equal to the mean plus one
standard deviation (µ + σ) in order to most accurately represent the typical value.
You can use this chart to calculate approximate probability of a specification in a unit; for example, for OPAx990,
the typical input voltage offset is 300 µV, so 68.2% of all OPAx990 devices are expected to have an offset from
–300 µV to +300 µV. At 4 σ (±1200 µV), 99.9937% of the distribution has an offset voltage less than ±1200 µV,
which means 0.0063% of the population is outside of these limits, which corresponds to about 1 in 15,873 units.
30
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Specifications with a value in the minimum or maximum column are assured by TI, and units outside these limits
will be removed from production material. For example, the OPAx990 family has a maximum offset voltage of 1.5
mV at 25°C, and even though this corresponds to 5 σ (≈1 in 1.7 million units), which is extremely unlikely, TI
assures that any unit with larger offset than 1.5 mV will be removed from production material.
For specifications with no value in the minimum or maximum column, consider selecting a sigma value of
sufficient guardband for your application, and design worst-case conditions using this value. For example, the 6σ
value corresponds to about 1 in 500 million units, which is an extremely unlikely chance, and could be an option
as a wide guardband to design a system around. In this case, the OPAx990 family does not have a maximum or
minimum for offset voltage drift, but based on Figure 2 and the typical value of 0.6 µV/°C in the Electrical
Characteristics table, it can be calculated that the 6-σ value for offset voltage drift is about 3.6 µV/°C. When
designing for worst-case system conditions, this value can be used to estimate the worst possible offset across
temperature without having an actual minimum or maximum value.
However, process variation and adjustments over time can shift typical means and standard deviations, and
unless there is a value in the minimum or maximum specification column, TI cannot assure the performance of a
device. This information should be used only to estimate the performance of a device.
7.3.10 Packages With an Exposed Thermal Pad
The OPAx990 family is available in packages such as the WSON-8 (DSG) and WQFN-16 (RTE) which feature
an exposed thermal pad. Inside the package, the die is attached to this thermal pad using an electrically
conductive compound. For this reason, when using a package with an exposed thermal pad, the thermal pad
must either be connected to V– or left floating. Attaching the thermal pad to a potential other than V– is not
allowed, and performance of the device is not assured when doing so.
7.3.11 Shutdown
The OPAx990S devices feature one or more shutdown pins (SHDN) that disable the op amp, placing it into a
low-power standby mode. In this mode, the op amp typically consumes about 20 µA. The SHDN pins are active
high, meaning that shutdown mode is enabled when the input to the SHDN pin is a valid logic high.
The SHDN pins are referenced to the negative supply rail of the op amp. The threshold of the shutdown feature
lies around 800 mV (typical) and does not change with respect to the supply voltage. Hysteresis has been
included in the switching threshold to ensure smooth switching characteristics. To ensure optimal shutdown
behavior, the SHDN pins should be driven with valid logic signals. A valid logic low is defined as a voltage
between V– and V– + 0.4 V. A valid logic high is defined as a voltage between V– + 1.2 V and V– + 20 V. The
shutdown pin circuitry includes a pull-down resistor, which will inherently pull the voltage of the pin to the
negative supply rail if not driven. Thus, to enable the amplifier, the SHDN pins should either be left floating or
driven to a valid logic low. To disable the amplifier, the SHDN pins must be driven to a valid logic high. The
maximum voltage allowed at the SHDN pins is V– + 20 V. Exceeding this voltage level will damage the device.
The SHDN pins are high-impedance CMOS inputs. Channels of single and dual op amp packages are
independently controlled, and channels of quad op amp packages are controlled in pairs. For battery-operated
applications, this feature may be used to greatly reduce the average current and extend battery life. The typical
enable time out of shutdown is 30 µs; disable time is 3 µs. When disabled, the output assumes a high-
impedance state. This architecture allows the OPAx990S family to operate as a gated amplifier, multiplexer, or
programmable-gain amplifier. Shutdown time (tOFF) depends on loading conditions and increases as load
resistance increases. To ensure shutdown (disable) within a specific shutdown time, the specified 10-kΩ load to
midsupply (VS / 2) is required. If using the OPAx990S without a load, the resulting turnoff time significantly
increases.
7.4 Device Functional Modes
The OPAx990 has a single functional mode and is operational when the power-supply voltage is greater than or
equal to 2.7 V (±1.35 V). The maximum power supply voltage for the OPAx990 is 40 V (±20 V).
