LM4040DIM3X-8.2/NOPB [TI]
1-OUTPUT TWO TERM VOLTAGE REFERENCE, 8.192V, PDSO3, PLASTIC, TO-236AB, SOT-23, 3 PIN;型号: | LM4040DIM3X-8.2/NOPB |
厂家: | TEXAS INSTRUMENTS |
描述: | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 8.192V, PDSO3, PLASTIC, TO-236AB, SOT-23, 3 PIN 光电二极管 输出元件 |
文件: | 总71页 (文件大小:1808K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
LM4040-N/-Q1 Precision Micropower Shunt Voltage Reference
1 Features
3 Description
Ideal for space-critical applications, the LM4040-N
1
•
•
•
•
•
SOT-23 AEC Q-100 Grades 1 and 3 Available
Small Packages: SOT-23, TO-92, and SC70
No Output Capacitor Required
precision voltage reference is available in the sub-
miniature SC70 and SOT-23 surface-mount package.
The advanced design of the LM4040-N eliminates the
need for an external stabilizing capacitor while
ensuring stability with any capacitive load, thus
making the LM4040-N easy to use. Further reducing
design effort is the availability of several fixed reverse
breakdown voltages: 2.048 V, 2.5 V, 3 V, 4.096 V, 5
V, 8.192 V, and 10 V. The minimum operating current
increases from 60 μA for the 2.5-V LM4040-N to 100
μA for the 10-V LM4040-N. All versions have a
maximum operating current of 15 mA.
Tolerates Capacitive Loads
Fixed Reverse Breakdown Voltages of 2.048 V,
2.5 V, 3 V, 4.096 V, 5 V, 8.192 V, and 10 V
•
Key Specifications (2.5-V LM4040-N)
–
–
–
Output Voltage Tolerance (A Grade, 25°C):
±0.1% (Maximum)
Low Output Noise (10 Hz to 10 kHz): 35 μVrms
(Typical)
The LM4040-N uses a fuse and Zener-zap reverse
breakdown voltage trim during wafer sort to ensure
that the prime parts have an accuracy of better than
±0.1% (A grade) at 25°C. Bandgap reference
temperature drift curvature correction and low
Wide Operating Current Range: 60 μA to 15
mA
–
–
Industrial Temperature Range: −40°C to +85°C
Extended Temperature Range: −40°C to
dynamic
impedance
ensure
stable
reverse
+125°C
breakdown voltage accuracy over a wide range of
operating temperatures and currents.
–
Low Temperature Coefficient: 100 ppm/°C
(Maximum)
Also available is the LM4041-N with two reverse
breakdown voltage versions: adjustable and 1.2 V.
See the LM4041-N data sheet (SNOS641).
2 Applications
•
•
•
•
•
•
•
•
Portable, Battery-Powered Equipment
Data Acquisition Systems
Instrumentation
Device Information(1)
PART NUMBER
LM4040-N
PACKAGE
BODY SIZE (NOM)
4.30 mm × 4.30 mm
2.00 mm × 1.25 mm
2.92 mm × 1.30 mm
2.92 mm × 1.30 mm
TO-92 (3)
Process Controls
SC70 (5)
Energy Management
Product Testing
SOT-23 (3)
SOT-23 (3)
LM4040-N-Q1
Automotives
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Precision Audio Components
Shunt Reference Application Schematic
VDD
RS
VOUT
Cathode
Anode
LM4040
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Table of Contents
6.17 Electrical Characteristics: 5-V LM4040-N VR
1
2
3
4
5
6
Features.................................................................. 1
Applications ........................................................... 1
Description ............................................................. 1
Revision History..................................................... 3
Pin Configuration and Functions......................... 4
Specifications......................................................... 5
6.1 Absolute Maximum Ratings ...................................... 5
6.2 ESD Ratings.............................................................. 5
6.3 Recommended Operating Conditions....................... 6
6.4 Thermal Information.................................................. 6
Tolerance Grades 'C' And 'D'; Temperature Grade
'I'............................................................................... 24
6.18 Electrical Characteristics: 5-V LM4040-N VR
Tolerance Grades 'C' And 'D'; Temperature Grade
'E' ............................................................................. 26
6.19 Electrical Characteristics: 8.2-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'............................................................................... 27
6.20 Electrical Characteristics: 8.2-V Lm4040-N VR
Tolerance Grades 'C' And 'D'; Temperature Grade
'I'............................................................................... 28
6.21 Electrical Characteristics: 10-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'............................................................................... 29
6.5 Electrical Characteristics: 2-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade 'I' 7
6.6 Electrical Characteristics: 2-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I'...................................................................... 8
6.22 Electrical Characteristics: 10-V LM4040-N VR
Tolerance Grades 'C' And 'D'; Temperature Grade
'I'............................................................................... 30
6.7 Electrical Characteristics: 2-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' .................................................................. 10
6.23 Typical Characteristics.......................................... 31
Parameter Measurement Information ................ 32
Detailed Description ............................................ 33
8.1 Overview ................................................................. 33
8.2 Functional Block Diagram ....................................... 33
8.3 Feature Description................................................. 33
8.4 Device Functional Modes........................................ 33
Application and Implementation ........................ 34
9.1 Application Information............................................ 34
9.2 Typical Applications ................................................ 34
7
8
6.8 Electrical Characteristics: 2.5-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade 'I'
(AEC Grade 3) ......................................................... 11
6.9 Electrical Characteristics: 2.5-V LM4040-N VR
Tolerance Grades 'C', 'D', and 'E'; Temperature Grade
'I' (AEC Grade 3)...................................................... 13
6.10 Electrical Characteristics: 2.5-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' (AEC Grade 1) ......................................... 15
9
6.11 Electrical Characteristics: 3-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'............................................................................... 17
10 Power Supply Recommendations ..................... 41
11 Layout................................................................... 41
11.1 Layout Guidelines ................................................. 41
11.2 Layout Example .................................................... 41
12 Device and Documentation Support ................. 42
12.1 Documentation Support ........................................ 42
12.2 Related Links ........................................................ 42
12.3 Community Resources.......................................... 42
12.4 Trademarks........................................................... 42
12.5 Electrostatic Discharge Caution............................ 42
12.6 Glossary................................................................ 42
6.12 Electrical Characteristics: 3-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I'.................................................................... 18
6.13 Electrical Characteristics: 3-V LM4040-N VR
Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' .................................................................. 20
6.14 Electrical Characteristics: 4.1-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'............................................................................... 21
6.15 Electrical Characteristics: 4.1-V LM4040-N VR
Tolerance Grades 'C' and 'D'; Temperature Grade
'I'............................................................................... 22
13 Mechanical, Packaging, And Orderable
Information ........................................................... 42
13.1 SOT-23 and SC70 Package Marking Information 42
6.16 Electrical Characteristics: 5-V LM4040-N VR
Tolerance Grades 'A' And 'B'; Temperature Grade
'I'............................................................................... 23
2
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
4 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision J (August 2015) to Revision K
Page
•
Updated pinout diagrams ...................................................................................................................................................... 4
Changes from Revision I (April 2015) to Revision J
Page
•
Added ESD Ratings table, Feature Description section, Device Functional Modes section, Application and
Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation
Support section, and Mechanical, Packaging, and Orderable Information section ............................................................... 1
Changes from Revision H (April 2013) to Revision I
Page
•
Added some of the latest inclusions from new TI formatting and made available of the automotive grade for the
SOT-23 package..................................................................................................................................................................... 1
Changes from Revision G (July 2012) to Revision H
Page
•
Changed layout of National Data Sheet to TI format ............................................................................................................. 1
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
5 Pin Configuration and Functions
DBZ Package
3-Pin SOT-23
Top View
LP Package
3-Pin TO-92
Bottom View
1
NC
+
œ
+
3(1)
2
œ
DCK Package
5-Pin SC70
Top View
1
5
4
œ
NC
NC
2
3
NC(2)
+
Pin Functions
PIN
I/O
DESCRIPTION
NAME
Anode
Cathode
NC
SOT-23
TO-92
SC70
1
2
1
3(1)
1
2
O
I/O
—
—
Anode pin, normally grounded
Shunt Current/Output Voltage
Must float or connect to anode
No connect
3
2(2)
—
3
NC
—
4, 5
(1) This pin must be left floating or connected to pin 2.
(2) This pin must be left floating or connected to pin 1.
4
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)(2)
MIN
MAX
20
UNIT
mA
mA
mW
mW
mW
°C
Reverse current
Forward current
10
SOT-23 (M3) package
306
550
241
260
260
260
150
Power dissipation (TA
25°C)(3)
=
TO-92 (Z) package
SC70 (M7) package
SOT-23 (M3) Package Peak Reflow (30 sec)
TO-92 (Z) Package Soldering (10 sec)
SC70 (M7) Package Peak Reflow (30 sec)
Soldering temperature(4)
°C
°C
Storage temperature
–65
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature),
RθJA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any
temperature is PDmax = (TJmax − TA)/RθJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040-N,
TJmax = 125°C, and the typical thermal resistance (RθJA), when board mounted, is 326°C/W for the SOT-23 package, and 180°C/W with
0.4″ lead length and 170°C/W with 0.125″ lead length for the TO-92 package and 415°C/W for the SC70 Package.
(4) For definitions of Peak Reflow Temperatures for Surface Mount devices, see the TI Absolute Maximum Ratings for Soldering Application
Report (SNOA549).
6.2 ESD Ratings
VALUE
UNIT
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)
±2000
V(ESD)
Electrostatic discharge
V
Charged-device model (CDM), per JEDEC specification JESD22-
C101(2)
±200
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)(1)(2)
MIN
MAX
UNIT
°C
Industrial Temperature
Extended Temperature
LM4040-N-2.0
–40°C ≤ TA ≤ 85
Temperature
(Tmin ≤ TA ≤ Tmax
)
–40 ≤ TA ≤ 125°C
°C
60
60
15
15
15
15
15
15
15
μA to mA
μA to mA
μA to mA
μA to mA
μA to mA
μA to mA
μA to mA
LM4040-N-2.5
LM4040-N-3.0
62
Reverse Current
LM4040-N-4.1
68
LM4040-N-5.0
74
LM4040-N-8.2
91
LM4040-N-10.0
100
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended Operating Conditions indicate
conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test
conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance
characteristics may degrade when the device is not operated under the listed test conditions.
(2) The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature),
RθJA (junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any
temperature is PDmax = (TJmax − TA)/RθJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4040-N,
TJmax = 125°C, and the typical thermal resistance (RθJA), when board mounted, is 326°C/W for the SOT-23 package, and 180°C/W with
0.4″ lead length and 170°C/W with 0.125″ lead length for the TO-92 package and 415°C/W for the SC70 package.
6.4 Thermal Information
LM4040-N/LM4040-N-Q1
THERMAL METRIC(1)
DBZ (SOT-23)
3 PINS
291.9
114.3
62.3
LP (TO-92)
3 PINS
166
DCK (SC70)
5 PINS
267
UNIT
RθJA
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
RθJC(top)
RθJB
88.2
95.6
145.2
32.5
48.1
ψJT
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
7.4
2.4
ψJB
61
N/A
47.3
RθJC(bot)
N/A
N/A
N/A
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application
report, SPRA953.
