LM135H-MIL/NOPB [TI]
ANALOG TEMP SENSOR-VOLTAGE, 0.002V, 1Cel, ROUND, THROUGH HOLE MOUNT;型号: | LM135H-MIL/NOPB |
厂家: | TEXAS INSTRUMENTS |
描述: | ANALOG TEMP SENSOR-VOLTAGE, 0.002V, 1Cel, ROUND, THROUGH HOLE MOUNT 传感器 温度传感器 |
文件: | 总24页 (文件大小:1266K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LM135, LM135A, LM235, LM235A, LM335, LM335A
www.ti.com
SNIS160D –MAY 1999–REVISED MARCH 2013
LM135/LM235/LM335, LM135A/LM235A/LM335A Precision Temperature Sensors
Check for Samples: LM135, LM135A, LM235, LM235A, LM335, LM335A
1
FEATURES
•
•
•
•
Easily Calibrated
Wide Operating Temperature Range
200°C Overrange
2
•
Directly Calibrated in °Kelvin
1°C Initial Accuracy Available
Operates from 400 μA to 5 mA
Less than 1Ω Dynamic Impedance
•
•
•
Low Cost
DESCRIPTION
The LM135 series are precision, easily-calibrated, integrated circuit temperature sensors. Operating as a 2-
terminal zener, the LM135 has a breakdown voltage directly proportional to absolute temperature at +10 mV/°K.
With less than 1Ω dynamic impedance the device operates over a current range of 400 μA to 5 mA with virtually
no change in performance. When calibrated at 25°C the LM135 has typically less than 1°C error over a 100°C
temperature range. Unlike other sensors the LM135 has a linear output.
Applications for the LM135 include almost any type of temperature sensing over a −55°C to 150°C temperature
range. The low impedance and linear output make interfacing to readout or control circuitry especially easy.
The LM135 operates over a −55°C to 150°C temperature range while the LM235 operates over a −40°C to
125°C temperature range. The LM335 operates from −40°C to 100°C. The LM135/LM235/LM335 are available
packaged in hermetic TO transistor packages while the LM335 is also available in plastic TO-92 packages.
Schematic Diagram
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated
LM135, LM135A, LM235, LM235A, LM335, LM335A
SNIS160D –MAY 1999–REVISED MARCH 2013
www.ti.com
Absolute Maximum Ratings(1)(2)
Reverse Current
15 mA
10 mA
Forward Current
Storage Temperature
8-Pin SOIC Package
−65°C to 150°C
−60°C to 150°C
−60°C to 180°C
TO-92 Package
TO Package
Specified Operating Temp. Range
Continuous
−55°C to 150°C
−40°C to 125°C
−40°C to 100°C
Intermittent(3)
150°C to 200°C
125°C to 150°C
100°C to 125°C
LM135, LM135A
LM235, LM235A
LM335, LM335A
Lead Temp. (Soldering, 10 seconds)
8-Pin SOIC Package:
Vapor Phase (60 seconds):
Infrared (15 seconds):
TO-92 Package:
300°C
215°C
220°C
260°C
300°C
TO Package:
(1) Refer to RETS135H for military specifications.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(3) Continuous operation at these temperatures for 10,000 hours for NDV package and 5,000 hours for LP package may decrease life
expectancy of the device.
Temperature Accuracy(1)
LM135/LM235, LM135A/LM235A
Parameter
Conditions
LM135A/LM235A
LM135/LM235
Units
Min
2.97
Typ
2.98
0.5
Max
Min
Typ
2.98
1
Max
3.01
3
Operating Output Voltage
Uncalibrated Temperature Error
Uncalibrated Temperature Error
Temperature Error with 25°C
Calibration
TC = 25°C, IR = 1 mA
TC = 25°C, IR = 1 mA
2.99
1
2.95
V
°C
°C
°C
TMIN ≤ TC ≤ TMAX, IR = 1 mA
MIN ≤ TC ≤ TMAX, IR = 1 mA
1.3
2.7
1
2
5
T
0.3
0.5
1.5
Calibrated Error at Extended
Temperatures
TC = TMAX (Intermittent)
IR = 1 mA
2
2
°C
°C
Non-Linearity
0.3
0.5
0.3
1
(1) Accuracy measurements are made in a well-stirred oil bath. For other conditions, self heating must be considered.