The OPAx990S devices feature a shutdown pin, which can be used to place the op amp into a low-power mode.
See Shutdown section for more information.
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
31
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
8 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
8.1 Application Information
The OPAx990 family offers excellent DC precision and AC performance. These devices operate up to 40-V
supply rails and offer true rail-to-rail input/output, low offset voltage and offset voltage drift, as well as 1.1-MHz
bandwidth and high output drive. These features make the OPAx990 a robust, high-performance operational
amplifier for high-voltage industrial applications.
8.2 Typical Applications
8.2.1 High Voltage Buffered Multiplexer
The OPAx990S shutdown devices can be configured to create a high voltage, buffered multiplexer. Outputs can
be connected together on a common bus and the shutdown pins can be used to select the desired channel to
pass through. Since the amplifier circuitry has been designed such that disable transitions occur significantly
faster than enable transitions, the amplifier naturally exhibits a "break before make" switch topology. Amplifier
outputs enter a high impedance state when placed in shutdown, so there is no risk of bus contention when
connecting multiple channel outputs together. Additionally, because outputs are isolated from inputs, there is no
concern about the impedance at the input of each channel interacting undesirably with the impedance at the
output, like an amplifier gain stage or ADC driver circuit. Also, because this topology uses amplifiers instead of
MOSFET switches, other common issues with multiplexers such as charge injection or signal error due to RON
effects are eliminated.
Figure 59 shows an example topology for a basic 2:1 multiplexer. When SEL is low, channel 1 is selected and
active; when SEL is high, channel 2 is selected and active. For more information on how to use the OPAx990S
shutdown function, see the shutdown section in the Electrical Characteristics table.
œ
Channel 1
Channel 1
Input
+
SEL
Output
Channel 2
Input
+
Channel 2
œ
Figure 59. High Voltage Buffered Multiplexer
8.2.2 Slew Rate Limit for Input Protection
In control systems for valves or motors, abrupt changes in voltages or currents can cause mechanical damages.
By controlling the slew rate of the command voltages into the drive circuits, the load voltages ramps up and down
at a safe rate. For symmetrical slew-rate applications (positive slew rate equals negative slew rate), one
additional op amp provides slew-rate control for a given analog gain stage. The unique input protection and high
output current and slew rate of the OPAx990 make the device an optimal amplifier to achieve slew rate control
for both dual- and single-supply systems. Figure 60 shows the OPA990 in a slew-rate limit design.
32
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Typical Applications (continued)
Op Amp Gain Stage
Slew Rate Limiter
C1
470 nF
R1
1.69 kΩ
VEE
VEE
R2
-
1.6 MΩ
OPAx990
-
VIN
V+
+
OPAx990
VOUT
V+
+
VCC
RL
VCC
10 kΩ
Figure 60. Slew Rate Limiter Uses One Op Amp
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
33
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
9 Power Supply Recommendations
The OPAx990 is specified for operation from 2.7 V to 40 V (±1.35 V to ±20 V); many specifications apply from
–40°C to 125°C or with specific supply voltages and test conditions. Parameters that can exhibit significant
variance with regard to operating voltage or temperature are presented in the Typical Characteristics section.
CAUTION
Supply voltages larger than 40 V can permanently damage the device; see the
Absolute Maximum Ratings.
Place 0.1-µF bypass capacitors close to the power-supply pins to reduce errors coupling in from noisy or high-
impedance power supplies. For more detailed information on bypass capacitor placement, refer to the Layout
section.
10 Layout
10.1 Layout Guidelines
For best operational performance of the device, use good PCB layout practices, including:
•
Noise can propagate into analog circuitry through the power pins of the circuit as a whole and op amp itself.
Bypass capacitors are used to reduce the coupled noise by providing low-impedance power sources local to
the analog circuitry.
–
Connect low-ESR, 0.1-µF ceramic bypass capacitors between each supply pin and ground, placed as
close to the device as possible. A single bypass capacitor from V+ to ground is applicable for single-
supply applications.
•
•
Separate grounding for analog and digital portions of circuitry is one of the simplest and most-effective
methods of noise suppression. One or more layers on multilayer PCBs are usually devoted to ground planes.
A ground plane helps distribute heat and reduces EMI noise pickup. Make sure to physically separate digital
and analog grounds paying attention to the flow of the ground current.