6
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
6.5 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
2.048
V
LM4040AIM3
LM4040AIZ
±2
±4.1
±15
±17
mV
mV
LM4040BIM3
LM4040BIZ
LM4040BIM7
VR
Reverse Breakdown
Voltage Tolerance(2)
IR = 100 μA
LM4040AIM3
LM4040AIZ
TA = TJ = TMIN to
TMAX
LM4040BIM3
LM4040BIZ
LM4040BIM7
TA = TJ = TMIN to
TMAX
TA = TJ = 25°C
45
60
65
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
IR = 10 mA
IR = 1 mA
±20
±15
ppm/°C
ppm/°C
ppm/°C
mV
Average Reverse
Breakdown Voltage
Temperature
TA = TJ = 25°C
ΔVR/ΔT
TA = TJ = TMIN to TMAX
±100
Coefficient(2)
IR = 100 μA
±15
0.3
TA = TJ = 25°C
0.8
1
IRMIN ≤ IR ≤ 1 mA
Reverse Breakdown
ΔVR/ΔI Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Operating Current
R
2.5
6
Change(3)
1 mA ≤ IR ≤ 15 mA
mV
TA = TJ = TMIN to TMAX
8
IR = 1 mA, f = 120
Hz,
IAC = 0.1 IR
Reverse Dynamic
Impedance
ZR
0.3
35
0.8
Ω
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
μVrms
ppm
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
ΔVR
120
VHYST Thermal Hysteresis(4)
ΔT = –40°C to 125°C
0.08%
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5 V ×
0.75% = ±19 mV.
(3) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(4) Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.6 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
2.048
V
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
±10
±23
±20
±40
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
VR
LM4040DIM3
LM4040DIZ
LM4040DIM7
Reverse Breakdown
Voltage Tolerance(3)
IR = 100 μA
mV
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±41
±60
60
LM4040EIZ
LM4040EIM7
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
45
45
45
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
65
65
70
LM4040DIM3
LM4040DIZ
LM4040DIM7
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
65
70
LM4040EIZ
LM4040EIM7
TA = TJ = TMIN to TMAX
IR = 10 mA
±20
±15
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
Average Reverse
Breakdown Voltage
Temperature
LM4040DIM3
LM4040DIZ
LM4040DIM7
±15
ΔVR/ΔT
IR = 1 mA
ppm/°C
TA = TJ = TMIN to TMAX
±150
±150
Coefficient(3)
TA = TJ = 25°C
±15
±15
LM4040EIZ
LM4040EIM7
TA = TJ = TMIN to TMAX
IR = 100 μA
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
8
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I' (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
0.3
0.8
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1
1
LM4040DIM3
LM4040DIZ
LM4040DIM7
0.3
IRMIN ≤ IR ≤ 1 mA
TA = TJ = TMIN to TMAX
1.2
TA = TJ = 25°C
0.3
2.5
1
1.2
6
LM4040EIZ
LM4040EIM7
Reverse Breakdown
Voltage Change
with Operating
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
ΔVR/ΔIR
mV
LM4040CIM3
LM4040CIZ
LM4040CIM7
Current Change(4)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
8
8
LM4040DIM3
LM4040DIZ
LM4040DIM7
2.5
2.5
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
10
TA = TJ = 25°C
8
LM4040EIZ
LM4040EIM7
TA = TJ = TMIN to TMAX
10
LM4040CIM3
LM4040CIZ
LM4040CIM7
0.3
0.3
0.9
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz LM4040DIM3
ZR
Ω
IAC = 0.1 IR
LM4040DIZ
LM4040DIM7
1.1
1.1
LM4040EIZ
LM4040EIM7
0.3
35
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
μVrms
Reverse Breakdown t = 1000 hrs
ΔVR
Voltage Long Term
Stability
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
Thermal
VHYST
ΔT = −40°C to 125°C
0.08%
Hysteresis(5)
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.7 Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E'
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
2.048
V
TA = TJ = 25°C
±10
±30
±20
±50
±41
±70
60
LM4040CEM3
LM4040DEM3
LM4040EEM3
LM4040CEM3
LM4040DEM3
LM4040EEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
VR
Reverse Breakdown
Voltage Tolerance(3)
mV
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
45
45
45
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
68
65
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
73
65
TA = TJ = TMIN to TMAX
73
IR = 10 mA
IR = 1 mA
±20
±15
TA = TJ = 25°C
LM4040CEM3
LM4040DEM3
LM4040EEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
±150
Average Reverse
Breakdown Voltage
Temperature
±15
±15
ΔVR/ΔT
ppm/°C
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Coefficient(3)
TA = TJ = TMIN to TMAX
IR = 100 μA
±15
0.3
TA = TJ = 25°C
0.8
1
LM4040CEM3
LM4040DEM3
LM4040EEM3
LM4040CEM3
LM4040DEM3
LM4040EEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
0.3
0.3
2.5
2.5
2.5
1
IRMIN ≤ IR ≤ 1 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.2
1
Reverse Breakdown
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.2
6
ΔVR/ΔI Voltage Change with
mV
Operating Current
R
Change(4)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
8
8
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
10
8
TA = TJ = TMIN to TMAX
10
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
10
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
LM4040CEM3
0.3
0.9
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
LM4040DEM3
0.3
1.1
Ω
LM4040EEM3
0.3
1.1
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
35
120
μVrms
Reverse Breakdown t = 1000 hrs
ΔVR
Voltage Long Term
Stability
T = 25°C ±0.1°C
IR = 100 μA
ppm
Thermal
VHYST
ΔT = −40°C to 125°C
0.08%
Hysteresis(5)
(5) Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C
measurement after cycling to temperature 125°C.
6.8 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I' (AEC Grade 3)
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
2.5
V
LM4040AIM3
LM4040AIZ
LM4040AIM3
TA = TJ = 25°C
±2.5
±19
±5
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
VR
Reverse Breakdown
Voltage Tolerance(3)
mV
LM4040BIM3
LM4040BIZ
LM4040BIM7
LM4040QBIM3
TA = TJ = TMIN to TMAX
±21
TA = TJ = 25°C
45
60
65
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
IR = 10 mA
IR = 1 mA
±20
±15
Average Reverse
Breakdown Voltage
Temperature
TA = TJ = 25°C
ΔVR/ΔT
ppm/°C
TA = TJ = TMIN to TMAX
±100
Coefficient(3)
IR = 100 μA
±15
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade
'I' (AEC Grade 3) (continued)
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
TA = TJ = 25°C
0.3
0.8
1
I
RMIN ≤ IR ≤ 1 mA
Reverse Breakdown
ΔVR/ΔI Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
Operating Current
R
2.5
6
Change(4)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
8
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
0.3
35
0.8
Ω
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
ΔVR
120
ppm
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C
measurement after cycling to temperature 125°C.
12
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
6.9 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', and 'E';
Temperature Grade 'I' (AEC Grade 3)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
2.5
V
LM4040CIZ
TA = TJ = 25°C
±12
±29
±25
±49
±50
±74
60
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040DIZ
VR
Reverse Breakdown
Voltage Tolerance(3)
LM4040DIM3
LM4040DIM7
LM4040QDIM3
IR = 100 μA
mV
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040CIZ
45
45
45
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
65
LM4040DIZ
65
Minimum Operating
Current
LM4040DIM3
LM4040DIM7
LM4040QDIM3
IRMIN
μA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
70
LM4040EIZ
65
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = TMIN to TMAX
70
IR = 10 mA
±20
±15
LM4040CIZ
TA = TJ = 25°C
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
±150
Average Reverse
Breakdown Voltage
Temperature
LM4040DIZ
±15
±15
±15
LM4040DIM3
LM4040DIM7
LM4040QDIM3
ΔVR/ΔT
IR = 1 mA
ppm/°C
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Coefficient(3)
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = TMIN to TMAX
IR = 100 μA
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', and 'E'; Temperature
Grade 'I' (AEC Grade 3) (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
LM4040CIZ
TA = TJ = 25°C
0.3
0.8
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1
1
LM4040DIZ
0.3
0.3
2.5
2.5
2.5
LM4040DIM3
LM4040DIM7
LM4040QDIM3
IRMIN ≤ IR ≤ 1 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.2
1
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
Reverse Breakdown
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.2
6
ΔVR/ΔI Voltage Change with
mV
Operating Current
R
LM4040CIZ
Change(4)
LM4040CIM3
LM4040CIM7
LM4040QCIM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
8
LM4040DIZ
8
LM4040DIM3
LM4040DIM7
LM4040QDIM3
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
10
8
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
TA = TJ = TMIN to TMAX
10
LM4040CIZ
LM4040CIM3
LM4040CIM7
LM4040QCIM3
0.3
0.3
0.3
0.9
1.1
1.1
LM4040DIZ
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz
IAC = 0.1 IR
LM4040DIM3
LM4040DIM7
LM4040QDIM3
ZR
Ω
LM4040EIZ
LM4040EIM3
LM4040EIM7
LM4040QEIM3
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
35
120
μVrms
Reverse Breakdown t = 1000 hrs
ΔVR
Voltage Long Term
Stability
T = 25°C ±0.1°C
IR = 100 μA
ppm
Thermal
VHYST
ΔT= −40°C to 125°C
0.08%
Hysteresis(5)
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at 25°C after cycling to temperature –40°C and the 25°C
measurement after cycling to temperature 125°C.