Temperature Accuracy(1)
LM335, LM335A
Parameter
Conditions
LM335A
LM335
Units
Min
Typ
2.98
1
Max
3.01
3
Min
Typ
2.98
2
Max
3.04
6
Operating Output Voltage
Uncalibrated Temperature Error
Uncalibrated Temperature Error
Temperature Error with 25°C
Calibration
TC = 25°C, IR = 1 mA
TC = 25°C, IR = 1 mA
2.95
2.92
V
°C
°C
°C
TMIN ≤ TC ≤ TMAX, IR = 1 mA
MIN ≤ TC ≤ TMAX, IR = 1 mA
2
5
4
9
T
0.5
1
1
2
Calibrated Error at Extended
Temperatures
TC = TMAX (Intermittent)
IR = 1 mA
2
2
°C
°C
Non-Linearity
0.3
1.5
0.3
1.5
(1) Accuracy measurements are made in a well-stirred oil bath. For other conditions, self heating must be considered.
2
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
www.ti.com
SNIS160D –MAY 1999–REVISED MARCH 2013
Electrical Characteristics(1)
LM135/LM235
LM335
LM335A
Typ
Parameter
Conditions
LM135A/LM235A
Units
Min
Typ
Max
10
Min
Max
Operating Output Voltage
Change with Current
Dynamic Impedance
Output Voltage Temperature
Coefficient
400 μA ≤ IR ≤ 5 mA
At Constant Temperature
IR = 1 mA
2.5
3
14
mV
0.5
0.6
Ω
+10
+10
mV/°C
Time Constant
Still Air
80
10
1
80
10
1
sec
sec
100 ft/Min Air
Stirred Oil
TC = 125°C
sec
Time Stability
0.2
0.2
°C/khr
(1) Accuracy measurements are made in a well-stirred oil bath. For other conditions, self heating must be considered.
Thermal Resistance
8-Pin SOIC
165°C/W
N/A
TO-92
TO
θJA (Junction to Ambient)
θJC (Junction to Case)
202°C/W
170°C/W
400°C/W
N/A
CONNECTION DIAGRAMS
Figure 1. 8-Pin SOIC
Figure 2. TO-92
Plastic Package
Bottom View
Figure 3. TO
Metal Can Package
Bottom View
(1)
Surface Mount Package
Top View
Package Number M08A
Package Z03A
Package Number H03H
(1) Case is connected to negative pin.
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
SNIS160D –MAY 1999–REVISED MARCH 2013
www.ti.com
Typical Performance Characteristics
Reverse Voltage Change
Calibrated Error
Figure 4.
Figure 5.
Reverse Characteristics
Response Time
Figure 6.
Figure 7.
Dynamic Impedance
Noise Voltage
Figure 8.
Figure 9.
4
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
www.ti.com
SNIS160D –MAY 1999–REVISED MARCH 2013
Typical Performance Characteristics (continued)
Thermal Resistance Junction to Air
Thermal Time Constant
Figure 10.
Figure 11.
Thermal Response in Still Air
Thermal Response in Stirred Oil Bath
Figure 12.
Figure 13.
Forward Characteristics
Figure 14.
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
SNIS160D –MAY 1999–REVISED MARCH 2013
www.ti.com
APPLICATION INFORMATION
CALIBRATING THE LM135
Included on the LM135 chip is an easy method of calibrating the device for higher accuracies. A pot connected
across the LM135 with the arm tied to the adjustment terminal allows a 1-point calibration of the sensor that
corrects for inaccuracy over the full temperature range.
This single point calibration works because the output of the LM135 is proportional to absolute temperature with
the extrapolated output of sensor going to 0V output at 0°K (−273.15°C). Errors in output voltage versus
temperature are only slope (or scale factor) errors so a slope calibration at one temperature corrects at all
temperatures.