In order to reduce parasitic coupling, run the input traces as far away from the supply or output traces as
possible. If these traces cannot be kept separate, crossing the sensitive trace perpendicular is much better as
opposed to in parallel with the noisy trace.
•
•
•
Place the external components as close to the device as possible. As illustrated in Figure 62, keeping RF and
RG close to the inverting input minimizes parasitic capacitance.
Keep the length of input traces as short as possible. Always remember that the input traces are the most
sensitive part of the circuit.
Consider a driven, low-impedance guard ring around the critical traces. A guard ring can significantly reduce
leakage currents from nearby traces that are at different potentials.
•
•
Cleaning the PCB following board assembly is recommended for best performance.
Any precision integrated circuit may experience performance shifts due to moisture ingress into the plastic
package. Following any aqueous PCB cleaning process, baking the PCB assembly is recommended to
remove moisture introduced into the device packaging during the cleaning process. A low temperature, post
cleaning bake at 85°C for 30 minutes is sufficient for most circumstances.
10.2 Layout Example
VIN
+
VOUT
RG
RF
Figure 61. Schematic Representation
34
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
Layout Example (continued)
Place components close
to device and to each
other to reduce parasitic
errors
Run the input traces
as far away from
the supply lines
as possible
VS+
RF
NC
NC
Use a low-ESR,
ceramic bypass
capacitor
RG
GND
œIN
+IN
Vœ
V+
OUTPUT
NC
VIN
GND
GND
VSœ
VOUT
Ground (GND) plane on another layer
Use low-ESR,
ceramic bypass
capacitor
Figure 62. Operational Amplifier Board Layout for Noninverting Configuration
GND
GND
OUT
V-
GND
Figure 63. Example Layout for SC70 (DCK) Package
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
35
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
Layout Example (continued)
GND
GND
GND
V+
INPUT A
OUTPUT B
V-
GND
GND
GND
Figure 64. Example Layout for VSSOP-8 (DGK) Package
GND
GND
GND
-
+
OUT B
+
-
+IN A
GND
GND
GND
Figure 65. Example Layout for WSON-8 (DSG) Package
36
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
www.ti.com
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
11 Device and Documentation Support
11.1 Device Support
11.1.1 Development Support
11.1.1.1 TINA-TI™ (Free Software Download)
TINA™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-TI is a
free, fully-functional version of the TINA software, preloaded with a library of macro models in addition to a range
of both passive and active models. TINA-TI provides all the conventional dc, transient, and frequency domain
analysis of SPICE, as well as additional design capabilities.
Available as a free download from the Analog eLab Design Center, TINA-TI offers extensive post-processing
capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select
input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.
NOTE
These files require that either the TINA software (from DesignSoft™) or TINA-TI software
be installed. Download the free TINA-TI software from the TINA-TI folder.
11.2 Documentation Support
11.2.1 Related Documentation
Texas Instruments, Op Amps With Complementary-Pair Input Stages application note
11.3 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to order now.
Table 3. Related Links
TECHNICAL
DOCUMENTS
TOOLS &
SOFTWARE
SUPPORT &
COMMUNITY
PARTS
PRODUCT FOLDER
ORDER NOW
OPA990
OPA2990
OPA4990
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Copyright © 2019–2020, Texas Instruments Incorporated
Submit Documentation Feedback
37
Product Folder Links: OPA990 OPA2990 OPA4990
OPA990, OPA2990, OPA4990
SBOS933F –FEBRUARY 2019–REVISED MAY 2020
www.ti.com
11.4 Receiving Notification of Documentation Updates
To receive notification of documentation updates, navigate to the device product folder on ti.com. In the upper
right corner, click on Alert me to register and receive a weekly digest of any product information that has
changed. For change details, review the revision history included in any revised document.
11.5 Support Resources
TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight
from the experts. Search existing answers or ask your own question to get the quick design help you need.
Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do
not necessarily reflect TI's views; see TI's Terms of Use.
11.6 Trademarks
E2E is a trademark of Texas Instruments.
TINA-TI is a trademark of Texas Instruments, Inc and DesignSoft, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
TINA, DesignSoft are trademarks of DesignSoft, Inc.
All other trademarks are the property of their respective owners.
