LM339-N [TI]
低功耗低失调电压四路比较器;
| 型号： | LM339-N |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | 低功耗低失调电压四路比较器 比较器 |
| 文件： | 总33页 (文件大小：1279K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
QUAD DIFFERENTIAL COMPARATORS
Check for Samples: LM139, LM239, LM339, LM139A, LM239A, LM339A, LM2901, LM2901AV, LM2901V
1
FEATURES
•
Wide Supply Ranges
•
•
•
•
Low Input Bias Current: 25 nA (Typ)
Low Input Offset Current: 3 nA (Typ) (LM139)
Low Input Offset Voltage: 2 mV (Typ)
–
Single Supply: 2 V to 36 V
(Tested to 30 V for Non-V Devices and 32 V
for V-Suffix Devices)
Common-Mode Input Voltage Range Includes
Ground
–
Dual Supplies: ±1 V to ±18 V
(Tested to ±15 V for Non-V Devices and
±16 V for V-Suffix Devices)
•
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: ±36 V
•
Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA (Typ)
•
•
Low Output Saturation Voltage
Output Compatible With TTL, MOS, and CMOS
LM139, LM139A. . . D, J, OR W PACKAGE
LM239 . . . D, N, OR PW PACKAGE
LM239A . . . D PACKAGE
LM139, LM139A. . . FK PACKAGE
(TOP VIEW)
LM339, LM339A. . . D, DB, N, NS, OR PW PACKAGE
LM2901 . . . D, N, NS, OR PW PACKAGE
(TOP VIEW)
3
2
1 20 19
18
GND
NC
VCC
NC
4
5
6
7
8
1
2
3
4
5
6
7
14
13
12
11
10
9
1OUT
2OUT
VCC
OUT3
OUT4
GND
4IN+
4IN-
17
16
15
14
4IN+
NC
2IN-
NC
2IN-
4IN-
2IN+
2IN+
1IN-
9 10 11 12 13
3IN+
3IN-
8
1IN+
NC - No inter nal connection
DESCRIPTION/ORDERING INFORMATION
These devices consist of four independent voltage comparators that are designed to operate from a single power
supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference
between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode
voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-
collector outputs to achieve wired-AND relationships.
The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to
125°C. The LM239 and LM239A are characterized for operation from –25°C to 125°C. The LM339 and LM339A
are characterized for operation from 0°C to 70°C. The LM2901, LM2901AV, and LM2901V are characterized for
operation from –40°C to 125°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1979–2012, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
On products compliant to MIL-PRF-38535, all parameters are
Instruments standard warranty. Production processing does not
tested unless otherwise noted. On all other products, production
necessarily include testing of all parameters.
processing does not necessarily include testing of all parameters.
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
www.ti.com
Table 1. ORDERING INFORMATION(1)
VIOmax
AT 25°C
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
TA
MAX VCC
PACKAGE(2)
PDIP – N
SOIC – D
Tube of 25
LM339N
LM339N
Tube of 50
LM339D
LM339DR
LM339
Reel of 2500
LM339DRG3
LM339NSR
LM339DBR
LM339PW
5 mV
30 V
SOP – NS
Reel of 2000
Reel of 2000
Tube of 90
Reel of 2000
Tube of 25
Tube of 50
Reel of 2500
Reel of 2000
Reel of 2000
Tube of 90
Reel of 2000
Tube of 25
Tube of 50
LM339
LM339
SSOP – DB
TSSOP – PW
PDIP – N
L339
0°C to 70°C
LM339PWRG3
LM339AN
LM339AN
LM339A
LM339AD
SOIC – D
LM339ADR
LM339ANSR
LM339ADBR
LM339APW
LM339APWR
LM239N
2 mV
30 V
SOP – NS
LM339A
L339A
SSOP – DB
TSSOP – PW
PDIP – N
L339A
LM239N
LM239D
SOIC – D
LM239DR
LM239
L239
5 mV
2 mV
30 V
30 V
Reel of 2500
LM239DRG3
LM239PW
–25°C to 85°C
Tube of 90
Reel of 2000
Tube of 50
Reel of 2500
Tube of 25
Tube of 50
TSSOP – PW
LM239PWR
LM239AD
SOIC – D
PDIP – N
LM239A
LM239ADR
LM2901N
LM2901N
LM2901D
SOIC – D
LM2901DR
LM2901DRG3
LM2901NSR
LM2901PW
LM2901PWRG3
LM2901VQDR
LM2901VQPWR
LM2901AVQDR
LM2901AVQPWR
LM139W
LM2901
Reel of 2500