The output of the device (calibrated or uncalibrated) can be expressed as:
(1)
where T is the unknown temperature and To is a reference temperature, both expressed in degrees Kelvin. By
calibrating the output to read correctly at one temperature the output at all temperatures is correct. Nominally the
output is calibrated at 10 mV/°K.
To insure good sensing accuracy several precautions must be taken. Like any temperature sensing device, self
heating can reduce accuracy. The LM135 should be operated at the lowest current suitable for the application.
Sufficient current, of course, must be available to drive both the sensor and the calibration pot at the maximum
operating temperature as well as any external loads.
If the sensor is used in an ambient where the thermal resistance is constant, self heating errors can be calibrated
out. This is possible if the device is run with a temperature stable current. Heating will then be proportional to
zener voltage and therefore temperature. This makes the self heating error proportional to absolute temperature
the same as scale factor errors.
WATERPROOFING SENSORS
Meltable inner core heat shrinkable tubing such as manufactured by Raychem can be used to make low-cost
waterproof sensors. The LM335 is inserted into the tubing about ½″ from the end and the tubing heated above
the melting point of the core. The unfilled ½″ end melts and provides a seal over the device.
Typical Applications
Figure 15. Basic Temperature Sensor
Figure 17. Wide Operating Supply
Figure 16. Calibrated Sensor
*Calibrate for 2.982V at 25°C
6
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
www.ti.com
SNIS160D –MAY 1999–REVISED MARCH 2013
Figure 18. Minimum Temperature Sensing
Figure 20. Remote Temperature Sensing
Wire length for 1°C error due to wire drop
Figure 19. Average Temperature Sensing
IR = 1 mA
IR = 0.5 mA(1)
FEET
8000
AWG
14
FEET
4000
2500
1600
1000
625
16
5000
18
3200
20
2000
22
1250
24
400
800
(1) For IR = 0.5 mA, the trim pot must be deleted.
Figure 21. Isolated Temperature Sensor
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
SNIS160D –MAY 1999–REVISED MARCH 2013
www.ti.com
Figure 22. Simple Temperature Controller
Figure 23. Simple Temperature Control
Figure 24. Ground Referred Fahrenheit Thermometer
*Adjust R2 for 2.554V across LM336.
Adjust R1 for correct output.
Figure 25. Centigrade Thermometer
*Adjust for 2.7315V at output of LM308
8
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
www.ti.com
SNIS160D –MAY 1999–REVISED MARCH 2013
Figure 26. Fahrenheit Thermometer
*To calibrate adjust R2 for 2.554V across LM336.
Adjust R1 for correct output.
Figure 27. THERMOCOUPLE COLD JUNCTION COMPENSATION
Compensation for Grounded Thermocouple
*Select R3 for proper thermocouple type
THERMO-COUPLE
R3 (±1%)
SEEBECK COEFFICIENT
52.3 μV/°C
J
T
K
S
377Ω
308Ω
293Ω
45.8Ω
42.8 μV/°C
40.8 μV/°C
6.4 μV/°C
Adjustments: Compensates for both sensor and resistor tolerances
1. Short LM329B
2. Adjust R1 for Seebeck Coefficient times ambient temperature (in degrees K) across R3.
3. Short LM335 and adjust R2 for voltage across R3 corresponding to thermocouple type.
J
14.32 mV
11.79 mV
K
S
11.17 mV
1.768 mV
T
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
SNIS160D –MAY 1999–REVISED MARCH 2013
www.ti.com
Figure 28. Single Power Supply Cold Junction Compensation
*Select R3 and R4 for thermocouple type
THERMO-COUPLE
R3
R4
SEEBECK COEFFICIENT
J
T
K
S
1.05K
856Ω
816Ω
128Ω
385Ω
315Ω
300Ω
46.3Ω
52.3 μV/°C
42.8 μV/°C
40.8 μV/°C
6.4 μV/°C
Adjustments:
1. Adjust R1 for the voltage across R3 equal to the Seebeck Coefficient times ambient temperature in degrees Kelvin.
2. Adjust R2 for voltage across R4 corresponding to thermocouple.
J
T
K
S
14.32 mV
11.79 mV
11.17 mV
1.768 mV
10
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
www.ti.com
SNIS160D –MAY 1999–REVISED MARCH 2013
Figure 29. Centigrade Calibrated Thermocouple Thermometer
Terminate thermocouple reference junction in close proximity to LM335.