11.7 Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
11.8 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
12 Mechanical, Packaging, and Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
38
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
Product Folder Links: OPA990 OPA2990 OPA4990
PACKAGE OPTION ADDENDUM
www.ti.com
7-Oct-2020
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead finish/
Ball material
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
DDF
D
Qty
(1)
(2)
(3)
(4/5)
(6)
OPA2990IDDFR
OPA2990IDR
ACTIVE SOT-23-THIN
8
8
3000
2500
3000
2000
2500
3000
3000
2500
2000
3000
3000
3000
3000
Green (RoHS
& no Sb/Br)
NIPDAU
Level-1-260C-UNLIM
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-1-260C-UNLIM
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-2-260C-1 YEAR
Level-1-260C-UNLIM
Level-2-260C-1 YEAR
Level-1-260C-UNLIM
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
O90F
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
Green (RoHS
& no Sb/Br)
NIPDAU
NIPDAU
NIPDAU
NIPDAUAG
NIPDAUAG
NIPDAU
NIPDAU
SN
OP2990
O29G
OPA2990IDSGR
OPA2990IPWR
OPA2990SIDGSR
OPA2990SIRUGR
OPA2990TIDDFR
OPA4990IDR
WSON
TSSOP
VSSOP
X2QFN
DSG
PW
8
Green (RoHS
& no Sb/Br)
8
Green (RoHS
& no Sb/Br)
O2990P
OP29
DGS
RUG
DDF
D
10
10
8
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
H9F
ACTIVE SOT-23-THIN
Green (RoHS
& no Sb/Br)
O90F
ACTIVE
ACTIVE
SOIC
TSSOP
QFN
14
14
14
5
Green (RoHS
& no Sb/Br)
OPA4990D
OPA49PW
FMF
OPA4990IPWR
OPA4990IRUCR
OPA990IDBVR
OPA990IDCKR
OPA990SIDBVR
PW
Green (RoHS
& no Sb/Br)
PREVIEW
ACTIVE
RUC
DBV
DCK
DBV
Green (RoHS
& no Sb/Br)
NIPDAU
NIPDAU
SN
SOT-23
SC70
Green (RoHS
& no Sb/Br)
O90V
PREVIEW
ACTIVE
5
Green (RoHS
& no Sb/Br)
1FL
SOT-23
6
Green (RoHS
& no Sb/Br)
NIPDAU
O90S
POPA4990IPWR
POPA4990IRUCR
POPA990IDCKR
ACTIVE
ACTIVE
ACTIVE
TSSOP
QFN
PW
RUC
DCK
14
14
5
2000
3000
3000
TBD
TBD
TBD
Call TI
Call TI
Call TI
Call TI
Call TI
Call TI
-40 to 125
-40 to 125
-40 to 125
SC70
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
7-Oct-2020
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two
lines if the finish value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
7-Oct-2020
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
OPA2990IDDFR
SOT-
DDF
8
3000
180.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
23-THIN
OPA2990IDR
OPA2990IDSGR
OPA2990IPWR
SOIC
D
8
8
2500
3000
2000
2500
3000
3000
330.0
180.0
330.0
330.0
178.0
180.0
12.4
8.4
6.4
2.3
7.0
5.3
1.75
3.2
5.2
2.3
3.6
3.4
2.25
3.2
2.1
1.15
1.6
8.0
4.0
8.0
8.0
4.0
4.0
12.0
8.0
Q1
Q2
Q1
Q1
Q1
Q2
WSON
TSSOP
VSSOP
X2QFN
DSG
PW
8
12.4
12.4
8.4
12.0
12.0
8.0
OPA2990SIDGSR
OPA2990SIRUGR
OPA2990TIDDFR
DGS
RUG
DDF
10
10
8
1.4
0.56
1.4
SOT-
8.4
8.0
23-THIN
OPA4990IDR
OPA4990IPWR
OPA990IDBVR
OPA990SIDBVR
SOIC
D
14
14
5
2500
2000
3000
3000
330.0
330.0
180.0
180.0
16.4
12.4
8.4
6.5
6.9
3.2
3.2
9.0
5.6
3.2
3.2
2.1
1.6
1.4
1.4
8.0
8.0
4.0
4.0
16.0
12.0
8.0
Q1
Q1
Q3
Q3
TSSOP
SOT-23
SOT-23
PW
DBV
DBV
6
8.4
8.0
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
7-Oct-2020
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
OPA2990IDDFR
OPA2990IDR
SOT-23-THIN
SOIC
DDF
D
8
8
3000
2500
3000
2000
2500
3000
3000
2500
2000
3000
3000
210.0
367.0
210.0
367.0
366.0
205.0
210.0
367.0
366.0
210.0
210.0
185.0
367.0
185.0
367.0
364.0
200.0
185.0
367.0
364.0
185.0
185.0
35.0
35.0
35.0
35.0
50.0
33.0
35.0
38.0
50.0
35.0
35.0
OPA2990IDSGR
OPA2990IPWR
OPA2990SIDGSR
OPA2990SIRUGR
OPA2990TIDDFR
OPA4990IDR
WSON
DSG
PW
8
TSSOP
VSSOP
X2QFN
8
DGS
RUG
DDF
D
10
10
8
SOT-23-THIN
SOIC
14
14
5
OPA4990IPWR
OPA990IDBVR
OPA990SIDBVR
TSSOP
SOT-23
SOT-23
PW
DBV
DBV
6
Pack Materials-Page 2
PACKAGE OUTLINE
DDF0008A
SOT-23 - 1.1 mm max height
S
C
A
L
E
4
.