14
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
6.10 Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E';
Temperature Grade 'E' (AEC Grade 1)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
2.5
V
TA = TJ = 25°C
±12
±38
±25
±63
±50
±88
60
LM4040CEM3
LM4040QCEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
VR
Reverse Breakdown
Voltage Tolerance(3)
LM4040DEM3
LM4040QDEM3
mV
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040EEM3
LM4040QEEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
45
45
45
LM4040CEM3
LM4040QCEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
68
65
Minimum Operating
Current
LM4040DEM3
LM4040QDEM3
IRMIN
μA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
73
65
LM4040EEM3
LM4040QEEM3
TA = TJ = TMIN to TMAX
73
Average Reverse
Breakdown Voltage
Temperature
IR = 10 mA
IR = 1 mA
±20
±15
LM4040CEM3
LM4040QCEM3
TA = TJ = 25°C
Coefficient(3)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
±150
LM4040DEM3
LM4040QDEM3
±15
±15
ΔVR/ΔT
ppm/°C
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040EEM3
LM4040QEEM3
TA = TJ = TMIN to TMAX
IR = 100 μA
±15
0.3
TA = TJ = 25°C
0.8
1
LM4040CEM3
LM4040QCEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
0.3
0.3
2.5
2.5
2.5
1
LM4040DEM3
LM4040QDEM3
IRMIN ≤ IR ≤ 1 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.2
1
LM4040EEM3
LM4040QEEM3
Reverse Breakdown
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.2
6
ΔVR/ΔI Voltage Change
mV
with Operating
R
LM4040CEM3
LM4040QCEM3
Current Change(4)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
8
8
LM4040DEM3
LM4040QDEM3
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
10
8
LM4040EEM3
LM4040QEEM3
TA = TJ = TMIN to TMAX
10
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
15
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 2.5-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' (AEC Grade 1) (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
LM4040CEM3
LM4040QCEM3
0.3
0.9
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
LM4040DEM3
LM4040QDEM3
ZR
0.3
0.3
35
1.1
1.1
Ω
LM4040EEM3
LM4040QEEM3
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
μVrms
Reverse Breakdown t = 1000 hrs
ΔVR
Voltage Long Term
Stability
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
Thermal
VHYST
ΔT= −40°C to 125°C
0.08%
Hysteresis(5)
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
16
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
6.11 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
3
V
TA = TJ = 25°C
±3
±22
±6
LM4040AIM3
LM4040AIZ
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
LM4040BIM3
LM4040BIZ
LM4040BIM7
TA = TJ = TMIN to TMAX
±26
TA = TJ = 25°C
47
62
67
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
IR = 10 mA
IR = 1 mA
±20
±15
Average Reverse
Breakdown Voltage
Temperature
TA = TJ = 25°C
ΔVR/ΔT
ppm/°C
TA = TJ = TMIN to TMAX
±100
Coefficient(3)
IR = 100 μA
±15
0.6
TA = TJ = 25°C
0.8
1.1
6
IRMIN ≤ IR ≤ 1 mA
Reverse Breakdown
ΔVR/ΔI Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
Operating Current
R
2.7
Change(4)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
9
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
0.4
35
0.9
Ω
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
ΔVR
120
ppm
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
17
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.12 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E';
Temperature Grade 'I'
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2) MAX(1)
UNIT
Reverse Breakdown IR = 100 μA
3
V
Voltage
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
±15
±34
±30
±59
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
VR
LM4040DIM3
LM4040DIZ
LM4040DIM7
Reverse Breakdown
IR = 100 μA
mV
Voltage Tolerance(3)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±60
±89
LM4040EIM7
LM4040EIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
45
45
45
60
65
65
70
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
65
70
LM4040EIM7
LM4040EIZ
TA = TJ = TMIN to TMAX
IR = 10 mA
±20
±15
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
Average Reverse
LM4040DIM3
LM4040DIZ
LM4040DIM7
±15
Breakdown Voltage
ΔVR/ΔT
IR = 1 mA
ppm/°C
Temperature
TA = TJ = TMIN to TMAX
±150
±150
Coefficient(3)
TA = TJ = 25°C
±15
±15
LM4040EIM7
LM4040EIZ
TA = TJ = TMIN to TMAX
IR = 100 μA
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The overtemperature limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
18
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'I' (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2) MAX(1)
UNIT
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
0.4
0.8
1.1
1.1
1.3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040DIM3
LM4040DIZ
LM4040DIM7
0.4
IRMIN ≤ IR ≤ 1 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
0.4
2.7
1.1
1.3
6
LM4040EIM7
LM4040EIZ
Reverse Breakdown
ΔVR/ΔI Voltage Change
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
with Operating
R
LM4040CIM3
LM4040CIZ
LM4040CIM7
Current Change(4)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
9
8
LM4040DIM3
LM4040DIZ
LM4040DIM7
2.7
2.7
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
11
TA = TJ = 25°C
8
LM4040EIM7
LM4040EIZ
TA = TJ = TMIN to TMAX
11
LM4040CIM3
LM4040CIZ
LM4040CIM7
0.4
0.4
0.9
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz LM4040DIM3
ZR
Ω
IAC = 0.1 IR
LM4040DIZ
LM4040DIM7
1.2
1.2
LM4040EIM7
LM4040EIZ
0.4
35
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
μVrms
Reverse Breakdown t = 1000 hrs
ΔVR
Voltage Long Term
Stability
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
Thermal
VHYST
ΔT = −40°C to 125°C
0.08%
Hysteresis(5)
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
19
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.13 Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E';
Temperature Grade 'E'
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
3
V
TA = TJ = 25°C
±15
±45
±30
±75
±60
±105
62
LM4040CEM3
LM4040DEM3
LM4040EEM3
LM4040CEM3
LM4040DEM3
LM4040EEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
VR
Reverse Breakdown
Voltage Tolerance(3)
mV
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
47
47
47
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
70
67
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
75
67
TA = TJ = TMIN to TMAX
75
IR = 10 mA
IR = 1 mA
±20
±15
TA = TJ = 25°C
LM4040CEM3
LM4040DEM3
LM4040EEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
±150
Average Reverse
Breakdown Voltage
Temperature
±15
±15
ΔVR/ΔT
ppm/°C
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Coefficient(3)
TA = TJ = TMIN to TMAX
IR = 100 μA
±15
0.4
TA = TJ = 25°C
0.8
1.1
1.1
1.3
1.1
1.3
6.0
9
LM4040CEM3
LM4040DEM3
LM4040EEM3
LM4040CEM3
LM4040DEM3
LM4040EEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
0.4
0.4
2.7
2.7
2.7
I
RMIN ≤ IR ≤ 1 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Change
with Operating
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
ΔVR/ΔIR
mV
Current Change(4)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
8
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
11.0
8
TA = TJ = TMIN to TMAX
11.0
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
20
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Electrical Characteristics: 3-V LM4040-N VR Tolerance Grades 'C', 'D', And 'E'; Temperature
Grade 'E' (continued)
all other limits TA = TJ = 25°C. The grades C, D and E designate initial Reverse Breakdown Voltage tolerances of ±0.5%, ±1%
and ±2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
LM4040CEM3
0.4
0.9
IR = 1 mA, f = 120
Hz,
Reverse Dynamic
Impedance
ZR
LM4040DEM3
0.4
1.2
Ω
IAC = 0.1 IR
LM4040EEM3
0.4
1.2
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
35
120
μVrms
Reverse Breakdown t = 1000 hrs
Voltage Long Term T = 25°C ±0.1°C
ΔVR
ppm
Stability
IR = 100 μA
Thermal
VHYST
ΔT = −40°C to 125°C
0.08%
Hysteresis(5)
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
6.14 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
4.096
V
TA = TJ = 25°C
±4.1
±31
LM4040AIM3
LM4040AIZ
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
LM4040BIM3
LM4040BIZ
LM4040BIM7
±8.2
TA = TJ = TMIN to TMAX
±35
TA = TJ = 25°C
50
68
73
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
IR = 10 mA
IR = 1 mA
±30
±20
Average Reverse
Breakdown Voltage
Temperature
TA = TJ = 25°C
ΔVR/ΔT
ppm/°C
TA = TJ = TMIN to TMAX
±100
Coefficient(3)
IR = 100 μA
±20
0.5
TA = TJ = 25°C
0.9
1.2
7
IRMIN ≤ IR ≤ 1 mA
Reverse Breakdown
ΔVR/ΔI Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
Operating Current
R
3
Change(4)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
10
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
21
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade
'I' (continued)
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
eN
0.5
1
Ω
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Wideband Noise
80
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 100 μA
ΔVR
120
ppm
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
6.15 Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'C' and 'D'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
4.096
V
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
±20
±47
±41
±81
68
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
LM4040CIM7
50
50
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
73
Minimum Operating
Current
IRMIN
μA
LM4040DIM3
LM4040DIZ
LM4040DIM7
73
TA = TJ = TMIN to TMAX
78
IR = 10 mA
IR = 1 mA
±30
±20
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
Average Reverse
ΔVR/ Breakdown Voltage
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
ppm/°C
ΔT
Temperature
LM4040DIM3
LM4040DIZ
LM4040DIM7
±20
±20
Coefficient(3)
TA = TJ = TMIN to TMAX
IR = 100 μA
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
22
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Electrical Characteristics: 4.1-V LM4040-N VR Tolerance Grades 'C' and 'D'; Temperature Grade
'I' (continued)
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
0.5
0.9
TA = TJ = TMIN to TMAX
1.2
1.2
1.5
7
I
RMIN ≤ IR ≤ 1 mA
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
0.5
3
Reverse Breakdown
TA = TJ = TMIN to TMAX
ΔVR/ Voltage Change with
mV
ΔIR
Operating Current
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
Change(4)
TA = TJ = TMIN to TMAX
10
9
1 mA ≤ IR ≤ 15 mA
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = 25°C
3
TA = TJ = TMIN to TMAX
13
LM4040CIM3
LM4040CIZ
LM4040CIM7
0.5
1
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
Ω
LM4040DIM3
LM4040DIZ
LM4040DIM7
0.5
80
1.3
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
μVrms
Reverse Breakdown
t = 1000 hrs
ΔVR Voltage Long Term
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
Stability
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
6.16 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
5
V
TA = TJ = 25°C
±5
±38
±10
LM4040AIM3
LM4040AIZ
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
LM4040BIM3
LM4040BIZ
LM4040BIM7
TA = TJ = TMIN to TMAX
±43
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
23
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade
'I' (continued)
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
TA = TJ = 25°C
54
74
Minimum Operating
Current
IRMIN
μA
TA = TJ = TMIN to TMAX
80
IR = 10 mA
IR = 1 mA
±30
±20
Average Reverse
ΔVR/Δ Breakdown Voltage
TA = TJ = 25°C
ppm/°C
mV
T
Temperature
TA = TJ = TMIN to TMAX
±100
Coefficient(3)
IR = 100 μA
±20
0.5
TA = TJ = 25°C
1
1.4
8
IRMIN ≤ IR ≤ 1 mA
Reverse Breakdown
ΔVR/Δ Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
IR
Operating Current
3.5
Change(4)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
12
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
eN
0.5
80
1.1
Ω
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Wideband Noise
μVrms
Reverse Breakdown
t = 1000 hrs
ΔVR Voltage Long Term
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
Stability
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
6.17 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
5
V
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
±25
±58
±50
±99
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = TMIN to TMAX
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
24
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature Grade
'I' (continued)
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
54
74
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
80
79
85
Minimum Operating
Current
IRMIN
μA
LM4040DIM3
LM4040DIZ
LM4040DIM7
54
TA = TJ = TMIN to TMAX
IR = 10 mA
IR = 1 mA
±30
±20
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
Average Reverse
ΔVR/Δ Breakdown Voltage
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
ppm/°C
T
Temperature
LM4040DIM3
LM4040DIZ
LM4040DIM7
±20
Coefficient(3)
TA = TJ = TMIN to TMAX
IR = 100 μA
±20
0.5
LM4040CIM3
LM4040CIZ
LM4040CIM7
TA = TJ = 25°C
1
1.4
1.3
1.8
8
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
IRMIN ≤ IR ≤ 1 mA
LM4040DIM3
LM4040DIZ
LM4040DIM7
0.5
3.5
3.5
0.5
80
Reverse Breakdown
ΔVR/Δ Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
IR
Operating Current
LM4040CIM3
LM4040CIZ
LM4040CIM7
