LM236-2.5-N [TI]
LM136-2.5/LM236-2.5/LM336-2.5V Reference Diode; LM136-2.5 / LM236-2.5 / LM336-2.5V参考二极管
| 型号： | LM236-2.5-N |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | LM136-2.5/LM236-2.5/LM336-2.5V Reference Diode |
| 文件： | 总14页 (文件大小：715K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LM136-2.5,LM236-2.5,LM336-2.5
LM136-2.5/LM236-2.5/LM336-2.5V Reference Diode
Literature Number: SNVS749D
June 2005
LM136-2.5/LM236-2.5/LM336-2.5V
Reference Diode
The LM336-2.5 is rated for operation over a 0˚C to +70˚C
temperature range. See the connection diagrams for avail-
able packages.
General Description
The LM136-2.5/LM236-2.5 and LM336-2.5 integrated cir-
cuits are precision 2.5V shunt regulator diodes. These
monolithic IC voltage references operate as
a low-
Features
temperature-coefficient 2.5V zener with 0.2Ω dynamic im-
pedance. A third terminal on the LM136-2.5 allows the refer-
ence voltage and temperature coefficient to be trimmed
easily.
n Low temperature coefficient
n Wide operating current of 400 µA to 10 mA
n 0.2Ω dynamic impedance
n
1% initial tolerance available
The LM136-2.5 series is useful as a precision 2.5V low
voltage reference for digital voltmeters, power supplies or op
amp circuitry. The 2.5V make it convenient to obtain a stable
reference from 5V logic supplies. Further, since the LM136-
2.5 operates as a shunt regulator, it can be used as either a
positive or negative voltage reference.
n Guaranteed temperature stability
n Easily trimmed for minimum temperature drift
n Fast turn-on
The LM136-2.5 is rated for operation over −55˚C to +125˚C
while the LM236-2.5 is rated over a −25˚C to +85˚C tem-
perature range.
Connection Diagrams
SO Package
TO-92
Plastic Package
00571508
Bottom View
Order Number LM336Z-2.5 or LM336BZ-2.5
See NS Package Number Z03A
00571512
Top View
TO-46
Metal Can Package
Order Number LM236M-2.5,
LM236AM-2.5, LM336M-2.5
or LM336BM-2.5
See NS Package Number M08A
00571520
Bottom View
Order Number LM136H-2.5,
LM136H-2.5/883, LM236H-2.5,
or LM236AH-2.5
See NS Package Number H03H
© 2005 National Semiconductor Corporation
DS005715
www.national.com
Typical Applications
Wide Input Range Reference
2.5V Reference
00571509
2.5V Reference with Minimum
Temperature Coefficient
00571511
00571510
†Adjust to 2.490V
*
Any silicon signal diode
www.national.com
2
Absolute Maximum Ratings (Note 1)
LM336
0˚C to +70˚C
Soldering Information
TO-92 Package (10 sec.)
TO-46 Package (10 sec.)
SO Package
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
260˚C
300˚C
Reverse Current
Forward Current
Storage Temperature
Operating Temperature Range (Note 2)
LM136
15 mA
10 mA
Vapor Phase (60 sec.)
Infrared (15 sec.)
215˚C
220˚C
−60˚C to +150˚C
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” (Appendix D) for other methods of
soldering surface mount devices.
−55˚C to +150˚C
−25˚C to +85˚C
LM236
Electrical Characteristics (Note 3)
LM136A-2.5/LM236A-2.5
LM136-2.5/LM236-2.5
LM336B-2.5
LM336-2.5
Parameter
Conditions
TA=25˚C, IR=1 mA
Units
Min
Typ
Max
Min
Typ Max
Reverse Breakdown
Voltage
LM136, LM236, LM336
LM136A, LM236A, LM336B
TA=25˚C,
2.440
2.465
2.490 2.540
2.490 2.515
2.390
2.440
2.490 2.590
2.490 2.540
V
V
Reverse Breakdown
Change
2.6
6
2.6
10
mV
With Current
400 µA≤IR≤10 mA
Reverse Dynamic
Impedance
TA=25˚C, IR=1 mA, f = 100 Hz
0.2
0.6
0.2
1
Ω
Temperature Stability
(Note 4)
VR Adjusted to 2.490V
IR=1 mA, Figure 2
0˚C≤TA≤70˚C (LM336)
−25˚C≤TA≤+85˚C
1.8
6
mV
mV
3.5
9
(LM236H, LM236Z)
−25˚C ≤ TA ≤ +85˚C (LM236M)
−55˚C≤TA≤+125˚C (LM136)
400 µA≤IR≤10 mA
7.5
12
3
18
18
10
mV
mV
mV
Reverse Breakdown
Change
3
12
With Current
Reverse Dynamic
Impedance
IR=1 mA
0.4
20
1
0.4
20
1.4
Ω
Long Term Stability
TA=25˚C 0.1˚C, IR=1 mA,
t = 1000 hrs
ppm
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device
beyond its specified operating conditions.