0
0
0
PLASTIC SMALL OUTLINE
C
2.95
2.65
SEATING PLANE
TYP
PIN 1 ID
AREA
0.1 C
A
6X 0.65
8
1
2.95
2.85
NOTE 3
2X
1.95
4
5
0.4
0.2
8X
0.1
C A
B
1.65
1.55
B
1.1 MAX
0.20
0.08
TYP
SEE DETAIL A
0.25
GAGE PLANE
0.1
0.0
0 - 8
0.6
0.3
DETAIL A
TYPICAL
4222047/B 11/2015
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
www.ti.com
EXAMPLE BOARD LAYOUT
DDF0008A
SOT-23 - 1.1 mm max height
PLASTIC SMALL OUTLINE
8X (1.05)
SYMM
1
8
8X (0.45)
SYMM
6X (0.65)
5
4
(R0.05)
TYP
(2.6)
LAND PATTERN EXAMPLE
SCALE:15X
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
METAL
SOLDER MASK
DEFINED
NON SOLDER MASK
DEFINED
SOLDER MASK DETAILS
4222047/B 11/2015
NOTES: (continued)
4. Publication IPC-7351 may have alternate designs.
5. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
DDF0008A
SOT-23 - 1.1 mm max height
PLASTIC SMALL OUTLINE
8X (1.05)
SYMM
(R0.05) TYP
8
1
8X (0.45)
SYMM
6X (0.65)
5
4
(2.6)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:15X
4222047/B 11/2015
NOTES: (continued)
6. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
7. Board assembly site may have different recommendations for stencil design.
www.ti.com
PACKAGE OUTLINE
DBV0006A
SOT-23 - 1.45 mm max height
S
C
A
L
E
4
.
0
0
0
SMALL OUTLINE TRANSISTOR
C
3.0
2.6
0.1 C
1.75
1.45
B
1.45 MAX
A
PIN 1
INDEX AREA
1
2
6
5
2X 0.95
1.9
3.05
2.75
4
3
0.50
6X
0.25
C A B
0.15
0.00
0.2
(1.1)
TYP
0.25
GAGE PLANE
0.22
0.08
TYP
8
TYP
0
0.6
0.3
TYP
SEATING PLANE
4214840/B 03/2018
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Body dimensions do not include mold flash or protrusion. Mold flash and protrusion shall not exceed 0.15 per side.
4. Leads 1,2,3 may be wider than leads 4,5,6 for package orientation.
5. Refernce JEDEC MO-178.
www.ti.com
EXAMPLE BOARD LAYOUT
DBV0006A
SOT-23 - 1.45 mm max height
SMALL OUTLINE TRANSISTOR
PKG
6X (1.1)
1
6X (0.6)
6
SYMM
5
2
3
2X (0.95)
4
(R0.05) TYP
(2.6)
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE:15X
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
METAL
EXPOSED METAL
EXPOSED METAL
0.07 MIN
ARROUND
0.07 MAX
ARROUND
NON SOLDER MASK
DEFINED
SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK DETAILS
4214840/B 03/2018
NOTES: (continued)
6. Publication IPC-7351 may have alternate designs.
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
DBV0006A
SOT-23 - 1.45 mm max height
SMALL OUTLINE TRANSISTOR
PKG
6X (1.1)
1
6X (0.6)
6
SYMM
5
2
3
2X(0.95)
4
(R0.05) TYP
(2.6)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:15X
4214840/B 03/2018
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
PACKAGE OUTLINE
DBV0005A
SOT-23 - 1.45 mm max height
S
C
A
L
E
4
.