7 mV
30 V
SOP – NS
Reel of 2000
Tube of 90
Reel of 2000
Reel of 2500
Reel of 2000
Reel of 2500
Reel of 2000
Tube of 25
Tube of 25
Tube of 55
Tube of 50
Reel of 2500
Tube of 25
Tube of 25
Tube of 55
Tube of 50
Reel of 2500
LM2901
L2901
–40°C to 125°C
TSSOP – PW
SOIC – D
L2901V
7 mV
2 mV
32 V
32 V
TSSOP – PW
SOIC – D
L2901V
L2901AV
L2901AV
LM139W
LM139J
LM139FK
TSSOP – PW
CFP – W
CDIP – J
LM139J
5 mV
2 mV
30 V
30 V
LCCC – FK
LM139FK
LM139D
SOIC – D
LM139
LM139DR
–55°C to 125°C
CFP – W
CDIP – J
LCCC – FK
LM139AW
LM139AW
LM139AJ
LM139AFK
LM139AJ
LM139AFK
LM139AD
SOIC – D
LM139AD
LM139ADR
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
2
Submit Documentation Feedback
Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
SYMBOL (EACH COMPARATOR)
IN+
OUT
IN−
SCHEMATIC (EACH COMPARATOR)
V
CC
80-µA
Current
Regulator
60 µA
10 µA
80 µA
10 µA
IN+
IN−
OUT
GND
All current values shown are nominal.
Copyright © 1979–2012, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX UNIT
VCC
VID
VI
Supply voltage(2)
36
V
V
Differential input voltage(3)
Input voltage range (either input)
Output voltage
±36
–0.3
36
V
VO
IO
36
20
V
Output current
mA
Duration of output short circuit to ground(4)
Unlimited
86
D package
DB package
N package
NS package
PW package
FK package
J package
96
θJA
Package thermal impedance, junction to free air(5) (6)
80 °C/W
76
113
5.61
θJC
Package thermal impedance, junction to case(7) (8)
15.05 °C/W
14.65
W package
TJ
Operating virtual-junction temperature
Case temperature for 60 s
150
260
300
150
°C
°C
°C
°C
FK package
J package
Lead temperature 1,6 mm (1/16 in) from case for 60 s
Storage temperature range
Tstg
–65
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to network ground.
(3) Differential voltages are at IN+ with respect to IN–.
(4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
(5) Maximum power dissipation is a function of TJ (max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ (max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
(7) Maximum power dissipation is a function of TJ (max), θJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ (max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
(8) The package thermal impedance is calculated in accordance with MIL-STD-883.
4
Submit Documentation Feedback
Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
ELECTRICAL CHARACTERISTICS
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
LM139
MIN TYP MAX
LM139A
(2)
PARAMETER
TEST CONDITIONS(1)
TA
UNIT
MIN TYP MAX
VCC = 5 V to 30 V,
VIC = VICR min,
VO = 1.4 V
25°C
2
5
9
1
2
4
VIO
Input offset voltage
mV
Full range
25°C
Full range
25°C
3
25
3
25
IIO
Input offset current
Input bias current
VO = 1.4 V
VO = 1.4 V
nA
nA
100
100
–25 –100
–300
–25 –100
–300
IIB
Full range
0 to
VCC – 1.5
0 to
VCC – 1.5
25°C
Common-mode input-
voltage range(3)
VICR
V
0 to
VCC – 2
0 to
VCC – 2
Full range
Large-signal differential-
voltage amplification
VCC+ = ±7.5 V,
VO = –5 V to 5 V
AVD
IOH
25°C
25°C
200
50 200
0.1
V/mV
VOH = 5 V
VID = 1 V
0.1
nA
High-level output current
VOH = 30 V Full range
25°C
1
150 400
700
1
μA
150 400
700
VOL Low-level output voltage
VID = –1 V, IOL = 4 mA
mV
Full range
25°C
IOL
ICC
Low-level output current
VID = –1 V, VOL = 1.5 V
VO = 2.5 V, No load
6
16
6
16
mA
mA
Supply current
(four comparators)
25°C
0.8
2
0.8
2
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input
voltage, unless otherwise specified.
(3) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-
mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long
as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.