Change(4)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
12
10
15
1 mA ≤ IR ≤ 15 mA
LM4040DIM3
LM4040DIZ
LM4040DIM7
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.1
1.5
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
eN
Ω
TA = TJ = TMIN to TMAX
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Wideband Noise
μVrms
Reverse Breakdown
t = 1000 hrs
ΔVR Voltage Long Term
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
Stability
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
25
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.18 Electrical Characteristics: 5-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature
Grade 'E'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 100 μA
IR = 100 μA
5
V
TA = TJ = 25°C
±25
±75
±50
±125
74
LM4040CEM3
LM4040DEM3
LM4040CEM3
LM4040DEM3
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(2)
mV
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
54
54
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
83
Minimum Operating
Current
IRMIN
μA
79
TA = TJ = TMIN to TMAX
88
IR = 10 mA
IR = 1 mA
±30
±20
TA = TJ = 25°C
LM4040CEM3
LM4040DEM3
Average Reverse
ΔVR/ Breakdown Voltage
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
ppm/°C
ΔT
Temperature
±20
Coefficient(2)
TA = TJ = TMIN to TMAX
IR = 100 μA
±20
0.5
TA = TJ = 25°C
1
1.4
1
LM4040CEM3
LM4040DEM3
LM4040CEM3
LM4040DEM3
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
I
RMIN ≤ IR ≤ 1 mA
0.5
3.5
3.5
Reverse Breakdown
ΔVR/ Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1.8
8
mV
ΔIR
Operating Current
Change(3)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
12
8
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
15
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
eN
0.5
80
1.1
Ω
IR = 100 μA
10 Hz ≤ f ≤ 10 kHz
Wideband Noise
μVrms
Reverse Breakdown
t = 1000 hrs
ΔVR Voltage Long Term
T = 25°C ±0.1°C
IR = 100 μA
120
ppm
Stability
VHYST Thermal Hysteresis(4)
ΔT = −40°C to 125°C
0.08%
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(3) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(4) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
26
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
6.19 Electrical Characteristics: 8.2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 150 μA
IR = 150 μA
8.192
V
TA = TJ = 25°C
±8.2
±61
±16
±70
91
LM4040AIM3
LM4040AIZ
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
μA
LM4040BIM3
LM4040BIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
67
Minimum Operating
Current
IRMIN
TA = TJ = TMIN to TMAX
95
IR = 10 mA
IR = 1 mA
±40
±20
Average Reverse
Breakdown Voltage
Temperature
TA = TJ = 25°C
ΔVR/ΔT
ppm/°C
TA = TJ = TMIN to TMAX
±100
Coefficient(3)
IR = 150 μA
±20
0.6
TA = TJ = 25°C
1.3
2.5
10
IRMIN ≤ IR ≤ 1 mA
Reverse Breakdown
ΔVR/ΔI Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
Operating Current
R
7
Change(4)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
18
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
0.6
1.5
Ω
IR = 150 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
130
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 150 μA
ΔVR
120
ppm
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
27
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.20 Electrical Characteristics: 8.2-V Lm4040-N VR Tolerance Grades 'C' And 'D'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 150 μA
IR = 150 μA
8.192
V
TA = TJ = 25°C
±41
±94
±82
±162
91
LM4040CIM3
LM4040CIZ
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
LM4040DIM3
LM4040DIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
67
67
LM4040CIM3
LM4040CIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
95
Minimum Operating
Current
IRMIN
μA
96
LM4040DIM3
LM4040DIZ
TA = TJ = TMIN to TMAX
100
IR = 10 mA
IR = 1 mA
±40
±20
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
Average Reverse
Breakdown Voltage
Temperature
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
ΔVR/ΔT
ppm/°C
±20
LM4040DIM3
LM4040DIZ
Coefficient(3)
TA = TJ = TMIN to TMAX
IR = 150 μA
±20
0.6
TA = TJ = 25°C
1.3
2.5
1.7
3
LM4040CIM3
LM4040CIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
IRMIN ≤ IR ≤ 1 mA
0.6
7
LM4040DIM3
LM4040DIZ
Reverse Breakdown
ΔVR/ΔI Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
Operating Current
R
10
18
15
24
LM4040CIM3
LM4040CIZ
Change(4)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1 mA ≤ IR ≤ 15 mA
7
LM4040DIM3
LM4040DIZ
TA = TJ = TMIN to TMAX
LM4040CIM3
LM4040CIZ
0.6
0.6
1.5
1.9
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
Ω
LM4040DIM3
LM4040DIZ
IR = 150 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
130
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 150 μA
ΔVR
120
ppm
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
28
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
6.21 Electrical Characteristics: 10-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades A and B designate initial Reverse Breakdown Voltage tolerances of ±0.1% and
±0.2%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1)
TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 150 μA
IR = 150 μA
10
V
TA = TJ = 25°C
±10
±75
±20
±85
100
103
LM4040AIM3
LM4040AIZ
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
μA
LM4040BIM3
LM4040BIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
75
Minimum Operating
Current
IRMIN
TA = TJ = TMIN to TMAX
IR = 10 mA
IR = 1 mA
±40
±20
Average Reverse
Breakdown Voltage
Temperature
TA = TJ = 25°C
ΔVR/ΔT
ppm/°C
TA = TJ = TMIN to TMAX
±100
Coefficient(3)
IR = 150 μA
±20
0.8
TA = TJ = 25°C
1.5
3.5
12
IRMIN ≤ IR ≤ 1 mA
Reverse Breakdown
ΔVR/ΔI Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
mV
Operating Current
R
8
Change(4)
1 mA ≤ IR ≤ 15 mA
TA = TJ = TMIN to TMAX
23
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
0.7
1.7
Ω
IR = 150 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
180
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 150 μA
ΔVR
120
ppm
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
29
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.22 Electrical Characteristics: 10-V LM4040-N VR Tolerance Grades 'C' And 'D'; Temperature
Grade 'I'
all other limits TA = TJ = 25°C. The grades C and D designate initial Reverse Breakdown Voltage tolerances of ±0.5% and
±1%, respectively.
PARAMETER
TEST CONDITIONS
MIN(1) TYP(2)
MAX(1)
UNIT
Reverse Breakdown
Voltage
IR = 150 μA
IR = 150 μA
10
V
TA = TJ = 25°C
±50
±115
±100
±198
100
LM4040CIM3
LM4040CIZ
VR
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
Reverse Breakdown
Voltage Tolerance(3)
mV
LM4040DIM3
LM4040DIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
75
75
LM4040CIM3
LM4040CIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
103
Minimum Operating
Current
IRMIN
μA
110
LM4040DIM3
LM4040DIZ
TA = TJ = TMIN to TMAX
113
IR = 10 mA
IR = 1 mA
±40
±20
TA = TJ = 25°C
LM4040CIM3
LM4040CIZ
Average Reverse
Breakdown Voltage
Temperature
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
±100
±150
ΔVR/ΔT
ppm/°C
±20
LM4040DIM3
LM4040DIZ
Coefficient(3)
TA = TJ = TMIN to TMAX
IR = 150 μA
±20
0.8
TA = TJ = 25°C
1.5
3.5
2
LM4040CIM3
LM4040CIZ
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
IRMIN ≤ IR ≤ 1 mA
0.8
8
LM4040DIM3
LM4040DIZ
Reverse Breakdown
ΔVR/ΔI Voltage Change with
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
4
mV
Operating Current
R
12
23
18
29
LM4040CIM3
LM4040CIZ
Change(4)
TA = TJ = TMIN to TMAX
TA = TJ = 25°C
1 mA ≤ IR ≤ 15 mA
8
LM4040DIM3
LM4040DIZ
TA = TJ = TMIN to TMAX
LM4040CIM3
LM4040CIZ
0.7
1.7
2.3
Reverse Dynamic
Impedance
IR = 1 mA, f = 120 Hz,
IAC = 0.1 IR
ZR
Ω
LM4040DIM3
LM4040DIZ
IR = 150 μA
10 Hz ≤ f ≤ 10 kHz
eN
Wideband Noise
180
μVrms
Reverse Breakdown
Voltage Long Term
Stability
t = 1000 hrs
T = 25°C ±0.1°C
IR = 150 μA
ΔVR
120
ppm
VHYST Thermal Hysteresis(5)
ΔT = −40°C to 125°C
0.08%
(1) Limits are 100% production tested at 25°C. Limits over temperature are ensured through correlation using Statistical Quality Control
(SQC) methods. The limits are used to calculate AOQL.
(2) Typicals are at TJ = 25°C and represent most likely parametric norm.
(3) The (overtemperature) limit for Reverse Breakdown Voltage Tolerance is defined as the room temperature Reverse Breakdown Voltage
Tolerance ±[(ΔVR/ΔT)(maxΔT)(VR)]. Where, ΔVR/ΔT is the VR temperature coefficient, maxΔT is the maximum difference in temperature
from the reference point of 25°C to T MIN or TMAX, and VR is the reverse breakdown voltage. The total overtemperature tolerance for the
different grades in the industrial temperature range where maxΔT = 65°C is shown below:
A-grade: ±0.75% = ±0.1% ±100 ppm/°C × 65°C
B-grade: ±0.85% = ±0.2% ±100 ppm/°C × 65°C
C-grade: ±1.15% = ±0.5% ±100 ppm/°C × 65°C
D-grade: ±1.98% = ±1.0% ±150 ppm/°C × 65°C
E-grade: ±2.98% = ±2.0% ±150 ppm/°C × 65°C
The total overtemperature tolerance for the different grades in the extended temperature range where max ΔT = 100 °C is shown below:
C-grade: ±1.5% = ±0.5% ±100 ppm/°C × 100°C
D-grade: ±2.5% = ±1.0% ±150 ppm/°C × 100°C
E-grade: ±3.5% = ±2.0% ±150 ppm/°C × 100°C
Therefore, as an example, the A-grade 2.5-V LM4040-N has an overtemperature Reverse Breakdown Voltage tolerance of ±2.5V ×
0.75% = ±19 mV.
(4) Load regulation is measured on pulse basis from no load to the specified load current. Output changes due to die temperature change
must be taken into account separately.
(5) Thermal hysteresis is defined as the difference in voltage measured at +25°C after cycling to temperature -40°C and the 25°C
measurement after cycling to temperature 125°C.
30
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
6.23 Typical Characteristics
Figure 1. Temperature Drift For Different Average
Figure 2. Output Impedance vs Frequency
Temperature Coefficient
Figure 3. Output Impedance vs Frequency
Figure 4. Reverse Characteristics And Minimum Operating
Current
Figure 5. Noise Voltage vs Frequency
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
31
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
6.23.1 Start-Up Characteristics
RS = 30k
RS = 30k
Figure 7. Input Voltage Step Response LM4040-N-5
Figure 6. Input Voltage Step Response LM4040-N-2.5
RS = 30k
Figure 8. Input Voltage Step Response LM4040-N-10
7 Parameter Measurement Information
Figure 9. Test Circuit
32
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
8 Detailed Description
8.1 Overview
The LM4040 device is a precision micropower shunt voltage reference available in 7 different fixed-output
voltage options and three different packages to meet small footprint requirements. The part is also available in
five different tolerance grades.
8.2 Functional Block Diagram
8.3 Feature Description
The LM4040 device is effectively a precision Zener diode. The part requires a small quiescent current for
regulation, and regulates the output voltage by shunting more or less current to ground, depending on input
voltage and load. The only external component requirement is a resistor between the cathode and the input
voltage to set the input current. An external capacitor can be used on the input or output, but is not required.
8.4 Device Functional Modes
The LM4040 device is a fixed output voltage part, where the feedback is internal. Therefore, the part can only
operate is a closed loop mode and the output voltage cannot be adjusted. The output voltage will remain in
regulation as long as IR is between IRMIN, see Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A'
And 'B'; Temperature Grade 'I', and IRMAX, 15 mA. Proper selection of the external resistor for input voltage range
and load current range will ensure these conditions are met.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
33
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
9 Application and Implementation
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The LM4040-N is a precision micropower curvature-corrected bandgap shunt voltage reference. For space
critical applications, the LM4040-N is available in the sub-miniature SOT-23 and SC70 surface-mount package.
The LM4040-N has been designed for stable operation without the need of an external capacitor connected
between the + pin and the − pin. If, however, a bypass capacitor is used, the LM4040-N remains stable.
Reducing design effort is the availability of several fixed reverse breakdown voltages: 2.048 V, 2.5 V, 3 V, 4.096
V, 5 V, 8.192 V, and 10 V. The minimum operating current increases from 60 µA for the LM4040-N-2.048 and
LM4040-N-2.5 to 100 μA for the 10-V LM4040-N. All versions have a maximum operating current of 15 mA.
LM4040-Ns in the SOT-23 packages have a parasitic Schottky diode between pin 2 (−) and pin 3 (Die attach
interface contact). Therefore, pin 3 of the SOT-23 package must be left floating or connected to pin 2.
LM4040-Ns in the SC70 have a parasitic Schottky diode between pin 1 (−) and pin 2 (Die attach interface
contact). Therefore, pin 2 must be left floating or connected to pin1.
The 4.096-V version allows single 5-V 12-bit ADCs or DACs to operate with an LSB equal to 1 mV. For 12-bit
ADCs or DACs that operate on supplies of 10 V or greater, the 8.192-V version gives 2 mV per LSB.