Adjustments:
1. Apply signal in place of thermocouple and adjust R3 for a gain of 245.7.
2. Short non-inverting input of LM308A and output of LM329B to ground.
3. Adjust R1 so that VOUT = 2.982V @ 25°C.
4. Remove short across LM329B and adjust R2 so that VOUT = 246 mV @ 25°C.
5. Remove short across thermocouple.
Figure 30. Fast Charger for Nickel-Cadmium Batteries
†Adjust D1 to 50 mV greater VZ than D2.
Charge terminates on 5°C temperature rise. Couple D2 to battery.
Figure 31. Differential Temperature Sensor
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
SNIS160D –MAY 1999–REVISED MARCH 2013
www.ti.com
Figure 32. Differential Temperature Sensor
Figure 33. Variable Offset Thermometer‡
†Adjust for zero with sensor at 0°C and 10T pot set at 0°C
*Adjust for zero output with 10T pot set at 100°C and sensor at 100°C
‡Output reads difference between temperature and dial setting of 10T pot
12
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
www.ti.com
SNIS160D –MAY 1999–REVISED MARCH 2013
Figure 34. Ground Referred Centigrade Thermometer
Figure 35. Air Flow Detector*
*Self heating is used to detect air flow
DEFINITION OF TERMS
Operating Output Voltage: The voltage appearing across the positive and negative terminals of the device at
specified conditions of operating temperature and current.
Uncalibrated Temperature Error: The error between the operating output voltage at 10 mV/°K and case
temperature at specified conditions of current and case temperature.
Calibrated Temperature Error: The error between operating output voltage and case temperature at 10 mV/°K
over a temperature range at a specified operating current with the 25°C error adjusted to zero.
Copyright © 1999–2013, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
LM135, LM135A, LM235, LM235A, LM335, LM335A
SNIS160D –MAY 1999–REVISED MARCH 2013
www.ti.com
REVISION HISTORY
Changes from Revision C (March 2013) to Revision D
Page
•
Changed layout of National Data Sheet to TI format .......................................................................................................... 13
14
Submit Documentation Feedback
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM135 LM135A LM235 LM235A LM335 LM335A
PACKAGE OPTION ADDENDUM
www.ti.com
9-Jun-2013
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
LM135AH
ACTIVE
TO
TO
NDV
3
3
1000
TBD
Call TI
Call TI
-55 to 150
-55 to 150
LM135AH
LM135AH/NOPB
ACTIVE
NDV
1000
Green (RoHS POST-PLATE
& no Sb/Br)
Level-1-NA-UNLIM
LM135AH
LM135H
ACTIVE
ACTIVE
TO
TO
NDV
NDV
3
3
1000
1000
TBD
Call TI
Call TI
-55 to 150
-55 to 150
LM135H
LM135H
LM135H/NOPB
Green (RoHS POST-PLATE
& no Sb/Br)
Level-1-NA-UNLIM
LM235AH
ACTIVE
ACTIVE
TO
TO
NDV
NDV
3
3
1000
1000
TBD
Call TI
Call TI
-40 to 125
-40 to 125
LM235AH
LM235AH
LM235AH/NOPB
Green (RoHS POST-PLATE
& no Sb/Br)
Level-1-NA-UNLIM
LM235H
ACTIVE
ACTIVE
TO
TO
NDV
NDV
3
3
1000
1000
TBD
Call TI
Call TI