SWITCHING CHARACTERISTICS
VCC = 5 V, TA = 25°C
LM139
LM139A
PARAMETER
TEST CONDITIONS
UNIT
TYP
100-mV input step with 5-mV overdrive
TTL-level input step
1.3
RL connected to 5 V through 5.1 kΩ,
CL = 15 pF(1) (2)
Response time
μs
0.3
(1) CL includes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
Copyright © 1979–2012, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
www.ti.com
ELECTRICAL CHARACTERISTICS
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
LM239
LM339
LM239A
LM339A
(2)
PARAMETER
TEST CONDITIONS(1)
TA
UNIT
MIN TYP MAX
MIN TYP MAX
VCC = 5 V to 30 V,
VIC = VICR min,
VO = 1.4 V
25°C
2
5
9
1
3
4
VIO
Input offset voltage
mV
Full range
25°C
Full range
25°C
5
50
5
50
IIO
Input offset current
Input bias current
VO = 1.4 V
VO = 1.4 V
nA
nA
150
150
–25 –250
–400
–25 –250
–400
IIB
Full range
0 to
VCC – 1.5
0 to
VCC – 1.5
25°C
Common-mode input-
voltage range(3)
VICR
V
0 to
VCC – 2
0 to
VCC – 2
Full range
VCC = 15 V,
VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
Large-signal differential-
voltage amplification
AVD
25°C
25°C
50 200
0.1
50 200
0.1
V/mV
VOH = 5 V
VID = 1 V
50
1
50
1
nA
IOH
High-level output current
VOH = 30 V Full range
μA
25°C
IOL = 4 mA
150 400
700
150 400
700
VOL Low-level output voltage
VID = –1 V,
mV
Full range
IOL
ICC
Low-level output current
VID = –1 V,
VO = 2.5 V,
VOL = 1.5 V
No load
25°C
6
16
6
16
mA
mA
Supply current
(four comparators)
25°C
0.8
2
0.8
2
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM239/LM239A is –25°C to 85°C, and for LM339/LM339A is 0°C to 70°C. All characteristics are measured
with zero common-mode input voltage, unless otherwise specified.
(3) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-
mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long
as the other input remains in the common-mode range. Either or both inputs can go to 30 V without damage.
SWITCHING CHARACTERISTICS
VCC = 5 V, TA = 25°C
LM239
LM239A
LM339
LM339A
PARAMETER
TEST CONDITIONS
UNIT
TYP
1.3
100-mV input step with 5-mV overdrive
TTL-level input step
RL connected to 5 V through 5.1 kΩ,
CL = 15 pF(1) (2)
Response time
μs
0.3
(1) CL includes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
6
Submit Documentation Feedback
Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
ELECTRICAL CHARACTERISTICS
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
LM2901
(2)
PARAMETER
TEST CONDITIONS(1)
TA
UNIT
MIN
TYP
MAX
7
25°C
Full range
25°C
2
Non-A devices
A-suffix devices
VIC = VICR min,
15
VIO
Input offset voltage
VO = 1.4 V,
mV
VCC = 5 V to MAX(3)
1
5
2
Full range
25°C
4
50
IIO
Input offset current
Input bias current
VO = 1.4 V
VO = 1.4 V
nA
nA
Full range
25°C
200
–250
–500
–25
IIB
Full range
0 to
VCC – 1.5
25°C
Full range
25°C
Common-mode input-
voltage range(4)
VICR
V
0 to
VCC – 2
Large-signal differential-
voltage amplification
VCC = 15 V, VO = 1.4 V to 11.4 V,
RL ≥ 15 kΩ to VCC
AVD
IOH
25
100
0.1
V/mV
VOH = 5 V
25°C
50
1
nA
High-level output current
VID = 1 V
VOH = VCC MAX(3)
Non-V devices
V-suffix devices
All devices
Full range
μA
150
150
500
400
700
25°C
VID = –1 V,
IOL = 4 mA
VOL
Low-level output voltage
Low-level output current
mV
Full range
25°C
IOL
ICC
VID = –1 V,
VOL = 1.5 V
6
16
0.8
1
mA
mA
VCC = 5 V
VCC = MAX(3)
2
Supply current
(four comparators)
VO = 2.5 V,
No load
25°C
2.5
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless
otherwise specified.
(3) VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices
(4) The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-
mode voltage range is VCC+ – 1.5 V; however, one input can exceed VCC, and the comparator will provide a proper output state as long
as the other input remains in the common-mode range. Either or both inputs can go to VCC MAX without damage.
