5962R8754903V9A [TI]

航天类 4 通道、2 输入、2V 至 6V 与非门 | KGD | 0 | -55 to 125;


型号：	5962R8754903V9A
厂家：	TEXAS INSTRUMENTS
描述：	航天类 4 通道、2 输入、2V 至 6V 与非门 \| KGD \| 0 \| -55 to 125 栅栅极
文件：	总7页 (文件大小：221K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SN54AC00-SP

www.ti.com ............................................................................................................................................................................................. SCHS367–OCTOBER 2008

RAD-TOLERANT CLASS V, QUADRUPLE 2-INPUT POSITIVE-NAND GATE

FEATURES

•

2-V to 6-V V_CCOperation

Inputs Accept Voltages to 6 V

Max t_pdof 7 ns at 5 V

(1)

Rad-Tolerant: 50 KRad(Si) TID

–

TID Dose Rate < 2 mRad/sec

•

QML-V Qualified, SMD 5962-87549

(1) Radiation tolerance is a typical value based upon initial device qualification. Radiation Lot Acceptance Testing is available - contact

factory for details.

J OR W PACKAGE

(TOP VIEW)

V_CC

GND

DESCRIPTION/ORDERING INFORMATION

The SN54AC00 device contains four independent 2-input NAND gates. Each gate performs the Boolean function

of Y = A • B or Y = A + B in positive logic.

ORDERING INFORMATION

T_A

PACKAGE⁽¹⁾⁽²⁾

Tube

ORDERABLE PART NUMBER

5962-8754903VCA

5962-8754903VDA

TOP-SIDE MARKING

5962-8754903VCA

5962-8754903VDA

CDIP – J

CFP – W

–55°C to 125°C

Tube

(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com.

FUNCTION TABLE

(Each Gate)

INPUTS

OUTPUT

LOGIC DIAGRAM (POSITIVE LOGIC)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

On products compliant to MIL-PRF-38535, all parameters are

tested unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

SN54AC00-SP

SCHS367–OCTOBER 2008 ............................................................................................................................................................................................. www.ti.com

ABSOLUTE MAXIMUM RATINGS⁽¹⁾

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

V_CC

V_I

Supply voltage range

Input voltage range⁽²⁾

–0.5

–0.5 V_CC+ 0.5

V_O

I_IK

Output voltage range⁽²⁾

–0.5 V_CC+ 0.5

Input clamp current

V_I< 0 or V_I> V_CC

V_O< 0 or V_O> V_CC

V_O= 0 to V_CC

±20

I_OK

I_O

Output clamp current

Continuous output current

Continuous current through V_CCor GND

±50

±200

J package

W package

θ_JA

Package thermal impedance⁽³⁾

Storage temperature range

°C/W

°C

T_stg

–65

150

(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating

conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.

(2) The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

(3) The package thermal impedance is calculated in accordance with JESD 51-7.

RECOMMENDED OPERATING CONDITIONS

MIN

MAX

UNIT

V_CC

Supply voltage

V_CC= 3 V

2.1

V_IH

High-level input voltage

V_CC= 4.5 V

V_CC= 5.5 V

V_CC= 3 V

3.15

3.85

0.9

1.35

1.65

V_CC

V_IL

Low-level input voltage

V_CC= 4.5 V

V_CC= 5.5 V

V_I

Input voltage

V_O

Output voltage

V_CC= 3 V

I_OH

High-level output current

Low-level output current

V_CC= 4.5 V

V_CC= 5.5 V

V_CC= 3 V

I_OL

V_CC= 4.5 V

V_CC= 5.5 V

Δt/Δv

Input transition rise or fall rate

Operating free-air temperature

ns/V

°C

T_A

–55

125

Submit Documentation Feedback

Product Folder Link(s): SN54AC00-SP

SN54AC00-SP

ELECTRICAL CHARACTERISTICS

over recommended operating free-air temperature range (unless otherwise noted)