Note 2: For elevated temperature operation, T max is:
j
LM136
LM236
LM336
150˚C
125˚C
100˚C
Thermal Resistance
TO-92
180˚C/W (0.4" leads)
170˚C/W (0.125" lead)
n/a
TO-46
SO-8
θja (Junction to Ambient)
440˚C/W 165˚C/W
θja (Junction to Case)
80˚C/W
n/a
3
www.national.com
Electrical Characteristics (Note 3) (Continued)
Note 3: Unless otherwise specified, the LM136-2.5 is specified from −55˚C ≤ T ≤ +125˚C, the LM236-2.5 from −25˚C ≤ T ≤ +85˚C and the LM336-2.5 from 0˚C
A
A
≤ T ≤ +70˚C.
A
Note 4: Temperature stability for the LM336 and LM236 family is guaranteed by design. Design limits are guaranteed (but not 100% production tested) over the
indicated temperature and supply voltage ranges. These limits are not used to calculate outgoing quality levels. Stability is defined as the maximum change in V
ref
from 25˚C to T (min) or T (max).
A
A
www.national.com
4
Typical Performance Characteristics
Reverse Voltage Change
Zener Noise Voltage
00571522
00571521
Dynamic Impedance
Response Time
00571524
00571523
Reverse Characteristics
Forward Characteristics
00571525
00571526
5
www.national.com
Typical Performance
Characteristics (Continued)
Temperature Drift
00571528
FIGURE 1. LM136 With Pot for Adjustment
of Breakdown Voltage
(Trim Range = 120 mV typical)
00571527
Application Hints
The LM136 series voltage references are much easier to use
than ordinary zener diodes. Their low impedance and wide
operating current range simplify biasing in almost any circuit.
Further, either the breakdown voltage or the temperature
coefficient can be adjusted to optimize circuit performance.
Figure 1 shows an LM136 with a 10k potentiometer for
adjusting the reverse breakdown voltage. With the addition
of R1 the breakdown voltage can be adjusted without affect-
ing the temperature coefficient of the device. The adjustment
range is usually sufficient to adjust for both the initial device
tolerance and inaccuracies in buffer circuitry.
If minimum temperature coefficient is desired, two diodes
can be added in series with the adjustment potentiometer as
shown in Figure 2. When the device is adjusted to 2.490V
the temperature coefficient is minimized. Almost any silicon
signal diode can be used for this purpose such as a 1N914,
1N4148 or a 1N457. For proper temperature compensation
the diodes should be in the same thermal environment as
the LM136. It is usually sufficient to mount the diodes near
the LM136 on the printed circuit board. The absolute resis-
tance of R1 is not critical and any value from 2k to 20k will
work.
00571529
FIGURE 2. Temperature Coefficient Adjustment
(Trim Range = 70 mV typical)
www.national.com
6
Application Hints (Continued)
Low Cost 2 Amp Switching Regulator†
00571505
*
L1 60 turns #16 wire on Arnold Core A-254168-2
†Efficiency ≈ 80%
Precision Power Regulator with Low Temperature Coefficient
00571513
5V Crowbar
Trimmed 2.5V Reference with
Temperature Coefficient Independent
of Breakdown Voltage
00571515
*
Does not affect temperature coefficient
00571514
7
www.national.com
Application Hints (Continued)
Adjustable Shunt Regulator
00571506
Linear Ohmmeter
00571516
www.national.com
8
Application Hints (Continued)
2.5V Square Wave Calibrator
Op Amp with Output Clamped
00571519
5V Buffered Reference
00571517
Bipolar Output Reference
00571530
Low Noise Buffered Reference
00571531
00571518
9
www.national.com
Schematic Diagram
00571501
www.national.com
10
Physical Dimensions inches (millimeters)
unless otherwise noted
Order Number LM136H-2.5, LM136H-2.5/883, LM236H-2.5, LM136AH-2.5, LM136AH-2.5/883 or LM236AH-2.5
NS Package Number H03H
Small Outline (SO) Package (M)
Order Number LM236M-2.5, LM236AM-2.5, LM336M-2.5 or LM336BM-2.5
NS Package Number M08A
11
www.national.com
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
TO-92 Plastic Package (Z)
Order Number LM336Z-2.5 or LM336BZ-2.5
NS Package Number Z03A
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Leadfree products are RoHS compliant.
National Semiconductor
Americas Customer
Support Center
National Semiconductor
Europe Customer Support Center
Fax: +49 (0) 180-530 85 86
National Semiconductor
Asia Pacific Customer
Support Center
National Semiconductor
Japan Customer Support Center
Fax: 81-3-5639-7507
Email: new.feedback@nsc.com
Tel: 1-800-272-9959
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
Email: ap.support@nsc.com
Email: jpn.feedback@nsc.com
Tel: 81-3-5639-7560
www.national.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
Medical
Security
Logic
Space, Avionics and Defense www.ti.com/space-avionics-defense
Transportation and Automotive www.ti.com/automotive
Power Mgmt
Microcontrollers
RFID
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2011, Texas Instruments Incorporated
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明