0
0
0
SMALL OUTLINE TRANSISTOR
C
3.0
2.6
0.1 C
1.75
1.45
1.45
0.90
B
A
PIN 1
INDEX AREA
1
2
5
2X 0.95
1.9
3.05
2.75
1.9
4
3
0.5
5X
0.3
0.15
0.00
(1.1)
TYP
0.2
C A B
0.25
GAGE PLANE
0.22
0.08
TYP
8
0
TYP
0.6
0.3
TYP
SEATING PLANE
4214839/E 09/2019
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Refernce JEDEC MO-178.
4. Body dimensions do not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
www.ti.com
EXAMPLE BOARD LAYOUT
DBV0005A
SOT-23 - 1.45 mm max height
SMALL OUTLINE TRANSISTOR
PKG
5X (1.1)
1
5
5X (0.6)
SYMM
(1.9)
2
3
2X (0.95)
4
(R0.05) TYP
(2.6)
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE:15X
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
METAL
EXPOSED METAL
EXPOSED METAL
0.07 MIN
ARROUND
0.07 MAX
ARROUND
NON SOLDER MASK
DEFINED
SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK DETAILS
4214839/E 09/2019
NOTES: (continued)
5. Publication IPC-7351 may have alternate designs.
6. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
DBV0005A
SOT-23 - 1.45 mm max height
SMALL OUTLINE TRANSISTOR
PKG
5X (1.1)
1
5
5X (0.6)
SYMM
(1.9)
2
3
2X(0.95)
4
(R0.05) TYP
(2.6)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:15X
4214839/E 09/2019
NOTES: (continued)
7. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
8. Board assembly site may have different recommendations for stencil design.
www.ti.com
PACKAGE OUTLINE
DGS0010A
VSSOP - 1.1 mm max height
S
C
A
L
E
3
.
2
0
0
SMALL OUTLINE PACKAGE
C
SEATING PLANE
0.1 C
5.05
4.75
TYP
PIN 1 ID
AREA
A
8X 0.5
10
1
3.1
2.9
NOTE 3
2X
2
5
6
0.27
0.17
10X
3.1
2.9
1.1 MAX
0.1
C A
B
B
NOTE 4
0.23
0.13
TYP
SEE DETAIL A
0.25
GAGE PLANE
0.15
0.05
0.7
0.4
0 - 8
DETAIL A
TYPICAL
4221984/A 05/2015
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side.
5. Reference JEDEC registration MO-187, variation BA.
www.ti.com
EXAMPLE BOARD LAYOUT
DGS0010A
VSSOP - 1.1 mm max height
SMALL OUTLINE PACKAGE
10X (1.45)
(R0.05)
TYP
SYMM
10X (0.3)
1
5
10
SYMM
6
8X (0.5)
(4.4)
LAND PATTERN EXAMPLE
SCALE:10X
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
METAL
0.05 MAX
ALL AROUND
0.05 MIN
ALL AROUND
SOLDER MASK
DEFINED
NON SOLDER MASK
DEFINED
SOLDER MASK DETAILS
NOT TO SCALE
4221984/A 05/2015
NOTES: (continued)
6. Publication IPC-7351 may have alternate designs.
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
DGS0010A
VSSOP - 1.1 mm max height
SMALL OUTLINE PACKAGE
10X (1.45)
SYMM
(R0.05) TYP
10X (0.3)
8X (0.5)
1
5
10
SYMM
6
(4.4)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:10X
4221984/A 05/2015
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
PACKAGE OUTLINE
D0008A
SOIC - 1.75 mm max height
SCALE 2.800
SMALL OUTLINE INTEGRATED CIRCUIT
C
SEATING PLANE
.228-.244 TYP
[5.80-6.19]
.004 [0.1] C
A
PIN 1 ID AREA
6X .050
[1.27]
8
1
2X
.189-.197
[4.81-5.00]
NOTE 3
.150
[3.81]
4X (0 -15 )
4
5
8X .012-.020
[0.31-0.51]
B
.150-.157
[3.81-3.98]
NOTE 4
.069 MAX
[1.75]
.010 [0.25]
C A B
.005-.010 TYP
[0.13-0.25]
4X (0 -15 )
SEE DETAIL A
.010
[0.25]
.004-.010
[0.11-0.25]
0 - 8
.016-.050
[0.41-1.27]
DETAIL A
TYPICAL
(.041)
[1.04]
4214825/C 02/2019
NOTES:
1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches.