SWITCHING CHARACTERISTICS
VCC = 5 V, TA = 25°C
LM2901
PARAMETER
TEST CONDITIONS
UNIT
TYP
1.3
100-mV input step with 5-mV overdrive
TTL-level input step
RL connected to 5 V through 5.1 kΩ,
CL = 15 pF(1) (2)
Response time
μs
0.3
(1) CL includes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
Copyright © 1979–2012, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
www.ti.com
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
INPUT BIAS CURRENT
vs
SUPPLY VOLTAGE
SUPPLY VOLTAGE
80
70
60
50
40
30
20
10
0
1.8
1.6
TA = –55°C
TA = –55°C
1.4
TA = 25°C
TA = 0°C
1.2
TA = 0°C
TA = 25°C
1
TA = 70°C
TA = 70°C
0.8
TA = 125°C
0.6
0.4
0.2
0
TA = 125°C
0
5
10
15
20
25
30
35
0
5
10
15
20
25
30
35
VCC – Supply Voltage – V
VCC – Supply Voltage – V
OUTPUT SATURATION VOLTAGE
10
1
TA = 125°C
TA = 25°C
0.1
0.01
TA = –55°C
0.001
0.01
0.1
1
10
100
IO – Output Sink Current – mA
8
Submit Documentation Feedback
Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
www.ti.com
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
TYPICAL CHARACTERISTICS (continued)
RESPONSE TIME FOR VARIOUS OVERDRIVES
NEGATIVE TRANSITION
RESPONSE TIME FOR VARIOUS OVERDRIVES
POSITIVE TRANSITION
6
5
6
5
Overdrive = 5 mV
Overdrive = 5 mV
Overdrive = 20 mV
4
4
Overdrive = 20 mV
Overdrive = 100 mV
3
3
Overdrive = 100 mV
2
2
1
1
0
0
-1
-1
-0.3
0
0.25 0.5 0.75
1
1.25 1.5 1.75
2
2.25
-0.3
0
0.25 0.5 0.75
1
1.25 1.5 1.75
2
2.25
t – Time – µs
t – Time – µs
Copyright © 1979–2012, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
LM139, LM239, LM339
LM139A, LM239A, LM339A
LM2901, LM2901AV, LM2901V
SLCS006S –OCTOBER 1979–REVISED AUGUST 2012
www.ti.com
REVISION HISTORY
Changes from Revision R (July 2010) to Revision S
Page
•
Updated ORDERING INFORMATION table. ........................................................................................................................ 2
10
Submit Documentation Feedback
Copyright © 1979–2012, Texas Instruments Incorporated
Product Folder Links: LM139 LM239 LM339 LM139A LM239A LM339A LM2901 LM2901AV LM2901V
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
5962-7700801VCA
ACTIVE
CDIP
J
14
20
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-7700801VC
A
LM139JQMLV
5962-87739012A
ACTIVE
LCCC
FK
1
TBD
Call TI
Call TI
-55 to 125
5962-
87739012A
LM139AFKB
5962-8773901CA
5962-8773901DA
ACTIVE
ACTIVE
CDIP
CFP
J
14
14
1
1
TBD
TBD
Call TI
Call TI
Call TI
Call TI
-55 to 125
-55 to 125
5962-8773901CA
LM139AJB
W
5962-8773901DA
LM139AWB
5962-9673802V9B
5962-9673802VCA
ACTIVE
ACTIVE
XCEPT
CDIP
KGD
J
0
100
1
TBD
TBD
Call TI
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
14
5962-9673802VC
A
LM139AJQMLV
77008012A
7700801CA
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
LCCC
CDIP
CFP
FK
J
20
14
14
14
14
14
14
14
20
1
1
TBD
TBD
TBD
TBD
Call TI
Call TI
Call TI
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
77008012A
LM139FKB
Call TI
7700801CA
LM139JB
7700801DA
W
J
1
Call TI
Call TI
7700801DA
LM139WB
JM38510/11201BCA
LM139AD
CDIP
SOIC
SOIC
SOIC
SOIC
LCCC
1
A42
N / A for Pkg Type
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
JM38510
/11201BCA
D
50
50
2500
2500
1
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
POST-PLATE
LM139A
LM139A
LM139A
LM139A
LM139ADG4
LM139ADR
D
Green (RoHS
& no Sb/Br)
D
Green (RoHS
& no Sb/Br)
LM139ADRG4
LM139AFKB
D
Green (RoHS
& no Sb/Br)
FK
TBD
5962-
87739012A