The typical thermal hysteresis specification is defined as the change in 25°C voltage measured after thermal
cycling. The device is thermal cycled to temperature –40°C and then measured at 25°C. Next the device is
thermal cycled to temperature 125°C and again measured at 25°C. The resulting VOUT delta shift between the
25°C measurements is thermal hysteresis. Thermal hysteresis is common in precision references and is induced
by thermal-mechanical package stress. Changes in environmental storage temperature, operating temperature
and board mounting temperature are all factors that can contribute to thermal hysteresis.
In a conventional shunt regulator application (Figure 10) , an external series resistor (RS) is connected between
the supply voltage and the LM4040-N. RS determines the current that flows through the load (IL) and the
LM4040-N (IQ). Since load current and supply voltage may vary, RS should be small enough to supply at least
the minimum acceptable IQ to the LM4040-N even when the supply voltage is at its minimum and the load
current is at its maximum value. When the supply voltage is at its maximum and IL is at its minimum, RS should
be large enough so that the current flowing through the LM4040-N is less than 15 mA.
RS is determined by the supply voltage, (VS), the load and operating current, (IL and IQ), and the LM4040-N's
reverse breakdown voltage, VR.
(1)
9.2 Typical Applications
9.2.1 Shunt Regulator
Figure 10. Shunt Regulator Schematic
34
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Typical Applications (continued)
9.2.1.1 Design Requirements
VIN > VOUT
Select RS such that:
IRMIN < IR < IRMAX where IRMAX = 15 mA
See Electrical Characteristics: 2-V LM4040-N VR Tolerance Grades 'A' And 'B'; Temperature Grade 'I'
for minimum operating current for each voltage option and grade.
9.2.1.2 Detailed Design Procedure
The resistor RS must be selected such that current IR will remain in the operational region of the part for the
entire VIN range and load current range. The two extremes to consider are VIN at its minimum, and the load at its
maximum, where RS must be small enough for IR to remain above IRMIN. The other extreme is VIN at its
maximum, and the load at its minimum, where RS must be large enough to maintain IR < IRMAX. For most
designs, 0.1 mA ≤ IR ≤ 1 mA is a good starting point.
Use Equation 2 and Equation 3 to set RS between RS_MIN and RS_MAX
.
V
- VOUT
IN_MAX
RS_MIN
=
I
LOAD_MIN + IR _MAX
IN_MIN - VOUT
ILOAD_MAX + IR _MIN
(2)
(3)
V
RS_MAX
=
9.2.1.3 Application Curve
Figure 11. Reverse Characteristics And Minimum Operating Current
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
35
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Typical Applications (continued)
9.2.2 4.1-V ADC Application
**Ceramic monolithic
*Tantalum
Figure 12. 4.1-V LM4040-N'S Nominal 4.096 Breakdown Voltage Gives ADC12451 1 MV/LSB
9.2.2.1 Design Requirements
The only design requirement is for an output voltage of 4.096 V.
9.2.2.2 Detailed Design Procedure
Using an LM4040-4.1, select an appropriate RS to sufficiently power the device. Set the target IR for 1 mA. With
an input voltage of 5 V, the resistor can be calculated:
5 V - 4.096 V
R =
= 904 W
1mA
(4)
The closest available resistance of 909 Ω is used here, which in turn yields an IR of 994 μA.
36
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Typical Applications (continued)
9.2.3 Bounded Amplifier
Nominal clamping voltage is ±11.5 V (LM4040-N's reverse breakdown voltage +2 diode VF).
Figure 13. Bounded Amplifier Reduces Saturation-Induced Delays and
Can Prevent Succeeding Stage Damage
9.2.3.1 Design Requirements
Design an amplifier with output clamped at ±11.5 V.
9.2.3.2 Detailed Design Procedure
With amplifier rails of ±15 V, the output can be bound to ±11.5 V with the LM4040-10 and two nominal diode
voltage drops of 0.7 V.
VOUTBound = 2 × VFWD + VZ
VOUTBound = 1.4 V + 10 V
(5)
(6)
Select RS = 15 kΩ to keep IR low. Calculate IR to confirm RS selection.
IR = (VIN – VOUT) / R, however in this case, the negative supply must be taken into account.
IR = (VIN+ – VIN- – VOUT)/R = (30 V – 10 V) / (RS1+RS2) = 20 V / 30 kΩ = 0.667 mA
(7)
(8)
This is an acceptable value for IR that will not draw excessive current, but prevents the part from being starved
for current.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
37
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Typical Applications (continued)
9.2.4 Protecting Op-Amp Input
The bounding voltage is ±4 V with the 2.5-V LM4040-N (LM4040-N's reverse breakdown voltage + 3 diode VF).
Figure 14. Protecting Op Amp Input
9.2.4.1 Design Requirements
Limit the input voltage to the op-amp to ±4 V.
9.2.4.2 Detailed Design Procedure
Similar to Bounded Amplifier, this design uses a LM4040-2.5 and three forward diode voltage drops to create a
voltage clamp. The procedure for selecting the RS resistors, in this case 5 kΩ, is the same as Detailed Design
Procedure.
IR = (VIN+ – VIN- – VOUT) / R = (10 V – 2.5 V) / (RS1 + RS2) = 7.5 V / 10 kΩ = 0.750 mA
(9)
38
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
Typical Applications (continued)
9.2.5 Precision ±4.096-V Reference
Figure 15. Precision ±4.096-V Reference
9.2.5.1 Design Requirements
Use a single voltage reference to create positive and negative reference rails, ±4.096 V.
9.2.5.2 Detailed Design Procedure
The procedure for selecting the RS resistor is same as detailed in Detailed Design Procedure. The output of the
voltage reference is used as the inverting input to the op-amp, with unity gain.
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
39
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
Typical Applications (continued)
9.2.6 Precision Current Sink/Source
Figure 16. Precision 1-mA Current Sink
Figure 17. Precision 1-mA Current Source
9.2.6.1 Design Requirements
Create precision 1-mA current sink and/or 1-mA current source.
9.2.6.2 Detailed Design Procedure
Set R1 such that the current through the shunt reference, IR, is greater than IRMIN
.
IOUT = VOUT / R2 where VOUT is the voltage drop across the shunt reference. In this case,
IOUT = 2.5 / R2
40
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
10 Power Supply Recommendations
While a bypass capacitor is not required on the input voltage line, TI recommends reducing noise on the input
which could affect the output. A 0.1-µF ceramic capacitor or larger is recommended.
11 Layout
11.1 Layout Guidelines
Place external components as close to the device as possible. Place RS close the cathode, as well as the input
bypass capacitor, if used.
11.2 Layout Example
RS physically close to device cathode
RS
CIN
COUT
CIN physically
COUT physically
Figure 18. Layout Diagram
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
41
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
www.ti.com
12 Device and Documentation Support
12.1 Documentation Support
12.1.1 Related Documentation
For related documentation, see the following:
LM4041-N/LM4041-N-Q1 Precision Micropower Shunt Voltage Reference, SNOS641
12.2 Related Links
The table below lists quick access links. Categories include technical documents, support and community
resources, tools and software, and quick access to sample or buy.
Table 1. Related Links
TECHNICAL
DOCUMENTS
TOOLS &
SOFTWARE
SUPPORT &
COMMUNITY
PARTS
PRODUCT FOLDER
SAMPLE & BUY
LM4040-N
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
Click here
LM4040-N-Q1
LM4040-N-Q1
12.3 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
solve problems with fellow engineers.
Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and
contact information for technical support.
12.4 Trademarks
E2E is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
12.5 Electrostatic Discharge Caution
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
12.6 Glossary
SLYZ022 — TI Glossary.
This glossary lists and explains terms, acronyms, and definitions.
13 Mechanical, Packaging, And Orderable Information
The following pages include mechanical, packaging, and orderable information. This information is the most
current data available for the designated devices. This data is subject to change without notice and revision of
this document. For browser-based versions of this data sheet, refer to the left-hand navigation.
13.1 SOT-23 and SC70 Package Marking Information
Only three fields of marking are possible on the SOT-23's and SC70's small surface. This table gives the
meaning of the three fields.
First Field:
42
Submit Documentation Feedback
Copyright © 2000–2016, Texas Instruments Incorporated
Product Folder Links: LM4040-N LM4040-N-Q1
LM4040-N, LM4040-N-Q1
www.ti.com
SNOS633K –OCTOBER 2000–REVISED JUNE 2016
SOT-23 and SC70 Package Marking Information (continued)
R = Reference
Second Field: Voltage Option
J = 2.048-V Voltage Option
2 = 2.5-V Voltage Option
K = 3-V Voltage Option
4 = 4.096-V Voltage Option
5 = 5-V Voltage Option
8 = 8.192-V Voltage Option
0 = 10-V Voltage Option
Third Field: Initial Reverse Breakdown Voltage or Reference Voltage Tolerance
A = ±0.1%
B = ±0.2%
C = +0.5%
D = ±1.0%
E = ±2.0%
PART MARKING
FIELD DEFINITION
Reference, 2.048 V, ±0.1%
Reference, 2.5 V, ±0.1%
Reference, 3 V, ±0.1%
Reference, 4.096 V, ±0.1%
Reference, 5 V, ±0.1%
Reference, 8.192 V, ±0.1%
Reference, 10 V, ±0.1%
Reference, 2.048 V, ±0.2%
Reference, 2.5 V, ±0.2%
Reference, 3 V, ±0.2%
Reference, 4.096 V, ±0.2%
Reference, 5 V, ±0.2%
Reference, 8.192 V, ±0.2%
Reference, 10 V, ±0.2%
Reference, 2.048 V, ±0.5%
Reference, 2.5 V, ±0.5%
Reference, 3 V, ±0.5%
Reference, 4.096 V, ±0.5%
Reference, 5 V, ±0.5%
Reference, 8.192 V, ±0.5%
Reference, 10 V, ±0.5%
Reference, 2.048 V, ±1.0%
Reference, 2.5 V, ±1.0%
Reference, 3 V, ±1.0%
Reference, 4.096 V, ±1.0%
Reference, 5 V, ±1.0%
Reference, 8.192 V, ±1.0%
Reference, 10 V, ±1.0%
Reference, 2.048 V, ±2.0%
Reference, 2.5 V, ±2.0%
Reference, 3 V, ±2.0%
RJA (SOT-23 only)
R2A (SOT-23 only)
RKA (SOT-23 only)
R4A (SOT-23 only)
R5A (SOT-23 only)
R8A (SOT-23 only)
R0A (SOT-23 only)
RJB
R2B
RKB
R4B
R5B
R8B (SOT-23 only)
R0B (SOT-23 only)
RJC
R2C
RKC
R4C
R5C
R8C (SOT-23 only)
R0C (SOT-23 only)
RJD
R2D
RKD
R4D
R5D