Dimensioning and tolerancing per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed .006 [0.15] per side.
4. This dimension does not include interlead flash.
5. Reference JEDEC registration MS-012, variation AA.
www.ti.com
EXAMPLE BOARD LAYOUT
D0008A
SOIC - 1.75 mm max height
SMALL OUTLINE INTEGRATED CIRCUIT
8X (.061 )
[1.55]
SYMM
SEE
DETAILS
1
8
8X (.024)
[0.6]
SYMM
(R.002 ) TYP
[0.05]
5
4
6X (.050 )
[1.27]
(.213)
[5.4]
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE:8X
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
METAL
EXPOSED
METAL
EXPOSED
METAL
.0028 MAX
[0.07]
.0028 MIN
[0.07]
ALL AROUND
ALL AROUND
SOLDER MASK
DEFINED
NON SOLDER MASK
DEFINED
SOLDER MASK DETAILS
4214825/C 02/2019
NOTES: (continued)
6. Publication IPC-7351 may have alternate designs.
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
D0008A
SOIC - 1.75 mm max height
SMALL OUTLINE INTEGRATED CIRCUIT
8X (.061 )
[1.55]
SYMM
1
8
8X (.024)
[0.6]
SYMM
(R.002 ) TYP
[0.05]
5
4
6X (.050 )
[1.27]
(.213)
[5.4]
SOLDER PASTE EXAMPLE
BASED ON .005 INCH [0.125 MM] THICK STENCIL
SCALE:8X
4214825/C 02/2019
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
GENERIC PACKAGE VIEW
DSG 8
2 x 2, 0.5 mm pitch
WSON - 0.8 mm max height
PLASTIC SMALL OUTLINE - NO LEAD
This image is a representation of the package family, actual package may vary.
Refer to the product data sheet for package details.
4224783/A
www.ti.com
PACKAGE OUTLINE
DSG0008A
WSON - 0.8 mm max height
SCALE 5.500
PLASTIC SMALL OUTLINE - NO LEAD
2.1
1.9
B
A
PIN 1 INDEX AREA
2.1
1.9
0.32
0.18
0.4
0.2
ALTERNATIVE TERMINAL SHAPE
TYPICAL
C
0.8 MAX
SEATING PLANE
0.08 C
0.05
0.00
EXPOSED
THERMAL PAD
(0.2) TYP
0.9 0.1
5
4
6X 0.5
2X
1.5
9
1.6 0.1
8
1
0.32
0.18
8X
0.4
0.2
PIN 1 ID
8X
0.1
C A B
C
0.05
4218900/D 04/2020
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. The package thermal pad must be soldered to the printed circuit board for thermal and mechanical performance.
www.ti.com
EXAMPLE BOARD LAYOUT
DSG0008A
WSON - 0.8 mm max height
PLASTIC SMALL OUTLINE - NO LEAD
(0.9)
(
0.2) VIA
8X (0.5)
TYP
1
8
8X (0.25)
(0.55)
SYMM
9
(1.6)
6X (0.5)
5
4
SYMM
(1.9)
(R0.05) TYP
LAND PATTERN EXAMPLE
SCALE:20X
0.07 MIN
ALL AROUND
0.07 MAX
ALL AROUND
SOLDER MASK
OPENING
METAL
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
NON SOLDER MASK
DEFINED
SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK DETAILS
4218900/D 04/2020
NOTES: (continued)
4. This package is designed to be soldered to a thermal pad on the board. For more information, see Texas Instruments literature
number SLUA271 (www.ti.com/lit/slua271).
5. Vias are optional depending on application, refer to device data sheet. If any vias are implemented, refer to their locations shown
on this view. It is recommended that vias under paste be filled, plugged or tented.
www.ti.com
EXAMPLE STENCIL DESIGN
DSG0008A
WSON - 0.8 mm max height
PLASTIC SMALL OUTLINE - NO LEAD
8X (0.5)
METAL
8
SYMM
1
8X (0.25)
(0.45)
SYMM
9
(0.7)
6X (0.5)
5
4
(R0.05) TYP
(0.9)
(1.9)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
EXPOSED PAD 9:
87% PRINTED SOLDER COVERAGE BY AREA UNDER PACKAGE
SCALE:25X
4218900/D 04/2020
NOTES: (continued)
6. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
www.ti.com
PACKAGE OUTLINE
PW0008A
TSSOP - 1.2 mm max height
S
C
A
L
E
2
.