LM139AFKB
LM139AJ
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
LM139AJ
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LM139AJB
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
5962-8773901CA
LM139AJB
LM139AN
LM139AW
OBSOLETE
ACTIVE
PDIP
CFP
N
14
14
TBD
TBD
Call TI
A42
Call TI
-55 to 125
-55 to 125
W
1
1
N / A for Pkg Type
LM139AW
LM139AWB
LM139D
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
CFP
SOIC
SOIC
SOIC
SOIC
W
D
D
D
D
14
14
14
14
14
TBD
A42
N / A for Pkg Type
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
5962-8773901DA
LM139AWB
50
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
LM139
LM139
LM139
LM139
LM139FK
LM139DG4
LM139DR
Green (RoHS
& no Sb/Br)
2500
2500
Green (RoHS
& no Sb/Br)
LM139DRG4
Green (RoHS
& no Sb/Br)
LM139FK
ACTIVE
ACTIVE
LCCC
LCCC
FK
FK
20
20
1
1
TBD
POST-PLATE
POST-PLATE
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
LM139FKB
TBD
77008012A
LM139FKB
LM139J
ACTIVE
ACTIVE
CDIP
CDIP
J
J
14
14
1
1
TBD
TBD
A42
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
LM139J
LM139JB
7700801CA
LM139JB
LM139N
LM139W
OBSOLETE
ACTIVE
PDIP
CFP
N
14
14
TBD
TBD
Call TI
A42
Call TI
-55 to 125
-55 to 125
W
1
1
N / A for Pkg Type
LM139W
LM139WB
LM239AD
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
CFP
SOIC
SOIC
SOIC
SOIC
W
D
D
D
D
14
14
14
14
14
TBD
A42
N / A for Pkg Type
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-55 to 125
-25 to 85
-25 to 85
-25 to 85
-25 to 85
7700801DA
LM139WB
50
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
LM239A
LM239A
LM239A
LM239A
LM239ADE4
LM239ADG4
LM239ADR
Green (RoHS
& no Sb/Br)
50
Green (RoHS
& no Sb/Br)
2500
Green (RoHS
& no Sb/Br)
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-25 to 85
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LM239ADRE4
LM239ADRG4
ACTIVE
SOIC
SOIC
D
14
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
LM239A
ACTIVE
D
2500
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
-25 to 85
LM239A
LM239AN
LM239D
OBSOLETE
ACTIVE
PDIP
SOIC
N
D
14
14
TBD
Call TI
Call TI
-25 to 85
-25 to 85
50
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM239
LM239
LM239
LM239
LM239
LM239
LM239
LM239N
LM239N
L239
LM239DE4
LM239DG4
LM239DR
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
D
D
14
14
14
14
14
14
14
14
14
14
14
14
14
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
-25 to 85
50
Green (RoHS
& no Sb/Br)
SOIC
D
2500
2500
2500
2500
25
Green (RoHS
& no Sb/Br)
LM239DRE4
LM239DRG3
LM239DRG4
LM239N
SOIC
D
Green (RoHS
& no Sb/Br)
SOIC
D
Green (RoHS
& no Sb/Br)
SOIC
D
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
PDIP
N
Pb-Free
(RoHS)
LM239NE4
LM239PW
PDIP
N
25
Pb-Free
(RoHS)
N / A for Pkg Type
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
PW
PW
PW
PW
PW
PW
90
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
LM239PWE4
LM239PWG4
LM239PWR
LM239PWRE4
LM239PWRG4
90
Green (RoHS
& no Sb/Br)
L239
90
Green (RoHS
& no Sb/Br)
L239
2000
2000
2000
Green (RoHS
& no Sb/Br)
L239
Green (RoHS
& no Sb/Br)
L239
Green (RoHS
& no Sb/Br)
L239
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
-40 to 125
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LM2901AVQDR
LM2901AVQDRG4
LM2901AVQPWR
LM2901AVQPWRG4
LM2901D
ACTIVE
SOIC
SOIC
TSSOP
TSSOP
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
SO
D
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