R8D (SOT-23 only)
R0D (SOT-23 only)
RJE
R2E
RKE
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
43
Product Folder Links: LM4040-N LM4040-N-Q1
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
1000
1000
(1)
(2)
(6)
(3)
(4/5)
LM4040AIM3-10.0
NRND
ACTIVE
SOT-23
SOT-23
DBZ
3
3
TBD
Call TI
CU SN
Call TI
R0A
R0A
LM4040AIM3-10.0/NOPB
DBZ
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040AIM3-2.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
RJA
RJA
LM4040AIM3-2.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040AIM3-2.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R2A
R2A
LM4040AIM3-2.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040AIM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKA
LM4040AIM3-4.1
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R4A
R4A
LM4040AIM3-4.1/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040AIM3-5.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R5A
R5A
LM4040AIM3-5.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040AIM3X-10
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R0A
R0A
LM4040AIM3X-10/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040AIM3X-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJA
LM4040AIM3X-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R2A
R2A
LM4040AIM3X-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040AIM3X-3.0/NOPB
LM4040AIM3X-4.1/NOPB
ACTIVE
ACTIVE
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
RKA
R4A
Green (RoHS
& no Sb/Br)
LM4040AIM3X-5.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R5A
R5A
LM4040AIM3X-5.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
LM4040AIZ-10.0/NOPB
LM4040AIZ-2.5/NOPB
LM4040AIZ-4.1/NOPB
LM4040AIZ-5.0/NOPB
ACTIVE
TO-92
TO-92
TO-92
TO-92
LP
3
3
3
3
1800
Green (RoHS
& no Sb/Br)
CU SN
CU SN
CU SN
CU SN
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
4040A
IZ10
ACTIVE
ACTIVE
ACTIVE
LP
LP
LP
1800
1800
1800
Green (RoHS
& no Sb/Br)
4040A
IZ2.5
Green (RoHS
& no Sb/Br)
4040A
IZ4.1
Green (RoHS
& no Sb/Br)
4040A
IZ5.0
LM4040BIM3-10.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R0B
R0B
LM4040BIM3-10.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040BIM3-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJB
LM4040BIM3-2.5
ACTIVE
ACTIVE
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R2B
R2B
LM4040BIM3-2.5/NOPB
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040BIM3-3.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
RKB
RKB
LM4040BIM3-3.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040BIM3-4.1
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R4B
R4B
LM4040BIM3-4.1/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040BIM3-5.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R5B
R5B
LM4040BIM3-5.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040BIM3-8.2
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R8B
R8B
LM4040BIM3-8.2/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040BIM3X-10/NOPB
LM4040BIM3X-2.0/NOPB
ACTIVE
ACTIVE
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
R0B
RJB
Green (RoHS
& no Sb/Br)
LM4040BIM3X-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R2B
R2B
LM4040BIM3X-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
LM4040BIM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKB
LM4040BIM3X-4.1
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R4B
R4B
LM4040BIM3X-4.1/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040BIM3X-5.0/NOPB
LM4040BIM7-2.0/NOPB
ACTIVE
ACTIVE
SOT-23
SC70
DBZ
DCK
3
5
3000
1000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
R5B
RJB
Green (RoHS
& no Sb/Br)
LM4040BIM7-2.5
NRND
SC70
SC70
DCK
DCK
5
5
1000
1000
TBD
Call TI
CU SN
Call TI
R2B
R2B
LM4040BIM7-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040BIM7-5.0/NOPB
LM4040BIM7X-2.5/NOPB
LM4040BIZ-10.0/NOPB
LM4040BIZ-2.5/NOPB
LM4040BIZ-4.1/NOPB
LM4040BIZ-5.0/NOPB
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SC70
SC70
TO-92
TO-92
TO-92
TO-92
DCK
DCK
LP
5
5
3
3
3
3
1000
3000
1800
1800
1800
1800
Green (RoHS
& no Sb/Br)
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
R5B
R2B
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
4040B
IZ10
LP
Green (RoHS
& no Sb/Br)
4040B
IZ2.5
LP
Green (RoHS
& no Sb/Br)
4040B
IZ4.1
LP
Green (RoHS
& no Sb/Br)
4040B
IZ5.0
LM4040CEM3-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R2C
R2C
LM4040CEM3-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CEM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKC
LM4040CEM3-5.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R5C
R5C
LM4040CEM3-5.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CEM3X-3.0/NOPB
LM4040CEM3X-5.0/NOPB
ACTIVE
ACTIVE
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
RKC
R5C
Green (RoHS
& no Sb/Br)
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
1000
1000
(1)
(2)
(6)
(3)
(4/5)
LM4040CIM3-10.0
NRND
ACTIVE
SOT-23
SOT-23
DBZ
3
3
TBD
Call TI
CU SN
Call TI
R0C
R0C
LM4040CIM3-10.0/NOPB
DBZ
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3-2.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
RJC
RJC
LM4040CIM3-2.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R2C
R2C
LM4040CIM3-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3-3.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
RKC
RKC
LM4040CIM3-3.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3-4.1
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R4C
R4C
LM4040CIM3-4.1/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3-5.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R5C
R5C
LM4040CIM3-5.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3-8.2
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R8C
R8C
LM4040CIM3-8.2/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3X-10
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
TBD
Call TI
CU SN
Call TI
R0C
R0C
LM4040CIM3X-10/NOPB
ACTIVE
3000
3000
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3X-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJC
LM4040CIM3X-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R2C
R2C
LM4040CIM3X-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKC
LM4040CIM3X-4.1
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
TBD
Call TI
CU SN
Call TI
R4C
R4C
LM4040CIM3X-4.1/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
3000
3000
(1)
(2)
(6)
(3)
(4/5)
LM4040CIM3X-5.0
NRND
ACTIVE
SOT-23
SOT-23
DBZ
3
3
TBD
Call TI
CU SN
Call TI
R5C
R5C
LM4040CIM3X-5.0/NOPB
DBZ
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040CIM7-2.0/NOPB
LM4040CIM7-2.5/NOPB
LM4040CIM7X-2.5/NOPB
LM4040CIZ-10.0/NOPB
LM4040CIZ-2.5/LFT8
LM4040CIZ-2.5/NOPB
LM4040CIZ-4.1/NOPB
LM4040CIZ-5.0/NOPB
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SC70
SC70
SC70
TO-92
TO-92
TO-92
TO-92
TO-92
DCK
DCK
DCK
LP
5
5
5
3
3
3
3
3
1000
1000
3000
1800
2000
1800
1800
1800
Green (RoHS
& no Sb/Br)
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
RJC
R2C
R2C
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
4040C
IZ10
LP
Green (RoHS
& no Sb/Br)
4040C
IZ2.5
LP
Green (RoHS
& no Sb/Br)
4040C
IZ2.5
LP
Green (RoHS
& no Sb/Br)
4040C
IZ4.1
LP
Green (RoHS
& no Sb/Br)
4040C
IZ5.0
LM4040DEM3-2.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
RJD
RJD
LM4040DEM3-2.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DEM3-2.5/NOPB
LM4040DEM3-3.0/NOPB
ACTIVE
ACTIVE
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
R2D
RKD
Green (RoHS
& no Sb/Br)
LM4040DEM3-5.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R5D
R5D
LM4040DEM3-5.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DEM3X-2.5/NOPB
LM4040DEM3X-5.0/NOPB
ACTIVE
ACTIVE
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
R2D
R5D
Green (RoHS
& no Sb/Br)
LM4040DIM3-10.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R0D
R0D
LM4040DIM3-10.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Addendum-Page 5
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
LM4040DIM3-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJD
LM4040DIM3-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R2D
R2D
LM4040DIM3-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DIM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKD
LM4040DIM3-4.1
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R4D
R4D
LM4040DIM3-4.1/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DIM3-5.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R5D
R5D
LM4040DIM3-5.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DIM3-8.2/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
R8D
LM4040DIM3X-10
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
TBD
Call TI
CU SN
Call TI
R0D
R0D
LM4040DIM3X-10/NOPB
ACTIVE
3000
3000
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DIM3X-2.0/NOPB
ACTIVE
SOT-23
DBZ
3
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RJD
LM4040DIM3X-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R2D
R2D
LM4040DIM3X-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DIM3X-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
3000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKD
LM4040DIM3X-4.1
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R4D
R4D
LM4040DIM3X-4.1/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DIM3X-5.0
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R5D
R5D
LM4040DIM3X-5.0/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DIM7-2.0/NOPB
LM4040DIM7-2.5/NOPB
ACTIVE
ACTIVE
SC70
SC70
DCK
DCK
5
5
1000
1000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
RJD
R2D
Green (RoHS
& no Sb/Br)
Addendum-Page 6
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
1000
1000
(1)
(2)
(6)
(3)
(4/5)
LM4040DIM7-5.0
NRND
ACTIVE
SC70
SC70
DCK
5
5
TBD
Call TI
CU SN
Call TI
R5D
R5D
LM4040DIM7-5.0/NOPB
DCK
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040DIZ-10.0/NOPB
LM4040DIZ-2.5/NOPB
LM4040DIZ-4.1/NOPB
LM4040DIZ-5.0/LFT1
LM4040DIZ-5.0/NOPB
LM4040EEM3-2.5/NOPB
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
TO-92
TO-92
TO-92
TO-92
TO-92
SOT-23
LP
LP
3
3
3
3
3
3
1800
1800
1800
2000
1800
1000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
Level-1-260C-UNLIM
4040D
IZ10
Green (RoHS
& no Sb/Br)
4040D
IZ2.5
LP
Green (RoHS