-40 to 125
-40 to 125
LM235H
LM235H
LM235H/NOPB
Green (RoHS POST-PLATE
& no Sb/Br)
Level-1-NA-UNLIM
LM335A MWC
ACTIVE WAFERSALE
YS
0
1
Green (RoHS
& no Sb/Br)
Call TI
Level-1-NA-UNLIM
LM335AH
ACTIVE
ACTIVE
TO
TO
NDV
NDV
3
3
1000
1000
TBD
Call TI
Call TI
-40 to 100
-40 to 100
LM335AH
LM335AH
LM335AH/NOPB
Green (RoHS POST-PLATE
& no Sb/Br)
Level-1-NA-UNLIM
LM335AM
LM335AM/NOPB
LM335AMX
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
TO-92
TO-92
TO
D
D
8
8
8
8
3
3
3
95
TBD
Call TI
CU SN
Call TI
CU SN
SN
Call TI
-40 to 100
-40 to 100
-40 to 100
-40 to 100
LM335
AM
95
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Call TI
LM335
AM
D
2500
2500
2000
1800
1000
TBD
LM335
AM
LM335AMX/NOPB
LM335AZ/LFT1
LM335AZ/NOPB
LM335H
D
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Level-1-NA-UNLIM
Level-1-NA-UNLIM
Call TI
LM335
AM
LP
LP
NDV
Green (RoHS
& no Sb/Br)
LM335
AZ
Green (RoHS
& no Sb/Br)
SNCU
Call TI
-40 to 100
-40 to 100
LM335
AZ
TBD
LM335H
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
9-Jun-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
-40 to 100
-40 to 100
-40 to 100
-40 to 100
-40 to 100
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
LM335H/NOPB
LM335M
ACTIVE
TO
NDV
3
8
8
8
8
3
3
1000
Green (RoHS POST-PLATE
& no Sb/Br)
Level-1-NA-UNLIM
LM335H
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SOIC
SOIC
SOIC
SOIC
TO-92
TO-92
D
D
95
TBD
Call TI
CU SN
Call TI
CU SN
SNCU
SNCU
Call TI
LM335
M
LM335M/NOPB
LM335MX
95
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Call TI
LM335
M
D
2500
2500
2000
1800
TBD
LM335
M
LM335MX/NOPB
LM335Z/LFT7
LM335Z/NOPB
D
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Level-1-NA-UNLIM
Level-1-NA-UNLIM
LM335
M
LP
LP
Green (RoHS
& no Sb/Br)
LM335
Z
Green (RoHS
& no Sb/Br)
-40 to 100
LM335
Z
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
9-Jun-2013
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
21-Mar-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
LM335AMX
LM335AMX/NOPB
LM335MX
SOIC
SOIC
SOIC
SOIC
D
D
D
D
8
8
8
8
2500
2500
2500
2500
330.0
330.0
330.0
330.0
12.4
12.4
12.4
12.4
6.5
6.5
6.5
6.5
5.4
5.4
5.4
5.4
2.0
2.0
2.0
2.0
8.0
8.0
8.0
8.0
12.0
12.0
12.0
12.0
Q1
Q1
Q1
Q1
LM335MX/NOPB
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
21-Mar-2013
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
LM335AMX
LM335AMX/NOPB
LM335MX
SOIC
SOIC
SOIC
SOIC
D
D
D
D
8
8
8
8
2500
2500
2500
2500
367.0
367.0
367.0
367.0
367.0
367.0
367.0
367.0
35.0
35.0
35.0
35.0
LM335MX/NOPB
Pack Materials-Page 2
MECHANICAL DATA
NDV0003H
H03H (Rev F)
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号:
LM135H-MLS
Analog Temperature Sensor, ANALOG TEMP SENSOR-VOLTAGE, 0.002V, 1Cel, ROUND, THROUGH HOLE MOUNT, METAL CAN, TO-46, 3 PIN
NSC
LM135ZT
ANALOG TEMP SENSOR-VOLTAGE, 2.95-3.01V, 1Cel, ROUND, THROUGH HOLE MOUNT, PLASTIC, TO-92, 3 PIN
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明