L2901AV
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
D
PW
PW
D
2500
2000
2000
50
Green (RoHS
& no Sb/Br)
L2901AV
L2901AV
L2901AV
LM2901
LM2901
LM2901
LM2901
LM2901
LM2901
LM2901
LM2901N
LM2901N
LM2901
LM2901
LM2901
L2901
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
LM2901DE4
D
50
Green (RoHS
& no Sb/Br)
LM2901DG4
D
50
Green (RoHS
& no Sb/Br)
LM2901DR
D
2500
2500
2500
2500
25
Green (RoHS
& no Sb/Br)
LM2901DRE4
LM2901DRG3
LM2901DRG4
LM2901N
D
Green (RoHS
& no Sb/Br)
D
Green (RoHS
& no Sb/Br)
D
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
N
Pb-Free
(RoHS)
LM2901NE4
N
25
Pb-Free
(RoHS)
N / A for Pkg Type
LM2901NSR
NS
NS
NS
PW
PW
2000
2000
2000
90
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
LM2901NSRE4
LM2901NSRG4
LM2901PW
SO
Green (RoHS
& no Sb/Br)
SO
Green (RoHS
& no Sb/Br)
TSSOP
TSSOP
Green (RoHS
& no Sb/Br)
LM2901PWE4
90
Green (RoHS
& no Sb/Br)
L2901
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LM2901PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 125
L2901
LM2901PWLE
LM2901PWR
OBSOLETE
ACTIVE
TSSOP
TSSOP
PW
PW
14
14
TBD
Call TI
Call TI
-40 to 125
-40 to 125
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
L2901
L2901
L2901
L2901
LM2901PWRE4
LM2901PWRG3
LM2901PWRG4
ACTIVE
ACTIVE
ACTIVE
TSSOP
TSSOP
TSSOP
PW
PW
PW
14
14
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-40 to 125
-40 to 125
-40 to 125
2000
2000
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
CU NIPDAU
LM2901QD
LM2901QN
OBSOLETE
OBSOLETE
ACTIVE
SOIC
PDIP
SOIC
D
N
D
14
14
14
TBD
TBD
Call TI
Call TI
Call TI
Call TI
-40 to 125
-40 to 125
-40 to 125
LM2901VQDR
2500
2500
2000
2000
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
L2901V
L2901V
L2901V
L2901V
LM339A
L339A
LM2901VQDRG4
LM2901VQPWR
LM2901VQPWRG4
LM339AD
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
TSSOP
TSSOP
SOIC
D
PW
PW
D
14
14
14
14
14
14
14
14
14
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-40 to 125
-40 to 125
-40 to 125
0 to 70
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
LM339ADBR
SSOP
SSOP
SOIC
DB
DB
D
2000
2000
50
Green (RoHS
& no Sb/Br)
0 to 70
LM339ADBRG4
LM339ADE4
Green (RoHS
& no Sb/Br)
0 to 70
L339A
Green (RoHS
& no Sb/Br)
0 to 70
LM339A
LM339A
LM339A
LM339A
LM339ADG4
SOIC
D
50
Green (RoHS
& no Sb/Br)
0 to 70
LM339ADR
SOIC
D
2500
2500
Green (RoHS
& no Sb/Br)
0 to 70
LM339ADRE4
SOIC
D
Green (RoHS
& no Sb/Br)
0 to 70
Addendum-Page 5
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
0 to 70
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LM339ADRG4
LM339AN
ACTIVE
SOIC
PDIP
D
14
14
14
14
14
14
14
14
14
14
14
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
LM339A
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
N
25
25
Pb-Free
(RoHS)
N / A for Pkg Type
LM339AN
LM339AN
LM339A
LM339A
L339A
LM339ANE4
LM339ANSR
LM339ANSRG4
LM339APW
PDIP
N
Pb-Free
(RoHS)
N / A for Pkg Type
SO
NS
NS
PW
PW
PW
PW
PW
PW
D
2000
2000
90
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
SO
Green (RoHS
& no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
SOIC
Green (RoHS
& no Sb/Br)
LM339APWE4
LM339APWG4
LM339APWR
LM339APWRE4
LM339APWRG4
LM339D
90
Green (RoHS
& no Sb/Br)
L339A
90
Green (RoHS
& no Sb/Br)
L339A
2000
2000
2000
50
Green (RoHS
& no Sb/Br)
L339A
Green (RoHS
& no Sb/Br)
L339A
Green (RoHS
& no Sb/Br)
L339A
Green (RoHS
& no Sb/Br)
LM339
LM339DBLE
LM339DBR
OBSOLETE