& no Sb/Br)
4040D
IZ4.1
LP
Green (RoHS
& no Sb/Br)
4040D
IZ5.0
LP
Green (RoHS
& no Sb/Br)
4040D
IZ5.0
DBZ
Green (RoHS
& no Sb/Br)
R2E
LM4040EIM3-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
1000
1000
TBD
Call TI
CU SN
Call TI
R2E
R2E
LM4040EIM3-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040EIM3-3.0/NOPB
ACTIVE
SOT-23
DBZ
3
1000
Green (RoHS
& no Sb/Br)
CU SN
Level-1-260C-UNLIM
RKE
LM4040EIM3X-2.5
NRND
SOT-23
SOT-23
DBZ
DBZ
3
3
3000
3000
TBD
Call TI
CU SN
Call TI
R2E
R2E
LM4040EIM3X-2.5/NOPB
ACTIVE
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
LM4040EIM3X-3.0/NOPB
LM4040EIM7-2.0/NOPB
LM4040QAIM3-2.5/NOPB
LM4040QAIM3X2.5/NOPB
LM4040QBIM3-2.5/NOPB
LM4040QBIM3X2.5/NOPB
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOT-23
SC70
DBZ
DCK
DBZ
DBZ
DBZ
DBZ
3
5
3
3
3
3
3000
1000
1000
3000
1000
3000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
RKE
RJE
R6A
R6A
R6B
R6B
Green (RoHS
& no Sb/Br)
SOT-23
SOT-23
SOT-23
SOT-23
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Addendum-Page 7
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
Orderable Device
Status Package Type Package Pins Package
Eco Plan
Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(6)
(3)
(4/5)
LM4040QCEM3-2.5/NOPB
LM4040QCEM3-3.0/NOPB
LM4040QCIM3-2.5/NOPB
LM4040QCIM3X2.5/NOPB
LM4040QDEM3-2.5/NOPB
LM4040QDEM3-3.0/NOPB
LM4040QDIM3-2.5/NOPB
LM4040QDIM3X2.5/NOPB
LM4040QEEM3-2.5/NOPB
LM4040QEEM3-3.0/NOPB
LM4040QEIM3-2.5/NOPB
LM4040QEIM3X2.5/NOPB
ACTIVE
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
DBZ
3
3
3
3
3
3
3
3
3
3
3
3
1000
Green (RoHS
& no Sb/Br)
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
R2C
R3C
R6C
R6C
R2D
R3D
R6D
R6D
R2E
R3E
R6E
R6E
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
1000
1000
3000
1000
1000
1000
3000
1000
1000
1000
3000
Green (RoHS
& no Sb/Br)
-40 to 125
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
-40 to 125
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
-40 to 125
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
Addendum-Page 8
PACKAGE OPTION ADDENDUM
www.ti.com
23-Aug-2017
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LM4040-N, LM4040-N-Q1 :
Catalog: LM4040-N
•
Automotive: LM4040-N-Q1
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
•
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
•
Addendum-Page 9
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Aug-2017
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM4040AIM3-10.0
SOT-23
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
LM4040AIM3-10.0/NOPB SOT-23
LM4040AIM3-2.0 SOT-23
LM4040AIM3-2.0/NOPB SOT-23
LM4040AIM3-2.5 SOT-23
LM4040AIM3-2.5/NOPB SOT-23
LM4040AIM3-3.0/NOPB SOT-23
LM4040AIM3-4.1
LM4040AIM3-4.1/NOPB SOT-23
LM4040AIM3-5.0 SOT-23
LM4040AIM3-5.0/NOPB SOT-23
LM4040AIM3X-10 SOT-23
SOT-23
LM4040AIM3X-10/NOPB SOT-23
LM4040AIM3X-2.0/NOPB SOT-23
LM4040AIM3X-2.5
SOT-23
LM4040AIM3X-2.5/NOPB SOT-23
LM4040AIM3X-3.0/NOPB SOT-23
LM4040AIM3X-4.1/NOPB SOT-23
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Aug-2017
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM4040AIM3X-5.0
LM4040AIM3X-5.0/NOPB SOT-23
LM4040BIM3-10.0 SOT-23
SOT-23
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DCK
DCK
DCK
DCK
DCK
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3000
3000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
1000
1000
1000
1000
3000
1000
1000
1000
1000
1000
3000
3000
1000
1000
1000
1000
1000
1000
1000
1000
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.25
2.25
2.25
2.25
2.25
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.45
2.45
2.45
2.45
2.45
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
LM4040BIM3-10.0/NOPB SOT-23
LM4040BIM3-2.0/NOPB SOT-23
LM4040BIM3-2.5
LM4040BIM3-2.5/NOPB SOT-23
LM4040BIM3-3.0 SOT-23
LM4040BIM3-3.0/NOPB SOT-23
LM4040BIM3-4.1 SOT-23
LM4040BIM3-4.1/NOPB SOT-23
LM4040BIM3-5.0 SOT-23
LM4040BIM3-5.0/NOPB SOT-23
LM4040BIM3-8.2 SOT-23
SOT-23
LM4040BIM3-8.2/NOPB SOT-23
LM4040BIM3X-10/NOPB SOT-23
LM4040BIM3X-2.0/NOPB SOT-23
LM4040BIM3X-2.5
SOT-23
LM4040BIM3X-2.5/NOPB SOT-23
LM4040BIM3X-3.0/NOPB SOT-23
LM4040BIM3X-4.1
SOT-23
LM4040BIM3X-4.1/NOPB SOT-23
LM4040BIM3X-5.0/NOPB SOT-23
LM4040BIM7-2.0/NOPB
LM4040BIM7-2.5
SC70
SC70
SC70
SC70
1.2
LM4040BIM7-2.5/NOPB
LM4040BIM7-5.0/NOPB
1.2
1.2
LM4040BIM7X-2.5/NOPB SC70
LM4040CEM3-2.5 SOT-23
1.2
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
LM4040CEM3-2.5/NOPB SOT-23
LM4040CEM3-3.0/NOPB SOT-23
LM4040CEM3-5.0
SOT-23
LM4040CEM3-5.0/NOPB SOT-23
LM4040CEM3X-3.0/NOPB SOT-23
LM4040CEM3X-5.0/NOPB SOT-23
LM4040CIM3-10.0
LM4040CIM3-10.0/NOPB SOT-23
LM4040CIM3-2.0 SOT-23
LM4040CIM3-2.0/NOPB SOT-23
LM4040CIM3-2.5 SOT-23
LM4040CIM3-2.5/NOPB SOT-23
LM4040CIM3-3.0 SOT-23
LM4040CIM3-3.0/NOPB SOT-23
SOT-23
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Aug-2017
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM4040CIM3-4.1
LM4040CIM3-4.1/NOPB SOT-23
LM4040CIM3-5.0 SOT-23
LM4040CIM3-5.0/NOPB SOT-23
LM4040CIM3-8.2 SOT-23
SOT-23
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DCK
DCK
DCK
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
1000
1000
3000
1000
1000
1000
1000
1000
1000
3000
3000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.25
2.25
2.25
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
3.3
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.45
2.45
2.45
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
2.9
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
LM4040CIM3-8.2/NOPB SOT-23
LM4040CIM3X-10/NOPB SOT-23
LM4040CIM3X-2.0/NOPB SOT-23
LM4040CIM3X-2.5
SOT-23
LM4040CIM3X-2.5/NOPB SOT-23
LM4040CIM3X-3.0/NOPB SOT-23
LM4040CIM3X-4.1/NOPB SOT-23
LM4040CIM3X-5.0
SOT-23
LM4040CIM3X-5.0/NOPB SOT-23
LM4040CIM7-2.0/NOPB
LM4040CIM7-2.5/NOPB
SC70
SC70
1.2
LM4040CIM7X-2.5/NOPB SC70
LM4040DEM3-2.0 SOT-23
1.2
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.22
LM4040DEM3-2.0/NOPB SOT-23
LM4040DEM3-2.5/NOPB SOT-23
LM4040DEM3-3.0/NOPB SOT-23
LM4040DEM3-5.0
SOT-23
LM4040DEM3-5.0/NOPB SOT-23
LM4040DEM3X-2.5/NOPB SOT-23
LM4040DEM3X-5.0/NOPB SOT-23
LM4040DIM3-10.0
SOT-23
LM4040DIM3-10.0/NOPB SOT-23
LM4040DIM3-2.0/NOPB SOT-23
LM4040DIM3-2.5
SOT-23
LM4040DIM3-2.5/NOPB SOT-23
LM4040DIM3-3.0/NOPB SOT-23
LM4040DIM3-4.1
LM4040DIM3-4.1/NOPB SOT-23
LM4040DIM3-5.0 SOT-23
SOT-23
LM4040DIM3-5.0/NOPB SOT-23
LM4040DIM3-8.2/NOPB SOT-23
LM4040DIM3X-10/NOPB SOT-23
LM4040DIM3X-2.0/NOPB SOT-23
LM4040DIM3X-2.5
SOT-23
LM4040DIM3X-2.5/NOPB SOT-23
LM4040DIM3X-3.0/NOPB SOT-23
LM4040DIM3X-4.1
SOT-23
LM4040DIM3X-4.1/NOPB SOT-23
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Aug-2017
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM4040DIM3X-5.0
SOT-23
DBZ
DBZ
DCK
DCK
DCK
DCK
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DCK
DBZ
DBZ
DBZ
DBZ
DBZ
3
3
5
5
5
5
3
3
3
3
3
3
3
5
3
3
3
3
3
3000
3000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
1000
1000
3000
1000
3000
1000
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
178.0
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
8.4
3.3
3.3
2.9
2.9
1.22
1.22
1.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
Q3
LM4040DIM3X-5.0/NOPB SOT-23
LM4040DIM7-2.0/NOPB
LM4040DIM7-2.5/NOPB
LM4040DIM7-5.0
SC70
SC70
SC70
SC70
2.25
2.25
2.25
2.25
3.3
2.45
2.45
2.45
2.45
2.9
1.2
1.2
LM4040DIM7-5.0/NOPB
1.2
LM4040EEM3-2.5/NOPB SOT-23
LM4040EIM3-2.5 SOT-23
1.22
1.22
1.22
1.22
1.22
1.22
1.22
1.2
3.3
2.9
LM4040EIM3-2.5/NOPB SOT-23
LM4040EIM3-3.0/NOPB SOT-23
3.3
2.9
3.3
2.9
LM4040EIM3X-2.5
SOT-23
3.3
2.9
LM4040EIM3X-2.5/NOPB SOT-23
LM4040EIM3X-3.0/NOPB SOT-23
3.3
2.9
3.3
2.9
LM4040EIM7-2.0/NOPB
SC70
2.25
3.3
2.45
2.9
LM4040QAIM3-2.5/NOPB SOT-23
LM4040QAIM3X2.5/NOPB SOT-23
LM4040QBIM3-2.5/NOPB SOT-23
LM4040QBIM3X2.5/NOPB SOT-23
1.22
1.22
1.22
1.22
1.22
3.3
2.9
3.3
2.9
3.3
2.9
LM4040QCEM3-2.5/NOP SOT-23
B
3.3
2.9
LM4040QCEM3-3.0/NOP SOT-23
B
DBZ
3
1000
178.0
8.4
3.3
2.9
1.22
4.0
8.0
Q3
LM4040QCIM3-2.5/NOPB SOT-23
DBZ
DBZ
3
3
1000
3000
178.0
178.0
8.4
8.4
3.3
3.3
2.9
2.9
1.22
1.22
4.0
4.0
8.0
8.0
Q3
Q3
LM4040QCIM3X2.5/NOP SOT-23
B
LM4040QDEM3-2.5/NOP SOT-23
B
DBZ
DBZ
3
3
1000
1000
178.0
178.0
8.4
8.4
3.3
3.3
2.9
2.9
1.22
1.22
4.0
4.0
8.0
8.0
Q3
Q3
LM4040QDEM3-3.0/NOP SOT-23
B
LM4040QDIM3-2.5/NOPB SOT-23
DBZ
DBZ
3
3
1000
3000
178.0
178.0
8.4
8.4
3.3
3.3
2.9
2.9
1.22
1.22
4.0
4.0
8.0
8.0
Q3
Q3
LM4040QDIM3X2.5/NOP SOT-23
B
LM4040QEEM3-2.5/NOP SOT-23
B
DBZ
DBZ
3
3
1000
1000
178.0
178.0
8.4
8.4
3.3
3.3
2.9
2.9
1.22
1.22
4.0
4.0
8.0
8.0
Q3
Q3
LM4040QEEM3-3.0/NOP SOT-23
B
LM4040QEIM3-2.5/NOPB SOT-23
LM4040QEIM3X2.5/NOPB SOT-23
DBZ
DBZ
3
3
1000
3000
178.0
178.0
8.4
8.4
3.3
3.3
2.9
2.9
1.22
1.22
4.0
4.0
8.0
8.0
Q3
Q3
Pack Materials-Page 4
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Aug-2017
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LM4040AIM3-10.0
LM4040AIM3-10.0/NOPB
LM4040AIM3-2.0
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
3000
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
LM4040AIM3-2.0/NOPB
LM4040AIM3-2.5
LM4040AIM3-2.5/NOPB
LM4040AIM3-3.0/NOPB
LM4040AIM3-4.1
LM4040AIM3-4.1/NOPB
LM4040AIM3-5.0
LM4040AIM3-5.0/NOPB
LM4040AIM3X-10
LM4040AIM3X-10/NOPB
LM4040AIM3X-2.0/NOPB
LM4040AIM3X-2.5
LM4040AIM3X-2.5/NOPB
LM4040AIM3X-3.0/NOPB
LM4040AIM3X-4.1/NOPB
LM4040AIM3X-5.0
LM4040AIM3X-5.0/NOPB
Pack Materials-Page 5
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Aug-2017
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LM4040BIM3-10.0
LM4040BIM3-10.0/NOPB
LM4040BIM3-2.0/NOPB
LM4040BIM3-2.5
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SC70
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DCK
DCK
DCK
DCK
DCK
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
5
5
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
1000
1000
1000
1000
3000
1000
1000
1000
1000
1000
3000
3000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
LM4040BIM3-2.5/NOPB
LM4040BIM3-3.0
LM4040BIM3-3.0/NOPB
LM4040BIM3-4.1
LM4040BIM3-4.1/NOPB
LM4040BIM3-5.0
LM4040BIM3-5.0/NOPB
LM4040BIM3-8.2
LM4040BIM3-8.2/NOPB
LM4040BIM3X-10/NOPB
LM4040BIM3X-2.0/NOPB
LM4040BIM3X-2.5
LM4040BIM3X-2.5/NOPB
LM4040BIM3X-3.0/NOPB
LM4040BIM3X-4.1
LM4040BIM3X-4.1/NOPB
LM4040BIM3X-5.0/NOPB
LM4040BIM7-2.0/NOPB
LM4040BIM7-2.5
SC70
LM4040BIM7-2.5/NOPB
LM4040BIM7-5.0/NOPB