8
0
0
SMALL OUTLINE PACKAGE
C
6.6
6.2
SEATING PLANE
TYP
PIN 1 ID
AREA
A
0.1 C
6X 0.65
8
5
1
3.1
2.9
NOTE 3
2X
1.95
4
0.30
0.19
8X
4.5
4.3
1.2 MAX
B
0.1
C A
B
NOTE 4
(0.15) TYP
SEE DETAIL A
0.25
GAGE PLANE
0.15
0.05
0.75
0.50
0 - 8
DETAIL A
TYPICAL
4221848/A 02/2015
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed 0.15 mm per side.
4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side.
5. Reference JEDEC registration MO-153, variation AA.
www.ti.com
EXAMPLE BOARD LAYOUT
PW0008A
TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
8X (1.5)
SYMM
8X (0.45)
(R0.05)
1
4
TYP
8
SYMM
6X (0.65)
5
(5.8)
LAND PATTERN EXAMPLE
SCALE:10X
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
METAL
0.05 MAX
ALL AROUND
0.05 MIN
ALL AROUND
SOLDER MASK
DEFINED
NON SOLDER MASK
DEFINED
SOLDER MASK DETAILS
NOT TO SCALE
4221848/A 02/2015
NOTES: (continued)
6. Publication IPC-7351 may have alternate designs.
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
PW0008A
TSSOP - 1.2 mm max height
SMALL OUTLINE PACKAGE
8X (1.5)
SYMM
(R0.05) TYP
8X (0.45)
1
4
8
SYMM
6X (0.65)
5
(5.8)
SOLDER PASTE EXAMPLE
BASED ON 0.125 mm THICK STENCIL
SCALE:10X
4221848/A 02/2015
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
www.ti.com
PACKAGE OUTLINE
X2QFN - 0.4 mm max height
PLASTIC QUAD FLAT PACK- NO LEAD
RUC0014A
A
2.1
1.9
B
2.1
1.9
PIN 1 INDEX AREA
0.4 MAX
C
SEATING PLANE
0.08 C
0.05
0.00
(0.15) TYP
2X 0.4
6
7
8X 0.4
5
8
SYMM
1.6
12
1
0.25
0.15
14
13
14X
0.5
PIN 1 ID
SYMM
(45oX0.1)
0.1
C A B
C
14X
0.3
0.05
4220584/A 05/2019
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
www.ti.com
EXAMPLE BOARD LAYOUT
X2QFN - 0.4 mm max height
PLASTIC QUAD FLAT PACK- NO LEAD
RUC0014A
SYMM
14X (0.6)
14X (0.2)
8X (0.4)
SYMM
(1.6) (1.8)
(R0.05)
2X (0.4)
(1.8)
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE: 23X
0.05 MAX
ALL AROUND
0.05 MIN
ALL AROUND
SOLDER MASK
OPENING
METAL
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
EXPOSED METAL
EXPOSED METAL
NON-SOLDER MASK
DEFINED
SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK DETAILS
4220584/A 05/2019
NOTES: (continued)
3. For more information, see Texas Instruments literature number SLUA271 (www.ti.com/lit/slua271).
www.ti.com
EXAMPLE STENCIL DESIGN
X2QFN - 0.4 mm max height
RUC0014A
PLASTIC QUAD FLAT PACK- NO LEAD
SYMM
14X (0.6)
14X (0.2)
8X (0.4)
SYMM
(1.6) (1.8)
(R0.05)
2X (0.4)
(1.8)
SOLDER PASTE EXAMPLE
BASED ON 0.100mm THICK STENCIL
SCALE: 23X
4220584/A 05/2019
NOTES: (continued)
4. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
www.ti.com
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third
party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,
damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on
ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable
warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2020, Texas Instruments Incorporated
相关型号:
OPA991-Q1_V01
OPAx991-Q1 Automotive, 40-V Rail-to-Rail Input/Output, Low Offset Voltage, Low Noise Op Amp
TI
OPA991-Q1_V02
OPAx991-Q1 Automotive, 40-V Rail-to-Rail Input/Output, Low Offset Voltage, Low Noise Op Amp
TI
OPA991QDBVRQ1
OPAx991-Q1 Automotive, 40-V Rail-to-Rail Input/Output, Low Offset Voltage, Low Noise Op Amp
TI
©2020 ICPDF网 联系我们和版权申明