T_A= 25°C

PARAMETER

TEST CONDITIONS

V_CC

MIN

MAX UNIT

MIN

2.9

TYP

MAX

3 V

2.9

4.4

I_OH= –50 µA

4.5 V

5.5 V

3 V

4.4

5.4

V_OH

I_OH= –12 mA

I_OH= –24 mA

I_OH= –50 mA⁽¹⁾

2.56

3.86

4.86

2.4

4.5 V

5.5 V

3 V

3.7

4.7

3.85

0.1

I_OL= 50 µA

4.5 V

5.5 V

3 V

0.1

V_OL

I_OL= 12 mA

I_OL= 24 mA

I_OL= 50 mA⁽¹⁾

0.36

0.5

1.65

±1

4.5 V

5.5 V

5 V

I_I

V_I= V_CCor GND

±0.1

µA

I_CC

C_i

V_I= V_CCor GND, I_O= 0

V_I= V_CCor GND

2.6

(1) Not more than one output should be tested at a time, and the duration of the test should not exceed 2 ms.

SWITCHING CHARACTERISTICS

over recommended operating free-air temperature range, V_CC= 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)

T_A= 25°C

FROM

(INPUT)

(OUTPUT)

PARAMETER

MIN

MAX

UNIT

MIN

TYP

MAX

9.5

t_PLH

t_PHL

A or B

1.5

5.5

SWITCHING CHARACTERISTICS

over recommended operating free-air temperature range, V_CC= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)

T_A= 25°C

FROM

(INPUT)

(OUTPUT)

PARAMETER

MIN

MAX

UNIT

MIN

1.5

TYP

MAX

t_PLH

t_PHL

8.5

A or B

1.5

4.5

6.5

OPERATING CHARACTERISTICS

V_CC= 5 V, T_A= 25°C

PARAMETER

TEST CONDITIONS

TYP

UNIT

C_pd

Power dissipation capacitance

C_L= 50 pF, f = 1 MHz

Submit Documentation Feedback

Product Folder Link(s): SN54AC00-SP

SN54AC00-SP

PARAMETER MEASUREMENT INFORMATION

TEST

Input

(see Note B)

50% V

Open

PLH PHL

0 V

PHL

PLH

PHL

2 × V

In-Phase

Output

50% V

500 Ω

Open

From Output

Under Test

PLH

C = 50 pF

(see Note A)

500 Ω

Out-of-Phase

Output

50% V

LOAD CIRCUIT

NOTES: A. C includes probe and jig capacitance.

VOLTAGE WAVEFORMS

B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, Z = 50 Ω, t ≤ 2.5 ns, t ≤ 2.5 ns.

C. The outputs are measured one at a time with one input transition per measurement.

Figure 1. Load Circuit and Voltage Waveforms

Submit Documentation Feedback

Product Folder Link(s): SN54AC00-SP

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,

and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should

obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are

sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard

warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where

mandated by government requirements, testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and

applications using TI components. To minimize the risks associated with customer products and applications, customers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,

or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information

published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a

warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual

property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied

by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive

business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional

restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all

express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not

responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably

be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing

such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products

and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be

provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in

such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are

specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military

specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at

the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are

designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated

products in automotive applications, TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products

Applications

Audio

Automotive

Broadband

Digital Control

Medical

Amplifiers

Data Converters

DSP

Clocks and Timers

Interface

amplifier.ti.com

dataconverter.ti.com

dsp.ti.com

www.ti.com/clocks

interface.ti.com

logic.ti.com

www.ti.com/audio

www.ti.com/automotive

www.ti.com/broadband

www.ti.com/digitalcontrol

www.ti.com/medical

www.ti.com/military

Logic

Military

Power Mgmt

Microcontrollers

RFID

power.ti.com

microcontroller.ti.com

www.ti-rfid.com

Optical Networking

Security

Telephony

Video & Imaging

Wireless

www.ti.com/opticalnetwork

www.ti.com/security

www.ti.com/telephony

www.ti.com/video

RF/IF and ZigBee® Solutions www.ti.com/lprf

www.ti.com/wireless

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

5962R8754903V9A [TI]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E