LM4040BIM7X-2.5/NOPB
LM4040CEM3-2.5
SC70
SC70
SC70
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
LM4040CEM3-2.5/NOPB
LM4040CEM3-3.0/NOPB
LM4040CEM3-5.0
LM4040CEM3-5.0/NOPB
LM4040CEM3X-3.0/NOPB
LM4040CEM3X-5.0/NOPB
LM4040CIM3-10.0
LM4040CIM3-10.0/NOPB
LM4040CIM3-2.0
LM4040CIM3-2.0/NOPB
LM4040CIM3-2.5
LM4040CIM3-2.5/NOPB
LM4040CIM3-3.0
LM4040CIM3-3.0/NOPB
LM4040CIM3-4.1
LM4040CIM3-4.1/NOPB
LM4040CIM3-5.0
Pack Materials-Page 6
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Aug-2017
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LM4040CIM3-5.0/NOPB
LM4040CIM3-8.2
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SC70
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DCK
DCK
DCK
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DCK
DCK
3
3
3
3
3
3
3
3
3
3
3
5
5
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
5
5
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
1000
1000
3000
1000
1000
1000
1000
1000
1000
3000
3000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3000
3000
3000
3000
3000
3000
3000
3000
3000
1000
1000
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
LM4040CIM3-8.2/NOPB
LM4040CIM3X-10/NOPB
LM4040CIM3X-2.0/NOPB
LM4040CIM3X-2.5
LM4040CIM3X-2.5/NOPB
LM4040CIM3X-3.0/NOPB
LM4040CIM3X-4.1/NOPB
LM4040CIM3X-5.0
LM4040CIM3X-5.0/NOPB
LM4040CIM7-2.0/NOPB
LM4040CIM7-2.5/NOPB
LM4040CIM7X-2.5/NOPB
LM4040DEM3-2.0
SC70
SC70
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SC70
LM4040DEM3-2.0/NOPB
LM4040DEM3-2.5/NOPB
LM4040DEM3-3.0/NOPB
LM4040DEM3-5.0
LM4040DEM3-5.0/NOPB
LM4040DEM3X-2.5/NOPB
LM4040DEM3X-5.0/NOPB
LM4040DIM3-10.0
LM4040DIM3-10.0/NOPB
LM4040DIM3-2.0/NOPB
LM4040DIM3-2.5
LM4040DIM3-2.5/NOPB
LM4040DIM3-3.0/NOPB
LM4040DIM3-4.1
LM4040DIM3-4.1/NOPB
LM4040DIM3-5.0
LM4040DIM3-5.0/NOPB
LM4040DIM3-8.2/NOPB
LM4040DIM3X-10/NOPB
LM4040DIM3X-2.0/NOPB
LM4040DIM3X-2.5
LM4040DIM3X-2.5/NOPB
LM4040DIM3X-3.0/NOPB
LM4040DIM3X-4.1
LM4040DIM3X-4.1/NOPB
LM4040DIM3X-5.0
LM4040DIM3X-5.0/NOPB
LM4040DIM7-2.0/NOPB
LM4040DIM7-2.5/NOPB
SC70
Pack Materials-Page 7
PACKAGE MATERIALS INFORMATION
www.ti.com
24-Aug-2017
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LM4040DIM7-5.0
SC70
DCK
DCK
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DCK
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
DBZ
5
5
3
3
3
3
3
3
3
5
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1000
1000
1000
1000
1000
1000
3000
3000
3000
1000
1000
3000
1000
3000
1000
1000
1000
3000
1000
1000
1000
3000
1000
1000
1000
3000
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
210.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
185.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
35.0
LM4040DIM7-5.0/NOPB
LM4040EEM3-2.5/NOPB
LM4040EIM3-2.5
SC70
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SC70
LM4040EIM3-2.5/NOPB
LM4040EIM3-3.0/NOPB
LM4040EIM3X-2.5
LM4040EIM3X-2.5/NOPB
LM4040EIM3X-3.0/NOPB
LM4040EIM7-2.0/NOPB
LM4040QAIM3-2.5/NOPB
LM4040QAIM3X2.5/NOPB
LM4040QBIM3-2.5/NOPB
LM4040QBIM3X2.5/NOPB
LM4040QCEM3-2.5/NOPB
LM4040QCEM3-3.0/NOPB
LM4040QCIM3-2.5/NOPB
LM4040QCIM3X2.5/NOPB
LM4040QDEM3-2.5/NOPB
LM4040QDEM3-3.0/NOPB
LM4040QDIM3-2.5/NOPB
LM4040QDIM3X2.5/NOPB
LM4040QEEM3-2.5/NOPB
LM4040QEEM3-3.0/NOPB
LM4040QEIM3-2.5/NOPB
LM4040QEIM3X2.5/NOPB
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
SOT-23
Pack Materials-Page 8
4203227/C
PACKAGE OUTLINE
DBZ0003A
SOT-23 - 1.12 mm max height
S
C
A
L
E
4
.
0
0
0
SMALL OUTLINE TRANSISTOR
C
2.64
2.10
1.12 MAX
1.4
1.2
B
A
0.1 C
PIN 1
INDEX AREA
1
0.95
3.04
2.80
1.9
3
2
0.5
0.3
3X
0.10
0.01
(0.95)
TYP
0.2
C A B
0.25
GAGE PLANE
0.20
0.08
TYP
0.6
0.2
TYP
SEATING PLANE
0 -8 TYP
4214838/C 04/2017
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Reference JEDEC registration TO-236, except minimum foot length.
www.ti.com
EXAMPLE BOARD LAYOUT
DBZ0003A
SOT-23 - 1.12 mm max height
SMALL OUTLINE TRANSISTOR
PKG
3X (1.3)
1
3X (0.6)
SYMM
3
2X (0.95)
2
(R0.05) TYP
(2.1)
LAND PATTERN EXAMPLE
SCALE:15X
SOLDER MASK
OPENING
SOLDER MASK
OPENING
METAL UNDER
SOLDER MASK
METAL
0.07 MIN
ALL AROUND
0.07 MAX
ALL AROUND
NON SOLDER MASK
DEFINED
SOLDER MASK
DEFINED
(PREFERRED)
SOLDER MASK DETAILS
4214838/C 04/2017
NOTES: (continued)
4. Publication IPC-7351 may have alternate designs.
5. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
www.ti.com
EXAMPLE STENCIL DESIGN
DBZ0003A
SOT-23 - 1.12 mm max height
SMALL OUTLINE TRANSISTOR
PKG
3X (1.3)
1
3X (0.6)
SYMM
3
2X(0.95)
2
(R0.05) TYP
(2.1)
SOLDER PASTE EXAMPLE
BASED ON 0.125 THICK STENCIL
SCALE:15X
4214838/C 04/2017
NOTES: (continued)
6. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
7. Board assembly site may have different recommendations for stencil design.
www.ti.com
PACKAGE OUTLINE
LP0003A
TO-92 - 5.34 mm max height
S
C
A
L
E
1
.
2
0
0
S
C
A
L
E
1
.
2
0
0
TO-92
5.21
4.44
EJECTOR PIN
OPTIONAL
5.34
4.32
(1.5) TYP
(2.54)
NOTE 3
SEATING
PLANE
2X
4 MAX
(0.51) TYP
6X
0.076 MAX
SEATING
PLANE
3X
12.7 MIN
0.43
3X
0.55
0.38
2X
2.6 0.2
3X
0.35
2X 1.27 0.13
FORMED LEAD OPTION
OTHER DIMENSIONS IDENTICAL
TO STRAIGHT LEAD OPTION
STRAIGHT LEAD OPTION
2.67
2.03
3X
4.19
3.17
3
1
2
3.43 MIN
4215214/B 04/2017
NOTES:
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing
per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. Lead dimensions are not controlled within this area.
4. Reference JEDEC TO-226, variation AA.
5. Shipping method:
a. Straight lead option available in bulk pack only.
b. Formed lead option available in tape and reel or ammo pack.
c. Specific products can be offered in limited combinations of shipping medium and lead options.
d. Consult product folder for more information on available options.
www.ti.com
EXAMPLE BOARD LAYOUT
LP0003A
TO-92 - 5.34 mm max height
TO-92
FULL R
TYP
0.05 MAX
ALL AROUND
TYP
(1.07)
METAL
TYP
3X ( 0.85) HOLE
2X
METAL
(1.5)
2X (1.5)
2X
SOLDER MASK
OPENING
2
3
1
(R0.05) TYP
2X (1.07)
(1.27)
SOLDER MASK
OPENING
(2.54)
LAND PATTERN EXAMPLE
STRAIGHT LEAD OPTION
NON-SOLDER MASK DEFINED
SCALE:15X
0.05 MAX
ALL AROUND
TYP
( 1.4)
2X ( 1.4)
METAL
3X ( 0.9) HOLE
METAL
2X
2
3
1
SOLDER MASK
OPENING
(R0.05) TYP
(2.6)
SOLDER MASK
OPENING
(5.2)
LAND PATTERN EXAMPLE
FORMED LEAD OPTION
NON-SOLDER MASK DEFINED
SCALE:15X
4215214/B 04/2017
www.ti.com
TAPE SPECIFICATIONS
LP0003A
TO-92 - 5.34 mm max height
TO-92
13.7
11.7
32
23
(2.5) TYP
0.5 MIN
16.5
15.5
11.0
8.5
9.75
8.50
19.0
17.5
3.7-4.3 TYP
2.9
2.4
6.75
5.95
TYP
13.0
12.4
FOR FORMED LEAD OPTION PACKAGE
4215214/B 04/2017
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its
semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers
should obtain the latest relevant information before placing orders and should verify that such information is current and complete.
TI’s published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated
circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and
services.
Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced
documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements
different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the
associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Buyers and others who are developing systems that incorporate TI products (collectively, “Designers”) understand and agree that Designers
remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have
full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products
used in or for Designers’ applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with
respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous
consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and
take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will
thoroughly test such applications and the functionality of such TI products as used in such applications.
TI’s provision of technical, application or other design advice, quality characterization, reliability data or other services or information,
including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to
assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any
way, Designer (individually or, if Designer is acting on behalf of a company, Designer’s company) agrees to use any particular TI Resource
solely for this purpose and subject to the terms of this Notice.
TI’s provision of TI Resources does not expand or otherwise alter TI’s applicable published warranties or warranty disclaimers for TI
products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections,
enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically
described in the published documentation for a particular TI Resource.
Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that
include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY
RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or
endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
TI RESOURCES ARE PROVIDED “AS IS” AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO
ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL
PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM,
INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF
PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL,
DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN
CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949
and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements.
Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such
products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards
and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must
ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in
life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life
support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all
medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product).
Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications
and that proper product selection is at Designers’ own risk. Designers are solely responsible for compliance with all legal and regulatory
requirements in connection with such selection.
Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer’s non-
compliance with the terms and provisions of this Notice.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2017, Texas Instruments Incorporated
相关型号:
©2020 ICPDF网 联系我们和版权申明