ACTIVE
SSOP
SSOP
DB
DB
14
14
TBD
Call TI
Call TI
0 to 70
0 to 70
2000
2000
2000
50
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339
LM339
LM339
LM339
LM339
LM339DBRE4
LM339DBRG4
LM339DE4
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SSOP
SSOP
SOIC
SOIC
DB
DB
D
14
14
14
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
0 to 70
0 to 70
0 to 70
0 to 70
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
LM339DG4
D
50
Green (RoHS
& no Sb/Br)
Addendum-Page 6
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
0 to 70
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
LM339DR
LM339DRE4
LM339DRG3
LM339DRG4
LM339N
ACTIVE
SOIC
SOIC
SOIC
SOIC
PDIP
PDIP
PDIP
D
14
14
14
14
14
14
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
N / A for Pkg Type
N / A for Pkg Type
LM339
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
D
D
D
N
N
N
2500
2500
2500
25
Green (RoHS
& no Sb/Br)
0 to 70
LM339
Green (RoHS
& no Sb/Br)
0 to 70
LM339
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU SN
0 to 70
LM339
Pb-Free
(RoHS)
0 to 70
LM339N
LM339N
LM339N
LM339NE3
LM339NE4
25
Pb-Free
(RoHS)
0 to 70
25
Pb-Free
(RoHS)
CU NIPDAU
0 to 70
LM339NSLE
LM339NSR
OBSOLETE
ACTIVE
SO
SO
NS
NS
14
14
TBD
Call TI
Call TI
0 to 70
0 to 70
2000
2000
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM339
LM339
L339
LM339NSRG4
LM339PW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SO
NS
PW
PW
PW
14
14
14
14
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
0 to 70
0 to 70
0 to 70
0 to 70
TSSOP
TSSOP
TSSOP
Green (RoHS
& no Sb/Br)
LM339PWE4
LM339PWG4
90
Green (RoHS
& no Sb/Br)
L339
90
Green (RoHS
& no Sb/Br)
L339
LM339PWLE
LM339PWR
OBSOLETE
ACTIVE
TSSOP
TSSOP
PW
PW
14
14
TBD
Call TI
Call TI
0 to 70
0 to 70
2000
2000
2000
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
L339
L339
L339
L339
LM339PWRE4
LM339PWRG3
LM339PWRG4
LM339Y
ACTIVE
ACTIVE
TSSOP
TSSOP
TSSOP
PW
PW
PW
14
14
14
0
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU SN
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Call TI
0 to 70
0 to 70
0 to 70
0 to 70
Green (RoHS
& no Sb/Br)
ACTIVE
Green (RoHS
& no Sb/Br)
CU NIPDAU
Call TI
OBSOLETE
TBD
Addendum-Page 7
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
M38510/11201BCA
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
Qty
(1)
(2)
(3)
(4)
ACTIVE
CDIP
J
14
1
TBD
A42
N / A for Pkg Type
-55 to 125
JM38510
/11201BCA
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LM139, LM139-SP, LM239A, LM2901, LM2901AV, LM2901V :
Catalog: LM139
•
Automotive: LM239A-Q1, LM2901-Q1, LM2901AV-Q1, LM2901V-Q1
•
Addendum-Page 8
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Enhanced Product: LM239A-EP
•
Space: LM139-SP
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
•
•
•
•
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Enhanced Product - Supports Defense, Aerospace and Medical Applications
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
Addendum-Page 9
PACKAGE MATERIALS INFORMATION
www.ti.com
15-Jun-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM139ADR
LM139DR
SOIC
SOIC
D
D
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
2500
2500
2500
2500
2500
2500
2500
2000
2000
2000
2500
2500
2500
2000
2000
2000
2000
2000
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
16.4
16.4
16.4
16.4
16.4
16.4
16.4
12.4
12.4
12.4
16.4
16.4
16.4
16.4
12.4
12.4
12.4
12.4
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.9
6.9
6.9
6.5
6.5
6.5
8.2
7.0
7.0
6.9
6.9
9.0
9.0
9.0
9.0
9.0
9.0
9.0
5.6
5.6
5.6
9.0
9.0
9.0
10.5
5.6
5.6
5.6
5.6
2.1
2.1
2.1
2.1
2.1
2.1
2.1
1.6
1.6
1.6
2.1
2.1
2.1
2.5
1.6
1.6
1.6
1.6
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
12.0
8.0
8.0
8.0
8.0
16.0
16.0
16.0
16.0
16.0
16.0
16.0
12.0
12.0
12.0
16.0
16.0
16.0
16.0
12.0
12.0
12.0
12.0
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
LM239ADR
SOIC
D
LM239ADR
SOIC
D
LM239DR
SOIC
D
LM239DR
SOIC
D
LM239DRG4
LM239PWR
SOIC
D
TSSOP
TSSOP
TSSOP
SOIC
PW
PW
PW
D
LM2901AVQPWR
LM2901AVQPWRG4
LM2901DR
LM2901DR
SOIC
D
LM2901DRG4
LM2901NSR
LM2901PWR
LM2901PWRG3
LM2901PWRG4
LM2901VQPWR
SOIC
D
SO
NS
PW
PW
PW
PW
TSSOP
TSSOP
TSSOP
TSSOP
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
15-Jun-2013
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM2901VQPWRG4
LM339ADBR
LM339ADR
TSSOP
SSOP
SOIC
PW
DB
D
14
14
14
14
14
14
14
14
14
14
14
14
14
14
2000
2000
2500
2500
2500
2000
2000
2500
2500
2500
2000
2000
2000
2000
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
12.4
16.4
16.4
16.4
16.4
16.4
12.4
16.4
16.4
16.4
12.4
12.4
12.4
12.4
6.9
8.2
6.5
6.5
6.5
8.2
6.9
6.5
6.5
6.5
7.0
6.9
7.0
6.9
5.6
6.6
9.0
9.0
9.0
10.5
5.6
9.0
9.0
9.0
5.6
5.6
5.6
5.6
1.6
2.5
2.1
2.1
2.1
2.5
1.6
2.1
2.1
2.1
1.6
1.6
1.6
1.6
8.0
12.0
8.0
8.0
8.0
12.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
12.0
16.0
16.0
16.0
16.0
16.0
12.0
16.0
16.0
16.0
12.0
12.0
12.0
12.0
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
LM339ADR
SOIC
D
LM339ADRG4
LM339ANSR
LM339APWR
LM339DR
SOIC
D
SO
NS
PW
D
TSSOP
SOIC
LM339DR
SOIC
D
LM339DRG4
LM339PWR
LM339PWR
LM339PWRG3
LM339PWRG4
SOIC
D
TSSOP
TSSOP
TSSOP
TSSOP
PW
PW
PW
PW
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LM139ADR
LM139DR
LM239ADR
SOIC
SOIC
SOIC
D
D
D
14
14
14
2500
2500
2500
367.0
367.0
333.2
367.0
367.0
345.9
38.0
38.0
28.6
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
15-Jun-2013
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LM239ADR
LM239DR
SOIC
SOIC
D
D
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
2500
2500
2500
2500
2000
2000
2000
2500
2500
2500
2000
2000
2000
2000
2000
2000
2000
2500
2500
2500
2000
2000
2500
2500
2500
2000
2000
2000
2000
367.0
367.0
333.2
333.2
367.0
367.0
367.0
367.0
333.2
333.2
367.0
364.0
364.0
367.0
367.0
367.0
367.0
367.0
333.2
333.2
367.0
367.0
367.0
333.2
333.2
364.0
367.0
364.0
367.0
367.0
367.0
345.9
345.9
367.0
367.0
367.0
367.0
345.9
345.9
367.0
364.0
364.0
367.0
367.0
367.0
367.0
367.0
345.9
345.9
367.0
367.0
367.0
345.9
345.9
364.0
367.0
364.0
367.0
38.0
38.0
28.6
28.6
35.0
35.0
35.0
38.0
28.6
28.6
38.0
27.0
27.0
35.0
35.0
35.0
38.0
38.0
28.6
28.6
38.0
35.0
38.0
28.6
28.6
27.0
35.0
27.0
35.0
LM239DR
SOIC
D
LM239DRG4
LM239PWR
SOIC
D
TSSOP
TSSOP
TSSOP
SOIC
PW
PW
PW
D
LM2901AVQPWR
LM2901AVQPWRG4
LM2901DR
LM2901DR
SOIC
D
LM2901DRG4
LM2901NSR
LM2901PWR
LM2901PWRG3
LM2901PWRG4
LM2901VQPWR
LM2901VQPWRG4
LM339ADBR
LM339ADR
SOIC
D
SO
NS
PW
PW
PW
PW
PW
DB
D
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
SSOP
SOIC
LM339ADR
SOIC
D
LM339ADRG4
LM339ANSR
LM339APWR
LM339DR
SOIC
D
SO
NS
PW
D
TSSOP
SOIC
LM339DR
SOIC
D
LM339DRG4
LM339PWR
SOIC
D
TSSOP
TSSOP
TSSOP
TSSOP
PW
PW
PW
PW
LM339PWR
LM339PWRG3
LM339PWRG4
Pack Materials-Page 3
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号：
©2020 ICPDF网 联系我们和版权申明